balena-allwinner/layers/meta-balena-allwinner/recipes-kernel/linux/linux-mainline/armbian/board-pine-h6-pine-h6-0027-arm64-allwinner-h6-add-USB2-related-device-nodes.patch
Vicentiu Galanopulo 7d5f1dbda1 recipes-kernel/linux: Remove unused patches and householding
Some patches were part of other linux-mainline
kernel versions but are not anymore part of the
current 4.19.76.

Move 0001-Enable-uart3-for-NanoPi-Neo-Air-used-by-BT.patch
in linux-mainline_4.19.76.bbappend to avoid error
patching file arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
Hunk #2 FAILED at 162.
1 out of 2 hunks FAILED -- rejects in file arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts

Place all patches from Armbian in a separate directory and do all the Balena specific
operations in linux-mainline_%.bbappend only.

Changelog-entry: Remove unused patches and cleanup
Signed-off-by: Vicentiu Galanopulo <vicentiu@balena.io>
2019-10-14 09:43:01 +02:00

116 lines
3.2 KiB
Diff

From 994865c02ec76b97dbcac43b25eaa2147b84264a Mon Sep 17 00:00:00 2001
From: Icenowy Zheng <icenowy@aosc.io>
Date: Fri, 5 Jan 2018 18:34:15 +0800
Subject: [PATCH 27/35] arm64: allwinner: h6: add USB2-related device nodes
Allwinner H6 has two USB2 ports, one OTG and one host-only.
Add device tree nodes related to them.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 81 ++++++++++++++++++++++++++++
1 file changed, 81 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index b3d8da4..e4ea224 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -233,6 +233,61 @@
status = "disabled";
};
+ usb2otg: usb@5100000 {
+ compatible = "allwinner,sun8i-a33-musb";
+ reg = <0x05100000 0x0400>;
+ clocks = <&ccu CLK_BUS_OTG>;
+ resets = <&ccu RST_BUS_OTG>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ phys = <&usb2phy 0>;
+ phy-names = "usb";
+ extcon = <&usb2phy 0>;
+ status = "disabled";
+ };
+
+ usb2phy: phy@5100400 {
+ compatible = "allwinner,sun50i-h6-usb-phy";
+ reg = <0x05100400 0x14>,
+ <0x05101800 0x4>,
+ <0x05311800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu0",
+ "pmu3";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY3>;
+ clock-names = "usb0_phy",
+ "usb3_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY3>;
+ reset-names = "usb0_reset",
+ "usb3_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci0: usb@5101000 {
+ compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
+ reg = <0x05101000 0x100>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_BUS_EHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_OHCI0>,
+ <&ccu RST_BUS_EHCI0>;
+ status = "disabled";
+ };
+
+ ohci0: usb@5101400 {
+ compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
+ reg = <0x05101400 0x100>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_OHCI0>;
+ status = "disabled";
+ };
+
usb3: usb@5200000 {
compatible = "allwinner,sun50i-h6-dwc3";
#address-cells = <1>;
@@ -271,6 +326,32 @@
status = "disabled";
};
+ ehci3: usb@5311000 {
+ compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
+ reg = <0x05311000 0x100>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI3>,
+ <&ccu CLK_BUS_EHCI3>,
+ <&ccu CLK_USB_OHCI3>;
+ resets = <&ccu RST_BUS_OHCI3>,
+ <&ccu RST_BUS_EHCI3>;
+ phys = <&usb2phy 3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci3: usb@5311400 {
+ compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
+ reg = <0x05311400 0x100>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_OHCI3>,
+ <&ccu CLK_USB_OHCI3>;
+ resets = <&ccu RST_BUS_OHCI3>;
+ phys = <&usb2phy 3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
r_ccu: clock@7010000 {
compatible = "allwinner,sun50i-h6-r-ccu";
reg = <0x07010000 0x400>;
--
2.7.4