7d5f1dbda1
Some patches were part of other linux-mainline kernel versions but are not anymore part of the current 4.19.76. Move 0001-Enable-uart3-for-NanoPi-Neo-Air-used-by-BT.patch in linux-mainline_4.19.76.bbappend to avoid error patching file arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts Hunk #2 FAILED at 162. 1 out of 2 hunks FAILED -- rejects in file arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts Place all patches from Armbian in a separate directory and do all the Balena specific operations in linux-mainline_%.bbappend only. Changelog-entry: Remove unused patches and cleanup Signed-off-by: Vicentiu Galanopulo <vicentiu@balena.io>
143 lines
3.5 KiB
Diff
143 lines
3.5 KiB
Diff
From a1d32a812faa375b9234e215d46383dd3a3ae377 Mon Sep 17 00:00:00 2001
|
|
From: Icenowy Zheng <icenowy@aosc.io>
|
|
Date: Sat, 23 Dec 2017 10:46:45 +0800
|
|
Subject: [PATCH 18/35] arm64: allwinner: h6: enable AXP805 PMIC on Pine H64
|
|
|
|
Pine H64 board has an AXP805 PMIC on it.
|
|
|
|
Enable it in the device tree.
|
|
|
|
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
|
|
---
|
|
.../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 115 +++++++++++++++++++++
|
|
1 file changed, 115 insertions(+)
|
|
|
|
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
|
|
index 3e31f39..9177224 100644
|
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
|
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
|
|
@@ -55,6 +55,121 @@
|
|
status = "okay";
|
|
};
|
|
|
|
+&r_i2c {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&r_i2c_pins>;
|
|
+ status = "okay";
|
|
+
|
|
+ axp805: pmic@36 {
|
|
+ compatible = "x-powers,axp805", "x-powers,axp806";
|
|
+ reg = <0x36>;
|
|
+ interrupt-parent = <&r_intc>;
|
|
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <1>;
|
|
+ x-powers,master-mode;
|
|
+
|
|
+ regulators {
|
|
+ reg_aldo1: aldo1 {
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-name = "vcc-pl";
|
|
+ };
|
|
+
|
|
+ reg_aldo2: aldo2 {
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-name = "vcc-ac200";
|
|
+ };
|
|
+
|
|
+ reg_aldo3: aldo3 {
|
|
+ /* This regulator is connected with CLDO1 */
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-name = "vcc-3v3-1";
|
|
+ };
|
|
+
|
|
+ reg_bldo1: bldo1 {
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-name = "vcc-ddr-bias-pll";
|
|
+ };
|
|
+
|
|
+ reg_bldo2: bldo2 {
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-name = "vcc-efuse-emmc-pcie-hdmi";
|
|
+ };
|
|
+
|
|
+ reg_bldo3: bldo3 {
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-name = "vcc-wifi-io";
|
|
+ };
|
|
+
|
|
+ bldo4 {
|
|
+ /* unused */
|
|
+ };
|
|
+
|
|
+ reg_cldo1: cldo1 {
|
|
+ /* This regulator is connected with ALDO3 */
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-name = "vcc-3v3-2";
|
|
+ };
|
|
+
|
|
+ reg_cldo2: cldo2 {
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-name = "vcc-wifi-1";
|
|
+ };
|
|
+
|
|
+ reg_cldo3: cldo3 {
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-name = "vcc-wifi-2";
|
|
+ };
|
|
+
|
|
+ reg_dcdca: dcdca {
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <810000>;
|
|
+ regulator-max-microvolt = <1080000>;
|
|
+ regulator-name = "vdd-cpu";
|
|
+ };
|
|
+
|
|
+ reg_dcdcc: dcdcc {
|
|
+ regulator-min-microvolt = <810000>;
|
|
+ regulator-max-microvolt = <1080000>;
|
|
+ regulator-name = "vdd-gpu";
|
|
+ };
|
|
+
|
|
+ reg_dcdcd: dcdcd {
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <960000>;
|
|
+ regulator-max-microvolt = <960000>;
|
|
+ regulator-name = "vdd-sys";
|
|
+ };
|
|
+
|
|
+ reg_dcdce: dcdce {
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <1200000>;
|
|
+ regulator-max-microvolt = <1200000>;
|
|
+ regulator-name = "vcc-dram";
|
|
+ };
|
|
+
|
|
+ sw {
|
|
+ /* unused */
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+};
|
|
+
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_ph_pins>;
|
|
--
|
|
2.7.4
|
|
|