Control class for CC1101 module. More...

#include <CC1101.h>

Inheritance diagram for CC1101:

Public Member Functions
	CC1101 (Module *module)
	Default constructor. More...

Module *	getMod ()

int16_t	begin (float freq=RADIOLIB_CC1101_DEFAULT_FREQ, float br=RADIOLIB_CC1101_DEFAULT_BR, float freqDev=RADIOLIB_CC1101_DEFAULT_FREQDEV, float rxBw=RADIOLIB_CC1101_DEFAULT_RXBW, int8_t pwr=RADIOLIB_CC1101_DEFAULT_POWER, uint8_t preambleLength=RADIOLIB_CC1101_DEFAULT_PREAMBLELEN)
	Initialization method. More...

void	reset ()
	Reset method - resets the chip using manual reset sequence (without RESET pin).

int16_t	transmit (uint8_t *data, size_t len, uint8_t addr=0) override
	Blocking binary transmit method. Overloads for string-based transmissions are implemented in PhysicalLayer. More...

int16_t	receive (uint8_t *data, size_t len) override
	Blocking binary receive method. Overloads for string-based transmissions are implemented in PhysicalLayer. More...

int16_t	standby () override
	Sets the module to standby mode. More...

int16_t	standby (uint8_t mode) override
	Sets the module to standby. More...

int16_t	transmitDirect (uint32_t frf=0) override
	Starts direct mode transmission. More...

int16_t	receiveDirect () override
	Starts direct mode reception. More...

int16_t	transmitDirectAsync (uint32_t frf=0)
	Starts asynchronous direct mode transmission. More...

int16_t	receiveDirectAsync ()
	Starts asynchronous direct mode reception. More...

int16_t	packetMode ()
	Stops direct mode. It is required to call this method to switch from direct transmissions to packet-based transmissions.

void	setGdo0Action (void(*func)(void), uint32_t dir)
	Sets interrupt service routine to call when GDO0 activates. More...

void	clearGdo0Action ()
	Clears interrupt service routine to call when GDO0 activates.

void	setGdo2Action (void(*func)(void), uint32_t dir)
	Sets interrupt service routine to call when GDO2 activates. More...

void	clearGdo2Action ()
	Clears interrupt service routine to call when GDO0 activates.

void	setPacketReceivedAction (void(*func)(void))
	Sets interrupt service routine to call when a packet is received. More...

void	clearPacketReceivedAction ()
	Clears interrupt service routine to call when a packet is received.

void	setPacketSentAction (void(*func)(void))
	Sets interrupt service routine to call when a packet is sent. More...

void	clearPacketSentAction ()
	Clears interrupt service routine to call when a packet is sent.

int16_t	startTransmit (uint8_t *data, size_t len, uint8_t addr=0) override
	Interrupt-driven binary transmit method. Overloads for string-based transmissions are implemented in PhysicalLayer. More...

int16_t	finishTransmit () override
	Clean up after transmission is done. More...

int16_t	startReceive ()
	Interrupt-driven receive method. GDO0 will be activated when full packet is received. More...

int16_t	startReceive (uint32_t timeout, uint16_t irqFlags, uint16_t irqMask, size_t len)
	Interrupt-driven receive method, implemented for compatibility with PhysicalLayer. More...

int16_t	readData (uint8_t *data, size_t len) override
	Reads data received after calling startReceive method. More...

int16_t	setFrequency (float freq)
	Sets carrier frequency. Allowed values are in bands 300.0 to 348.0 MHz, 387.0 to 464.0 MHz and 779.0 to 928.0 MHz. More...

int16_t	setBitRate (float br)
	Sets bit rate. Allowed values range from 0.025 to 600.0 kbps. More...

int16_t	setRxBandwidth (float rxBw)
	Sets receiver bandwidth. Allowed values range from 58.0 to 812.0 kHz. More...

int16_t	setFrequencyDeviation (float freqDev) override
	Sets frequency deviation. Allowed values range from 1.587 to 380.8 kHz. More...

