SX126x.h

#if !defined(_RADIOLIB_SX126X_H)
#define _RADIOLIB_SX126X_H
 
#include "../../TypeDef.h"
 
#if !defined(RADIOLIB_EXCLUDE_SX126X)
 
#include "../../Module.h"
 
#include "../../protocols/PhysicalLayer/PhysicalLayer.h"
 
// SX126X physical layer properties
#define RADIOLIB_SX126X_FREQUENCY_STEP_SIZE                    0.9536743164
#define RADIOLIB_SX126X_MAX_PACKET_LENGTH                      255
#define RADIOLIB_SX126X_CRYSTAL_FREQ                           32.0
#define RADIOLIB_SX126X_DIV_EXPONENT                           25
 
// SX126X SPI commands
// operational modes commands
#define RADIOLIB_SX126X_CMD_NOP                                0x00
#define RADIOLIB_SX126X_CMD_SET_SLEEP                          0x84
#define RADIOLIB_SX126X_CMD_SET_STANDBY                        0x80
#define RADIOLIB_SX126X_CMD_SET_FS                             0xC1
#define RADIOLIB_SX126X_CMD_SET_TX                             0x83
#define RADIOLIB_SX126X_CMD_SET_RX                             0x82
#define RADIOLIB_SX126X_CMD_STOP_TIMER_ON_PREAMBLE             0x9F
#define RADIOLIB_SX126X_CMD_SET_RX_DUTY_CYCLE                  0x94
#define RADIOLIB_SX126X_CMD_SET_CAD                            0xC5
#define RADIOLIB_SX126X_CMD_SET_TX_CONTINUOUS_WAVE             0xD1
#define RADIOLIB_SX126X_CMD_SET_TX_INFINITE_PREAMBLE           0xD2
#define RADIOLIB_SX126X_CMD_SET_REGULATOR_MODE                 0x96
#define RADIOLIB_SX126X_CMD_CALIBRATE                          0x89
#define RADIOLIB_SX126X_CMD_CALIBRATE_IMAGE                    0x98
#define RADIOLIB_SX126X_CMD_SET_PA_CONFIG                      0x95
#define RADIOLIB_SX126X_CMD_SET_RX_TX_FALLBACK_MODE            0x93
 
// register and buffer access commands
#define RADIOLIB_SX126X_CMD_WRITE_REGISTER                     0x0D
#define RADIOLIB_SX126X_CMD_READ_REGISTER                      0x1D
#define RADIOLIB_SX126X_CMD_WRITE_BUFFER                       0x0E
#define RADIOLIB_SX126X_CMD_READ_BUFFER                        0x1E
 
// DIO and IRQ control
#define RADIOLIB_SX126X_CMD_SET_DIO_IRQ_PARAMS                 0x08
#define RADIOLIB_SX126X_CMD_GET_IRQ_STATUS                     0x12
#define RADIOLIB_SX126X_CMD_CLEAR_IRQ_STATUS                   0x02
#define RADIOLIB_SX126X_CMD_SET_DIO2_AS_RF_SWITCH_CTRL         0x9D
#define RADIOLIB_SX126X_CMD_SET_DIO3_AS_TCXO_CTRL              0x97
 
// RF, modulation and packet commands
#define RADIOLIB_SX126X_CMD_SET_RF_FREQUENCY                   0x86
#define RADIOLIB_SX126X_CMD_SET_PACKET_TYPE                    0x8A
#define RADIOLIB_SX126X_CMD_GET_PACKET_TYPE                    0x11
#define RADIOLIB_SX126X_CMD_SET_TX_PARAMS                      0x8E
#define RADIOLIB_SX126X_CMD_SET_MODULATION_PARAMS              0x8B
#define RADIOLIB_SX126X_CMD_SET_PACKET_PARAMS                  0x8C
#define RADIOLIB_SX126X_CMD_SET_CAD_PARAMS                     0x88
#define RADIOLIB_SX126X_CMD_SET_BUFFER_BASE_ADDRESS            0x8F
#define RADIOLIB_SX126X_CMD_SET_LORA_SYMB_NUM_TIMEOUT          0x0A
 
// status commands
#define RADIOLIB_SX126X_CMD_GET_STATUS                         0xC0
#define RADIOLIB_SX126X_CMD_GET_RSSI_INST                      0x15
#define RADIOLIB_SX126X_CMD_GET_RX_BUFFER_STATUS               0x13
#define RADIOLIB_SX126X_CMD_GET_PACKET_STATUS                  0x14
#define RADIOLIB_SX126X_CMD_GET_DEVICE_ERRORS                  0x17
#define RADIOLIB_SX126X_CMD_CLEAR_DEVICE_ERRORS                0x07
#define RADIOLIB_SX126X_CMD_GET_STATS                          0x10
#define RADIOLIB_SX126X_CMD_RESET_STATS                        0x00
 
