Base class for Si443x series. All derived classes for Si443x (e.g. Si4431 or Si4432) inherit from this base class. This class should not be instantiated directly from Arduino sketch, only from its derived classes. More...

#include <Si443x.h>

Inheritance diagram for Si443x:

Public Member Functions
	Si443x (Module *mod)
	Default constructor. More...

int16_t	begin (float br, float freqDev, float rxBw, uint8_t preambleLen)
	Initialization method. More...

void	reset ()
	Reset method. Will reset the chip to the default state using SDN pin.

int16_t	transmit (uint8_t *data, size_t len, uint8_t addr=0) override
	Binary transmit method. Will transmit arbitrary binary data up to 64 bytes long. For overloads to transmit Arduino String or C-string, see PhysicalLayer::transmit. More...

int16_t	receive (uint8_t *data, size_t len) override
	Binary receive method. Will attempt to receive arbitrary binary data up to 64 bytes long. For overloads to receive Arduino String, see PhysicalLayer::receive. More...

int16_t	sleep ()
	Sets the module to sleep to save power. Module will not be able to transmit or receive any data while in sleep mode. Module will wake up automatically when methods like transmit or receive are called. More...

int16_t	standby () override
	Sets the module to standby. More...

int16_t	transmitDirect (uint32_t frf=0) override
	Enables direct transmission mode. While in direct mode, the module will not be able to transmit or receive packets. More...

int16_t	receiveDirect () override
	Enables direct reception mode. While in direct mode, the module will not be able to transmit or receive packets. More...

int16_t	packetMode ()
	Disables direct mode and enables packet mode, allowing the module to receive packets. More...

void	setIrqAction (void(*func)(void))
	Sets interrupt service routine to call when IRQ activates. More...

void	clearIrqAction ()
	Clears interrupt service routine to call when IRQ activates.

int16_t	startTransmit (uint8_t *data, size_t len, uint8_t addr=0) override
	Interrupt-driven binary transmit method. Will start transmitting arbitrary binary data up to 64 bytes long. More...

int16_t	startReceive ()
	Interrupt-driven receive method. IRQ will be activated when full valid packet is received. More...

int16_t	readData (uint8_t *data, size_t len) override
	Reads data that was received after calling startReceive method. This method reads len characters. More...

int16_t	setBitRate (float br)
	Sets FSK bit rate. Allowed values range from 0.123 to 256.0 kbps. More...

int16_t	setFrequencyDeviation (float freqDev) override
	Sets FSK frequency deviation from carrier frequency. Allowed values range from 0.625 to 320.0 kHz. More...

int16_t	setRxBandwidth (float rxBw)
	Sets receiver bandwidth. Allowed values range from 2.6 to 620.7 kHz. More...

int16_t	setSyncWord (uint8_t *syncWord, size_t len)
	Sets sync word. Up to 4 bytes can be set as sync word. More...

int16_t	setPreambleLength (uint8_t preambleLen)
	Sets preamble length. More...

size_t	getPacketLength (bool update=true) override
	Query modem for the packet length of received payload. More...

int16_t	setEncoding (uint8_t encoding) override
	Sets transmission encoding. Only available in FSK mode. Allowed values are RADIOLIB_ENCODING_NRZ, RADIOLIB_ENCODING_MANCHESTER and RADIOLIB_ENCODING_WHITENING. More...

int16_t	setDataShaping (uint8_t sh) override
	Sets Gaussian filter bandwidth-time product that will be used for data shaping. Only available in FSK mode with FSK modulation. Allowed values are RADIOLIB_SHAPING_0_3, RADIOLIB_SHAPING_0_5 or RADIOLIB_SHAPING_1_0. Set to RADIOLIB_SHAPING_NONE to disable data shaping. More...

void	setRfSwitchPins (RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn)
	Some modules contain external RF switch controlled by two pins. This function gives RadioLib control over those two pins to automatically switch Rx and Tx state. When using automatic RF switch control, DO NOT change the pin mode of rxEn or txEn from Arduino sketch! More...

uint8_t	random ()
	Get one truly random byte from RSSI noise. More...