int16_t	getFrequencyDeviation (float *freqDev)
	Gets frequency deviation. More...

int16_t	setOutputPower (int8_t pwr)
	Sets output power. Allowed values are -30, -20, -15, -10, 0, 5, 7 or 10 dBm. More...

int16_t	setSyncWord (uint8_t syncH, uint8_t syncL, uint8_t maxErrBits=0, bool requireCarrierSense=false)
	Sets 16-bit sync word as a two byte value. More...

int16_t	setSyncWord (uint8_t *syncWord, uint8_t len, uint8_t maxErrBits=0, bool requireCarrierSense=false)
	Sets 1 or 2 bytes of sync word. More...

int16_t	setPreambleLength (uint8_t preambleLength, uint8_t qualityThreshold)
	Sets preamble length. More...

int16_t	setNodeAddress (uint8_t nodeAddr, uint8_t numBroadcastAddrs=0)
	Sets node and broadcast addresses. Calling this method will also enable address filtering. More...

int16_t	disableAddressFiltering ()
	Disables address filtering. Calling this method will also erase previously set addresses. More...

int16_t	setOOK (bool enableOOK)
	Enables/disables OOK modulation instead of FSK. More...

float	getRSSI ()
	Gets RSSI (Recorded Signal Strength Indicator) of the last received packet. In asynchronous direct mode, returns the current RSSI level. More...

uint8_t	getLQI () const
	Gets LQI (Link Quality Indicator) of the last received packet. More...

size_t	getPacketLength (bool update=true) override
	Query modem for the packet length of received payload. More...

int16_t	fixedPacketLengthMode (uint8_t len=RADIOLIB_CC1101_MAX_PACKET_LENGTH)
	Set modem in fixed packet length mode. More...

int16_t	variablePacketLengthMode (uint8_t maxLen=RADIOLIB_CC1101_MAX_PACKET_LENGTH)
	Set modem in variable packet length mode. More...

int16_t	enableSyncWordFiltering (uint8_t maxErrBits=0, bool requireCarrierSense=false)
	Enable sync word filtering and generation. More...

int16_t	disableSyncWordFiltering (bool requireCarrierSense=false)
	Disable preamble and sync word filtering and generation. More...

int16_t	setCrcFiltering (bool enable=true)
	Enable CRC filtering and generation. More...

int16_t	setPromiscuousMode (bool enable=true)
	Set modem in "sniff" mode: no packet filtering (e.g., no preamble, sync word, address, CRC). More...

bool	getPromiscuousMode ()
	Get whether the modem is in promiscuous mode: no packet filtering (e.g., no preamble, sync word, address, CRC). More...

int16_t	setDataShaping (uint8_t sh) override
	Sets Gaussian filter bandwidth-time product that will be used for data shaping. Allowed value is RADIOLIB_SHAPING_0_5. Set to RADIOLIB_SHAPING_NONE to disable data shaping. More...

int16_t	setEncoding (uint8_t encoding) override
	Sets transmission encoding. Allowed values are RADIOLIB_ENCODING_NRZ, RADIOLIB_ENCODING_MANCHESTER, and RADIOLIB_ENCODING_WHITENING. Note that encoding on CC1101 is applied to the entire stream including preamble, sync word, and CRC. More...

void	setRfSwitchPins (uint32_t rxEn, uint32_t txEn)
	Some modules contain external RF switch controlled by pins. This function gives RadioLib control over those pins to automatically switch between various modes: When idle both pins will be LOW, during TX the `txEn` pin will be HIGH, during RX the `rxPin` will be HIGH. More...

void	setRfSwitchTable (const uint32_t(&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[])
	Some modules contain external RF switch controlled by pins. This function gives RadioLib control over those pins to automatically switch between various modes. More...

uint8_t	randomByte ()
	Get one truly random byte from RSSI noise. More...

int16_t	getChipVersion ()
	Read version SPI register. Should return CC1101_VERSION_LEGACY (0x04) or CC1101_VERSION_CURRENT (0x14) if CC1101 is connected and working. More...

