LR11x0.h

#if !defined(_RADIOLIB_LR11X0_H)
#define _RADIOLIB_LR11X0_H
 
#include "../../TypeDef.h"
 
#if !RADIOLIB_EXCLUDE_LR11X0
 
#include "../../Module.h"
 
#include "../../protocols/PhysicalLayer/PhysicalLayer.h"
 
// LR11X0 physical layer properties
#define RADIOLIB_LR11X0_FREQUENCY_STEP_SIZE                     1.0
#define RADIOLIB_LR11X0_MAX_PACKET_LENGTH                       255
#define RADIOLIB_LR11X0_CRYSTAL_FREQ                            32.0
#define RADIOLIB_LR11X0_DIV_EXPONENT                            25
 
// LR11X0 SPI commands
#define RADIOLIB_LR11X0_CMD_NOP                                 (0x0000)
#define RADIOLIB_LR11X0_CMD_WRITE_REG_MEM                       (0x0105)
#define RADIOLIB_LR11X0_CMD_READ_REG_MEM                        (0x0106)
#define RADIOLIB_LR11X0_CMD_WRITE_BUFFER                        (0x0109)
#define RADIOLIB_LR11X0_CMD_READ_BUFFER                         (0x010A)
#define RADIOLIB_LR11X0_CMD_CLEAR_RX_BUFFER                     (0x010B)
#define RADIOLIB_LR11X0_CMD_WRITE_REG_MEM_MASK                  (0x010C)
#define RADIOLIB_LR11X0_CMD_GET_STATUS                          (0x0100)
#define RADIOLIB_LR11X0_CMD_GET_VERSION                         (0x0101)
#define RADIOLIB_LR11X0_CMD_GET_ERRORS                          (0x010D)
#define RADIOLIB_LR11X0_CMD_CLEAR_ERRORS                        (0x010E)
#define RADIOLIB_LR11X0_CMD_CALIBRATE                           (0x010F)
#define RADIOLIB_LR11X0_CMD_SET_REG_MODE                        (0x0110)
#define RADIOLIB_LR11X0_CMD_CALIB_IMAGE                         (0x0111)
#define RADIOLIB_LR11X0_CMD_SET_DIO_AS_RF_SWITCH                (0x0112)
#define RADIOLIB_LR11X0_CMD_SET_DIO_IRQ_PARAMS                  (0x0113)
#define RADIOLIB_LR11X0_CMD_CLEAR_IRQ                           (0x0114)
#define RADIOLIB_LR11X0_CMD_CONFIG_LF_LOCK                      (0x0116)
#define RADIOLIB_LR11X0_CMD_SET_TCXO_MODE                       (0x0117)
#define RADIOLIB_LR11X0_CMD_REBOOT                              (0x0118)
#define RADIOLIB_LR11X0_CMD_GET_VBAT                            (0x0119)
#define RADIOLIB_LR11X0_CMD_GET_TEMP                            (0x011A)
#define RADIOLIB_LR11X0_CMD_SET_SLEEP                           (0x011B)
#define RADIOLIB_LR11X0_CMD_SET_STANDBY                         (0x011C)
#define RADIOLIB_LR11X0_CMD_SET_FS                              (0x011D)
#define RADIOLIB_LR11X0_CMD_GET_RANDOM_NUMBER                   (0x0120)
#define RADIOLIB_LR11X0_CMD_ERASE_INFO_PAGE                     (0x0121)
#define RADIOLIB_LR11X0_CMD_WRITE_INFO_PAGE                     (0x0122)
#define RADIOLIB_LR11X0_CMD_READ_INFO_PAGE                      (0x0123)
#define RADIOLIB_LR11X0_CMD_GET_CHIP_EUI                        (0x0125)
#define RADIOLIB_LR11X0_CMD_GET_SEMTECH_JOIN_EUI                (0x0126)
#define RADIOLIB_LR11X0_CMD_DERIVE_ROOT_KEYS_AND_GET_PIN        (0x0127)
#define RADIOLIB_LR11X0_CMD_ENABLE_SPI_CRC                      (0x0128)
#define RADIOLIB_LR11X0_CMD_DRIVE_DIOS_IN_SLEEP_MODE            (0x012A)
#define RADIOLIB_LR11X0_CMD_RESET_STATS                         (0x0200)
#define RADIOLIB_LR11X0_CMD_GET_STATS                           (0x0201)
#define RADIOLIB_LR11X0_CMD_GET_PACKET_TYPE                     (0x0202)
#define RADIOLIB_LR11X0_CMD_GET_RX_BUFFER_STATUS                (0x0203)
#define RADIOLIB_LR11X0_CMD_GET_PACKET_STATUS                   (0x0204)
#define RADIOLIB_LR11X0_CMD_GET_RSSI_INST                       (0x0205)
#define RADIOLIB_LR11X0_CMD_SET_GFSK_SYNC_WORD                  (0x0206)
#define RADIOLIB_LR11X0_CMD_SET_LORA_PUBLIC_NETWORK             (0x0208)
#define RADIOLIB_LR11X0_CMD_SET_RX                              (0x0209)
#define RADIOLIB_LR11X0_CMD_SET_TX                              (0x020A)
#define RADIOLIB_LR11X0_CMD_SET_RF_FREQUENCY                    (0x020B)
#define RADIOLIB_LR11X0_CMD_AUTO_TX_RX                          (0x020C)
#define RADIOLIB_LR11X0_CMD_SET_CAD_PARAMS                      (0x020D)
#define RADIOLIB_LR11X0_CMD_SET_PACKET_TYPE                     (0x020E)
#define RADIOLIB_LR11X0_CMD_SET_MODULATION_PARAMS               (0x020F)
#define RADIOLIB_LR11X0_CMD_SET_PACKET_PARAMS                   (0x0210)
#define RADIOLIB_LR11X0_CMD_SET_TX_PARAMS                       (0x0211)
#define RADIOLIB_LR11X0_CMD_SET_PACKET_ADRS                     (0x0212)
#define RADIOLIB_LR11X0_CMD_SET_RX_TX_FALLBACK_MODE             (0x0213)
#define RADIOLIB_LR11X0_CMD_SET_RX_DUTY_CYCLE                   (0x0214)
#define RADIOLIB_LR11X0_CMD_SET_PA_CONFIG                       (0x0215)
#define RADIOLIB_LR11X0_CMD_STOP_TIMEOUT_ON_PREAMBLE            (0x0217)
#define RADIOLIB_LR11X0_CMD_SET_CAD                             (0x0218)
#define RADIOLIB_LR11X0_CMD_SET_TX_CW                           (0x0219)
#define RADIOLIB_LR11X0_CMD_SET_TX_INFINITE_PREAMBLE            (0x021A)
#define RADIOLIB_LR11X0_CMD_SET_LORA_SYNCH_TIMEOUT              (0x021B)
#define RADIOLIB_LR11X0_CMD_SET_RANGING_ADDR                    (0x021C)
#define RADIOLIB_LR11X0_CMD_SET_RANGING_REQ_ADDR                (0x021D)
#define RADIOLIB_LR11X0_CMD_GET_RANGING_RESULT                  (0x021E)
#define RADIOLIB_LR11X0_CMD_SET_RANGING_TX_RX_DELAY             (0x021F)
#define RADIOLIB_LR11X0_CMD_SET_GFSK_CRC_PARAMS                 (0x0224)
#define RADIOLIB_LR11X0_CMD_SET_GFSK_WHIT_PARAMS                (0x0225)
#define RADIOLIB_LR11X0_CMD_SET_RX_BOOSTED                      (0x0227)
#define RADIOLIB_LR11X0_CMD_SET_RANGING_PARAMETER               (0x0228)
#define RADIOLIB_LR11X0_CMD_SET_RSSI_CALIBRATION                (0x0229)
#define RADIOLIB_LR11X0_CMD_SET_LORA_SYNC_WORD                  (0x022B)
#define RADIOLIB_LR11X0_CMD_LR_FHSS_BUILD_FRAME                 (0x022C)
#define RADIOLIB_LR11X0_CMD_LR_FHSS_SET_SYNC_WORD               (0x022D)
#define RADIOLIB_LR11X0_CMD_CONFIG_BLE_BEACON                   (0x022E)
#define RADIOLIB_LR11X0_CMD_GET_LORA_RX_HEADER_INFOS            (0x0230)
#define RADIOLIB_LR11X0_CMD_BLE_BEACON_SEND                     (0x0231)
#define RADIOLIB_LR11X0_CMD_WIFI_SCAN                           (0x0300)
#define RADIOLIB_LR11X0_CMD_WIFI_SCAN_TIME_LIMIT                (0x0301)
#define RADIOLIB_LR11X0_CMD_WIFI_COUNTRY_CODE                   (0x0302)
#define RADIOLIB_LR11X0_CMD_WIFI_COUNTRY_CODE_TIME_LIMIT        (0x0303)
#define RADIOLIB_LR11X0_CMD_WIFI_GET_NB_RESULTS                 (0x0305)
#define RADIOLIB_LR11X0_CMD_WIFI_READ_RESULTS                   (0x0306)
#define RADIOLIB_LR11X0_CMD_WIFI_RESET_CUMUL_TIMINGS            (0x0307)
#define RADIOLIB_LR11X0_CMD_WIFI_READ_CUMUL_TIMINGS             (0x0308)
#define RADIOLIB_LR11X0_CMD_WIFI_GET_NB_COUNTRY_CODE_RESULTS    (0x0309)
#define RADIOLIB_LR11X0_CMD_WIFI_READ_COUNTRY_CODE_RESULTS      (0x030A)
#define RADIOLIB_LR11X0_CMD_WIFI_CFG_TIMESTAMP_AP_PHONE         (0x030B)
#define RADIOLIB_LR11X0_CMD_WIFI_READ_VERSION                   (0x0320)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_RSSI                      (0x0222)
#define RADIOLIB_LR11X0_CMD_GNSS_SET_CONSTELLATION_TO_USE       (0x0400)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_CONSTELLATION_TO_USE      (0x0401)
#define RADIOLIB_LR11X0_CMD_GNSS_SET_ALMANAC_UPDATE             (0x0402)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_ALMANAC_UPDATE            (0x0403)
#define RADIOLIB_LR11X0_CMD_GNSS_SET_FREQ_SEARCH_SPACE          (0x0404)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_FREQ_SEARCH_SPACE         (0x0405)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_VERSION                   (0x0406)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_SUPPORTED_CONSTELLATIONS  (0x0407)
#define RADIOLIB_LR11X0_CMD_GNSS_SET_MODE                       (0x0408)
#define RADIOLIB_LR11X0_CMD_GNSS_AUTONOMOUS                     (0x0409)
#define RADIOLIB_LR11X0_CMD_GNSS_ASSISTED                       (0x040A)
#define RADIOLIB_LR11X0_CMD_GNSS_SCAN                           (0x040B)
#define RADIOLIB_LR11X0_CMD_GNSS_GET_RESULT_SIZE                (0x040C)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_RESULTS                   (0x040D)
#define RADIOLIB_LR11X0_CMD_GNSS_ALMANAC_FULL_UPDATE            (0x040E)
#define RADIOLIB_LR11X0_CMD_GNSS_ALMANAC_READ_ADDR_SIZE         (0x040F)
#define RADIOLIB_LR11X0_CMD_GNSS_SET_ASSISTANCE_POSITION        (0x0410)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_ASSISTANCE_POSITION       (0x0411)
#define RADIOLIB_LR11X0_CMD_GNSS_PUSH_SOLVER_MSG                (0x0414)
#define RADIOLIB_LR11X0_CMD_GNSS_PUSH_DM_MSG                    (0x0415)
#define RADIOLIB_LR11X0_CMD_GNSS_GET_CONTEXT_STATUS             (0x0416)
#define RADIOLIB_LR11X0_CMD_GNSS_GET_NB_SV_DETECTED             (0x0417)
#define RADIOLIB_LR11X0_CMD_GNSS_GET_SV_DETECTED                (0x0418)
#define RADIOLIB_LR11X0_CMD_GNSS_GET_CONSUMPTION                (0x0419)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_ALMANAC_PER_SATELLITE     (0x041A)
#define RADIOLIB_LR11X0_CMD_GNSS_GET_SV_VISIBLE                 (0x041F)
#define RADIOLIB_LR11X0_CMD_GNSS_GET_SV_VISIBLE_DOPPLER         (0x0420)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_LAST_SCAN_MODE_LAUNCHED   (0x0426)
#define RADIOLIB_LR11X0_CMD_GNSS_FETCH_TIME                     (0x0432)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_TIME                      (0x0434)
#define RADIOLIB_LR11X0_CMD_GNSS_RESET_TIME                     (0x0435)
#define RADIOLIB_LR11X0_CMD_GNSS_RESET_POSITION                 (0x0437)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_WEEK_NUMBER_ROLLOWER      (0x0438)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_DEMOD_STATUS              (0x0439)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_CUMUL_TIMING              (0x044A)
#define RADIOLIB_LR11X0_CMD_GNSS_SET_TIME                       (0x044B)
#define RADIOLIB_LR11X0_CMD_GNSS_CONFIG_DELAY_RESET_AP          (0x044D)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_DOPPLER_SOLVER_RES        (0x044F)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_DELAY_RESET_AP            (0x0453)
#define RADIOLIB_LR11X0_CMD_GNSS_ALMANAC_UPDATE_FROM_SAT        (0x0454)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_KEEP_SYNC_STATUS          (0x0456)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_ALMANAC_STATUS            (0x0457)
#define RADIOLIB_LR11X0_CMD_GNSS_CONFIG_ALMANAC_UPDATE_PERIOD   (0x0463)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_ALMANAC_UPDATE_PERIOD     (0x0464)
#define RADIOLIB_LR11X0_CMD_GNSS_GET_SV_WARM_START              (0x0466)
#define RADIOLIB_LR11X0_CMD_GNSS_GET_SV_SYNC                    (0x0466)
#define RADIOLIB_LR11X0_CMD_GNSS_READ_WARM_START_STATUS         (0x0469)
#define RADIOLIB_LR11X0_CMD_GNSS_WRITE_BIT_MASK_SAT_ACTIVATED   (0x0472)
#define RADIOLIB_LR11X0_CMD_CRYPTO_SET_KEY                      (0x0502)
#define RADIOLIB_LR11X0_CMD_CRYPTO_DERIVE_KEY                   (0x0503)
#define RADIOLIB_LR11X0_CMD_CRYPTO_PROCESS_JOIN_ACCEPT          (0x0504)
#define RADIOLIB_LR11X0_CMD_CRYPTO_COMPUTE_AES_CMAC             (0x0505)
#define RADIOLIB_LR11X0_CMD_CRYPTO_VERIFY_AES_CMAC              (0x0506)
#define RADIOLIB_LR11X0_CMD_CRYPTO_AES_ENCRYPT_01               (0x0507)
#define RADIOLIB_LR11X0_CMD_CRYPTO_AES_ENCRYPT                  (0x0508)
#define RADIOLIB_LR11X0_CMD_CRYPTO_AES_DECRYPT                  (0x0509)
#define RADIOLIB_LR11X0_CMD_CRYPTO_STORE_TO_FLASH               (0x050A)
#define RADIOLIB_LR11X0_CMD_CRYPTO_RESTORE_FROM_FLASH           (0x050B)
#define RADIOLIB_LR11X0_CMD_CRYPTO_SET_PARAM                    (0x050D)
#define RADIOLIB_LR11X0_CMD_CRYPTO_GET_PARAM                    (0x050E)
#define RADIOLIB_LR11X0_CMD_CRYPTO_CHECK_ENCRYPTED_FIRMWARE_IMAGE         (0x050F)
#define RADIOLIB_LR11X0_CMD_CRYPTO_CHECK_ENCRYPTED_FIRMWARE_IMAGE_RESULT  (0x0510)
#define RADIOLIB_LR11X0_CMD_BOOT_ERASE_FLASH                    (0x8000)
#define RADIOLIB_LR11X0_CMD_BOOT_WRITE_FLASH_ENCRYPTED          (0x8003)
#define RADIOLIB_LR11X0_CMD_BOOT_REBOOT                         (0x8005)
#define RADIOLIB_LR11X0_CMD_BOOT_GET_PIN                        (0x800B)
#define RADIOLIB_LR11X0_CMD_BOOT_GET_CHIP_EUI                   (0x800C)
#define RADIOLIB_LR11X0_CMD_BOOT_GET_JOIN_EUI                   (0x800D)
 