Public Member Functions inherited from PhysicalLayer
	PhysicalLayer (float freqStep, size_t maxPacketLength)
	Default constructor. More...

int16_t	transmit (__FlashStringHelper *fstr, uint8_t addr=0)
	Arduino Flash String transmit method. More...

int16_t	transmit (String &str, uint8_t addr=0)
	Arduino String transmit method. More...

int16_t	transmit (const char *str, uint8_t addr=0)
	C-string transmit method. More...

int16_t	receive (String &str, size_t len=0)
	Arduino String receive method. More...

int16_t	startTransmit (String &str, uint8_t addr=0)
	Interrupt-driven Arduino String transmit method. Unlike the standard transmit method, this one is non-blocking. Interrupt pin will be activated when transmission finishes. More...

int16_t	startTransmit (const char *str, uint8_t addr=0)
	Interrupt-driven Arduino String transmit method. Unlike the standard transmit method, this one is non-blocking. Interrupt pin will be activated when transmission finishes. More...

int16_t	readData (String &str, size_t len=0)
	Reads data that was received after calling startReceive method. More...

float	getFreqStep () const
	Gets the module frequency step size that was set in constructor. More...

int32_t	random (int32_t max)
	Get truly random number in range 0 - max. More...

int32_t	random (int32_t min, int32_t max)
	Get truly random number in range min - max. More...

Detailed Description

Base class for Si443x series. All derived classes for Si443x (e.g. Si4431 or Si4432) inherit from this base class. This class should not be instantiated directly from Arduino sketch, only from its derived classes.

Constructor & Destructor Documentation

◆ Si443x()

Si443x::Si443x ( Module * mod )

Default constructor.

Parameters

mod	Instance of Module that will be used to communicate with the radio.

Member Function Documentation

◆ begin()

int16_t Si443x::begin	(	float	br,
		float	freqDev,
		float	rxBw,
		uint8_t	preambleLen
	)

Initialization method.

Parameters

br	Bit rate of the FSK transmission in kbps (kilobits per second).
freqDev	Frequency deviation of the FSK transmission in kHz.
rxBw	Receiver bandwidth in kHz.
preambleLen	Preamble Length in bits.

Returns: Status Codes

◆ getPacketLength()

size_t Si443x::getPacketLength ( bool update = true )

overridevirtual

Query modem for the packet length of received payload.

Parameters

update Update received packet length. Will return cached value when set to false.

Returns: Length of last received packet in bytes.

Todo:: variable length mode

Implements PhysicalLayer.

◆ packetMode()

int16_t Si443x::packetMode ( )

Disables direct mode and enables packet mode, allowing the module to receive packets.

Returns: Status Codes

◆ random()

uint8_t Si443x::random ( )

virtual

Get one truly random byte from RSSI noise.

Returns: TRNG byte.

Implements PhysicalLayer.

◆ readData()

int16_t Si443x::readData	(	uint8_t *	data,
		size_t	len
	)

overridevirtual

Reads data that was received after calling startReceive method. This method reads len characters.

Parameters

data	Pointer to array to save the received binary data.
len	Number of bytes that will be received. Must be known in advance for binary transmissions.

Returns: Status Codes

Implements PhysicalLayer.

◆ receive()

int16_t Si443x::receive	(	uint8_t *	data,
		size_t	len
	)

overridevirtual

Binary receive method. Will attempt to receive arbitrary binary data up to 64 bytes long. For overloads to receive Arduino String, see PhysicalLayer::receive.

Parameters

data	Pointer to array to save the received binary data.
len	Number of bytes that will be received. Must be known in advance for binary transmissions.

Returns: Status Codes

Implements PhysicalLayer.

◆ receiveDirect()

int16_t Si443x::receiveDirect ( )

overridevirtual

Enables direct reception mode. While in direct mode, the module will not be able to transmit or receive packets.

Returns: Status Codes

Implements PhysicalLayer.

◆ setBitRate()

int16_t Si443x::setBitRate ( float br )

Sets FSK bit rate. Allowed values range from 0.123 to 256.0 kbps.

Parameters

br	Bit rate to be set (in kbps).

Returns: Status Codes

◆ setDataShaping()

int16_t Si443x::setDataShaping ( uint8_t sh )

overridevirtual

Sets Gaussian filter bandwidth-time product that will be used for data shaping. Only available in FSK mode with FSK modulation. Allowed values are RADIOLIB_SHAPING_0_3, RADIOLIB_SHAPING_0_5 or RADIOLIB_SHAPING_1_0. Set to RADIOLIB_SHAPING_NONE to disable data shaping.

Parameters

sh	Gaussian shaping bandwidth-time product that will be used for data shaping

Returns: Status Codes

Todo:: implement fiter configuration - docs claim this should be possible, but seems undocumented

Implements PhysicalLayer.

◆ setEncoding()

int16_t Si443x::setEncoding ( uint8_t encoding )

overridevirtual

Sets transmission encoding. Only available in FSK mode. Allowed values are RADIOLIB_ENCODING_NRZ, RADIOLIB_ENCODING_MANCHESTER and RADIOLIB_ENCODING_WHITENING.

Parameters

encoding Encoding to be used.

Returns: Status Codes

Todo:

add inverted Manchester?