void	setDirectAction (void(*func)(void))
	Set interrupt service routine function to call when data bit is receveid in direct mode. More...

void	readBit (uint32_t pin)
	Function to read and process data bit in direct reception mode. More...

int16_t	setDIOMapping (uint32_t pin, uint32_t value)
	Configure DIO pin mapping to get a given signal on a DIO pin (if available). More...

int16_t	transmit (const char *str, uint8_t addr=0)
	C-string transmit method. More...

virtual int16_t	transmit (uint8_t *data, size_t len, uint8_t addr=0)
	Binary transmit method. Must be implemented in module class. More...

virtual int16_t	receive (uint8_t *data, size_t len)
	Binary receive method. Must be implemented in module class. More...

int16_t	startTransmit (const char *str, uint8_t addr=0)
	Interrupt-driven Arduino String transmit method. Unlike the standard transmit method, this one is non-blocking. Interrupt pin will be activated when transmission finishes. More...

virtual int16_t	startTransmit (uint8_t *data, size_t len, uint8_t addr=0)
	Interrupt-driven binary transmit method. More...

virtual int16_t	readData (uint8_t *data, size_t len)
	Reads data that was received after calling startReceive method. More...

Public Member Functions inherited from PhysicalLayer
	PhysicalLayer (float step, size_t maxLen)
	Default constructor. More...

int16_t	transmit (const char *str, uint8_t addr=0)
	C-string transmit method. More...

virtual int16_t	sleep ()
	Sets module to sleep. More...

int16_t	startTransmit (const char *str, uint8_t addr=0)
	Interrupt-driven Arduino String transmit method. Unlike the standard transmit method, this one is non-blocking. Interrupt pin will be activated when transmission finishes. More...

virtual int16_t	invertIQ (bool enable)
	Set IQ inversion. Must be implemented in module class if the module supports it. More...

virtual int16_t	setSyncWord (uint8_t *sync, size_t len)
	Set sync word. Must be implemented in module class if the module supports it. More...

virtual int16_t	setPreambleLength (size_t len)
	Set preamble length. Must be implemented in module class if the module supports it. More...

virtual int16_t	setDataRate (DataRate_t dr)
	Set data. Must be implemented in module class if the module supports it. More...

float	getFreqStep () const
	Gets the module frequency step size that was set in constructor. More...

virtual float	getSNR ()
	Gets SNR (Signal to Noise Ratio) of the last received packet. Only available for LoRa modem. More...

int32_t	random (int32_t max)
	Get truly random number in range 0 - max. More...

int32_t	random (int32_t min, int32_t max)
	Get truly random number in range min - max. More...

int16_t	startDirect ()
	Configure module parameters for direct modes. Must be called prior to "ham" modes like RTTY or AX.25. Only available in FSK mode. More...

int16_t	setDirectSyncWord (uint32_t syncWord, uint8_t len)
	Set sync word to be used to determine start of packet in direct reception mode. More...

int16_t	available ()
	Get the number of direct mode bytes currently available in buffer. More...

void	dropSync ()
	Forcefully drop synchronization.

uint8_t	read (bool drop=true)
	Get data from direct mode buffer. More...

Detailed Description

Control class for CC1101 module.

Constructor & Destructor Documentation

◆ CC1101()

CC1101::CC1101 ( Module * module )

Default constructor.

Parameters

mod	Instance of Module that will be used to communicate with the radio.

Member Function Documentation

◆ begin()

int16_t CC1101::begin	(	float	freq = `RADIOLIB_CC1101_DEFAULT_FREQ`,
		float	br = `RADIOLIB_CC1101_DEFAULT_BR`,
		float	freqDev = `RADIOLIB_CC1101_DEFAULT_FREQDEV`,
		float	rxBw = `RADIOLIB_CC1101_DEFAULT_RXBW`,
		int8_t	pwr = `RADIOLIB_CC1101_DEFAULT_POWER`,
		uint8_t	preambleLength = `RADIOLIB_CC1101_DEFAULT_PREAMBLELEN`
	)

Initialization method.

