nRF24.h

#if !defined(_RADIOLIB_NRF24_H) && !defined(RADIOLIB_EXCLUDE_NRF24)
#define _RADIOLIB_NRF24_H
 
#include "../../Module.h"
#include "../../TypeDef.h"
 
#include "../../protocols/PhysicalLayer/PhysicalLayer.h"
 
// nRF24 physical layer properties
#define RADIOLIB_NRF24_FREQUENCY_STEP_SIZE                     1000000.0
#define RADIOLIB_NRF24_MAX_PACKET_LENGTH                       32
 
// nRF24 SPI commands
#define RADIOLIB_NRF24_CMD_READ                                0b00000000
#define RADIOLIB_NRF24_CMD_WRITE                               0b00100000
#define RADIOLIB_NRF24_CMD_READ_RX_PAYLOAD                     0b01100001
#define RADIOLIB_NRF24_CMD_WRITE_TX_PAYLOAD                    0b10100000
#define RADIOLIB_NRF24_CMD_FLUSH_TX                            0b11100001
#define RADIOLIB_NRF24_CMD_FLUSH_RX                            0b11100010
#define RADIOLIB_NRF24_CMD_REUSE_TX_PAXLOAD                    0b11100011
#define RADIOLIB_NRF24_CMD_READ_RX_PAYLOAD_WIDTH               0b01100000
#define RADIOLIB_NRF24_CMD_WRITE_ACK_PAYLOAD                   0b10101000
#define RADIOLIB_NRF24_CMD_WRITE_TX_PAYLOAD_NOACK              0b10110000
#define RADIOLIB_NRF24_CMD_NOP                                 0b11111111
 
// nRF24 register map
#define RADIOLIB_NRF24_REG_CONFIG                              0x00
#define RADIOLIB_NRF24_REG_EN_AA                               0x01
#define RADIOLIB_NRF24_REG_EN_RXADDR                           0x02
#define RADIOLIB_NRF24_REG_SETUP_AW                            0x03
#define RADIOLIB_NRF24_REG_SETUP_RETR                          0x04
#define RADIOLIB_NRF24_REG_RF_CH                               0x05
#define RADIOLIB_NRF24_REG_RF_SETUP                            0x06
#define RADIOLIB_NRF24_REG_STATUS                              0x07
#define RADIOLIB_NRF24_REG_OBSERVE_TX                          0x08
#define RADIOLIB_NRF24_REG_RPD                                 0x09
#define RADIOLIB_NRF24_REG_RX_ADDR_P0                          0x0A
#define RADIOLIB_NRF24_REG_RX_ADDR_P1                          0x0B
#define RADIOLIB_NRF24_REG_RX_ADDR_P2                          0x0C
#define RADIOLIB_NRF24_REG_RX_ADDR_P3                          0x0D
#define RADIOLIB_NRF24_REG_RX_ADDR_P4                          0x0E
#define RADIOLIB_NRF24_REG_RX_ADDR_P5                          0x0F
#define RADIOLIB_NRF24_REG_TX_ADDR                             0x10
#define RADIOLIB_NRF24_REG_RX_PW_P0                            0x11
#define RADIOLIB_NRF24_REG_RX_PW_P1                            0x12
#define RADIOLIB_NRF24_REG_RX_PW_P2                            0x13
#define RADIOLIB_NRF24_REG_RX_PW_P3                            0x14
#define RADIOLIB_NRF24_REG_RX_PW_P4                            0x15
#define RADIOLIB_NRF24_REG_RX_PW_P5                            0x16
#define RADIOLIB_NRF24_REG_FIFO_STATUS                         0x17
#define RADIOLIB_NRF24_REG_DYNPD                               0x1C
#define RADIOLIB_NRF24_REG_FEATURE                             0x1D
 