 
// SX126X register map
#define RADIOLIB_SX126X_REG_HOPPING_ENABLE                     0x0385
#define RADIOLIB_SX126X_REG_LR_FHSS_PACKET_LENGTH              0x0386
#define RADIOLIB_SX126X_REG_LR_FHSS_NUM_HOPPING_BLOCKS         0x0387
#define RADIOLIB_SX126X_REG_LR_FHSS_NUM_SYMBOLS_FREQX_MSB(X)   (0x0388 + (X)*6)
#define RADIOLIB_SX126X_REG_LR_FHSS_NUM_SYMBOLS_FREQX_LSB(X)   (0x0389 + (X)*6)
#define RADIOLIB_SX126X_REG_LR_FHSS_FREQX_0(X)                 (0x038A + (X)*6)
#define RADIOLIB_SX126X_REG_LR_FHSS_FREQX_1(X)                 (0x038B + (X)*6)
#define RADIOLIB_SX126X_REG_LR_FHSS_FREQX_2(X)                 (0x038C + (X)*6)
#define RADIOLIB_SX126X_REG_LR_FHSS_FREQX_3(X)                 (0x038D + (X)*6)
#define RADIOLIB_SX126X_REG_DIOX_OUT_ENABLE                    0x0580
#define RADIOLIB_SX126X_REG_DIOX_IN_ENABLE                     0x0583
#define RADIOLIB_SX126X_REG_DIOX_PULL_UP_CTRL                  0x0584
#define RADIOLIB_SX126X_REG_DIOX_PULL_DOWN_CTRL                0x0585
#define RADIOLIB_SX126X_REG_WHITENING_INITIAL_MSB              0x06B8
#define RADIOLIB_SX126X_REG_WHITENING_INITIAL_LSB              0x06B9
#define RADIOLIB_SX126X_REG_CRC_INITIAL_MSB                    0x06BC
#define RADIOLIB_SX126X_REG_CRC_INITIAL_LSB                    0x06BD
#define RADIOLIB_SX126X_REG_CRC_POLYNOMIAL_MSB                 0x06BE
#define RADIOLIB_SX126X_REG_CRC_POLYNOMIAL_LSB                 0x06BF
#define RADIOLIB_SX126X_REG_SYNC_WORD_0                        0x06C0
#define RADIOLIB_SX126X_REG_SYNC_WORD_1                        0x06C1
#define RADIOLIB_SX126X_REG_SYNC_WORD_2                        0x06C2
#define RADIOLIB_SX126X_REG_SYNC_WORD_3                        0x06C3
#define RADIOLIB_SX126X_REG_SYNC_WORD_4                        0x06C4
#define RADIOLIB_SX126X_REG_SYNC_WORD_5                        0x06C5
#define RADIOLIB_SX126X_REG_SYNC_WORD_6                        0x06C6
#define RADIOLIB_SX126X_REG_SYNC_WORD_7                        0x06C7
#define RADIOLIB_SX126X_REG_NODE_ADDRESS                       0x06CD
#define RADIOLIB_SX126X_REG_BROADCAST_ADDRESS                  0x06CE
#define RADIOLIB_SX126X_REG_IQ_CONFIG                          0x0736
#define RADIOLIB_SX126X_REG_LORA_SYNC_WORD_MSB                 0x0740
#define RADIOLIB_SX126X_REG_LORA_SYNC_WORD_LSB                 0x0741
#define RADIOLIB_SX126X_REG_RANDOM_NUMBER_0                    0x0819
#define RADIOLIB_SX126X_REG_RANDOM_NUMBER_1                    0x081A
#define RADIOLIB_SX126X_REG_RANDOM_NUMBER_2                    0x081B
#define RADIOLIB_SX126X_REG_RANDOM_NUMBER_3                    0x081C
#define RADIOLIB_SX126X_REG_RX_GAIN                            0x08AC
#define RADIOLIB_SX126X_REG_TX_CLAMP_CONFIG                    0x08D8
#define RADIOLIB_SX126X_REG_OCP_CONFIGURATION                  0x08E7
#define RADIOLIB_SX126X_REG_RTC_CTRL                           0x0902
#define RADIOLIB_SX126X_REG_XTA_TRIM                           0x0911
#define RADIOLIB_SX126X_REG_XTB_TRIM                           0x0912
#define RADIOLIB_SX126X_REG_DIO3_OUT_VOLTAGE_CTRL              0x0920
#define RADIOLIB_SX126X_REG_EVENT_MASK                         0x0944
 
// undocumented registers
#define RADIOLIB_SX126X_REG_SENSITIVITY_CONFIG                 0x0889 // SX1268 datasheet v1.1, section 15.1
#define RADIOLIB_SX126X_REG_RX_GAIN_RETENTION_0                0x029F // SX1268 datasheet v1.1, section 9.6
#define RADIOLIB_SX126X_REG_RX_GAIN_RETENTION_1                0x02A0 // SX1268 datasheet v1.1, section 9.6
#define RADIOLIB_SX126X_REG_RX_GAIN_RETENTION_2                0x02A1 // SX1268 datasheet v1.1, section 9.6
 
 
// SX126X SPI command variables
//RADIOLIB_SX126X_CMD_SET_SLEEP                                                MSB   LSB   DESCRIPTION
#define RADIOLIB_SX126X_SLEEP_START_COLD                       0b00000000  //  2     2     sleep mode: cold start, configuration is lost (default)
#define RADIOLIB_SX126X_SLEEP_START_WARM                       0b00000100  //  2     2                 warm start, configuration is retained
#define RADIOLIB_SX126X_SLEEP_RTC_OFF                          0b00000000  //  0     0     wake on RTC timeout: disabled
#define RADIOLIB_SX126X_SLEEP_RTC_ON                           0b00000001  //  0     0                          enabled
 