Parameters

freq	Carrier frequency in MHz. Defaults to 434 MHz.
br	Bit rate to be used in kbps. Defaults to 4.8 kbps.
freqDev	Frequency deviation from carrier frequency in kHz Defaults to 5.0 kHz.
rxBw	Receiver bandwidth in kHz. Defaults to 135.0 kHz.
pwr	Output power in dBm. Defaults to 10 dBm.
preambleLength	Preamble Length in bits. Defaults to 16 bits.

Returns: Status Codes

◆ disableAddressFiltering()

int16_t CC1101::disableAddressFiltering ( )

Disables address filtering. Calling this method will also erase previously set addresses.

Returns: Status Codes

◆ disableSyncWordFiltering()

int16_t CC1101::disableSyncWordFiltering ( bool requireCarrierSense = false )

Disable preamble and sync word filtering and generation.

Parameters

requireCarrierSense Require carrier sense above threshold.

Returns: Status Codes

◆ enableSyncWordFiltering()

int16_t CC1101::enableSyncWordFiltering	(	uint8_t	maxErrBits = `0`,
		bool	requireCarrierSense = `false`
	)

Enable sync word filtering and generation.

Parameters

numBits	Sync word length in bits.
requireCarrierSense	Require carrier sense above threshold in addition to sync word.

Returns: Status Codes

◆ finishTransmit()

int16_t CC1101::finishTransmit ( )

overridevirtual

Clean up after transmission is done.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ fixedPacketLengthMode()

int16_t CC1101::fixedPacketLengthMode ( uint8_t len = RADIOLIB_CC1101_MAX_PACKET_LENGTH )

Set modem in fixed packet length mode.

Parameters

len	Packet length.

Returns: Status Codes

◆ getChipVersion()

int16_t CC1101::getChipVersion ( )

Read version SPI register. Should return CC1101_VERSION_LEGACY (0x04) or CC1101_VERSION_CURRENT (0x14) if CC1101 is connected and working.

Returns: Version register contents or Status Codes

◆ getFrequencyDeviation()

int16_t CC1101::getFrequencyDeviation ( float * freqDev )

Gets frequency deviation.

Parameters

[out] freqDev Pointer to variable where to save the frequency deviation.

Returns: Status Codes

◆ getLQI()

uint8_t CC1101::getLQI ( ) const

Gets LQI (Link Quality Indicator) of the last received packet.

Returns: Last packet LQI (lower is better).

◆ getPacketLength()

size_t CC1101::getPacketLength ( bool update = true )

overridevirtual

Query modem for the packet length of received payload.

Parameters

update Update received packet length. Will return cached value when set to false.

Returns: Length of last received packet in bytes.

Reimplemented from PhysicalLayer.

◆ getPromiscuousMode()

bool CC1101::getPromiscuousMode ( )

Get whether the modem is in promiscuous mode: no packet filtering (e.g., no preamble, sync word, address, CRC).

Returns: Whether the modem is in promiscuous mode.

◆ getRSSI()

float CC1101::getRSSI ( )

virtual

Gets RSSI (Recorded Signal Strength Indicator) of the last received packet. In asynchronous direct mode, returns the current RSSI level.

Returns: RSSI in dBm.

Reimplemented from PhysicalLayer.

◆ randomByte()

uint8_t CC1101::randomByte ( )

virtual

Get one truly random byte from RSSI noise.

Returns: TRNG byte.

Reimplemented from PhysicalLayer.

◆ readBit()

void CC1101::readBit ( uint32_t pin )

virtual

Function to read and process data bit in direct reception mode.

Parameters

pin	Pin on which to read.

Reimplemented from PhysicalLayer.

◆ readData() [1/2]

int16_t PhysicalLayer::readData

Reads data that was received after calling startReceive method.

Parameters

data	Pointer to array to save the received binary data.
len	Number of bytes that will be read. When set to 0, the packet length will be retrieved automatically. When more bytes than received are requested, only the number of bytes requested will be returned.

Returns: Status Codes

◆ readData() [2/2]

int16_t CC1101::readData	(	uint8_t *	data,
		size_t	len
	)

overridevirtual

Reads data received after calling startReceive method.