// LR11X0 register map
#define RADIOLIB_LR11X0_REG_SF6_SX127X_COMPAT                   (0x00F20414)
#define RADIOLIB_LR11X0_REG_LORA_HIGH_POWER_FIX                 (0x00F30054)
#define RADIOLIB_LR11X0_REG_LNA_MODE                            (0x00F3008C)
// TODO add fix for br 600/1200 bps
 
// LR11X0 SPI command variables
 
// RADIOLIB_LR11X0_CMD_GET_STATUS                                                   MSB   LSB   DESCRIPTION
#define RADIOLIB_LR11X0_STAT_1_CMD_FAIL                         (0x00UL << 1)   //  3     1     command status: last command could not be executed
#define RADIOLIB_LR11X0_STAT_1_CMD_PERR                         (0x01UL << 1)   //  3     1                     processing error
#define RADIOLIB_LR11X0_STAT_1_CMD_OK                           (0x02UL << 1)   //  3     1                     successfully processed
#define RADIOLIB_LR11X0_STAT_1_CMD_DAT                          (0x03UL << 1)   //  3     1                     successfully processed, data is being transmitted
#define RADIOLIB_LR11X0_STAT_1_IRQ_INACTIVE                     (0x00UL << 0)   //  0     0     interrupt status: inactive
#define RADIOLIB_LR11X0_STAT_1_IRQ_ACTIVE                       (0x01UL << 0)   //  0     0                       at least 1 interrupt active
#define RADIOLIB_LR11X0_STAT_2_CMD_RST_CLEARED                  (0x00UL << 4)   //  7     4     reset status: cleared
#define RADIOLIB_LR11X0_STAT_2_CMD_RST_ANALOG                   (0x01UL << 4)   //  7     4                   analog (power on, brown-out)
#define RADIOLIB_LR11X0_STAT_2_CMD_RST_EXTERNAL                 (0x02UL << 4)   //  7     4                   NRESET pin
#define RADIOLIB_LR11X0_STAT_2_CMD_RST_SYSTEM                   (0x03UL << 4)   //  7     4                   system
#define RADIOLIB_LR11X0_STAT_2_CMD_RST_WATCHDOG                 (0x04UL << 4)   //  7     4                   watchdog
#define RADIOLIB_LR11X0_STAT_2_CMD_RST_WAKEUP                   (0x05UL << 4)   //  7     4                   NSS toggling wake-up
#define RADIOLIB_LR11X0_STAT_2_CMD_RST_RTC                      (0x06UL << 4)   //  7     4                   realtime clock
#define RADIOLIB_LR11X0_STAT_2_MODE_SLEEP                       (0x00UL << 1)   //  3     1     chip mode: sleep
#define RADIOLIB_LR11X0_STAT_2_MODE_STBY_RC                     (0x01UL << 1)   //  3     1                standby with RC oscillator
#define RADIOLIB_LR11X0_STAT_2_MODE_STBY_OSC                    (0x02UL << 1)   //  3     1                standby with external oscillator
#define RADIOLIB_LR11X0_STAT_2_MODE_FS                          (0x03UL << 1)   //  3     1                frequency synthesis
#define RADIOLIB_LR11X0_STAT_2_MODE_RX                          (0x04UL << 1)   //  3     1                receive
#define RADIOLIB_LR11X0_STAT_2_MODE_TX                          (0x05UL << 1)   //  3     1                transmit
#define RADIOLIB_LR11X0_STAT_2_MODE_WIFI_GNSS                   (0x06UL << 1)   //  3     1                WiFi or GNSS geolocation
#define RADIOLIB_LR11X0_STAT_2_BOOT                             (0x00UL << 0)   //  0     0     code executed from: bootloader
#define RADIOLIB_LR11X0_STAT_2_FLASH                            (0x01UL << 0)   //  0     0                         flash
 
// RADIOLIB_LR11X0_CMD_WRITE_REG_MEM
#define RADIOLIB_LR11X0_SPI_MAX_READ_WRITE_LEN                  (256)           //  7     0     maximum length of read/write SPI payload in bytes
 
// RADIOLIB_LR11X0_CMD_GET_VERSION
#define RADIOLIB_LR11X0_DEVICE_LR1110                           (0x01UL << 0)   //  7     0     HW device: LR1110
#define RADIOLIB_LR11X0_DEVICE_LR1120                           (0x02UL << 0)   //  7     0                LR1120
#define RADIOLIB_LR11X0_DEVICE_LR1121                           (0x03UL << 0)   //  7     0                LR1121
#define RADIOLIB_LR11X0_DEVICE_BOOT                             (0xDFUL << 0)   //  7     0                bootloader mode
 
// RADIOLIB_LR11X0_CMD_GET_ERRORS
#define RADIOLIB_LR11X0_ERROR_STAT_LF_RC_CALIB_ERR              (0x01UL << 0)   //  15    0     error: low frequency RC not calibrated
#define RADIOLIB_LR11X0_ERROR_STAT_HF_RC_CALIB_ERR              (0x01UL << 1)   //  15    0            high frequency RC not calibrated
#define RADIOLIB_LR11X0_ERROR_STAT_ADC_CALIB_ERR                (0x01UL << 2)   //  15    0            ADC not calibrated
#define RADIOLIB_LR11X0_ERROR_STAT_PLL_CALIB_ERR                (0x01UL << 3)   //  15    0            PLL not calibrated
#define RADIOLIB_LR11X0_ERROR_STAT_IMG_CALIB_ERR                (0x01UL << 4)   //  15    0            image rejection not calibrated
#define RADIOLIB_LR11X0_ERROR_STAT_HF_XOSC_START_ERR            (0x01UL << 5)   //  15    0            high frequency oscillator failed to start
#define RADIOLIB_LR11X0_ERROR_STAT_LF_XOSC_START_ERR            (0x01UL << 6)   //  15    0            low frequency oscillator failed to start
#define RADIOLIB_LR11X0_ERROR_STAT_PLL_LOCK_ERR                 (0x01UL << 7)   //  15    0            PLL failed to lock
#define RADIOLIB_LR11X0_ERROR_STAT_RX_ADC_OFFSET_ERR            (0x01UL << 8)   //  15    0            ADC offset not calibrated
 