//RADIOLIB_SX126X_CMD_SET_STANDBY
#define RADIOLIB_SX126X_STANDBY_RC                             0x00        //  7     0     standby mode: 13 MHz RC oscillator
#define RADIOLIB_SX126X_STANDBY_XOSC                           0x01        //  7     0                   32 MHz crystal oscillator
 
//RADIOLIB_SX126X_CMD_SET_RX
#define RADIOLIB_SX126X_RX_TIMEOUT_NONE                        0x000000    //  23    0     Rx timeout duration: no timeout (Rx single mode)
#define RADIOLIB_SX126X_RX_TIMEOUT_INF                         0xFFFFFF    //  23    0                          infinite (Rx continuous mode)
 
//RADIOLIB_SX126X_CMD_SET_TX
#define RADIOLIB_SX126X_TX_TIMEOUT_NONE                        0x000000    //  23    0     Tx timeout duration: no timeout (Tx single mode)
 
//RADIOLIB_SX126X_CMD_STOP_TIMER_ON_PREAMBLE
#define RADIOLIB_SX126X_STOP_ON_PREAMBLE_OFF                   0x00        //  7     0     stop timer on: sync word or header (default)
#define RADIOLIB_SX126X_STOP_ON_PREAMBLE_ON                    0x01        //  7     0                    preamble detection
 
//RADIOLIB_SX126X_CMD_SET_REGULATOR_MODE
#define RADIOLIB_SX126X_REGULATOR_LDO                          0x00        //  7     0     set regulator mode: LDO (default)
#define RADIOLIB_SX126X_REGULATOR_DC_DC                        0x01        //  7     0                         DC-DC
 
//RADIOLIB_SX126X_CMD_CALIBRATE
#define RADIOLIB_SX126X_CALIBRATE_IMAGE_OFF                    0b00000000  //  6     6     image calibration: disabled
#define RADIOLIB_SX126X_CALIBRATE_IMAGE_ON                     0b01000000  //  6     6                        enabled
#define RADIOLIB_SX126X_CALIBRATE_ADC_BULK_P_OFF               0b00000000  //  5     5     ADC bulk P calibration: disabled
#define RADIOLIB_SX126X_CALIBRATE_ADC_BULK_P_ON                0b00100000  //  5     5                             enabled
#define RADIOLIB_SX126X_CALIBRATE_ADC_BULK_N_OFF               0b00000000  //  4     4     ADC bulk N calibration: disabled
#define RADIOLIB_SX126X_CALIBRATE_ADC_BULK_N_ON                0b00010000  //  4     4                             enabled
#define RADIOLIB_SX126X_CALIBRATE_ADC_PULSE_OFF                0b00000000  //  3     3     ADC pulse calibration: disabled
#define RADIOLIB_SX126X_CALIBRATE_ADC_PULSE_ON                 0b00001000  //  3     3                            enabled
#define RADIOLIB_SX126X_CALIBRATE_PLL_OFF                      0b00000000  //  2     2     PLL calibration: disabled
#define RADIOLIB_SX126X_CALIBRATE_PLL_ON                       0b00000100  //  2     2                      enabled
#define RADIOLIB_SX126X_CALIBRATE_RC13M_OFF                    0b00000000  //  1     1     13 MHz RC osc. calibration: disabled
#define RADIOLIB_SX126X_CALIBRATE_RC13M_ON                     0b00000010  //  1     1                                 enabled
#define RADIOLIB_SX126X_CALIBRATE_RC64K_OFF                    0b00000000  //  0     0     64 kHz RC osc. calibration: disabled
#define RADIOLIB_SX126X_CALIBRATE_RC64K_ON                     0b00000001  //  0     0                                 enabled
#define RADIOLIB_SX126X_CALIBRATE_ALL                          0b01111111  //  6     0     calibrate all blocks
 
//RADIOLIB_SX126X_CMD_CALIBRATE_IMAGE
#define RADIOLIB_SX126X_CAL_IMG_430_MHZ_1                      0x6B
#define RADIOLIB_SX126X_CAL_IMG_430_MHZ_2                      0x6F
#define RADIOLIB_SX126X_CAL_IMG_470_MHZ_1                      0x75
#define RADIOLIB_SX126X_CAL_IMG_470_MHZ_2                      0x81
#define RADIOLIB_SX126X_CAL_IMG_779_MHZ_1                      0xC1
#define RADIOLIB_SX126X_CAL_IMG_779_MHZ_2                      0xC5
#define RADIOLIB_SX126X_CAL_IMG_863_MHZ_1                      0xD7
#define RADIOLIB_SX126X_CAL_IMG_863_MHZ_2                      0xDB
#define RADIOLIB_SX126X_CAL_IMG_902_MHZ_1                      0xE1
#define RADIOLIB_SX126X_CAL_IMG_902_MHZ_2                      0xE9
 