// NRF24_REG_CONFIG                                                   MSB   LSB   DESCRIPTION
#define RADIOLIB_NRF24_MASK_RX_DR_IRQ_OFF                      0b01000000  //  6     6     RX_DR will not be reflected on IRQ pin
#define RADIOLIB_NRF24_MASK_RX_DR_IRQ_ON                       0b00000000  //  6     6     RX_DR will be reflected on IRQ pin as active low (default)
#define RADIOLIB_NRF24_MASK_TX_DS_IRQ_OFF                      0b00100000  //  5     5     TX_DS will not be reflected on IRQ pin
#define RADIOLIB_NRF24_MASK_TX_DS_IRQ_ON                       0b00000000  //  5     5     TX_DS will be reflected on IRQ pin as active low (default)
#define RADIOLIB_NRF24_MASK_MAX_RT_IRQ_OFF                     0b00010000  //  4     4     MAX_RT will not be reflected on IRQ pin
#define RADIOLIB_NRF24_MASK_MAX_RT_IRQ_ON                      0b00000000  //  4     4     MAX_RT will be reflected on IRQ pin as active low (default)
#define RADIOLIB_NRF24_CRC_OFF                                 0b00000000  //  3     3     CRC calculation: disabled
#define RADIOLIB_NRF24_CRC_ON                                  0b00001000  //  3     3                      enabled (default)
#define RADIOLIB_NRF24_CRC_8                                   0b00000000  //  2     2     CRC scheme: CRC8 (default)
#define RADIOLIB_NRF24_CRC_16                                  0b00000100  //  2     2                 CRC16
#define RADIOLIB_NRF24_POWER_UP                                0b00000010  //  1     1     power up
#define RADIOLIB_NRF24_POWER_DOWN                              0b00000000  //  1     1     power down
#define RADIOLIB_NRF24_PTX                                     0b00000000  //  0     0     enable primary Tx
#define RADIOLIB_NRF24_PRX                                     0b00000001  //  0     0     enable primary Rx
 
// NRF24_REG_EN_AA
#define RADIOLIB_NRF24_AA_ALL_OFF                              0b00000000  //  5     0     auto-ACK on all pipes: disabled
#define RADIOLIB_NRF24_AA_ALL_ON                               0b00111111  //  5     0                         enabled (default)
#define RADIOLIB_NRF24_AA_P5_OFF                               0b00000000  //  5     5     auto-ACK on pipe 5: disabled
#define RADIOLIB_NRF24_AA_P5_ON                                0b00100000  //  5     5                         enabled (default)
#define RADIOLIB_NRF24_AA_P4_OFF                               0b00000000  //  4     4     auto-ACK on pipe 4: disabled
#define RADIOLIB_NRF24_AA_P4_ON                                0b00010000  //  4     4                         enabled (default)
#define RADIOLIB_NRF24_AA_P3_OFF                               0b00000000  //  3     3     auto-ACK on pipe 3: disabled
#define RADIOLIB_NRF24_AA_P3_ON                                0b00001000  //  3     3                         enabled (default)
#define RADIOLIB_NRF24_AA_P2_OFF                               0b00000000  //  2     2     auto-ACK on pipe 2: disabled
#define RADIOLIB_NRF24_AA_P2_ON                                0b00000100  //  2     2                         enabled (default)
#define RADIOLIB_NRF24_AA_P1_OFF                               0b00000000  //  1     1     auto-ACK on pipe 1: disabled
#define RADIOLIB_NRF24_AA_P1_ON                                0b00000010  //  1     1                         enabled (default)
#define RADIOLIB_NRF24_AA_P0_OFF                               0b00000000  //  0     0     auto-ACK on pipe 0: disabled
#define RADIOLIB_NRF24_AA_P0_ON                                0b00000001  //  0     0                         enabled (default)
 
