7d5f1dbda1
Some patches were part of other linux-mainline kernel versions but are not anymore part of the current 4.19.76. Move 0001-Enable-uart3-for-NanoPi-Neo-Air-used-by-BT.patch in linux-mainline_4.19.76.bbappend to avoid error patching file arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts Hunk #2 FAILED at 162. 1 out of 2 hunks FAILED -- rejects in file arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts Place all patches from Armbian in a separate directory and do all the Balena specific operations in linux-mainline_%.bbappend only. Changelog-entry: Remove unused patches and cleanup Signed-off-by: Vicentiu Galanopulo <vicentiu@balena.io>
40 lines
1.4 KiB
Diff
40 lines
1.4 KiB
Diff
From 7f24fdacc41a34b5d1a39ae81f4f39660a5b72ca Mon Sep 17 00:00:00 2001
|
|
From: Vasily Khoruzhick <anarsoul@gmail.com>
|
|
Date: Wed, 31 Oct 2018 20:45:16 -0700
|
|
Subject: [PATCH 145/146] arm64: allwinner: a64: enable Bluetooth On Pine64
|
|
|
|
Pine64 has optional RTL8723BS WiFi + BT module, BT is connected to UART1
|
|
and uses PL4 as BT reset, PL5 as device wake GPIO, PL6 as host wake GPIO
|
|
the I2C controlling signals are connected to R_I2C bus.
|
|
|
|
Enable it in the device tree.
|
|
|
|
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
|
|
---
|
|
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 10 +++++++++-
|
|
1 file changed, 9 insertions(+), 1 deletion(-)
|
|
|
|
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
|
|
index f6fc0ed2f4ec..8e55e81c3236 100644
|
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
|
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
|
|
@@ -333,7 +333,15 @@
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
|
|
- status = "disabled";
|
|
+ status = "okay";
|
|
+
|
|
+ bluetooth {
|
|
+ compatible = "realtek,rtl8723bs-bt";
|
|
+ reset-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
|
|
+ device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
|
|
+ host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
|
|
+ firmware-postfix = "pine64";
|
|
+ };
|
|
};
|
|
|
|
/* On Pi-2 connector */
|
|
--
|
|
2.17.1
|
|
|