Parameters

data	Pointer to array to save the received binary data.
len	Number of bytes that will be read. When set to 0, the packet length will be retreived automatically. When more bytes than received are requested, only the number of bytes requested will be returned.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ receive() [1/2]

int16_t PhysicalLayer::receive

Binary receive method. Must be implemented in module class.

Parameters

data	Pointer to array to save the received binary data.
len	Number of bytes that will be received. Must be known in advance for binary transmissions.

Returns: Status Codes

◆ receive() [2/2]

int16_t CC1101::receive	(	uint8_t *	data,
		size_t	len
	)

overridevirtual

Blocking binary receive method. Overloads for string-based transmissions are implemented in PhysicalLayer.

Parameters

data	Binary data to be sent.
len	Number of bytes to send.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ receiveDirect()

int16_t CC1101::receiveDirect ( )

overridevirtual

Starts direct mode reception.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ receiveDirectAsync()

int16_t CC1101::receiveDirectAsync ( )

Starts asynchronous direct mode reception.

Returns: Status Codes

◆ setBitRate()

int16_t CC1101::setBitRate ( float br )

virtual

Sets bit rate. Allowed values range from 0.025 to 600.0 kbps.

Parameters

br	Bit rate to be set in kbps.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ setCrcFiltering()

int16_t CC1101::setCrcFiltering ( bool enable = true )

Enable CRC filtering and generation.

Parameters

enable Set or unset CRC generation and filtering.

Returns: Status Codes

◆ setDataShaping()

int16_t CC1101::setDataShaping ( uint8_t sh )

overridevirtual

Sets Gaussian filter bandwidth-time product that will be used for data shaping. Allowed value is RADIOLIB_SHAPING_0_5. Set to RADIOLIB_SHAPING_NONE to disable data shaping.

Parameters

sh	Gaussian shaping bandwidth-time product that will be used for data shaping.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ setDIOMapping()

int16_t CC1101::setDIOMapping	(	uint32_t	pin,
		uint32_t	value
	)

virtual

Configure DIO pin mapping to get a given signal on a DIO pin (if available).

Parameters

pin	Pin number onto which a signal is to be placed.
value	The value that indicates which function to place on that pin. See chip datasheet for details.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ setDirectAction()

void CC1101::setDirectAction ( void(*)(void) func )

virtual

Set interrupt service routine function to call when data bit is receveid in direct mode.

Parameters

func	Pointer to interrupt service routine.

Reimplemented from PhysicalLayer.

◆ setEncoding()

int16_t CC1101::setEncoding ( uint8_t encoding )

overridevirtual

Sets transmission encoding. Allowed values are RADIOLIB_ENCODING_NRZ, RADIOLIB_ENCODING_MANCHESTER, and RADIOLIB_ENCODING_WHITENING. Note that encoding on CC1101 is applied to the entire stream including preamble, sync word, and CRC.

Parameters

encoding Encoding to be used.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ setFrequency()

int16_t CC1101::setFrequency ( float freq )

virtual

Sets carrier frequency. Allowed values are in bands 300.0 to 348.0 MHz, 387.0 to 464.0 MHz and 779.0 to 928.0 MHz.

Parameters

freq	Carrier frequency to be set in MHz.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ setFrequencyDeviation()

int16_t CC1101::setFrequencyDeviation ( float freqDev )

overridevirtual

Sets frequency deviation. Allowed values range from 1.587 to 380.8 kHz.

Parameters

freqDev Frequency deviation to be set in kHz.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ setGdo0Action()

void CC1101::setGdo0Action	(	void(*)(void)	func,
		uint32_t	dir
	)

Sets interrupt service routine to call when GDO0 activates.

Parameters

func	ISR to call.
dir	Signal change direction.

◆ setGdo2Action()

void CC1101::setGdo2Action	(	void(*)(void)	func,
		uint32_t	dir
	)

Sets interrupt service routine to call when GDO2 activates.

Parameters

func	ISR to call.
dir	Signal change direction.