// RADIOLIB_LR11X0_CMD_CALIBRATE
#define RADIOLIB_LR11X0_CALIBRATE_PLL_TX                        (0x01UL << 5)   //  5     5     calibrate: Tx PLL
#define RADIOLIB_LR11X0_CALIBRATE_IMG                           (0x01UL << 4)   //  4     4                image rejection
#define RADIOLIB_LR11X0_CALIBRATE_ADC                           (0x01UL << 3)   //  3     3                A/D converter
#define RADIOLIB_LR11X0_CALIBRATE_PLL                           (0x01UL << 2)   //  2     2                PLL
#define RADIOLIB_LR11X0_CALIBRATE_HF_RC                         (0x01UL << 1)   //  1     1                high frequency RC
#define RADIOLIB_LR11X0_CALIBRATE_LF_RC                         (0x01UL << 0)   //  0     0                low frequency RC
#define RADIOLIB_LR11X0_CALIBRATE_ALL                           (0x3FUL << 0)   //  5     0                everything
 
// RADIOLIB_LR11X0_CMD_SET_REG_MODE
#define RADIOLIB_LR11X0_REG_MODE_LDO                            (0x00UL << 0)   //  0     0     regulator mode: LDO in all modes
#define RADIOLIB_LR11X0_REG_MODE_DC_DC                          (0x01UL << 0)   //  0     0                     DC-DC and LDO
 
// RADIOLIB_LR11X0_CMD_SET_DIO_AS_RF_SWITCH
#define RADIOLIB_LR11X0_RFSW_DIO5_ENABLED                       (0x01UL << 0)   //  4     0     RF switch: DIO5 enabled
#define RADIOLIB_LR11X0_RFSW_DIO5_DISABLED                      (0x00UL << 0)   //  4     0                DIO5 disabled (default)
#define RADIOLIB_LR11X0_RFSW_DIO6_ENABLED                       (0x01UL << 1)   //  4     0     RF switch: DIO6 enabled
#define RADIOLIB_LR11X0_RFSW_DIO6_DISABLED                      (0x00UL << 1)   //  4     0                DIO6 disabled (default)
#define RADIOLIB_LR11X0_RFSW_DIO7_ENABLED                       (0x01UL << 2)   //  4     0     RF switch: DIO7 enabled
#define RADIOLIB_LR11X0_RFSW_DIO7_DISABLED                      (0x00UL << 2)   //  4     0                DIO7 disabled (default)
#define RADIOLIB_LR11X0_RFSW_DIO8_ENABLED                       (0x01UL << 3)   //  4     0     RF switch: DIO8 enabled
#define RADIOLIB_LR11X0_RFSW_DIO8_DISABLED                      (0x00UL << 3)   //  4     0                DIO8 disabled (default)
#define RADIOLIB_LR11X0_RFSW_DIO10_ENABLED                      (0x01UL << 4)   //  4     0     RF switch: DIO10 enabled
#define RADIOLIB_LR11X0_RFSW_DIO10_DISABLED                     (0x00UL << 4)   //  4     0                DIO10 disabled (default)
#define RADIOLIB_LR11X0_DIO5                                    (0)
#define RADIOLIB_LR11X0_DIO6                                    (1)
#define RADIOLIB_LR11X0_DIO7                                    (2)
#define RADIOLIB_LR11X0_DIO8                                    (3)
#define RADIOLIB_LR11X0_DIO10                                   (4)
 
// RADIOLIB_LR11X0_CMD_SET_DIO_IRQ_PARAMS
#define RADIOLIB_LR11X0_IRQ_TX_DONE                             (0x01UL << 2)   //  31    0     interrupt: packet transmitted
#define RADIOLIB_LR11X0_IRQ_RX_DONE                             (0x01UL << 3)   //  31    0                packet received
#define RADIOLIB_LR11X0_IRQ_PREAMBLE_DETECTED                   (0x01UL << 4)   //  31    0                preamble detected
#define RADIOLIB_LR11X0_IRQ_SYNC_WORD_HEADER_VALID              (0x01UL << 5)   //  31    0                sync word or LoRa header valid
#define RADIOLIB_LR11X0_IRQ_HEADER_ERR                          (0x01UL << 6)   //  31    0                LoRa header CRC error
#define RADIOLIB_LR11X0_IRQ_CRC_ERR                             (0x01UL << 7)   //  31    0                packet CRC error 
#define RADIOLIB_LR11X0_IRQ_CAD_DONE                            (0x01UL << 8)   //  31    0                CAD completed
#define RADIOLIB_LR11X0_IRQ_CAD_DETECTED                        (0x01UL << 9)   //  31    0                CAD detected
#define RADIOLIB_LR11X0_IRQ_TIMEOUT                             (0x01UL << 10)  //  31    0                Rx or Tx timeout
#define RADIOLIB_LR11X0_IRQ_LR_FHSS_HOP                         (0x01UL << 11)  //  31    0                FHSS hop
#define RADIOLIB_LR11X0_IRQ_GNSS_DONE                           (0x01UL << 19)  //  31    0                GNSS scan finished
#define RADIOLIB_LR11X0_IRQ_WIFI_DONE                           (0x01UL << 20)  //  31    0                WiFi scan finished
#define RADIOLIB_LR11X0_IRQ_LBD                                 (0x01UL << 21)  //  31    0                low battery detected
#define RADIOLIB_LR11X0_IRQ_CMD_ERROR                           (0x01UL << 22)  //  31    0                command error
#define RADIOLIB_LR11X0_IRQ_ERROR                               (0x01UL << 23)  //  31    0                some other error than CMD_ERR
#define RADIOLIB_LR11X0_IRQ_FSK_LEN_ERROR                       (0x01UL << 24)  //  31    0                FSK packet received with length error
#define RADIOLIB_LR11X0_IRQ_FSK_ADDR_ERROR                      (0x01UL << 25)  //  31    0                FSK packet received with address error
#define RADIOLIB_LR11X0_IRQ_LORA_RX_TIMESTAMP                   (0x01UL << 27)  //  31    0                last LoRa symbol was received (timestamp source)
#define RADIOLIB_LR11X0_IRQ_ALL                                 (0x0BF80FFCUL)  //  31    0                all interrupts
#define RADIOLIB_LR11X0_IRQ_NONE                                (0x00UL << 0)   //  31    0                no interrupts
 
// RADIOLIB_LR11X0_CMD_CONFIG_LF_LOCK
#define RADIOLIB_LR11X0_LF_CLK_RC                               (0x00UL << 0)   //  1     0     32.768 kHz source: RC oscillator
#define RADIOLIB_LR11X0_LF_CLK_XOSC                             (0x01UL << 0)   //  1     0                        crystal oscillator
#define RADIOLIB_LR11X0_LF_CLK_EXT                              (0x02UL << 0)   //  1     0                        external signal on DIO11
#define RADIOLIB_LR11X0_LF_BUSY_RELEASE_DISABLED                (0x00UL << 2)   //  2     2
#define RADIOLIB_LR11X0_LF_BUSY_RELEASE_ENABLED                 (0x01UL << 2)   //  2     2
 
// RADIOLIB_LR11X0_CMD_SET_TCXO_MODE
#define RADIOLIB_LR11X0_TCXO_VOLTAGE_1_6                        (0x00UL << 0)   //  2     0     TCXO supply voltage: 1.6V
#define RADIOLIB_LR11X0_TCXO_VOLTAGE_1_7                        (0x01UL << 0)   //  2     0                          1.7V
#define RADIOLIB_LR11X0_TCXO_VOLTAGE_1_8                        (0x02UL << 0)   //  2     0                          1.8V
#define RADIOLIB_LR11X0_TCXO_VOLTAGE_2_2                        (0x03UL << 0)   //  2     0                          2.2V
#define RADIOLIB_LR11X0_TCXO_VOLTAGE_2_4                        (0x04UL << 0)   //  2     0                          2.4V
#define RADIOLIB_LR11X0_TCXO_VOLTAGE_2_7                        (0x05UL << 0)   //  2     0                          2.7V
#define RADIOLIB_LR11X0_TCXO_VOLTAGE_3_0                        (0x06UL << 0)   //  2     0                          3.0V
#define RADIOLIB_LR11X0_TCXO_VOLTAGE_3_3                        (0x07UL << 0)   //  2     0                          3.3V
 
// RADIOLIB_LR11X0_CMD_SET_SLEEP
#define RADIOLIB_LR11X0_SLEEP_RETENTION_DISABLED                (0x00UL << 0)   //  0     0     configuration retention in sleep mode: disabled
#define RADIOLIB_LR11X0_SLEEP_RETENTION_ENABLED                 (0x01UL << 0)   //  0     0                                            enabled
#define RADIOLIB_LR11X0_SLEEP_WAKEUP_DISABLED                   (0x00UL << 0)   //  1     1     automated wakeup: disabled
#define RADIOLIB_LR11X0_SLEEP_WAKEUP_ENABLED                    (0x01UL << 0)   //  1     1                       enabled
 
// RADIOLIB_LR11X0_CMD_SET_STANDBY
#define RADIOLIB_LR11X0_STANDBY_RC                              (0x00UL << 0)   //  7     0     standby mode: RC oscillator
#define RADIOLIB_LR11X0_STANDBY_XOSC                            (0x00UL << 0)   //  7     0                   XTAL/TCXO oscillator
 
// RADIOLIB_LR11X0_CMD_ERASE_INFO_PAGE
#define RADIOLIB_LR11X0_INFO_PAGE                               (1)
 
// RADIOLIB_LR11X0_CMD_GET_CHIP_EUI
#define RADIOLIB_LR11X0_EUI_LEN                                 (8)
 
// RADIOLIB_LR11X0_CMD_DERIVE_ROOT_KEYS_AND_GET_PIN
#define RADIOLIB_LR11X0_PIN_LEN                                 (4)
 
// RADIOLIB_LR11X0_CMD_GET_PACKET_STATUS
#define RADIOLIB_LR11X0_RX_STATUS_ADDR_ERR                      (0x01UL << 5)   //  7     0     Rx status: address filtering error
#define RADIOLIB_LR11X0_RX_STATUS_CRC_ERR                       (0x01UL << 4)   //  7     0                CRC error
#define RADIOLIB_LR11X0_RX_STATUS_LEN_ERR                       (0x01UL << 3)   //  7     0                length filtering error
#define RADIOLIB_LR11X0_RX_STATUS_ABORTED                       (0x01UL << 2)   //  7     0                packet reception aborted
#define RADIOLIB_LR11X0_RX_STATUS_PACKET_RECEIVED               (0x01UL << 1)   //  7     0                packet received
#define RADIOLIB_LR11X0_RX_STATUS_PACKET_SENT                   (0x01UL << 0)   //  7     0                packet sent
 
// RADIOLIB_LR11X0_CMD_SET_GFSK_SYNC_WORD
#define RADIOLIB_LR11X0_GFSK_SYNC_WORD_LEN                      (8)
 
// RADIOLIB_LR11X0_CMD_SET_LORA_PUBLIC_NETWORK
#define RADIOLIB_LR11X0_LORA_PRIVATE_NETWORK                    (0x00UL << 0)   //  7     0     LoRa sync word: private network
#define RADIOLIB_LR11X0_LORA_PUBLIC_NETWORK                     (0x01UL << 0)   //  7     0                     public network
 