//RADIOLIB_SX126X_CMD_SET_PA_CONFIG
#define RADIOLIB_SX126X_PA_CONFIG_HP_MAX                       0x07
#define RADIOLIB_SX126X_PA_CONFIG_PA_LUT                       0x01
#define RADIOLIB_SX126X_PA_CONFIG_SX1262_8                     0x00
 
//RADIOLIB_SX126X_CMD_SET_RX_TX_FALLBACK_MODE
#define RADIOLIB_SX126X_RX_TX_FALLBACK_MODE_FS                 0x40        //  7     0     after Rx/Tx go to: FS mode
#define RADIOLIB_SX126X_RX_TX_FALLBACK_MODE_STDBY_XOSC         0x30        //  7     0                        standby with crystal oscillator
#define RADIOLIB_SX126X_RX_TX_FALLBACK_MODE_STDBY_RC           0x20        //  7     0                        standby with RC oscillator (default)
 
//RADIOLIB_SX126X_CMD_SET_DIO_IRQ_PARAMS
#define RADIOLIB_SX126X_IRQ_LR_FHSS_HOP                      0b0100000000000000  //  14    14    PA ramped up during LR-FHSS hop
#define RADIOLIB_SX126X_IRQ_TIMEOUT                          0b0000001000000000  //  9     9     Rx or Tx timeout
#define RADIOLIB_SX126X_IRQ_CAD_DETECTED                     0b0000000100000000  //  8     8     channel activity detected
#define RADIOLIB_SX126X_IRQ_CAD_DONE                         0b0000000010000000  //  7     7     channel activity detection finished
#define RADIOLIB_SX126X_IRQ_CRC_ERR                          0b0000000001000000  //  6     6     wrong CRC received
#define RADIOLIB_SX126X_IRQ_HEADER_ERR                       0b0000000000100000  //  5     5     LoRa header CRC error
#define RADIOLIB_SX126X_IRQ_HEADER_VALID                     0b0000000000010000  //  4     4     valid LoRa header received
#define RADIOLIB_SX126X_IRQ_SYNC_WORD_VALID                  0b0000000000001000  //  3     3     valid sync word detected
#define RADIOLIB_SX126X_IRQ_RADIOLIB_PREAMBLE_DETECTED       0b0000000000000100  //  2     2     preamble detected
#define RADIOLIB_SX126X_IRQ_RX_DONE                          0b0000000000000010  //  1     1     packet received
#define RADIOLIB_SX126X_IRQ_TX_DONE                          0b0000000000000001  //  0     0     packet transmission completed
#define RADIOLIB_SX126X_IRQ_ALL                              0b0100001111111111  //  14    0     all interrupts
#define RADIOLIB_SX126X_IRQ_NONE                             0b0000000000000000  //  14     0    no interrupts
 
//RADIOLIB_SX126X_CMD_SET_DIO2_AS_RF_SWITCH_CTRL
#define RADIOLIB_SX126X_DIO2_AS_IRQ                            0x00        //  7     0     DIO2 configuration: IRQ
#define RADIOLIB_SX126X_DIO2_AS_RF_SWITCH                      0x01        //  7     0                         RF switch control
 
//RADIOLIB_SX126X_CMD_SET_DIO3_AS_TCXO_CTRL
#define RADIOLIB_SX126X_DIO3_OUTPUT_1_6                        0x00        //  7     0     DIO3 voltage output for TCXO: 1.6 V
#define RADIOLIB_SX126X_DIO3_OUTPUT_1_7                        0x01        //  7     0                                   1.7 V
#define RADIOLIB_SX126X_DIO3_OUTPUT_1_8                        0x02        //  7     0                                   1.8 V
#define RADIOLIB_SX126X_DIO3_OUTPUT_2_2                        0x03        //  7     0                                   2.2 V
#define RADIOLIB_SX126X_DIO3_OUTPUT_2_4                        0x04        //  7     0                                   2.4 V
#define RADIOLIB_SX126X_DIO3_OUTPUT_2_7                        0x05        //  7     0                                   2.7 V
#define RADIOLIB_SX126X_DIO3_OUTPUT_3_0                        0x06        //  7     0                                   3.0 V
#define RADIOLIB_SX126X_DIO3_OUTPUT_3_3                        0x07        //  7     0                                   3.3 V
 
//RADIOLIB_SX126X_CMD_SET_PACKET_TYPE
#define RADIOLIB_SX126X_PACKET_TYPE_GFSK                       0x00        //  7     0     packet type: GFSK
#define RADIOLIB_SX126X_PACKET_TYPE_LORA                       0x01        //  7     0                  LoRa
#define RADIOLIB_SX126X_PACKET_TYPE_LR_FHSS                    0x03        //  7     0                  LR-FHSS
 
//RADIOLIB_SX126X_CMD_SET_TX_PARAMS
#define RADIOLIB_SX126X_PA_RAMP_10U                            0x00        //  7     0     ramp time: 10 us
#define RADIOLIB_SX126X_PA_RAMP_20U                            0x01        //  7     0                20 us
#define RADIOLIB_SX126X_PA_RAMP_40U                            0x02        //  7     0                40 us
#define RADIOLIB_SX126X_PA_RAMP_80U                            0x03        //  7     0                80 us
#define RADIOLIB_SX126X_PA_RAMP_200U                           0x04        //  7     0                200 us
#define RADIOLIB_SX126X_PA_RAMP_800U                           0x05        //  7     0                800 us
#define RADIOLIB_SX126X_PA_RAMP_1700U                          0x06        //  7     0                1700 us
#define RADIOLIB_SX126X_PA_RAMP_3400U                          0x07        //  7     0                3400 us
 
