110 lines
3.1 KiB
C++
110 lines
3.1 KiB
C++
/*
|
|
RadioLib LR11x0 GNSS Satellites Example
|
|
|
|
This example performs GNSS scans and shows the satellites
|
|
currently in view. It is mostly useful to verify
|
|
visibility and antenna setup.
|
|
|
|
NOTE: This example will only work for LR11x0 devices
|
|
with sufficiently recent firmware!
|
|
LR1110: 4.1
|
|
LR1120: 2.1
|
|
If your device firmware reports older firmware,
|
|
update it using the LR11x0_Firmware_Update example.
|
|
|
|
For default module settings, see the wiki page
|
|
https://github.com/jgromes/RadioLib/wiki/Default-configuration#lr11x0---wifi-scan
|
|
|
|
For full API reference, see the GitHub Pages
|
|
https://jgromes.github.io/RadioLib/
|
|
*/
|
|
|
|
// include the library
|
|
#include <RadioLib.h>
|
|
|
|
// LR1110 has the following connections:
|
|
// NSS pin: 10
|
|
// DIO1 pin: 2
|
|
// NRST pin: 3
|
|
// BUSY pin: 9
|
|
LR1110 radio = new Module(10, 2, 3, 9);
|
|
|
|
// or detect the pinout automatically using RadioBoards
|
|
// https://github.com/radiolib-org/RadioBoards
|
|
/*
|
|
#define RADIO_BOARD_AUTO
|
|
#include <RadioBoards.h>
|
|
Radio radio = new RadioModule();
|
|
*/
|
|
|
|
// structure to save information about the GNSS scan result
|
|
LR11x0GnssResult_t gnssResult;
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
|
|
// initialize LR1110 with default settings
|
|
Serial.print(F("[LR1110] Initializing ... "));
|
|
int state = radio.beginGNSS(RADIOLIB_LR11X0_GNSS_CONSTELLATION_GPS);
|
|
if (state == RADIOLIB_ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while (true) { delay(10); }
|
|
}
|
|
|
|
// check the firmware version
|
|
Serial.print(F("[LR1110] Checking firmware version ... "));
|
|
state = radio.isGnssScanCapable();
|
|
if (state == RADIOLIB_ERR_NONE) {
|
|
Serial.println(F("check passed!"));
|
|
} else {
|
|
Serial.println(F("check failed, firmware update needed."));
|
|
while (true) { delay(10); }
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
Serial.print(F("[LR1110] Running GNSS scan ... "));
|
|
int state = radio.gnssScan(&gnssResult);
|
|
if(state != RADIOLIB_ERR_NONE) {
|
|
// some error occurred
|
|
Serial.print(F("failed, code "));
|
|
Serial.print(state);
|
|
Serial.print(F(" (demodulator error "));
|
|
Serial.print(RADIOLIB_GET_GNSS_DEMOD_ERROR(state));
|
|
Serial.println(F(")"));
|
|
|
|
} else {
|
|
Serial.println(F("success!"));
|
|
|
|
// print the table header
|
|
Serial.print(F("[LR1110] Detected "));
|
|
Serial.print(gnssResult.numSatsDet);
|
|
Serial.println(F(" satellite(s):"));
|
|
Serial.println(F(" # | ID | C/N0 [dB]\t| Doppler [Hz]"));
|
|
|
|
// read all results at once
|
|
LR11x0GnssSatellite_t satellites[32];
|
|
state = radio.getGnssSatellites(satellites, gnssResult.numSatsDet);
|
|
if(state != RADIOLIB_ERR_NONE) {
|
|
Serial.print(F("Failed to read results, code "));
|
|
Serial.println(state);
|
|
} else {
|
|
// print all the results
|
|
for(int i = 0; i < gnssResult.numSatsDet; i++) {
|
|
if(i < 10) { Serial.print(" "); } Serial.print(i); Serial.print(" | ");
|
|
Serial.print(satellites[i].svId); Serial.print(" | ");
|
|
Serial.print(satellites[i].c_n0); Serial.print("\t\t| ");
|
|
Serial.println(satellites[i].doppler);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
// wait for a second before scanning again
|
|
delay(1000);
|
|
}
|