a6654dc76d
Changelog-entry: Rename meta-resin to meta-balena in repository Signed-off-by: Florin Sarbu <florin@balena.io>
74 lines
No EOL
3.1 KiB
Batchfile
74 lines
No EOL
3.1 KiB
Batchfile
# DO NOT EDIT THIS FILE
|
|
#
|
|
# Please edit /boot/armbianEnv.txt to set supported parameters
|
|
#
|
|
|
|
setenv load_addr "0x44000000"
|
|
setenv overlay_error "false"
|
|
# default values
|
|
setenv verbosity "1"
|
|
setenv console "both"
|
|
setenv disp_mem_reserves "off"
|
|
setenv disp_mode "1920x1080p60"
|
|
setenv rootfstype "ext4"
|
|
setenv docker_optimizations "on"
|
|
|
|
# Print boot source
|
|
itest.b *0x28 == 0x00 && echo "U-boot loaded from SD" && setenv rootdev "/dev/mmcblk0p2"
|
|
itest.b *0x28 == 0x02 && echo "U-boot loaded from eMMC or secondary SD" && setenv rootdev "/dev/mmcblk2p2"
|
|
itest.b *0x28 == 0x03 && echo "U-boot loaded from SPI"
|
|
|
|
echo "Boot script loaded from ${devtype}"
|
|
|
|
if test -e ${devtype} 0 ${prefix}armbianEnv.txt; then
|
|
load ${devtype} 0 ${load_addr} ${prefix}armbianEnv.txt
|
|
env import -t ${load_addr} ${filesize}
|
|
fi
|
|
|
|
if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi
|
|
|
|
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
|
|
if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "${consoleargs} console=ttyS0,115200"; fi
|
|
|
|
# get PARTUUID of first partition on SD/eMMC it was loaded from
|
|
# mmc 0 is always mapped to device u-boot (2016.09+) was loaded from
|
|
if test "${devtype}" = "mmc"; then part uuid mmc 0:1 partuuid; fi
|
|
|
|
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} hdmi.audio=EDID:0 disp.screen0_output_mode=${disp_mode} panic=10 consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} ubootsource=${devtype} ${extraargs} ${extraboardargs}"
|
|
|
|
if test "${disp_mem_reserves}" = "off"; then setenv bootargs "${bootargs} sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16"; fi
|
|
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory swapaccount=1"; fi
|
|
|
|
echo "Found mainline kernel configuration"
|
|
load ${devtype} 0 ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
|
fdt addr ${fdt_addr_r}
|
|
fdt resize 65536
|
|
for overlay_file in ${overlays}; do
|
|
if load ${devtype} 0 ${load_addr} ${prefix}dtb/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
|
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
|
fdt apply ${load_addr} || setenv overlay_error "true"
|
|
fi
|
|
done
|
|
for overlay_file in ${user_overlays}; do
|
|
if load ${devtype} 0 ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
|
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
|
fdt apply ${load_addr} || setenv overlay_error "true"
|
|
fi
|
|
done
|
|
if test "${overlay_error}" = "true"; then
|
|
echo "Error applying DT overlays, restoring original DT"
|
|
load ${devtype} 0 ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
|
else
|
|
if load ${devtype} 0 ${load_addr} ${prefix}dtb/overlay/${overlay_prefix}-fixup.scr; then
|
|
echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
|
|
source ${load_addr}
|
|
fi
|
|
if test -e ${devtype} 0 ${prefix}fixup.scr; then
|
|
load ${devtype} 0 ${load_addr} ${prefix}fixup.scr
|
|
echo "Applying user provided fixup script (fixup.scr)"
|
|
source ${load_addr}
|
|
fi
|
|
fi
|
|
|
|
load ${devtype} 0 ${kernel_addr_r} ${prefix}uImage
|
|
bootm ${kernel_addr_r} - ${fdt_addr_r} |