// RADIOLIB_LR11X0_CMD_SET_RX
#define RADIOLIB_LR11X0_RX_TIMEOUT_NONE                         (0x000000UL)    //  23    0     Rx timeout duration: no timeout (Rx single mode)
#define RADIOLIB_LR11X0_RX_TIMEOUT_INF                          (0xFFFFFFUL)    //  23    0                          infinite (Rx continuous mode)
 
// RADIOLIB_LR11X0_CMD_SET_TX
#define RADIOLIB_LR11X0_TX_TIMEOUT_NONE                         (0x000000UL)    //  23    0     disable Tx timeout
 
// RADIOLIB_LR11X0_CMD_AUTO_TX_RX
#define RADIOLIB_LR11X0_AUTO_TX_RX_DISABLED                     (0xFFFFFFUL)    //  23    0     disable auto Tx/Rx mode
#define RADIOLIB_LR11X0_AUTO_TX_RX_SKIP_INT                     (0x000000UL)    //  23    0     skip intermediary mode
#define RADIOLIB_LR11X0_AUTO_INTERMEDIARY_MODE_SLEEP            (0x00UL << 0)   //  1     0     intermediary mode: sleep
#define RADIOLIB_LR11X0_AUTO_INTERMEDIARY_MODE_STBY_RC          (0x01UL << 0)   //  1     0                        standby with RC
#define RADIOLIB_LR11X0_AUTO_INTERMEDIARY_MODE_STBY_XOSC        (0x02UL << 0)   //  1     0                        standby with XOSC
#define RADIOLIB_LR11X0_AUTO_INTERMEDIARY_MODE_FS               (0x03UL << 0)   //  1     0                        frequency synthesis
#define RADIOLIB_LR11X0_AUTO_TX_RX_TIMEOUT_DISABLED             (0x000000UL)    //  23    0     disable timeout of the second mode
 
// RADIOLIB_LR11X0_CMD_SET_CAD_PARAMS
#define RADIOLIB_LR11X0_CAD_EXIT_MODE_STBY_RC                   (0x00UL << 0)   //  7     0     mode to set after CAD: standby with RC
#define RADIOLIB_LR11X0_CAD_EXIT_MODE_RX                        (0x01UL << 0)   //  7     0                            receive if activity detected
#define RADIOLIB_LR11X0_CAD_EXIT_MODE_LBT                       (0x10UL << 0)   //  7     0                            transmit if no activity detected
#define RADIOLIB_LR11X0_CAD_PARAM_DEFAULT                       (0xFFUL << 0)   //  7     0     used by the CAD methods to specify default parameter value
 
// RADIOLIB_LR11X0_CMD_SET_PACKET_TYPE
#define RADIOLIB_LR11X0_PACKET_TYPE_NONE                        (0x00UL << 0)   //  2     0     packet type: none
#define RADIOLIB_LR11X0_PACKET_TYPE_GFSK                        (0x01UL << 0)   //  2     0                  (G)FSK
#define RADIOLIB_LR11X0_PACKET_TYPE_LORA                        (0x02UL << 0)   //  2     0                  LoRa
#define RADIOLIB_LR11X0_PACKET_TYPE_SIGFOX                      (0x03UL << 0)   //  2     0                  Sigfox
#define RADIOLIB_LR11X0_PACKET_TYPE_LR_FHSS                     (0x04UL << 0)   //  2     0                  GMSK/LR-FHSS
#define RADIOLIB_LR11X0_PACKET_TYPE_RANGING                     (0x05UL << 0)   //  2     0                  ranging
#define RADIOLIB_LR11X0_PACKET_TYPE_BLE                         (0x06UL << 0)   //  2     0                  BLE beacon
 
// RADIOLIB_LR11X0_CMD_SET_MODULATION_PARAMS
#define RADIOLIB_LR11X0_LORA_BW_62_5                            (0x03UL << 0)   //  7     0     LoRa bandwidth: 62.5 kHz
#define RADIOLIB_LR11X0_LORA_BW_125_0                           (0x04UL << 0)   //  7     0                     125.0 kHz
#define RADIOLIB_LR11X0_LORA_BW_250_0                           (0x05UL << 0)   //  7     0                     250.0 kHz
#define RADIOLIB_LR11X0_LORA_BW_500_0                           (0x06UL << 0)   //  7     0                     500.0 kHz
#define RADIOLIB_LR11X0_LORA_CR_4_5_SHORT                       (0x01UL << 0)   //  7     0     coding rate: 4/5 with short interleaver
#define RADIOLIB_LR11X0_LORA_CR_4_6_SHORT                       (0x02UL << 0)   //  7     0                  4/6 with short interleaver
#define RADIOLIB_LR11X0_LORA_CR_4_7_SHORT                       (0x03UL << 0)   //  7     0                  4/7 with short interleaver
#define RADIOLIB_LR11X0_LORA_CR_4_8_SHORT                       (0x04UL << 0)   //  7     0                  4/8 with short interleaver
#define RADIOLIB_LR11X0_LORA_CR_4_5_LONG                        (0x05UL << 0)   //  7     0                  4/5 with long interleaver
#define RADIOLIB_LR11X0_LORA_CR_4_6_LONG                        (0x06UL << 0)   //  7     0                  4/6 with long interleaver
#define RADIOLIB_LR11X0_LORA_CR_4_8_LONG                        (0x07UL << 0)   //  7     0                  4/8 with long interleaver
#define RADIOLIB_LR11X0_LORA_LDRO_DISABLED                      (0x00UL << 0)   //  7     0     low data rate optimize: disabled
#define RADIOLIB_LR11X0_LORA_LDRO_ENABLED                       (0x01UL << 0)   //  7     0                             enabled
#define RADIOLIB_LR11X0_GFSK_BIT_RATE_DIV_DISABLED              (0x00UL << 31)  //  31    0     divide bit rate value by 256: disabled
#define RADIOLIB_LR11X0_GFSK_BIT_RATE_DIV_ENABLED               (0x01UL << 31)  //  31    0                                   enabled
#define RADIOLIB_LR11X0_GFSK_SHAPING_NONE                       (0x00UL << 0)   //  7     0     shaping filter: none
#define RADIOLIB_LR11X0_GFSK_SHAPING_GAUSSIAN_BT_0_3            (0x08UL << 0)   //  7     0                     Gaussian, BT = 0.3
#define RADIOLIB_LR11X0_GFSK_SHAPING_GAUSSIAN_BT_0_5            (0x09UL << 0)   //  7     0                     Gaussian, BT = 0.5
#define RADIOLIB_LR11X0_GFSK_SHAPING_GAUSSIAN_BT_0_7            (0x0AUL << 0)   //  7     0                     Gaussian, BT = 0.7
#define RADIOLIB_LR11X0_GFSK_SHAPING_GAUSSIAN_BT_1_0            (0x0BUL << 0)   //  7     0                     Gaussian, BT = 1.0
#define RADIOLIB_LR11X0_GFSK_SHAPING_RAISED_COSINE_BT_0_7       (0x16UL << 0)   //  7     0                     raised cosine, BT = 0.7
#define RADIOLIB_LR11X0_GFSK_RX_BW_4_8                          (0x1FUL << 0)   //  7     0     GFSK Rx bandwidth: 4.8 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_5_8                          (0x17UL << 0)   //  7     0                        5.8 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_7_3                          (0x0FUL << 0)   //  7     0                        7.3 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_9_7                          (0x1EUL << 0)   //  7     0                        9.7 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_11_7                         (0x16UL << 0)   //  7     0                        11.7 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_14_6                         (0x0EUL << 0)   //  7     0                        14.6 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_19_5                         (0x1DUL << 0)   //  7     0                        19.5 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_23_4                         (0x15UL << 0)   //  7     0                        23.4 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_29_3                         (0x0DUL << 0)   //  7     0                        29.3 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_39_0                         (0x1CUL << 0)   //  7     0                        39.0 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_46_9                         (0x14UL << 0)   //  7     0                        46.9 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_58_6                         (0x0CUL << 0)   //  7     0                        58.6 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_78_2                         (0x1BUL << 0)   //  7     0                        78.2 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_93_8                         (0x13UL << 0)   //  7     0                        93.8 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_117_3                        (0x0BUL << 0)   //  7     0                        117.3 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_156_2                        (0x1AUL << 0)   //  7     0                        156.2 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_187_2                        (0x12UL << 0)   //  7     0                        187.2 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_234_3                        (0x0AUL << 0)   //  7     0                        234.3 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_312_0                        (0x19UL << 0)   //  7     0                        312.0 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_373_6                        (0x11UL << 0)   //  7     0                        373.6 kHz
#define RADIOLIB_LR11X0_GFSK_RX_BW_467_0                        (0x09UL << 0)   //  7     0                        467.0 kHz
#define RADIOLIB_LR11X0_LR_FHSS_BIT_RATE                        (488.28215)     //  31    0     LR FHSS bit rate: 488.28215 bps
#define RADIOLIB_LR11X0_LR_FHSS_BIT_RATE_RAW                    (0x8001E848UL)  //  31    0                       488.28215 bps in raw
#define RADIOLIB_LR11X0_LR_FHSS_SHAPING_GAUSSIAN_BT_1_0         (0x0BUL << 0)   //  7     0     shaping filter: Gaussian, BT = 1.0
#define RADIOLIB_LR11X0_SIGFOX_SHAPING_GAUSSIAN_BT_0_7          (0x16UL << 0)   //  7     0     shaping filter: Gaussian, BT = 0.7
 