//RADIOLIB_SX126X_CMD_SET_MODULATION_PARAMS
#define RADIOLIB_SX126X_GFSK_FILTER_NONE                       0x00        //  7     0     GFSK filter: none
#define RADIOLIB_SX126X_GFSK_FILTER_GAUSS_0_3                  0x08        //  7     0                  Gaussian, BT = 0.3
#define RADIOLIB_SX126X_GFSK_FILTER_GAUSS_0_5                  0x09        //  7     0                  Gaussian, BT = 0.5
#define RADIOLIB_SX126X_GFSK_FILTER_GAUSS_0_7                  0x0A        //  7     0                  Gaussian, BT = 0.7
#define RADIOLIB_SX126X_GFSK_FILTER_GAUSS_1                    0x0B        //  7     0                  Gaussian, BT = 1
#define RADIOLIB_SX126X_GFSK_RX_BW_4_8                         0x1F        //  7     0     GFSK Rx bandwidth: 4.8 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_5_8                         0x17        //  7     0                        5.8 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_7_3                         0x0F        //  7     0                        7.3 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_9_7                         0x1E        //  7     0                        9.7 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_11_7                        0x16        //  7     0                        11.7 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_14_6                        0x0E        //  7     0                        14.6 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_19_5                        0x1D        //  7     0                        19.5 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_23_4                        0x15        //  7     0                        23.4 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_29_3                        0x0D        //  7     0                        29.3 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_39_0                        0x1C        //  7     0                        39.0 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_46_9                        0x14        //  7     0                        46.9 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_58_6                        0x0C        //  7     0                        58.6 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_78_2                        0x1B        //  7     0                        78.2 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_93_8                        0x13        //  7     0                        93.8 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_117_3                       0x0B        //  7     0                        117.3 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_156_2                       0x1A        //  7     0                        156.2 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_187_2                       0x12        //  7     0                        187.2 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_234_3                       0x0A        //  7     0                        234.3 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_312_0                       0x19        //  7     0                        312.0 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_373_6                       0x11        //  7     0                        373.6 kHz
#define RADIOLIB_SX126X_GFSK_RX_BW_467_0                       0x09        //  7     0                        467.0 kHz
#define RADIOLIB_SX126X_LORA_BW_7_8                            0x00        //  7     0     LoRa bandwidth: 7.8 kHz
#define RADIOLIB_SX126X_LORA_BW_10_4                           0x08        //  7     0                     10.4 kHz
#define RADIOLIB_SX126X_LORA_BW_15_6                           0x01        //  7     0                     15.6 kHz
#define RADIOLIB_SX126X_LORA_BW_20_8                           0x09        //  7     0                     20.8 kHz
#define RADIOLIB_SX126X_LORA_BW_31_25                          0x02        //  7     0                     31.25 kHz
#define RADIOLIB_SX126X_LORA_BW_41_7                           0x0A        //  7     0                     41.7 kHz
#define RADIOLIB_SX126X_LORA_BW_62_5                           0x03        //  7     0                     62.5 kHz
#define RADIOLIB_SX126X_LORA_BW_125_0                          0x04        //  7     0                     125.0 kHz
#define RADIOLIB_SX126X_LORA_BW_250_0                          0x05        //  7     0                     250.0 kHz
#define RADIOLIB_SX126X_LORA_BW_500_0                          0x06        //  7     0                     500.0 kHz
#define RADIOLIB_SX126X_LORA_CR_4_5                            0x01        //  7     0     LoRa coding rate: 4/5
#define RADIOLIB_SX126X_LORA_CR_4_6                            0x02        //  7     0                       4/6
#define RADIOLIB_SX126X_LORA_CR_4_7                            0x03        //  7     0                       4/7
#define RADIOLIB_SX126X_LORA_CR_4_8                            0x04        //  7     0                       4/8
#define RADIOLIB_SX126X_LORA_LOW_DATA_RATE_OPTIMIZE_OFF        0x00        //  7     0     LoRa low data rate optimization: disabled
#define RADIOLIB_SX126X_LORA_LOW_DATA_RATE_OPTIMIZE_ON         0x01        //  7     0                                      enabled
 
