125 lines
3.2 KiB
C++
125 lines
3.2 KiB
C++
/*
|
|
RadioLib AX.25 Transmit AFSK Example
|
|
|
|
This example sends AX.25 messages using
|
|
SX1278's FSK modem. The data is modulated
|
|
as AFSK at 1200 baud using Bell 202 tones.
|
|
|
|
Other modules that can be used for AX.25
|
|
with AFSK modulation:
|
|
- SX127x/RFM9x
|
|
- RF69
|
|
- SX1231
|
|
- CC1101
|
|
- nRF24
|
|
- Si443x/RFM2x
|
|
- SX126x/LLCC68
|
|
|
|
For default module settings, see the wiki page
|
|
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
|
|
|
For full API reference, see the GitHub Pages
|
|
https://jgromes.github.io/RadioLib/
|
|
*/
|
|
|
|
// include the library
|
|
#include <RadioLib.h>
|
|
|
|
// SX1278 has the following connections:
|
|
// NSS pin: 10
|
|
// DIO0 pin: 2
|
|
// RESET pin: 9
|
|
// DIO1 pin: 3
|
|
SX1278 radio = new Module(10, 2, 9, 3);
|
|
|
|
// or detect the pinout automatically using RadioBoards
|
|
// https://github.com/radiolib-org/RadioBoards
|
|
/*
|
|
#define RADIO_BOARD_AUTO
|
|
#include <RadioBoards.h>
|
|
Radio radio = new RadioModule();
|
|
*/
|
|
|
|
// create AFSK client instance using the FSK module
|
|
// this requires connection to the module direct
|
|
// input pin, here connected to Arduino pin 5
|
|
// SX127x/RFM9x: DIO2
|
|
// RF69: DIO2
|
|
// SX1231: DIO2
|
|
// CC1101: GDO2
|
|
// Si443x/RFM2x: GPIO
|
|
// SX126x/LLCC68: DIO2
|
|
AFSKClient audio(&radio, 5);
|
|
|
|
// create AX.25 client instance using the AFSK instance
|
|
AX25Client ax25(&audio);
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
|
|
// initialize SX1278 with default settings
|
|
Serial.print(F("[SX1278] Initializing ... "));
|
|
int state = radio.beginFSK();
|
|
|
|
// when using one of the non-LoRa modules for AX.25
|
|
// (RF69, CC1101,, Si4432 etc.), use the basic begin() method
|
|
// int state = radio.begin();
|
|
|
|
if(state == RADIOLIB_ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while (true) { delay(10); }
|
|
}
|
|
|
|
// initialize AX.25 client
|
|
Serial.print(F("[AX.25] Initializing ... "));
|
|
// source station callsign: "N7LEM"
|
|
// source station SSID: 0
|
|
// preamble length: 8 bytes
|
|
state = ax25.begin("N7LEM");
|
|
if(state == RADIOLIB_ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while (true) { delay(10); }
|
|
}
|
|
|
|
// Sometimes, it may be required to adjust audio
|
|
// frequencies to match the expected 1200/2200 Hz tones.
|
|
// The following method will offset mark frequency by
|
|
// 100 Hz up and space frequency by 100 Hz down
|
|
/*
|
|
Serial.print(F("[AX.25] Setting correction ... "));
|
|
state = ax25.setCorrection(100, -100);
|
|
if(state == RADIOLIB_ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while (true) { delay(10); }
|
|
}
|
|
*/
|
|
}
|
|
|
|
void loop() {
|
|
// send AX.25 unnumbered information frame
|
|
Serial.print(F("[AX.25] Sending UI frame ... "));
|
|
// destination station callsign: "NJ7P"
|
|
// destination station SSID: 0
|
|
int state = ax25.transmit("Hello World!", "NJ7P");
|
|
if (state == RADIOLIB_ERR_NONE) {
|
|
// the packet was successfully transmitted
|
|
Serial.println(F("success!"));
|
|
|
|
} else {
|
|
// some error occurred
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
|
|
}
|
|
|
|
delay(1000);
|
|
}
|