// RADIOLIB_LR11X0_CMD_SET_PACKET_PARAMS
#define RADIOLIB_LR11X0_LORA_HEADER_EXPLICIT                    (0x00UL << 0)   //  7     0     LoRa header mode: explicit
#define RADIOLIB_LR11X0_LORA_HEADER_IMPLICIT                    (0x01UL << 0)   //  7     0                       implicit
#define RADIOLIB_LR11X0_LORA_PAYLOAD_LEN_ANY                    (0x00UL << 0)   //  7     0     accept any payload length
#define RADIOLIB_LR11X0_LORA_CRC_ENABLED                        (0x01UL << 0)   //  7     0     CRC: enabled
#define RADIOLIB_LR11X0_LORA_CRC_DISABLED                       (0x00UL << 0)   //  7     0          disabled
#define RADIOLIB_LR11X0_LORA_IQ_STANDARD                        (0x00UL << 0)   //  7     0     IQ setup: standard
#define RADIOLIB_LR11X0_LORA_IQ_INVERTED                        (0x01UL << 0)   //  7     0               inverted
#define RADIOLIB_LR11X0_GFSK_PREAMBLE_DETECT_DISABLED           (0x00UL << 0)   //  7     0     preamble detector: disabled
#define RADIOLIB_LR11X0_GFSK_PREAMBLE_DETECT_8_BITS             (0x04UL << 0)   //  7     0                        8 bits
#define RADIOLIB_LR11X0_GFSK_PREAMBLE_DETECT_16_BITS            (0x05UL << 0)   //  7     0                        16 bits
#define RADIOLIB_LR11X0_GFSK_PREAMBLE_DETECT_24_BITS            (0x06UL << 0)   //  7     0                        24 bits
#define RADIOLIB_LR11X0_GFSK_PREAMBLE_DETECT_32_BITS            (0x07UL << 0)   //  7     0                        32 bits
#define RADIOLIB_LR11X0_GFSK_ADDR_FILTER_DISABLED               (0x00UL << 0)   //  7     0     address filtering: disabled
#define RADIOLIB_LR11X0_GFSK_ADDR_FILTER_NODE                   (0x01UL << 0)   //  7     0                        node address
#define RADIOLIB_LR11X0_GFSK_ADDR_FILTER_NODE_BROADCAST         (0x02UL << 0)   //  7     0                        node and broadcast address
#define RADIOLIB_LR11X0_GFSK_PACKET_LENGTH_FIXED                (0x00UL << 0)   //  7     0     packet length: fixed
#define RADIOLIB_LR11X0_GFSK_PACKET_LENGTH_VARIABLE             (0x01UL << 0)   //  7     0                    variable
#define RADIOLIB_LR11X0_GFSK_PACKET_LENGTH_VARIABLE_SX128X      (0x02UL << 0)   //  7     0                    variable, SX128x 9-bit length encoding
#define RADIOLIB_LR11X0_GFSK_PAYLOAD_LEN_ANY                    (0x00UL << 0)   //  7     0     accept any payload length
#define RADIOLIB_LR11X0_GFSK_CRC_DISABLED                       (0x01UL << 0)   //  7     0     CRC: disabled
#define RADIOLIB_LR11X0_GFSK_CRC_1_BYTE                         (0x00UL << 0)   //  7     0          1-byte
#define RADIOLIB_LR11X0_GFSK_CRC_2_BYTE                         (0x02UL << 0)   //  7     0          2-byte
#define RADIOLIB_LR11X0_GFSK_CRC_1_BYTE_INV                     (0x04UL << 0)   //  7     0          1-byte, inverted
#define RADIOLIB_LR11X0_GFSK_CRC_2_BYTE_INV                     (0x06UL << 0)   //  7     0          2-byte, inverted
#define RADIOLIB_LR11X0_GFSK_WHITENING_DISABLED                 (0x00UL << 0)   //  7     0     whitening: disabled
#define RADIOLIB_LR11X0_GFSK_WHITENING_ENABLED                  (0x01UL << 0)   //  7     0                enabled
 
// RADIOLIB_LR11X0_CMD_SET_TX_PARAMS
#define RADIOLIB_LR11X0_PA_RAMP_48U                             (0x02UL << 0)   //  7     0     PA ramp time: 48 us
 
// RADIOLIB_LR11X0_CMD_SET_RX_TX_FALLBACK_MODE
#define RADIOLIB_LR11X0_FALLBACK_MODE_STBY_RC                   (0x01UL << 0)   //  1     0     fallback mode after Rx/Tx: standby with RC
#define RADIOLIB_LR11X0_FALLBACK_MODE_STBY_XOSC                 (0x02UL << 0)   //  1     0                                standby with XOSC
#define RADIOLIB_LR11X0_FALLBACK_MODE_FS                        (0x03UL << 0)   //  1     0                                frequency synthesis
 
// RADIOLIB_LR11X0_CMD_SET_RX_DUTY_CYCLE
#define RADIOLIB_LR11X0_RX_DUTY_CYCLE_MODE_RX                   (0x00UL << 0)   //  0     0     mode in Rx windows: Rx (default)
#define RADIOLIB_LR11X0_RX_DUTY_CYCLE_MODE_CAD                  (0x01UL << 0)   //  0     0                         CAD
#define RADIOLIB_LR11X0_TIMING_STEP                             (1.0f/32768.0f) //  23    0     timing step fo delays
 
// RADIOLIB_LR11X0_CMD_SET_PA_CONFIG
#define RADIOLIB_LR11X0_PA_SEL_LP                               (0x00UL << 0)   //  7     0     PA select: low power PA
#define RADIOLIB_LR11X0_PA_SEL_HP                               (0x01UL << 0)   //  7     0                high power PA
#define RADIOLIB_LR11X0_PA_SEL_HF                               (0x02UL << 0)   //  7     0                high frequency PA
#define RADIOLIB_LR11X0_PA_SUPPLY_INTERNAL                      (0x00UL << 0)   //  7     0     PA power source: internal
#define RADIOLIB_LR11X0_PA_SUPPLY_VBAT                          (0x01UL << 0)   //  7     0                      VBAT (required for >= 14 dBm)
 
// RADIOLIB_LR11X0_CMD_STOP_TIMEOUT_ON_PREAMBLE
#define RADIOLIB_LR11X0_STOP_ON_SYNC_HEADER                     (0x00UL << 0)   //  0     0     stop timeout on: sync word or header (default)
#define RADIOLIB_LR11X0_STOP_ON_PREAMBLE                        (0x01UL << 0)   //  0     0                      preamble
 
// RADIOLIB_LR11X0_CMD_GET_RANGING_RESULT
#define RADIOLIB_LR11X0_RANGING_RESULT_DISTANCE                 (0)             //  7     0     ranging result type: distance
#define RADIOLIB_LR11X0_RANGING_RESULT_RSSI                     (1)             //  7     0                          RSSI
 
// RADIOLIB_LR11X0_CMD_SET_RX_BOOSTED
#define RADIOLIB_LR11X0_RX_BOOSTED_ENABLED                      (0x01UL << 0)   //  0     0     Rx boosted mode: enabled
#define RADIOLIB_LR11X0_RX_BOOSTED_DISABLED                     (0x00UL << 0)   //  0     0                      disabled
 
// RADIOLIB_LR11X0_CMD_SET_LORA_SYNC_WORD
#define RADIOLIB_LR11X0_LORA_SYNC_WORD_PRIVATE                  (0x12)
#define RADIOLIB_LR11X0_LORA_SYNC_WORD_PUBLIC                   (0x34)
 
// RADIOLIB_LR11X0_CMD_LR_FHSS_BUILD_FRAME
#define RADIOLIB_LR11X0_LR_FHSS_CR_5_6                          (0x00UL << 0)   //  7     0     LR FHSS coding rate: 5/6
#define RADIOLIB_LR11X0_LR_FHSS_CR_2_3                          (0x01UL << 0)   //  7     0                          2/3
#define RADIOLIB_LR11X0_LR_FHSS_CR_1_2                          (0x02UL << 0)   //  7     0                          1/2
#define RADIOLIB_LR11X0_LR_FHSS_CR_1_3                          (0x03UL << 0)   //  7     0                          1/3
#define RADIOLIB_LR11X0_LR_FHSS_MOD_TYPE_GMSK                   (0x00UL << 0)   //  7     0     LR FHSS modulation: GMSK
#define RADIOLIB_LR11X0_LR_FHSS_GRID_STEP_FCC                   (0x00UL << 0)   //  7     0     LR FHSS step size: 25.390625 kHz (FCC)
#define RADIOLIB_LR11X0_LR_FHSS_GRID_STEP_NON_FCC               (0x01UL << 0)   //  7     0                        3.90625 kHz (non-FCC)
#define RADIOLIB_LR11X0_LR_FHSS_HOPPING_DISABLED                (0x00UL << 0)   //  7     0     LR FHSS hopping: disabled
#define RADIOLIB_LR11X0_LR_FHSS_HOPPING_ENABLED                 (0x01UL << 0)   //  7     0                      enabled
#define RADIOLIB_LR11X0_LR_FHSS_BW_39_06                        (0x00UL << 0)   //  7     0     LR FHSS bandwidth: 39.06 kHz
#define RADIOLIB_LR11X0_LR_FHSS_BW_85_94                        (0x01UL << 0)   //  7     0                        85.94 kHz
#define RADIOLIB_LR11X0_LR_FHSS_BW_136_72                       (0x02UL << 0)   //  7     0                        136.72 kHz
#define RADIOLIB_LR11X0_LR_FHSS_BW_183_59                       (0x03UL << 0)   //  7     0                        183.59 kHz
#define RADIOLIB_LR11X0_LR_FHSS_BW_335_94                       (0x04UL << 0)   //  7     0                        335.94 kHz
#define RADIOLIB_LR11X0_LR_FHSS_BW_386_72                       (0x05UL << 0)   //  7     0                        386.72 kHz
#define RADIOLIB_LR11X0_LR_FHSS_BW_722_66                       (0x06UL << 0)   //  7     0                        722.66 kHz
#define RADIOLIB_LR11X0_LR_FHSS_BW_773_44                       (0x07UL << 0)   //  7     0                        773.44 kHz
#define RADIOLIB_LR11X0_LR_FHSS_BW_1523_4                       (0x08UL << 0)   //  7     0                        1523.4 kHz
#define RADIOLIB_LR11X0_LR_FHSS_BW_1574_2                       (0x09UL << 0)   //  7     0                        1574.2 kHz
#define RADIOLIB_LR11X0_LR_FHSS_HEADER_BITS                     (114)           //  7     0     LR FHSS packet bit widths: header
#define RADIOLIB_LR11X0_LR_FHSS_FRAG_BITS                       (48)            //  7     0                                payload fragment
#define RADIOLIB_LR11X0_LR_FHSS_BLOCK_PREAMBLE_BITS             (2)             //  7     0                                block preamble
#define RADIOLIB_LR11X0_LR_FHSS_BLOCK_BITS                      (RADIOLIB_LR11X0_LR_FHSS_FRAG_BITS + RADIOLIB_LR11X0_LR_FHSS_BLOCK_PREAMBLE_BITS)
 
// RADIOLIB_LR11X0_CMD_GET_LORA_RX_HEADER_INFOS
#define RADIOLIB_LR11X0_LAST_HEADER_CRC_ENABLED                 (0x01UL << 4)   //  4     4     last header CRC: enabled
#define RADIOLIB_LR11X0_LAST_HEADER_CRC_DISABLED                (0x00UL << 4)   //  4     4                      disabled
 
// RADIOLIB_LR11X0_CMD_WIFI_SCAN
#define RADIOLIB_LR11X0_WIFI_SCAN_802_11_B                      (0x01UL << 0)   //  7     0     Wi-Fi type to scan: 802.11b
#define RADIOLIB_LR11X0_WIFI_SCAN_802_11_G                      (0x02UL << 0)   //  7     0                         802.11g
#define RADIOLIB_LR11X0_WIFI_SCAN_802_11_N                      (0x03UL << 0)   //  7     0                         802.11n
#define RADIOLIB_LR11X0_WIFI_SCAN_ALL                           (0x04UL << 0)   //  7     0                         all (802.11b first)
#define RADIOLIB_LR11X0_WIFI_ACQ_MODE_BEACON_ONLY               (0x01UL << 0)   //  7     0     Wi-Fi acquisition mode: beacon only
#define RADIOLIB_LR11X0_WIFI_ACQ_MODE_BEACON_PACKET             (0x02UL << 0)   //  7     0                             beacon and packet
#define RADIOLIB_LR11X0_WIFI_ACQ_MODE_FULL_TRAFFIC              (0x03UL << 0)   //  7     0                             full traffic
#define RADIOLIB_LR11X0_WIFI_ACQ_MODE_FULL_BEACON               (0x04UL << 0)   //  7     0                             full beacon
#define RADIOLIB_LR11X0_WIFI_ACQ_MODE_SSID_BEACON               (0x05UL << 0)   //  7     0                             SSID beacon
#define RADIOLIB_LR11X0_WIFI_ABORT_ON_TIMEOUT_ENABLED           (0x01UL << 0)   //  7     0     abort scanning on preamble timeout: enabled
#define RADIOLIB_LR11X0_WIFI_ABORT_ON_TIMEOUT_DISABLED          (0x00UL << 0)   //  7     0                                         disabled
#define RADIOLIB_LR11X0_WIFI_MAX_NUM_RESULTS                    (32)            //  7     0     maximum possible number of Wi-Fi scan results
#define RADIOLIB_LR11X0_WIFI_ALL_CHANNELS                       (0x3FFFUL)      //  16    0     scan all channels
 