//RADIOLIB_SX126X_CMD_SET_PACKET_PARAMS
#define RADIOLIB_SX126X_GFSK_PREAMBLE_DETECT_OFF               0x00        //  7     0     GFSK minimum preamble length before reception starts: detector disabled
#define RADIOLIB_SX126X_GFSK_PREAMBLE_DETECT_8                 0x04        //  7     0                                                           8 bits
#define RADIOLIB_SX126X_GFSK_PREAMBLE_DETECT_16                0x05        //  7     0                                                           16 bits
#define RADIOLIB_SX126X_GFSK_PREAMBLE_DETECT_24                0x06        //  7     0                                                           24 bits
#define RADIOLIB_SX126X_GFSK_PREAMBLE_DETECT_32                0x07        //  7     0                                                           32 bits
#define RADIOLIB_SX126X_GFSK_ADDRESS_FILT_OFF                  0x00        //  7     0     GFSK address filtering: disabled
#define RADIOLIB_SX126X_GFSK_ADDRESS_FILT_NODE                 0x01        //  7     0                             node only
#define RADIOLIB_SX126X_GFSK_ADDRESS_FILT_NODE_BROADCAST       0x02        //  7     0                             node and broadcast
#define RADIOLIB_SX126X_GFSK_PACKET_FIXED                      0x00        //  7     0     GFSK packet type: fixed (payload length known in advance to both sides)
#define RADIOLIB_SX126X_GFSK_PACKET_VARIABLE                   0x01        //  7     0                       variable (payload length added to packet)
#define RADIOLIB_SX126X_GFSK_CRC_OFF                           0x01        //  7     0     GFSK packet CRC: disabled
#define RADIOLIB_SX126X_GFSK_CRC_1_BYTE                        0x00        //  7     0                      1 byte
#define RADIOLIB_SX126X_GFSK_CRC_2_BYTE                        0x02        //  7     0                      2 byte
#define RADIOLIB_SX126X_GFSK_CRC_1_BYTE_INV                    0x04        //  7     0                      1 byte, inverted
#define RADIOLIB_SX126X_GFSK_CRC_2_BYTE_INV                    0x06        //  7     0                      2 byte, inverted
#define RADIOLIB_SX126X_GFSK_WHITENING_OFF                     0x00        //  7     0     GFSK data whitening: disabled
#define RADIOLIB_SX126X_GFSK_WHITENING_ON                      0x01        //  7     0                          enabled
#define RADIOLIB_SX126X_LORA_HEADER_EXPLICIT                   0x00        //  7     0     LoRa header mode: explicit
#define RADIOLIB_SX126X_LORA_HEADER_IMPLICIT                   0x01        //  7     0                       implicit
#define RADIOLIB_SX126X_LORA_CRC_OFF                           0x00        //  7     0     LoRa CRC mode: disabled
#define RADIOLIB_SX126X_LORA_CRC_ON                            0x01        //  7     0                    enabled
#define RADIOLIB_SX126X_LORA_IQ_STANDARD                       0x00        //  7     0     LoRa IQ setup: standard
#define RADIOLIB_SX126X_LORA_IQ_INVERTED                       0x01        //  7     0                    inverted
 
//RADIOLIB_SX126X_CMD_SET_CAD_PARAMS
#define RADIOLIB_SX126X_CAD_ON_1_SYMB                          0x00        //  7     0     number of symbols used for CAD: 1
#define RADIOLIB_SX126X_CAD_ON_2_SYMB                          0x01        //  7     0                                     2
#define RADIOLIB_SX126X_CAD_ON_4_SYMB                          0x02        //  7     0                                     4
#define RADIOLIB_SX126X_CAD_ON_8_SYMB                          0x03        //  7     0                                     8
#define RADIOLIB_SX126X_CAD_ON_16_SYMB                         0x04        //  7     0                                     16
#define RADIOLIB_SX126X_CAD_GOTO_STDBY                         0x00        //  7     0     after CAD is done, always go to STDBY_RC mode
#define RADIOLIB_SX126X_CAD_GOTO_RX                            0x01        //  7     0     after CAD is done, go to Rx mode if activity is detected
 
//RADIOLIB_SX126X_CMD_GET_STATUS
#define RADIOLIB_SX126X_STATUS_MODE_STDBY_RC                   0b00100000  //  6     4     current chip mode: STDBY_RC
#define RADIOLIB_SX126X_STATUS_MODE_STDBY_XOSC                 0b00110000  //  6     4                        STDBY_XOSC
#define RADIOLIB_SX126X_STATUS_MODE_FS                         0b01000000  //  6     4                        FS
#define RADIOLIB_SX126X_STATUS_MODE_RX                         0b01010000  //  6     4                        RX
#define RADIOLIB_SX126X_STATUS_MODE_TX                         0b01100000  //  6     4                        TX
#define RADIOLIB_SX126X_STATUS_DATA_AVAILABLE                  0b00000100  //  3     1     command status: packet received and data can be retrieved
#define RADIOLIB_SX126X_STATUS_CMD_TIMEOUT                     0b00000110  //  3     1                     SPI command timed out
#define RADIOLIB_SX126X_STATUS_CMD_INVALID                     0b00001000  //  3     1                     invalid SPI command
#define RADIOLIB_SX126X_STATUS_CMD_FAILED                      0b00001010  //  3     1                     SPI command failed to execute
#define RADIOLIB_SX126X_STATUS_TX_DONE                         0b00001100  //  3     1                     packet transmission done
#define RADIOLIB_SX126X_STATUS_SPI_FAILED                      0b11111111  //  7     0     SPI transaction failed
 