// NRF24_REG_EN_RXADDR
#define RADIOLIB_NRF24_P5_OFF                                  0b00000000  //  5     5     receive pipe 5: disabled (default)
#define RADIOLIB_NRF24_P5_ON                                   0b00100000  //  5     5                     enabled
#define RADIOLIB_NRF24_P4_OFF                                  0b00000000  //  4     4     receive pipe 4: disabled (default)
#define RADIOLIB_NRF24_P4_ON                                   0b00010000  //  4     4                     enabled
#define RADIOLIB_NRF24_P3_OFF                                  0b00000000  //  3     3     receive pipe 3: disabled (default)
#define RADIOLIB_NRF24_P3_ON                                   0b00001000  //  3     3                     enabled
#define RADIOLIB_NRF24_P2_OFF                                  0b00000000  //  2     2     receive pipe 2: disabled (default)
#define RADIOLIB_NRF24_P2_ON                                   0b00000100  //  2     2                     enabled
#define RADIOLIB_NRF24_P1_OFF                                  0b00000000  //  1     1     receive pipe 1: disabled
#define RADIOLIB_NRF24_P1_ON                                   0b00000010  //  1     1                     enabled (default)
#define RADIOLIB_NRF24_P0_OFF                                  0b00000000  //  0     0     receive pipe 0: disabled
#define RADIOLIB_NRF24_P0_ON                                   0b00000001  //  0     0                     enabled (default)
 
// NRF24_REG_SETUP_AW
#define RADIOLIB_NRF24_ADDRESS_2_BYTES                         0b00000000  //  1     0     address width: 2 bytes
#define RADIOLIB_NRF24_ADDRESS_3_BYTES                         0b00000001  //  1     0                    3 bytes
#define RADIOLIB_NRF24_ADDRESS_4_BYTES                         0b00000010  //  1     0                    4 bytes
#define RADIOLIB_NRF24_ADDRESS_5_BYTES                         0b00000011  //  1     0                    5 bytes (default)
 
// NRF24_REG_SETUP_RETR
#define RADIOLIB_NRF24_ARD                                     0b00000000  //  7     4     auto retransmit delay: t[us] = (NRF24_ARD + 1) * 250 us
#define RADIOLIB_NRF24_ARC_OFF                                 0b00000000  //  3     0     auto retransmit count: auto retransmit disabled
#define RADIOLIB_NRF24_ARC                                     0b00000011  //  3     0                            up to 3 retransmits on AA fail (default)
 
// NRF24_REG_RF_CH
#define RADIOLIB_NRF24_RF_CH                                   0b00000010  //  6     0     RF channel: f_CH[MHz] = 2400 MHz + NRF24_RF_CH
 
// NRF24_REG_RF_SETUP
#define RADIOLIB_NRF24_CONT_WAVE_OFF                           0b00000000  //  7     7     continuous carrier transmit: disabled (default)
#define RADIOLIB_NRF24_CONT_WAVE_ON                            0b10000000  //  7     7                                  enabled
#define RADIOLIB_NRF24_DR_250_KBPS                             0b00100000  //  5     5     data rate: 250 kbps
#define RADIOLIB_NRF24_DR_1_MBPS                               0b00000000  //  3     3                1 Mbps (default)
#define RADIOLIB_NRF24_DR_2_MBPS                               0b00001000  //  3     3                2 Mbps
#define RADIOLIB_NRF24_PLL_LOCK_ON                             0b00010000  //  4     4     force PLL lock: enabled
#define RADIOLIB_NRF24_PLL_LOCK_OFF                            0b00000000  //  4     4                     disabled (default)
#define RADIOLIB_NRF24_RF_PWR_18_DBM                           0b00000000  //  2     1     output power: -18 dBm
#define RADIOLIB_NRF24_RF_PWR_12_DBM                           0b00000010  //  2     1                   -12 dBm
#define RADIOLIB_NRF24_RF_PWR_6_DBM                            0b00000100  //  2     1                   -6 dBm
#define RADIOLIB_NRF24_RF_PWR_0_DBM                            0b00000110  //  2     1                   0 dBm (default)
 