// RADIOLIB_LR11X0_CMD_WIFI_READ_RESULTS
#define RADIOLIB_LR11X0_WIFI_RESULT_TYPE_COMPLETE               (0x01UL << 0)   //  7     0     Wi-Fi scan result type: complete
#define RADIOLIB_LR11X0_WIFI_RESULT_TYPE_BASIC                  (0x04UL << 0)   //  7     0                             basic
#define RADIOLIB_LR11X0_WIFI_RESULT_MAX_LEN                     (79)            //  7     0     maximum possible Wi-Fi scan size
#define RADIOLIB_LR11X0_WIFI_RESULT_MAC_LEN                     (6)             //  7     0     MAC address length in bytes
#define RADIOLIB_LR11X0_WIFI_RESULT_SSID_LEN                    (32)            //  7     0     SSID length in bytes
 
// RADIOLIB_LR11X0_CMD_GNSS_SET_CONSTELLATION_TO_USE
#define RADIOLIB_LR11X0_GNSS_CONSTELLATION_GPS                  (0x01UL << 0)   //  7     0     GNSS constellation to use: GPS
#define RADIOLIB_LR11X0_GNSS_CONSTELLATION_BEIDOU               (0x01UL << 1)   //  7     0                                BeiDou
 
// RADIOLIB_LR11X0_CMD_GNSS_SET_MODE
#define RADIOLIB_LR11X0_GNSS_MODE_SINGLE_SCAN                   (0x00UL << 0)   //  7     0     GNSS scanning mode: single/legacy
#define RADIOLIB_LR11X0_GNSS_MODE_SINGLE_MULTIPLE               (0x03UL << 1)   //  7     0                         multiple/advanced
 
// RADIOLIB_LR11X0_CMD_GNSS_AUTONOMOUS
#define RADIOLIB_LR11X0_GNSS_RES_PSEUDO_DOPPLER_ENABLED         (0x01UL << 0)   //  0     0     GNSS results in NAV message: pseudo-range (in single scan mode) or Doppler information (in multiple scan mode)
#define RADIOLIB_LR11X0_GNSS_RES_PSEUDO_DOPPLER_DISABLED        (0x00UL << 0)   //  0     0                                  not included
#define RADIOLIB_LR11X0_GNSS_RES_DOPPLER_ENABLED                (0x01UL << 1)   //  1     1                                  Doppler information
#define RADIOLIB_LR11X0_GNSS_RES_DOPPLER_DISABLED               (0x00UL << 1)   //  1     1                                  not included
#define RADIOLIB_LR11X0_GNSS_NB_SV_ALL                          (0x00UL << 0)   //  7     0     include all detected satellites
#define RADIOLIB_LR11X0_GNSS_AUTO_EFFORT_MODE                   (0x00UL << 0)   //  7     0     reserved, always 0
 
// RADIOLIB_LR11X0_CMD_GNSS_ASSISTED
#define RADIOLIB_LR11X0_GNSS_ASSIST_LOW_POWER                   (0x00UL << 0)   //  7     0     effort mode: low power
#define RADIOLIB_LR11X0_GNSS_ASSIST_BEST_EFFORT                 (0x01UL << 0)   //  7     0                  best effort
 
// RADIOLIB_LR11X0_CMD_GNSS_GET_CONTEXT_STATUS
#define RADIOLIB_LR11X0_GNSS_CONTEXT_ERR_NONE                   (0x00UL << 0)   //  7     4     error code: none
#define RADIOLIB_LR11X0_GNSS_CONTEXT_ERR_ALMANAC_OLD            (0x01UL << 0)   //  7     4                 almanac too old
#define RADIOLIB_LR11X0_GNSS_CONTEXT_ERR_ALMANAC_CRC            (0x02UL << 0)   //  7     4                 almanac CRC mismatch
#define RADIOLIB_LR11X0_GNSS_CONTEXT_ERR_FLASH                  (0x03UL << 0)   //  7     4                 flash integrity error
#define RADIOLIB_LR11X0_GNSS_CONTEXT_ERR_ALMANAC_UPD            (0x04UL << 0)   //  7     4                 almanac update not allowed
#define RADIOLIB_LR11X0_GNSS_CONTEXT_FREQ_SPACE_250_HZ          (0x00UL << 0)   //  8     7     frequency search space: 250 Hz
#define RADIOLIB_LR11X0_GNSS_CONTEXT_FREQ_SPACE_500_HZ          (0x01UL << 0)   //  8     7                             500 H
#define RADIOLIB_LR11X0_GNSS_CONTEXT_FREQ_SPACE_1000_HZ         (0x02UL << 0)   //  8     7                             1000 Hz
#define RADIOLIB_LR11X0_GNSS_CONTEXT_FREQ_SPACE_2000_HZ         (0x03UL << 0)   //  8     7                             2000 Hz
 
// RADIOLIB_LR11X0_CMD_GNSS_GET_SV_VISIBLE
#define RADIOLIB_LR11X0_SV_CONSTELLATION_GPS                    (0x00UL << 0)   //  7     0     GNSS constellation: GPS
#define RADIOLIB_LR11X0_SV_CONSTELLATION_BEIDOU                 (0x01UL << 0)   //  7     0                         BeiDou
 
// RADIOLIB_LR11X0_CMD_GNSS_ALMANAC_FULL_UPDATE
#define RADIOLIB_LR11X0_GNSS_ALMANAC_HEADER_ID                  (0x80UL << 0)   //  7     0     starting byte of GNSS almanac header
#define RADIOLIB_LR11X0_GNSS_ALMANAC_BLOCK_SIZE                 (20)
 
// RADIOLIB_LR11X0_CMD_CRYPTO_SET_KEY
#define RADIOLIB_LR11X0_CRYPTO_STATUS_SUCCESS                   (0x00UL << 0)   //  7     0     crypto engine status: success
#define RADIOLIB_LR11X0_CRYPTO_STATUS_FAIL_CMAC                 (0x01UL << 0)   //  7     0                           MIC check failed
#define RADIOLIB_LR11X0_CRYPTO_STATUS_INV_KEY_ID                (0x03UL << 0)   //  7     0                           key/parameter source or destination ID error
#define RADIOLIB_LR11X0_CRYPTO_STATUS_BUF_SIZE                  (0x05UL << 0)   //  7     0                           data buffer size invalid
#define RADIOLIB_LR11X0_CRYPTO_STATUS_ERROR                     (0x06UL << 0)   //  7     0                           generic error
 
// RADIOLIB_LR11X0_CMD_CRYPTO_PROCESS_JOIN_ACCEPT
#define RADIOLIB_LR11X0_CRYPTO_LORAWAN_VERSION_1_0              (0x00UL << 0)   //  7     0     LoRaWAN version: 1.0.x
#define RADIOLIB_LR11X0_CRYPTO_LORAWAN_VERSION_1_1              (0x01UL << 0)   //  7     0                      1.1
 
// LR11X0 SPI register variables
 
// RADIOLIB_LR11X0_REG_SF6_SX127X_COMPAT
#define RADIOLIB_LR11X0_SF6_SX126X                              (0x00UL << 18)  //  18    18    SF6 mode: SX126x series
#define RADIOLIB_LR11X0_SF6_SX127X                              (0x01UL << 18)  //  18    18              SX127x series
 
// RADIOLIB_LR11X0_REG_LORA_HIGH_POWER_FIX
#define RADIOLIB_LR11X0_LORA_HIGH_POWER_FIX                     (0x00UL << 30)  //  30    30    fix for errata
 
// RADIOLIB_LR11X0_REG_LNA_MODE
#define RADIOLIB_LR11X0_LNA_MODE_SINGLE_RFI_N                   (0x01UL << 4)   //  7     4     LNA mode: single-ended RFI_N
#define RADIOLIB_LR11X0_LNA_MODE_SINGLE_RFI_P                   (0x02UL << 4)   //  7     4               single-ended RFI_P
#define RADIOLIB_LR11X0_LNA_MODE_DIFFERENTIAL                   (0x03UL << 4)   //  7     4               differential (default)
 
struct LR11x0WifiResult_t {
  char type;
 
  uint8_t dataRateId;
 
  uint16_t channelFreq;
 
  uint8_t origin;
 
  bool ap;
 
  float rssi;
 
  uint8_t mac[RADIOLIB_LR11X0_WIFI_RESULT_MAC_LEN];
};
 
struct LR11x0WifiResultFull_t: public LR11x0WifiResult_t {
  uint8_t frameType;
 
  uint8_t frameSubType;
 
  bool toDistributionSystem;
 
  bool fromDistributionSystem;
 
  uint16_t phiOffset;
 
  uint64_t timestamp;
 
  uint32_t periodBeacon;
};
 
struct LR11x0WifiResultExtended_t: public LR11x0WifiResultFull_t {
  uint8_t rate;
 
  uint16_t service;
 
  uint16_t length;
 
  uint8_t mac0[RADIOLIB_LR11X0_WIFI_RESULT_MAC_LEN];
 
  uint8_t mac2[RADIOLIB_LR11X0_WIFI_RESULT_MAC_LEN];
 
  uint16_t seqCtrl;
 
  uint8_t ssid[RADIOLIB_LR11X0_WIFI_RESULT_SSID_LEN];
 
  uint8_t currentChannel;
 
  char countryCode[3];
 
  uint8_t ioReg;
 
  bool fcsCheckOk;
};
 
struct LR11x0VersionInfo_t {
  uint8_t hardware;
 
  uint8_t device;
  
  uint8_t fwMajor;
  
  uint8_t fwMinor;
 
  uint8_t fwMajorWiFi;
  
  uint8_t fwMinorWiFi;
 
  uint8_t fwGNSS;
  
  uint8_t almanacGNSS;
};
 
struct LR11x0GnssResult_t {
 
};
 
class LR11x0: public PhysicalLayer {
  public:
    // introduce PhysicalLayer overloads
    using PhysicalLayer::transmit;
    using PhysicalLayer::receive;
    using PhysicalLayer::startTransmit;
    using PhysicalLayer::readData;
 
    explicit LR11x0(Module* mod);
 
    enum OpMode_t {
        MODE_END_OF_TABLE = Module::MODE_END_OF_TABLE,
        MODE_STBY = Module::MODE_IDLE,
        MODE_RX = Module::MODE_RX,
        MODE_TX = Module::MODE_TX,
        MODE_TX_HP,
        MODE_TX_HF,
        MODE_GNSS,
        MODE_WIFI,
    };
 
    bool XTAL;
    
    int16_t begin(float bw, uint8_t sf, uint8_t cr, uint8_t syncWord, uint16_t preambleLength, float tcxoVoltage);
 
    int16_t beginGFSK(float br, float freqDev, float rxBw, uint16_t preambleLength, float tcxoVoltage);
 
    int16_t beginLRFHSS(uint8_t bw, uint8_t cr, float tcxoVoltage);
 
    int16_t reset();
 
    int16_t transmit(const uint8_t* data, size_t len, uint8_t addr = 0) override;
 
    int16_t receive(uint8_t* data, size_t len) override;
 
    int16_t transmitDirect(uint32_t frf = 0) override;
 
    int16_t receiveDirect() override;
 
    int16_t scanChannel() override;
 
    int16_t scanChannel(ChannelScanConfig_t config) override;
 
    int16_t standby() override;
 
    int16_t standby(uint8_t mode, bool wakeup = true);
 
    int16_t sleep() override;
 
    int16_t sleep(bool retainConfig, uint32_t sleepTime);
    
