62 lines
1.7 KiB
C++
62 lines
1.7 KiB
C++
/*
|
|
KiteLib SX127x Channel Activity Detection Example
|
|
|
|
This example scans the current LoRa channel using SX1278 LoRa radio module
|
|
and detects valid LoRa preambles. Preamble is the first part of LoRa transmission,
|
|
so this can be used to check if the LoRa channel is free,
|
|
or if you should start receiving a message.
|
|
|
|
Other modules from SX127x family can also be used.
|
|
SX1272 lora = Kite.ModuleA;
|
|
SX1273 lora = Kite.ModuleA;
|
|
SX1276 lora = Kite.ModuleA;
|
|
SX1277 lora = Kite.ModuleA;
|
|
SX1279 lora = Kite.ModuleA;
|
|
*/
|
|
|
|
// include the library
|
|
#include <KiteLib.h>
|
|
|
|
// SX1278 module is in slot A on the shield
|
|
SX1278 lora = Kite.ModuleA;
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
|
|
// initialize SX1278 with default settings
|
|
Serial.print(F("[SX1278] Initializing ... "));
|
|
// carrier frequency: 434.0 MHz
|
|
// bandwidth: 125.0 kHz
|
|
// spreading factor: 9
|
|
// coding rate: 7
|
|
// sync word: 0x12
|
|
// output power: 17 dBm
|
|
int state = lora.begin();
|
|
if (state == ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while (true);
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
Serial.print(F("Scanning channel for LoRa preamble ... "));
|
|
|
|
// start scanning current channel
|
|
int state = lora.scanChannel();
|
|
|
|
if (state == PREAMBLE_DETECTED) {
|
|
// LoRa preamble was detected
|
|
Serial.println(" detected preamble!");
|
|
|
|
} else if (state == CHANNEL_FREE) {
|
|
// no preamble was detected, channel is free
|
|
Serial.println(" channel is free!");
|
|
|
|
}
|
|
|
|
// wait 100 ms before new scan
|
|
delay(100);
|
|
}
|