Implements PhysicalLayer.

◆ setFrequencyDeviation()

int16_t Si443x::setFrequencyDeviation ( float freqDev )

overridevirtual

Sets FSK frequency deviation from carrier frequency. Allowed values range from 0.625 to 320.0 kHz.

Parameters

freqDev Frequency deviation to be set (in kHz).

Returns: Status Codes

Implements PhysicalLayer.

◆ setIrqAction()

void Si443x::setIrqAction ( void(*)(void) func )

Sets interrupt service routine to call when IRQ activates.

Parameters

func	ISR to call.

◆ setPreambleLength()

int16_t Si443x::setPreambleLength ( uint8_t preambleLen )

Sets preamble length.

Parameters

preambleLen Preamble length to be set (in bits).

Returns: Status Codes

◆ setRfSwitchPins()

void Si443x::setRfSwitchPins	(	RADIOLIB_PIN_TYPE	rxEn,
		RADIOLIB_PIN_TYPE	txEn
	)

Some modules contain external RF switch controlled by two pins. This function gives RadioLib control over those two pins to automatically switch Rx and Tx state. When using automatic RF switch control, DO NOT change the pin mode of rxEn or txEn from Arduino sketch!

Parameters

rxEn	RX enable pin.
txEn	TX enable pin.

◆ setRxBandwidth()

int16_t Si443x::setRxBandwidth ( float rxBw )

Sets receiver bandwidth. Allowed values range from 2.6 to 620.7 kHz.

Parameters

rxBw	Receiver bandwidth to be set in kHz.

Returns: Status Codes

Todo:: float tolerance equality as macro?

◆ setSyncWord()

int16_t Si443x::setSyncWord	(	uint8_t *	syncWord,
		size_t	len
	)

Sets sync word. Up to 4 bytes can be set as sync word.

Parameters

syncWord	Pointer to the array of sync word bytes.
len	Sync word length in bytes.

◆ sleep()

int16_t Si443x::sleep ( )

Sets the module to sleep to save power. Module will not be able to transmit or receive any data while in sleep mode. Module will wake up automatically when methods like transmit or receive are called.

Returns: Status Codes

◆ standby()

int16_t Si443x::standby ( )

overridevirtual

Sets the module to standby.

Returns: Status Codes

Implements PhysicalLayer.

◆ startReceive()

int16_t Si443x::startReceive ( )

Interrupt-driven receive method. IRQ will be activated when full valid packet is received.

Returns: Status Codes

◆ startTransmit()

int16_t Si443x::startTransmit	(	uint8_t *	data,
		size_t	len,
		uint8_t	addr = `0`
	)

overridevirtual

Interrupt-driven binary transmit method. Will start transmitting arbitrary binary data up to 64 bytes long.

Parameters

data	Binary data that will be transmitted.
len	Length of binary data to transmit (in bytes).
addr	Node address to transmit the packet to.

Returns: Status Codes

Todo:: variable packet length

Todo:: use header as address field?

Implements PhysicalLayer.

◆ transmit()

int16_t Si443x::transmit	(	uint8_t *	data,
		size_t	len,
		uint8_t	addr = `0`
	)

overridevirtual

Binary transmit method. Will transmit arbitrary binary data up to 64 bytes long. For overloads to transmit Arduino String or C-string, see PhysicalLayer::transmit.

Parameters

data	Binary data that will be transmitted.
len	Length of binary data to transmit (in bytes).
addr	Node address to transmit the packet to.

Returns: Status Codes

Implements PhysicalLayer.

◆ transmitDirect()

int16_t Si443x::transmitDirect ( uint32_t frf = 0 )

overridevirtual

Enables direct transmission mode. While in direct mode, the module will not be able to transmit or receive packets.

Parameters

FRF	24-bit raw frequency value to start transmitting at. Required for quick frequency shifts in RTTY.

Returns: Status Codes

Todo:: integers only

Implements PhysicalLayer.

The documentation for this class was generated from the following files:

src/modules/Si443x/Si443x.h
src/modules/Si443x/Si443x.cpp

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ Si443x()

Member Function Documentation

◆ begin()

◆ getPacketLength()

◆ packetMode()

◆ random()

◆ readData()

◆ receive()

◆ receiveDirect()

◆ setBitRate()

◆ setDataShaping()

◆ setEncoding()

◆ setFrequencyDeviation()

◆ setIrqAction()

◆ setPreambleLength()

◆ setRfSwitchPins()

◆ setRxBandwidth()

◆ setSyncWord()

◆ sleep()

◆ standby()

◆ startReceive()

◆ startTransmit()

◆ transmit()

◆ transmitDirect()