    // interrupt methods
 
    void setIrqAction(void (*func)(void));
 
    void clearIrqAction();
 
    void setPacketReceivedAction(void (*func)(void)) override;
 
    void clearPacketReceivedAction() override;
 
    void setPacketSentAction(void (*func)(void)) override;
 
    void clearPacketSentAction() override;
 
    int16_t startTransmit(const uint8_t* data, size_t len, uint8_t addr = 0) override;
 
    int16_t finishTransmit() override;
 
    int16_t startReceive() override;
 
    int16_t startReceive(uint32_t timeout, uint32_t irqFlags = RADIOLIB_LR11X0_IRQ_RX_DONE, uint32_t irqMask = 0, size_t len = 0);
 
    uint32_t getIrqStatus();
 
    int16_t readData(uint8_t* data, size_t len) override;
    
    int16_t startChannelScan() override;
 
    int16_t startChannelScan(const ChannelScanConfig_t &config) override;
 
    int16_t getChannelScanResult() override;
 
    // configuration methods
 
    int16_t setBandwidth(float bw);
 
    int16_t setSpreadingFactor(uint8_t sf, bool legacy = false);
 
    int16_t setCodingRate(uint8_t cr, bool longInterleave = false);
 
    int16_t setSyncWord(uint32_t syncWord);
 
    int16_t setBitRate(float br) override;
 
    int16_t setFrequencyDeviation(float freqDev) override;
 
    int16_t setRxBandwidth(float rxBw);
    
    int16_t setSyncWord(uint8_t* syncWord, size_t len) override;
 
    int16_t setSyncBits(uint8_t *syncWord, uint8_t bitsLen);
 
    int16_t setNodeAddress(uint8_t nodeAddr);
 
    int16_t setBroadcastAddress(uint8_t broadAddr);
 
    int16_t disableAddressFiltering();
 
    int16_t setDataShaping(uint8_t sh) override;
 
    int16_t setEncoding(uint8_t encoding) override;
 
    int16_t fixedPacketLengthMode(uint8_t len = RADIOLIB_LR11X0_MAX_PACKET_LENGTH);
 
    int16_t variablePacketLengthMode(uint8_t maxLen = RADIOLIB_LR11X0_MAX_PACKET_LENGTH);
 
    int16_t setWhitening(bool enabled, uint16_t initial = 0x01FF);
 
    int16_t setDataRate(DataRate_t dr) override;
 
    int16_t checkDataRate(DataRate_t dr) override;
 
    int16_t setPreambleLength(size_t preambleLength) override;
 
    int16_t setTCXO(float voltage, uint32_t delay = 5000);
 
    int16_t setCRC(uint8_t len, uint32_t initial = 0x00001D0FUL, uint32_t polynomial = 0x00001021UL, bool inverted = true);
 
    int16_t invertIQ(bool enable) override;
 
    float getRSSI() override;
 
    float getSNR() override;
 
    float getFrequencyError();
 
    size_t getPacketLength(bool update = true) override;
 
    size_t getPacketLength(bool update, uint8_t* offset);
 
    RadioLibTime_t getTimeOnAir(size_t len) override;
 
    RadioLibTime_t calculateRxTimeout(RadioLibTime_t timeoutUs) override;
 
    uint32_t getIrqFlags() override;
 
    int16_t setIrqFlags(uint32_t irq) override;
 
    int16_t clearIrqFlags(uint32_t irq) override;
 
    uint8_t randomByte() override;
 
    int16_t implicitHeader(size_t len);
 
    int16_t explicitHeader();
 
    float getDataRate() const;
 
    int16_t setRegulatorLDO();
 
    int16_t setRegulatorDCDC();
 
    int16_t setRxBoostedGainMode(bool en);
 
    void setRfSwitchTable(const uint32_t (&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[]);
 
    int16_t setLrFhssConfig(uint8_t bw, uint8_t cr, uint8_t hdrCount = 3, uint16_t hopSeed = 0x13A);
    
    int16_t startWifiScan(char wifiType, uint8_t mode = RADIOLIB_LR11X0_WIFI_ACQ_MODE_FULL_BEACON, uint16_t chanMask = RADIOLIB_LR11X0_WIFI_ALL_CHANNELS, uint8_t numScans = 16, uint16_t timeout = 100);
 
    void setWiFiScanAction(void (*func)(void));
 
    void clearWiFiScanAction();
 
    int16_t getWifiScanResultsCount(uint8_t* count);
 
    int16_t getWifiScanResult(LR11x0WifiResult_t* result, uint8_t index, bool brief = false);
    
    int16_t wifiScan(uint8_t wifiType, uint8_t* count, uint8_t mode = RADIOLIB_LR11X0_WIFI_ACQ_MODE_FULL_BEACON, uint16_t chanMask = RADIOLIB_LR11X0_WIFI_ALL_CHANNELS, uint8_t numScans = 16, uint16_t timeout = 100);
   
    int16_t getVersionInfo(LR11x0VersionInfo_t* info);
    
    int16_t updateFirmware(const uint32_t* image, size_t size, bool nonvolatile = true);
    
#if !RADIOLIB_GODMODE && !RADIOLIB_LOW_LEVEL
  protected:
#endif
    Module* getMod() override;
 
    // LR11x0 SPI command implementations
    int16_t writeRegMem32(uint32_t addr, uint32_t* data, size_t len);
    int16_t readRegMem32(uint32_t addr, uint32_t* data, size_t len);
    int16_t writeBuffer8(uint8_t* data, size_t len);
    int16_t readBuffer8(uint8_t* data, size_t len, size_t offset);
    int16_t clearRxBuffer(void);
    int16_t writeRegMemMask32(uint32_t addr, uint32_t mask, uint32_t data);
 
    int16_t getStatus(uint8_t* stat1, uint8_t* stat2, uint32_t* irq);
    int16_t getVersion(uint8_t* hw, uint8_t* device, uint8_t* major, uint8_t* minor);
    int16_t getErrors(uint16_t* err);
    int16_t clearErrors(void);
    int16_t calibrate(uint8_t params);
    int16_t setRegMode(uint8_t mode);
    int16_t calibImage(float freq1, float freq2);
    int16_t setDioAsRfSwitch(uint8_t en, uint8_t stbyCfg, uint8_t rxCfg, uint8_t txCfg, uint8_t txHpCfg, uint8_t txHfCfg, uint8_t gnssCfg, uint8_t wifiCfg);
    int16_t setDioIrqParams(uint32_t irq1, uint32_t irq2);
    int16_t setDioIrqParams(uint32_t irq);
    int16_t clearIrq(uint32_t irq);
    int16_t configLfClock(uint8_t setup);
    int16_t setTcxoMode(uint8_t tune, uint32_t delay);
    int16_t reboot(bool stay);
    int16_t getVbat(float* vbat);
    int16_t getTemp(float* temp);
    int16_t setFs(void);
    int16_t getRandomNumber(uint32_t* rnd);
    int16_t eraseInfoPage(void);
    int16_t writeInfoPage(uint16_t addr, const uint32_t* data, size_t len);
    int16_t readInfoPage(uint16_t addr, uint32_t* data, size_t len);
    int16_t getChipEui(uint8_t* eui);
    int16_t getSemtechJoinEui(uint8_t* eui);
    int16_t deriveRootKeysAndGetPin(uint8_t* pin);
    int16_t enableSpiCrc(bool en);
    int16_t driveDiosInSleepMode(bool en);
 
    int16_t resetStats(void);
    int16_t getStats(uint16_t* nbPktReceived, uint16_t* nbPktCrcError, uint16_t* data1, uint16_t* data2);
    int16_t getPacketType(uint8_t* type);
    int16_t getRxBufferStatus(uint8_t* len, uint8_t* startOffset);
    int16_t getPacketStatusLoRa(float* rssiPkt, float* snrPkt, float* signalRssiPkt);
    int16_t getPacketStatusGFSK(float* rssiSync, float* rssiAvg, uint8_t* rxLen, uint8_t* stat);
    int16_t getRssiInst(float* rssi);
    int16_t setGfskSyncWord(uint8_t* sync);
    int16_t setLoRaPublicNetwork(bool pub);
    int16_t setRx(uint32_t timeout);
    int16_t setTx(uint32_t timeout);
    int16_t setRfFrequency(uint32_t rfFreq);
    int16_t autoTxRx(uint32_t delay, uint8_t intMode, uint32_t timeout);
    int16_t setCadParams(uint8_t symNum, uint8_t detPeak, uint8_t detMin, uint8_t cadExitMode, uint32_t timeout);
    int16_t setPacketType(uint8_t type);
    int16_t setModulationParamsLoRa(uint8_t sf, uint8_t bw, uint8_t cr, uint8_t ldro);
    int16_t setModulationParamsGFSK(uint32_t br, uint8_t sh, uint8_t rxBw, uint32_t freqDev);
    int16_t setModulationParamsLrFhss(uint32_t br, uint8_t sh);
    int16_t setModulationParamsSigfox(uint32_t br, uint8_t sh);
    int16_t setPacketParamsLoRa(uint16_t preambleLen, uint8_t hdrType, uint8_t payloadLen, uint8_t crcType, uint8_t invertIQ);
    int16_t setPacketParamsGFSK(uint16_t preambleLen, uint8_t preambleDetectorLen, uint8_t syncWordLen, uint8_t addrCmp, uint8_t packType, uint8_t payloadLen, uint8_t crcType, uint8_t whiten);
    int16_t setPacketParamsSigfox(uint8_t payloadLen, uint16_t rampUpDelay, uint16_t rampDownDelay, uint16_t bitNum);
    int16_t setTxParams(int8_t pwr, uint8_t ramp);
    int16_t setPacketAdrs(uint8_t node, uint8_t broadcast);
    int16_t setRxTxFallbackMode(uint8_t mode);
    int16_t setRxDutyCycle(uint32_t rxPeriod, uint32_t sleepPeriod, uint8_t mode);
    int16_t setPaConfig(uint8_t paSel, uint8_t regPaSupply, uint8_t paDutyCycle, uint8_t paHpSel);
    int16_t stopTimeoutOnPreamble(bool stop);
    int16_t setCad(void);
    int16_t setTxCw(void);
    int16_t setTxInfinitePreamble(void);
    int16_t setLoRaSynchTimeout(uint8_t symbolNum);
    int16_t setRangingAddr(uint32_t addr, uint8_t checkLen);
    int16_t setRangingReqAddr(uint32_t addr);
    int16_t getRangingResult(uint8_t type, float* res);
    int16_t setRangingTxRxDelay(uint32_t delay);
    int16_t setGfskCrcParams(uint32_t init, uint32_t poly);
    int16_t setGfskWhitParams(uint16_t seed);
    int16_t setRangingParameter(uint8_t symbolNum);
    int16_t setRssiCalibration(const int8_t* tune, int16_t gainOffset);
    int16_t setLoRaSyncWord(uint8_t sync);
    int16_t lrFhssBuildFrame(uint8_t hdrCount, uint8_t cr, uint8_t grid, bool hop, uint8_t bw, uint16_t hopSeq, int8_t devOffset, uint8_t* payload, size_t len);
    int16_t lrFhssSetSyncWord(uint32_t sync);
    int16_t configBleBeacon(uint8_t chan, uint8_t* payload, size_t len);
    int16_t getLoRaRxHeaderInfos(uint8_t* info);
    int16_t bleBeaconSend(uint8_t chan, uint8_t* payload, size_t len);
 
