7d5f1dbda1
Some patches were part of other linux-mainline kernel versions but are not anymore part of the current 4.19.76. Move 0001-Enable-uart3-for-NanoPi-Neo-Air-used-by-BT.patch in linux-mainline_4.19.76.bbappend to avoid error patching file arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts Hunk #2 FAILED at 162. 1 out of 2 hunks FAILED -- rejects in file arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts Place all patches from Armbian in a separate directory and do all the Balena specific operations in linux-mainline_%.bbappend only. Changelog-entry: Remove unused patches and cleanup Signed-off-by: Vicentiu Galanopulo <vicentiu@balena.io>
88 lines
1.8 KiB
Diff
88 lines
1.8 KiB
Diff
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
|
|
index 26075b9a76e3..a1c2f06ed474 100644
|
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
|
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
|
|
@@ -77,6 +77,17 @@
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
+ reg_usb1_vbus: usb1-vbus {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "usb1-vbus";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ regulator-boot-on;
|
|
+ enable-active-high;
|
|
+ gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
wifi_pwrseq: wifi_pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
|
|
@@ -98,6 +109,14 @@
|
|
};
|
|
};
|
|
|
|
+&ehci0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ehci1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
&emac {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmii_pins>;
|
|
@@ -109,6 +128,14 @@
|
|
};
|
|
};
|
|
|
|
+&ohci0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ohci1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
&r_rsb {
|
|
status = "okay";
|
|
|
|
@@ -117,6 +144,7 @@
|
|
reg = <0x3a3>;
|
|
interrupt-parent = <&r_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
+ x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
|
|
};
|
|
};
|
|
|
|
@@ -201,6 +229,11 @@
|
|
regulator-name = "vcc-wifi-io";
|
|
};
|
|
|
|
+®_drivevbus {
|
|
+ regulator-name = "usb0-vbus";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
®_eldo1 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
@@ -244,3 +277,15 @@
|
|
pinctrl-0 = <&uart0_pins_a>;
|
|
status = "okay";
|
|
};
|
|
+
|
|
+&usb_otg {
|
|
+ dr_mode = "otg";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usbphy {
|
|
+ status = "okay";
|
|
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
|
|
+ usb0_vbus-supply = <®_drivevbus>;
|
|
+ usb1_vbus-supply = <®_usb1_vbus>;
|
|
+};
|