//RADIOLIB_SX126X_CMD_GET_PACKET_STATUS
#define RADIOLIB_SX126X_GFSK_RX_STATUS_PREAMBLE_ERR            0b10000000  //  7     7     GFSK Rx status: preamble error
#define RADIOLIB_SX126X_GFSK_RX_STATUS_SYNC_ERR                0b01000000  //  6     6                     sync word error
#define RADIOLIB_SX126X_GFSK_RX_STATUS_ADRS_ERR                0b00100000  //  5     5                     address error
#define RADIOLIB_SX126X_GFSK_RX_STATUS_CRC_ERR                 0b00010000  //  4     4                     CRC error
#define RADIOLIB_SX126X_GFSK_RX_STATUS_LENGTH_ERR              0b00001000  //  3     3                     length error
#define RADIOLIB_SX126X_GFSK_RX_STATUS_ABORT_ERR               0b00000100  //  2     2                     abort error
#define RADIOLIB_SX126X_GFSK_RX_STATUS_PACKET_RECEIVED         0b00000010  //  2     2                     packet received
#define RADIOLIB_SX126X_GFSK_RX_STATUS_PACKET_SENT             0b00000001  //  2     2                     packet sent
 
//RADIOLIB_SX126X_CMD_GET_DEVICE_ERRORS
#define RADIOLIB_SX126X_PA_RAMP_ERR                           0b100000000  //  8     8     device errors: PA ramping failed
#define RADIOLIB_SX126X_PLL_LOCK_ERR                          0b001000000  //  6     6                    PLL failed to lock
#define RADIOLIB_SX126X_XOSC_START_ERR                        0b000100000  //  5     5                    crystal oscillator failed to start
#define RADIOLIB_SX126X_IMG_CALIB_ERR                         0b000010000  //  4     4                    image calibration failed
#define RADIOLIB_SX126X_ADC_CALIB_ERR                         0b000001000  //  3     3                    ADC calibration failed
#define RADIOLIB_SX126X_PLL_CALIB_ERR                         0b000000100  //  2     2                    PLL calibration failed
#define RADIOLIB_SX126X_RC13M_CALIB_ERR                       0b000000010  //  1     1                    RC13M calibration failed
#define RADIOLIB_SX126X_RC64K_CALIB_ERR                       0b000000001  //  0     0                    RC64K calibration failed
 
 
// SX126X SPI register variables
//RADIOLIB_SX126X_REG_HOPPING_ENABLE
#define RADIOLIB_SX126X_HOPPING_ENABLED                        0b00000001  //  0     0     intra-packet hopping for LR-FHSS: enabled
#define RADIOLIB_SX126X_HOPPING_DISABLED                       0b00000000  //  0     0                                       (disabled)
 
//RADIOLIB_SX126X_REG_LORA_SYNC_WORD_MSB + LSB
#define RADIOLIB_SX126X_SYNC_WORD_PUBLIC                       0x34        // actually 0x3444  NOTE: The low nibbles in each byte (0x_4_4) are masked out since apparently, they're reserved.
#define RADIOLIB_SX126X_SYNC_WORD_PRIVATE                      0x12        // actually 0x1424        You couldn't make this up if you tried.
 
 
class SX126x: public PhysicalLayer {
  public:
    // introduce PhysicalLayer overloads
    using PhysicalLayer::transmit;
    using PhysicalLayer::receive;
    using PhysicalLayer::startTransmit;
    using PhysicalLayer::readData;
 
    SX126x(Module* mod);
 
    Module* getMod();
 
    // basic methods
 
    int16_t begin(uint8_t cr, uint8_t syncWord, uint16_t preambleLength, float tcxoVoltage, bool useRegulatorLDO = false);
 
    int16_t beginFSK(float br, float freqDev, float rxBw, uint16_t preambleLength, float tcxoVoltage, bool useRegulatorLDO = false);
 
    int16_t reset(bool verify = true);
 
    int16_t transmit(uint8_t* data, size_t len, uint8_t addr = 0) override;
 
    int16_t receive(uint8_t* data, size_t len) override;
 
    int16_t transmitDirect(uint32_t frf = 0) override;
 
    int16_t receiveDirect() override;
 
    int16_t scanChannel();
 
    int16_t sleep(bool retainConfig = true);
 
    int16_t standby() override;
 
    int16_t standby(uint8_t mode);
 
    // interrupt methods
 
    void setDio1Action(void (*func)(void));
 
    void clearDio1Action();
 
    int16_t startTransmit(uint8_t* data, size_t len, uint8_t addr = 0) override;
 
    int16_t finishTransmit() override;
 
    int16_t startReceive(uint32_t timeout = RADIOLIB_SX126X_RX_TIMEOUT_INF);
 
    int16_t startReceiveDutyCycle(uint32_t rxPeriod, uint32_t sleepPeriod);
 
    int16_t startReceiveDutyCycleAuto(uint16_t senderPreambleLength = 0, uint16_t minSymbols = 8);
 
    uint16_t getIrqStatus();
 
    int16_t readData(uint8_t* data, size_t len) override;
 
    int16_t startChannelScan();
 
    int16_t getChannelScanResult();
 