◆ setNodeAddress()

int16_t CC1101::setNodeAddress	(	uint8_t	nodeAddr,
		uint8_t	numBroadcastAddrs = `0`
	)

Sets node and broadcast addresses. Calling this method will also enable address filtering.

Parameters

nodeAddr	Node address to be set.
numBroadcastAddrs	Number of broadcast addresses to be used. Can be set to 0 (no broadcast), 1 (broadcast at 0x00) or 2 (broadcast at 0x00 and 0xFF).

Returns: Status Codes

◆ setOOK()

int16_t CC1101::setOOK ( bool enableOOK )

Enables/disables OOK modulation instead of FSK.

Parameters

enableOOK Enable (true) or disable (false) OOK.

Returns: Status Codes

◆ setOutputPower()

int16_t CC1101::setOutputPower ( int8_t pwr )

virtual

Sets output power. Allowed values are -30, -20, -15, -10, 0, 5, 7 or 10 dBm.

Parameters

pwr	Output power to be set in dBm.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ setPacketReceivedAction()

void CC1101::setPacketReceivedAction ( void(*)(void) func )

virtual

Sets interrupt service routine to call when a packet is received.

Parameters

func	ISR to call.

Reimplemented from PhysicalLayer.

◆ setPacketSentAction()

void CC1101::setPacketSentAction ( void(*)(void) func )

virtual

Sets interrupt service routine to call when a packet is sent.

Parameters

func	ISR to call.

Reimplemented from PhysicalLayer.

◆ setPreambleLength()

int16_t CC1101::setPreambleLength	(	uint8_t	preambleLength,
		uint8_t	qualityThreshold
	)

Sets preamble length.

Parameters

preambleLength Preamble length to be set (in bits), allowed values: 16, 24, 32, 48, 64, 96, 128 and 192.

Returns: Status Codes

◆ setPromiscuousMode()

int16_t CC1101::setPromiscuousMode ( bool enable = true )

Set modem in "sniff" mode: no packet filtering (e.g., no preamble, sync word, address, CRC).

Parameters

enable Set or unset promiscuous mode.

Returns: Status Codes

◆ setRfSwitchPins()

void CC1101::setRfSwitchPins	(	uint32_t	rxEn,
		uint32_t	txEn
	)

Some modules contain external RF switch controlled by pins. This function gives RadioLib control over those pins to automatically switch between various modes: When idle both pins will be LOW, during TX the txEn pin will be HIGH, during RX the rxPin will be HIGH.

Radiolib will automatically set the pin mode and value of these pins, so do not control them from the sketch.

When more than two pins or more control over the output values are needed, use the setRfSwitchTable() function.

Parameters

rxEn	RX enable pin.
txEn	TX enable pin.

◆ setRfSwitchTable()

void CC1101::setRfSwitchTable	(	const uint32_t(&)	pins[Module::RFSWITCH_MAX_PINS],
		const Module::RfSwitchMode_t	table[]
	)

Some modules contain external RF switch controlled by pins. This function gives RadioLib control over those pins to automatically switch between various modes.

Radiolib will automatically set the pin mode and value of these pins, so do not control them from the sketch.

Parameters

pins	A reference to an array of pins to control. This should always be an array of 3 elements. If you need less pins, use RADIOLIB_NC for the unused elements.
table	A reference to an array of pin values to use for each supported mode. Each element is an RfSwitchMode_T struct that lists the mode for which it applies and the values for each of the pins passed in the pins argument respectively.

The pins array will be copied into the Module object, so the original array can be deallocated after this call. However, a reference to the table array will be stored, so that array must remain valid as long RadioLib is being used.

The mode field in each table row should normally use any of the MODE_* constants from the Module::OpMode_t enum. However, some radios support additional modes and will define their own OpMode_t enum.

The length of the table is variable (to support radios that add additional modes), so the table must always be terminated with the special END_OF_MODE_TABLE value.

Normally all modes should be listed in the table, but for some radios, modes can be omitted to indicate they are not supported (e.g. when a radio has a high power and low power TX mode but external circuitry only supports low power). If applicable, this is documented in the radio class itself.