    int16_t wifiScan(uint8_t type, uint16_t mask, uint8_t acqMode, uint8_t nbMaxRes, uint8_t nbScanPerChan, uint16_t timeout, uint8_t abortOnTimeout);
    int16_t wifiScanTimeLimit(uint8_t type, uint16_t mask, uint8_t acqMode, uint8_t nbMaxRes, uint16_t timePerChan, uint16_t timeout);
    int16_t wifiCountryCode(uint16_t mask, uint8_t nbMaxRes, uint8_t nbScanPerChan, uint16_t timeout, uint8_t abortOnTimeout);
    int16_t wifiCountryCodeTimeLimit(uint16_t mask, uint8_t nbMaxRes, uint16_t timePerChan, uint16_t timeout);
    int16_t wifiGetNbResults(uint8_t* nbResults);
    int16_t wifiReadResults(uint8_t index, uint8_t nbResults, uint8_t format, uint8_t* results);
    int16_t wifiResetCumulTimings(void);
    int16_t wifiReadCumulTimings(uint32_t* detection, uint32_t* capture, uint32_t* demodulation);
    int16_t wifiGetNbCountryCodeResults(uint8_t* nbResults);
    int16_t wifiReadCountryCodeResults(uint8_t index, uint8_t nbResults, uint8_t* results);
    int16_t wifiCfgTimestampAPphone(uint32_t timestamp);
    int16_t wifiReadVersion(uint8_t* major, uint8_t* minor);
 
    int16_t gnssReadRssi(int8_t* rssi);
    int16_t gnssSetConstellationToUse(uint8_t mask);
    int16_t gnssReadConstellationToUse(uint8_t* mask);
    int16_t gnssSetAlmanacUpdate(uint8_t mask);
    int16_t gnssReadAlmanacUpdate(uint8_t* mask);
    int16_t gnssSetFreqSearchSpace(uint8_t freq);
    int16_t gnssReadFreqSearchSpace(uint8_t* freq);
    int16_t gnssReadVersion(uint8_t* fw, uint8_t* almanac);
    int16_t gnssReadSupportedConstellations(uint8_t* mask);
    int16_t gnssSetMode(uint8_t mode);
    int16_t gnssAutonomous(uint32_t gpsTime, uint8_t resMask, uint8_t nbSvMask);
    int16_t gnssAssisted(uint32_t gpsTime, uint8_t effort, uint8_t resMask, uint8_t nbSvMask);
    int16_t gnssSetAssistancePosition(float lat, float lon);
    int16_t gnssReadAssistancePosition(float* lat, float* lon);
    int16_t gnssPushSolverMsg(uint8_t* payload, size_t len);
    int16_t gnssPushDmMsg(uint8_t* payload, size_t len);
    int16_t gnssGetContextStatus(uint8_t* fwVersion, uint32_t* almanacCrc, uint8_t* errCode, uint8_t* almUpdMask, uint8_t* freqSpace);
    int16_t gnssGetNbSvDetected(uint8_t* nbSv);
    int16_t gnssGetSvDetected(uint8_t* svId, uint8_t* snr, int16_t* doppler, size_t nbSv);
    int16_t gnssGetConsumption(uint32_t* cpu, uint32_t* radio);
    int16_t gnssGetResultSize(uint16_t* size);
    int16_t gnssReadResults(uint8_t* result, uint16_t size);
    int16_t gnssAlmanacFullUpdateHeader(uint16_t date, uint32_t globalCrc);
    int16_t gnssAlmanacFullUpdateSV(uint8_t svn, uint8_t* svnAlmanac);
    int16_t gnssAlmanacReadAddrSize(uint32_t* addr, uint16_t* size);
    int16_t gnssAlmanacReadSV(uint8_t svId, uint8_t* almanac);
    int16_t gnssGetNbSvVisible(uint32_t time, float lat, float lon, uint8_t constellation, uint8_t* nbSv);
    int16_t gnssGetSvVisible(uint8_t nbSv, uint8_t** svId, int16_t** doppler, int16_t** dopplerErr);
    int16_t gnssPerformScan(uint8_t effort, uint8_t resMask, uint8_t nbSvMax);
    int16_t gnssReadLastScanModeLaunched(uint8_t* lastScanMode);
    int16_t gnssFetchTime(uint8_t effort, uint8_t opt);
    int16_t gnssReadTime(uint8_t* err, uint32_t* time, uint32_t* nbUs, uint32_t* timeAccuracy);
    int16_t gnssResetTime(void);
    int16_t gnssResetPosition(void);
    int16_t gnssReadWeekNumberRollover(uint8_t* status, uint8_t* rollover);
    int16_t gnssReadDemodStatus(int8_t* status, uint8_t* info);
    int16_t gnssReadCumulTiming(uint32_t* timing, uint8_t* constDemod);
    int16_t gnssSetTime(uint32_t time, uint16_t accuracy);
    int16_t gnssReadDopplerSolverRes(uint8_t* error, uint8_t* nbSvUsed, float* lat, float* lon, uint16_t* accuracy, uint16_t* xtal, float* latFilt, float* lonFilt, uint16_t* accuracyFilt, uint16_t* xtalFilt);
    int16_t gnssReadDelayResetAP(uint32_t* delay);
    int16_t gnssAlmanacUpdateFromSat(uint8_t effort, uint8_t bitMask);
    int16_t gnssReadAlmanacStatus(uint8_t* status);
    int16_t gnssReadKeepSyncStatus(uint8_t mask, uint8_t* nbSvVisible, uint32_t* elapsed);
    int16_t gnssConfigAlmanacUpdatePeriod(uint8_t bitMask, uint8_t svType, uint16_t period);
    int16_t gnssReadAlmanacUpdatePeriod(uint8_t bitMask, uint8_t svType, uint16_t* period);
    int16_t gnssConfigDelayResetAP(uint32_t delay);
    int16_t gnssGetSvWarmStart(uint8_t bitMask, uint8_t* sv, uint8_t nbVisSat);
    int16_t gnssReadWarmStartStatus(uint8_t bitMask, uint8_t* nbVisSat, uint32_t* timeElapsed);
    int16_t gnssGetSvSync(uint8_t mask, uint8_t nbSv, uint8_t* syncList);
    int16_t gnssWriteBitMaskSatActivated(uint8_t bitMask, uint32_t* bitMaskActivated0, uint32_t* bitMaskActivated1);
 
    int16_t cryptoSetKey(uint8_t keyId, uint8_t* key);
    int16_t cryptoDeriveKey(uint8_t srcKeyId, uint8_t dstKeyId, uint8_t* key);
    int16_t cryptoProcessJoinAccept(uint8_t decKeyId, uint8_t verKeyId, uint8_t lwVer, uint8_t* header, uint8_t* dataIn, size_t len, uint8_t* dataOut);
    int16_t cryptoComputeAesCmac(uint8_t keyId, uint8_t* data, size_t len, uint32_t* mic);
    int16_t cryptoVerifyAesCmac(uint8_t keyId, uint32_t micExp, uint8_t* data, size_t len, bool* result);
    int16_t cryptoAesEncrypt01(uint8_t keyId, uint8_t* dataIn, size_t len, uint8_t* dataOut);
    int16_t cryptoAesEncrypt(uint8_t keyId, uint8_t* dataIn, size_t len, uint8_t* dataOut);
    int16_t cryptoAesDecrypt(uint8_t keyId, uint8_t* dataIn, size_t len, uint8_t* dataOut);
    int16_t cryptoStoreToFlash(void);
    int16_t cryptoRestoreFromFlash(void);
    int16_t cryptoSetParam(uint8_t id, uint32_t value);
    int16_t cryptoGetParam(uint8_t id, uint32_t* value);
    int16_t cryptoCheckEncryptedFirmwareImage(uint32_t offset, uint32_t* data, size_t len, bool nonvolatile);
    int16_t cryptoCheckEncryptedFirmwareImageResult(bool* result);
 
    int16_t bootEraseFlash(void);
    int16_t bootWriteFlashEncrypted(uint32_t offset, uint32_t* data, size_t len, bool nonvolatile);
    int16_t bootReboot(bool stay);
    int16_t bootGetPin(uint8_t* pin);
    int16_t bootGetChipEui(uint8_t* eui);
    int16_t bootGetJoinEui(uint8_t* eui);
    
    int16_t SPIcommand(uint16_t cmd, bool write, uint8_t* data, size_t len, uint8_t* out = NULL, size_t outLen = 0);
    
#if !RADIOLIB_GODMODE
  protected:
#endif
    uint8_t chipType = 0;
 
#if !RADIOLIB_GODMODE
  private:
#endif
    Module* mod;
 
    // cached LoRa parameters
    uint8_t bandwidth = 0, spreadingFactor = 0, codingRate = 0, ldrOptimize = 0, crcTypeLoRa = 0, headerType = 0;
    uint16_t preambleLengthLoRa = 0;
    float bandwidthKhz = 0;
    bool ldroAuto = true;
    size_t implicitLen = 0;
    bool invertIQEnabled = false;
 
    // cached GFSK parameters
    uint32_t bitRate = 0, frequencyDev = 0;
    uint8_t preambleDetLength = 0, rxBandwidth = 0, pulseShape = 0, crcTypeGFSK = 0, syncWordLength = 0, addrComp = 0, whitening = 0, packetType = 0, node = 0;
    uint16_t preambleLengthGFSK = 0;
 
    // cached LR-FHSS parameters
    uint8_t lrFhssCr = 0, lrFhssBw = 0, lrFhssHdrCount = 0;
    uint16_t lrFhssHopSeq = 0;
 
    float dataRateMeasured = 0;
 
    uint8_t wifiScanMode = 0;
 
    int16_t modSetup(float tcxoVoltage, uint8_t modem);
    static int16_t SPIparseStatus(uint8_t in);
    static int16_t SPIcheckStatus(Module* mod);
    bool findChip(uint8_t ver);
    int16_t config(uint8_t modem);
    int16_t setPacketMode(uint8_t mode, uint8_t len);
    int16_t startCad(uint8_t symbolNum, uint8_t detPeak, uint8_t detMin, uint8_t exitMode, RadioLibTime_t timeout);
    int16_t setHeaderType(uint8_t hdrType, size_t len = 0xFF);
 
    // common methods to avoid some copy-paste
    int16_t bleBeaconCommon(uint16_t cmd, uint8_t chan, uint8_t* payload, size_t len);
    int16_t writeCommon(uint16_t cmd, uint32_t addrOffset, const uint32_t* data, size_t len, bool nonvolatile);
    int16_t cryptoCommon(uint16_t cmd, uint8_t keyId, uint8_t* dataIn, size_t len, uint8_t* dataOut);
};
 
#endif
 
#endif