95 lines
2.6 KiB
C++
95 lines
2.6 KiB
C++
/*
|
|
* KiteLib SX127x Receive Example
|
|
*
|
|
* This example receives packets using SX1278 LoRa radio module.
|
|
*
|
|
* Other modules from SX127x family can also be used.
|
|
* SX1272 lora = Kite.ModuleA;
|
|
* SX1273 lora = Kite.ModuleA;
|
|
* SX1276 lora = Kite.ModuleA;
|
|
* SX1277 lora = Kite.ModuleA;
|
|
* SX1279 lora = Kite.ModuleA;
|
|
*/
|
|
|
|
// include the library
|
|
#include <KiteLib.h>
|
|
|
|
// SX1278 module is in slot A on the shield
|
|
SX1278 lora = Kite.ModuleA;
|
|
|
|
// create empty instance of Packet class
|
|
Packet pack;
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
|
|
// initialize SX1278 with default settings
|
|
Serial.print(F("[SX1278] Initializing ... "));
|
|
// carrier frequency: 434.0 MHz
|
|
// bandwidth: 125.0 kHz
|
|
// spreading factor: 9
|
|
// coding rate: 7
|
|
// sync word: 0x12
|
|
// output power: 17 dBm
|
|
// node address in EEPROM starts at: 0
|
|
byte state = lora.begin();
|
|
if(state == ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code 0x"));
|
|
Serial.println(state, HEX);
|
|
while(true);
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
Serial.print(F("[SX1278] Waiting for incoming transmission ... "));
|
|
|
|
// wait for single packet
|
|
byte state = lora.receive(pack);
|
|
|
|
if(state == ERR_NONE) {
|
|
// packet was successfully received
|
|
Serial.println(F("success!"));
|
|
|
|
// print the source of the packet
|
|
Serial.print(F("[SX1278] Source:\t\t"));
|
|
Serial.println(pack.getSourceStr());
|
|
|
|
// print the destination of the packet
|
|
Serial.print(F("[SX1278] Destination:\t"));
|
|
Serial.println(pack.getDestinationStr());
|
|
|
|
// print the length of the packet
|
|
Serial.print(F("[SX1278] Length:\t\t"));
|
|
Serial.println(pack.length);
|
|
|
|
// print the data of the packet
|
|
Serial.print(F("[SX1278] Data:\t\t"));
|
|
Serial.println(pack.data);
|
|
|
|
//print the measured data rate
|
|
Serial.print("[SX1278] Datarate:\t");
|
|
Serial.print(lora.dataRate);
|
|
Serial.println(" bps");
|
|
|
|
//print the RSSI (Received Signal Strength Indicator) of the last received packet
|
|
Serial.print("[SX1278] RSSI:\t\t");
|
|
Serial.print(lora.lastPacketRSSI);
|
|
Serial.println(" dBm");
|
|
|
|
//print the SNR (Signal-to-Noise Ratio) of the last received packet
|
|
Serial.print("[SX1278] SNR:\t\t");
|
|
Serial.print(lora.lastPacketSNR);
|
|
Serial.println(" dBm");
|
|
|
|
} else if(state == ERR_RX_TIMEOUT) {
|
|
// timeout occurred while waiting for a packet
|
|
Serial.println(F("timeout!"));
|
|
|
|
} else if(state == ERR_CRC_MISMATCH) {
|
|
// packet was received, but is malformed
|
|
Serial.println(F("CRC error!"));
|
|
|
|
}
|
|
}
|