Example

For example, on a board that has an RF switch with an enable pin connected to PA0 and a TX/RX select pin connected to PA1:

// In global scope, define the pin array and mode table
static const uint32_t rfswitch_pins[] =
                       {PA0,  PA1,  RADIOLIB_NC};
static const Module::RfSwitchMode_t rfswitch_table[] = {
  {Module::MODE_IDLE,  {LOW,  LOW}},
  {Module::MODE_RX,    {HIGH, LOW}},
  {Module::MODE_TX,    {HIGH, HIGH}},
   Module::END_OF_MODE_TABLE,
};
 
void setup() {
  ...
  // Then somewhere in setup, pass them to radiolib
  radio.setRfSwitchTable(rfswitch_pins, rfswitch_table);
  ...
}

◆ setRxBandwidth()

int16_t CC1101::setRxBandwidth ( float rxBw )

Sets receiver bandwidth. Allowed values range from 58.0 to 812.0 kHz.

Parameters

rxBw	Receiver bandwidth to be set in kHz.

Returns: Status Codes

◆ setSyncWord() [1/2]

int16_t CC1101::setSyncWord	(	uint8_t *	syncWord,
		uint8_t	len,
		uint8_t	maxErrBits = `0`,
		bool	requireCarrierSense = `false`
	)

Sets 1 or 2 bytes of sync word.

Parameters

syncWord	Pointer to the array of sync word bytes.
len	Sync word length in bytes.
maxErrBits	Maximum allowed number of bit errors in received sync word. Defaults to 0.
requireCarrierSense	Require carrier sense above threshold in addition to sync word.

Returns: Status Codes

◆ setSyncWord() [2/2]

int16_t CC1101::setSyncWord	(	uint8_t	syncH,
		uint8_t	syncL,
		uint8_t	maxErrBits = `0`,
		bool	requireCarrierSense = `false`
	)

Sets 16-bit sync word as a two byte value.

Parameters

syncH	MSB of the sync word.
syncL	LSB of the sync word.
maxErrBits	Maximum allowed number of bit errors in received sync word. Defaults to 0.
requireCarrierSense	Require carrier sense above threshold in addition to sync word.

Returns: Status Codes

◆ standby() [1/2]

int16_t CC1101::standby ( )

overridevirtual

Sets the module to standby mode.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ standby() [2/2]

int16_t CC1101::standby ( uint8_t mode )

overridevirtual

Sets the module to standby.

Parameters

mode	Standby mode to be used. No effect, implemented only for PhysicalLayer compatibility.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ startReceive() [1/2]

int16_t CC1101::startReceive ( )

virtual

Interrupt-driven receive method. GDO0 will be activated when full packet is received.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ startReceive() [2/2]

int16_t CC1101::startReceive	(	uint32_t	timeout,
		uint16_t	irqFlags,
		uint16_t	irqMask,
		size_t	len
	)

virtual

Interrupt-driven receive method, implemented for compatibility with PhysicalLayer.

Parameters

timeout	Ignored.
irqFlags	Ignored.
irqMask	Ignored.
len	Ignored.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ startTransmit() [1/3]

int16_t PhysicalLayer::startTransmit

Interrupt-driven Arduino String transmit method. Unlike the standard transmit method, this one is non-blocking. Interrupt pin will be activated when transmission finishes.

Parameters

str	C-string that will be transmitted.
addr	Node address to transmit the packet to. Only used in FSK mode.

Returns: Status Codes

◆ startTransmit() [2/3]

int16_t PhysicalLayer::startTransmit

Interrupt-driven binary transmit method.

Parameters

data	Binary data that will be transmitted.
len	Length of binary data to transmit (in bytes).
addr	Node address to transmit the packet to. Only used in FSK mode.

Returns: Status Codes

◆ startTransmit() [3/3]

int16_t CC1101::startTransmit	(	uint8_t *	data,
		size_t	len,
		uint8_t	addr = `0`
	)

overridevirtual

Interrupt-driven binary transmit method. Overloads for string-based transmissions are implemented in PhysicalLayer.