// NRF24_REG_STATUS
#define RADIOLIB_NRF24_RX_DR                                   0b01000000  //  6     6     Rx data ready
#define RADIOLIB_NRF24_TX_DS                                   0b00100000  //  5     5     Tx data sent
#define RADIOLIB_NRF24_MAX_RT                                  0b00010000  //  4     4     maximum number of retransmits reached (must be cleared to continue)
#define RADIOLIB_NRF24_RX_FIFO_EMPTY                           0b00001110  //  3     1     Rx FIFO is empty
#define RADIOLIB_NRF24_RX_P_NO                                 0b00000000  //  3     1     number of data pipe that received data
#define RADIOLIB_NRF24_TX_FIFO_FULL                            0b00000001  //  0     0     Tx FIFO is full
 
// NRF24_REG_OBSERVE_TX
#define RADIOLIB_NRF24_PLOS_CNT                                0b00000000  //  7     4     number of lost packets
#define RADIOLIB_NRF24_ARC_CNT                                 0b00000000  //  3     0     number of retransmitted packets
 
// NRF24_REG_RPD
#define RADIOLIB_NRF24_RP_BELOW_64_DBM                         0b00000000  //  0     0     received power in the current channel: less than -64 dBm
#define RADIOLIB_NRF24_RP_ABOVE_64_DBM                         0b00000001  //  0     0                                            more than -64 dBm
 
// NRF24_REG_FIFO_STATUS
#define RADIOLIB_NRF24_TX_REUSE                                0b01000000  //  6     6     reusing last transmitted payload
#define RADIOLIB_NRF24_TX_FIFO_FULL_FLAG                       0b00100000  //  5     5     Tx FIFO is full
#define RADIOLIB_NRF24_TX_FIFO_EMPTY_FLAG                      0b00010000  //  4     4     Tx FIFO is empty
#define RADIOLIB_NRF24_RX_FIFO_FULL_FLAG                       0b00000010  //  1     1     Rx FIFO is full
#define RADIOLIB_NRF24_RX_FIFO_EMPTY_FLAG                      0b00000001  //  0     0     Rx FIFO is empty
 
// NRF24_REG_DYNPD
#define RADIOLIB_NRF24_DPL_P5_OFF                              0b00000000  //  5     5     dynamic payload length on pipe 5: disabled (default)
#define RADIOLIB_NRF24_DPL_P5_ON                               0b00100000  //  5     5                                       enabled
#define RADIOLIB_NRF24_DPL_P4_OFF                              0b00000000  //  4     4     dynamic payload length on pipe 4: disabled (default)
#define RADIOLIB_NRF24_DPL_P4_ON                               0b00010000  //  4     4                                       enabled
#define RADIOLIB_NRF24_DPL_P3_OFF                              0b00000000  //  3     3     dynamic payload length on pipe 3: disabled (default)
#define RADIOLIB_NRF24_DPL_P3_ON                               0b00001000  //  3     3                                       enabled
#define RADIOLIB_NRF24_DPL_P2_OFF                              0b00000000  //  2     2     dynamic payload length on pipe 2: disabled (default)
#define RADIOLIB_NRF24_DPL_P2_ON                               0b00000100  //  2     2                                       enabled
#define RADIOLIB_NRF24_DPL_P1_OFF                              0b00000000  //  1     1     dynamic payload length on pipe 1: disabled (default)
#define RADIOLIB_NRF24_DPL_P1_ON                               0b00000010  //  1     1                                       enabled
#define RADIOLIB_NRF24_DPL_P0_OFF                              0b00000000  //  0     0     dynamic payload length on pipe 0: disabled (default)
#define RADIOLIB_NRF24_DPL_P0_ON                               0b00000001  //  0     0                                       enabled
#define RADIOLIB_NRF24_DPL_ALL_OFF                             0b00000000  //  5     0     disable all dynamic payloads
#define RADIOLIB_NRF24_DPL_ALL_ON                              0b00111111  //  5     0     enable all dynamic payloads
 
