875da9d89d
* Updated for new initalisation / join sequence * Removed duplicate entry * Pragmatic / conservative disabling on unknown configs with potentially wrong defines - to be investigated at a later date --------- Co-authored-by: Nick McCloud <hiq.bitbucket@armoured.email>
71 lines
2.3 KiB
C++
71 lines
2.3 KiB
C++
/*
|
|
RadioLib LoRaWAN Starter Example
|
|
|
|
This example joins a LoRaWAN network and will send
|
|
uplink packets. Before you start, you will have to
|
|
register your device at https://www.thethingsnetwork.org/
|
|
After your device is registered, you can run this example.
|
|
The device will join the network and start uploading data.
|
|
|
|
Running this examples REQUIRES you to check "Resets DevNonces"
|
|
on your LoRaWAN dashboard. Refer to the network's
|
|
documentation on how to do this.
|
|
|
|
For default module settings, see the wiki page
|
|
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
|
|
|
For full API reference, see the GitHub Pages
|
|
https://jgromes.github.io/RadioLib/
|
|
|
|
For LoRaWAN details, see the wiki page
|
|
https://github.com/jgromes/RadioLib/wiki/LoRaWAN
|
|
|
|
*/
|
|
|
|
#include "config.h"
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
while(!Serial);
|
|
delay(5000); // Give time to switch to the serial monitor
|
|
Serial.println(F("\nSetup ... "));
|
|
|
|
Serial.println(F("Initialise the radio"));
|
|
int16_t state = radio.begin();
|
|
debug(state != RADIOLIB_ERR_NONE, F("Initialise radio failed"), state, true);
|
|
|
|
// Setup the OTAA session information
|
|
node.beginOTAA(joinEUI, devEUI, nwkKey, appKey);
|
|
|
|
Serial.println(F("Join ('login') the LoRaWAN Network"));
|
|
state = node.activateOTAA();
|
|
debug(state != RADIOLIB_LORAWAN_NEW_SESSION, F("Join failed"), state, true);
|
|
|
|
Serial.println(F("Ready!\n"));
|
|
}
|
|
|
|
void loop() {
|
|
Serial.println(F("Sending uplink"));
|
|
|
|
// This is the place to gather the sensor inputs
|
|
// Instead of reading any real sensor, we just generate some random numbers as example
|
|
uint8_t value1 = radio.random(100);
|
|
uint16_t value2 = radio.random(2000);
|
|
|
|
// Build payload byte array
|
|
uint8_t uplinkPayload[3];
|
|
uplinkPayload[0] = value1;
|
|
uplinkPayload[1] = highByte(value2); // See notes for high/lowByte functions
|
|
uplinkPayload[2] = lowByte(value2);
|
|
|
|
// Perform an uplink
|
|
int16_t state = node.sendReceive(uplinkPayload, sizeof(uplinkPayload));
|
|
debug((state != RADIOLIB_LORAWAN_NO_DOWNLINK) && (state != RADIOLIB_ERR_NONE), F("Error in sendReceive"), state, false);
|
|
|
|
Serial.print(F("Uplink complete, next in "));
|
|
Serial.print(uplinkIntervalSeconds);
|
|
Serial.println(F(" seconds"));
|
|
|
|
// Wait until next uplink - observing legal & TTN FUP constraints
|
|
delay(uplinkIntervalSeconds * 1000UL); // delay needs milli-seconds
|
|
}
|