Parameters

data	Binary data to be sent.
len	Number of bytes to send.
addr	Address to send the data to. Will only be added if address filtering was enabled.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ transmit() [1/3]

int16_t PhysicalLayer::transmit

C-string transmit method.

Parameters

str	C-string that will be transmitted.
addr	Node address to transmit the packet to. Only used in FSK mode.

Returns: Status Codes

◆ transmit() [2/3]

int16_t PhysicalLayer::transmit

Binary transmit method. Must be implemented in module class.

Parameters

data	Binary data that will be transmitted.
len	Length of binary data to transmit (in bytes).
addr	Node address to transmit the packet to. Only used in FSK mode.

Returns: Status Codes

◆ transmit() [3/3]

int16_t CC1101::transmit	(	uint8_t *	data,
		size_t	len,
		uint8_t	addr = `0`
	)

overridevirtual

Blocking binary transmit method. Overloads for string-based transmissions are implemented in PhysicalLayer.

Parameters

data	Binary data to be sent.
len	Number of bytes to send.
addr	Address to send the data to. Will only be added if address filtering was enabled.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ transmitDirect()

int16_t CC1101::transmitDirect ( uint32_t frf = 0 )

overridevirtual

Starts direct mode transmission.

Parameters

frf	Raw RF frequency value. Defaults to 0, required for quick frequency shifts in RTTY.

Returns: Status Codes

Reimplemented from PhysicalLayer.

◆ transmitDirectAsync()

int16_t CC1101::transmitDirectAsync ( uint32_t frf = 0 )

Starts asynchronous direct mode transmission.

Parameters

frf	Raw RF frequency value. Defaults to 0, required for quick frequency shifts in RTTY.

Returns: Status Codes

◆ variablePacketLengthMode()

int16_t CC1101::variablePacketLengthMode ( uint8_t maxLen = RADIOLIB_CC1101_MAX_PACKET_LENGTH )

Set modem in variable packet length mode.

Parameters

len	Maximum packet length.

Returns: Status Codes

The documentation for this class was generated from the following files:

src/modules/CC1101/CC1101.h
src/modules/CC1101/CC1101.cpp

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ CC1101()

Member Function Documentation

◆ begin()

◆ disableAddressFiltering()

◆ disableSyncWordFiltering()

◆ enableSyncWordFiltering()

◆ finishTransmit()

◆ fixedPacketLengthMode()

◆ getChipVersion()

◆ getFrequencyDeviation()

◆ getLQI()

◆ getPacketLength()

◆ getPromiscuousMode()

◆ getRSSI()

◆ randomByte()

◆ readBit()

◆ readData() [1/2]

◆ readData() [2/2]

◆ receive() [1/2]

◆ receive() [2/2]

◆ receiveDirect()

◆ receiveDirectAsync()

◆ setBitRate()

◆ setCrcFiltering()

◆ setDataShaping()

◆ setDIOMapping()

◆ setDirectAction()

◆ setEncoding()

◆ setFrequency()

◆ setFrequencyDeviation()

◆ setGdo0Action()

◆ setGdo2Action()

◆ setNodeAddress()

◆ setOOK()

◆ setOutputPower()

◆ setPacketReceivedAction()

◆ setPacketSentAction()

◆ setPreambleLength()

◆ setPromiscuousMode()

◆ setRfSwitchPins()

◆ setRfSwitchTable()

Example

◆ setRxBandwidth()

◆ setSyncWord() [1/2]

◆ setSyncWord() [2/2]

◆ standby() [1/2]

◆ standby() [2/2]

◆ startReceive() [1/2]

◆ startReceive() [2/2]

◆ startTransmit() [1/3]

◆ startTransmit() [2/3]

◆ startTransmit() [3/3]

◆ transmit() [1/3]

◆ transmit() [2/3]

◆ transmit() [3/3]

◆ transmitDirect()

◆ transmitDirectAsync()

◆ variablePacketLengthMode()