// NRF24_REG_FEATURE
#define RADIOLIB_NRF24_DPL_OFF                                 0b00000000  //  2     2     dynamic payload length: disabled (default)
#define RADIOLIB_NRF24_DPL_ON                                  0b00000100  //  2     2                             enabled
#define RADIOLIB_NRF24_ACK_PAY_OFF                             0b00000000  //  1     1     payload with ACK packets: disabled (default)
#define RADIOLIB_NRF24_ACK_PAY_ON                              0b00000010  //  1     1                               enabled
#define RADIOLIB_NRF24_DYN_ACK_OFF                             0b00000000  //  0     0     payloads without ACK: disabled (default)
#define RADIOLIB_NRF24_DYN_ACK_ON                              0b00000001  //  0     0                           enabled
 
class nRF24: public PhysicalLayer {
  public:
    // introduce PhysicalLayer overloads
    using PhysicalLayer::transmit;
    using PhysicalLayer::receive;
    using PhysicalLayer::startTransmit;
    using PhysicalLayer::readData;
 
    nRF24(Module* mod);
 
    Module* getMod();
 
    // basic methods
 
    int16_t begin(int16_t freq = 2400, int16_t dataRate = 1000, int8_t power = -12, uint8_t addrWidth = 5);
 
    int16_t sleep();
 
    int16_t standby() override;
 
    int16_t transmit(uint8_t* data, size_t len, uint8_t addr) override;
 
    int16_t receive(uint8_t* data, size_t len) override;
 
    int16_t transmitDirect(uint32_t frf = 0) override;
 
    int16_t receiveDirect() override;
 
    // interrupt methods
 
    void setIrqAction(void (*func)(void));
 
    int16_t startTransmit(uint8_t* data, size_t len, uint8_t addr) override;
 
    int16_t finishTransmit() override;
 
    int16_t startReceive();
 
    int16_t readData(uint8_t* data, size_t len) override;
 
    // configuration methods
 
    int16_t setFrequency(float freq);
 
    int16_t setBitRate(float br);
 
    int16_t setOutputPower(int8_t power);
 
    int16_t setAddressWidth(uint8_t addrWidth);
 
    int16_t setTransmitPipe(uint8_t* addr);
 
    int16_t setReceivePipe(uint8_t pipeNum, uint8_t* addr);
 
    int16_t setReceivePipe(uint8_t pipeNum, uint8_t addrByte);
 
    int16_t disablePipe(uint8_t pipeNum);
 
    int16_t getStatus(uint8_t mask = 0xFF);
 
    bool isCarrierDetected();
 
    int16_t setFrequencyDeviation(float freqDev) override;
 
    size_t getPacketLength(bool update = true) override;
 
    int16_t setCrcFiltering(bool crcOn = true);
 
    int16_t setAutoAck(bool autoAckOn = true);
 
    int16_t setAutoAck(uint8_t pipeNum, bool autoAckOn);
 
    int16_t setDataShaping(uint8_t sh) override;
 
    int16_t setEncoding(uint8_t encoding) override;
 
    uint8_t randomByte();
 
    #if !defined(RADIOLIB_EXCLUDE_DIRECT_RECEIVE)
 
    void setDirectAction(void (*func)(void));
 
    void readBit(RADIOLIB_PIN_TYPE pin);
    #endif
 
#if !defined(RADIOLIB_GODMODE) && !defined(RADIOLIB_LOW_LEVEL)
  protected:
#endif
    Module* _mod;
 
    void SPIreadRxPayload(uint8_t* data, uint8_t numBytes);
    void SPIwriteTxPayload(uint8_t* data, uint8_t numBytes);
    void SPItransfer(uint8_t cmd, bool write = false, uint8_t* dataOut = NULL, uint8_t* dataIn = NULL, uint8_t numBytes = 0);
 
#if !defined(RADIOLIB_GODMODE)
  protected:
#endif
 
    uint8_t _addrWidth = 0;
 
    int16_t config();
    void clearIRQ();
};
 
#endif