    // configuration methods
 
    int16_t setBandwidth(float bw);
 
    int16_t setSpreadingFactor(uint8_t sf);
 
    int16_t setCodingRate(uint8_t cr);
 
    int16_t setSyncWord(uint8_t syncWord, uint8_t controlBits = 0x44);
 
    int16_t setCurrentLimit(float currentLimit);
 
    float getCurrentLimit();
 
    int16_t setPreambleLength(uint16_t preambleLength);
 
    int16_t setFrequencyDeviation(float freqDev) override;
 
    int16_t setBitRate(float br);
 
    int16_t setRxBandwidth(float rxBw);
 
    int16_t setDataShaping(uint8_t sh) override;
 
    int16_t setSyncWord(uint8_t* syncWord, uint8_t len);
 
    int16_t setSyncBits(uint8_t *syncWord, uint8_t bitsLen);
 
    int16_t setNodeAddress(uint8_t nodeAddr);
 
    int16_t setBroadcastAddress(uint8_t broadAddr);
 
    int16_t disableAddressFiltering();
 
    int16_t setCRC(uint8_t len, uint16_t initial = 0x1D0F, uint16_t polynomial = 0x1021, bool inverted = true);
 
    int16_t setWhitening(bool enabled, uint16_t initial = 0x0100);
 
    int16_t setTCXO(float voltage, uint32_t delay = 5000);
 
    int16_t setDio2AsRfSwitch(bool enable = true);
 
    float getDataRate() const;
 
    float getRSSI();
 
    float getSNR();
 
    size_t getPacketLength(bool update = true) override;
 
   int16_t fixedPacketLengthMode(uint8_t len = RADIOLIB_SX126X_MAX_PACKET_LENGTH);
 
   int16_t variablePacketLengthMode(uint8_t maxLen = RADIOLIB_SX126X_MAX_PACKET_LENGTH);
 
   uint32_t getTimeOnAir(size_t len);
 
   float getRSSIInst();
 
   int16_t implicitHeader(size_t len);
 
   int16_t explicitHeader();
 
   int16_t setRegulatorLDO();
 
   int16_t setRegulatorDCDC();
 
   int16_t setEncoding(uint8_t encoding) override;
 
   void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn);
 
   int16_t forceLDRO(bool enable);
 
   int16_t autoLDRO();
 
   uint8_t randomByte();
 
   #if !defined(RADIOLIB_EXCLUDE_DIRECT_RECEIVE)
 
   void setDirectAction(void (*func)(void));
 
   void readBit(RADIOLIB_PIN_TYPE pin);
   #endif
 
 
#if !defined(RADIOLIB_GODMODE)
  protected:
#endif
    // SX126x SPI command implementations
    int16_t setTx(uint32_t timeout = 0);
    int16_t setRx(uint32_t timeout);
    int16_t setCad();
    int16_t setPaConfig(uint8_t paDutyCycle, uint8_t deviceSel, uint8_t hpMax = RADIOLIB_SX126X_PA_CONFIG_HP_MAX, uint8_t paLut = RADIOLIB_SX126X_PA_CONFIG_PA_LUT);
    int16_t writeRegister(uint16_t addr, uint8_t* data, uint8_t numBytes);
    int16_t readRegister(uint16_t addr, uint8_t* data, uint8_t numBytes);
    int16_t writeBuffer(uint8_t* data, uint8_t numBytes, uint8_t offset = 0x00);
    int16_t readBuffer(uint8_t* data, uint8_t numBytes);
    int16_t setDioIrqParams(uint16_t irqMask, uint16_t dio1Mask, uint16_t dio2Mask = RADIOLIB_SX126X_IRQ_NONE, uint16_t dio3Mask = RADIOLIB_SX126X_IRQ_NONE);
    int16_t clearIrqStatus(uint16_t clearIrqParams = RADIOLIB_SX126X_IRQ_ALL);
    int16_t setRfFrequency(uint32_t frf);
    int16_t calibrateImage(uint8_t* data);
    uint8_t getPacketType();
    int16_t setTxParams(uint8_t power, uint8_t rampTime = RADIOLIB_SX126X_PA_RAMP_200U);
    int16_t setModulationParams(uint8_t sf, uint8_t bw, uint8_t cr, uint8_t ldro);
    int16_t setModulationParamsFSK(uint32_t br, uint8_t pulseShape, uint8_t rxBw, uint32_t freqDev);
    int16_t setPacketParams(uint16_t preambleLength, uint8_t crcType, uint8_t payloadLength, uint8_t headerType, uint8_t invertIQ = RADIOLIB_SX126X_LORA_IQ_STANDARD);
    int16_t setPacketParamsFSK(uint16_t preambleLength, uint8_t crcType, uint8_t syncWordLength, uint8_t addrComp, uint8_t whitening, uint8_t packetType = RADIOLIB_SX126X_GFSK_PACKET_VARIABLE, uint8_t payloadLength = 0xFF, uint8_t preambleDetectorLength = RADIOLIB_SX126X_GFSK_PREAMBLE_DETECT_16);
    int16_t setBufferBaseAddress(uint8_t txBaseAddress = 0x00, uint8_t rxBaseAddress = 0x00);
    int16_t setRegulatorMode(uint8_t mode);
    uint8_t getStatus();
    uint32_t getPacketStatus();
    uint16_t getDeviceErrors();
    int16_t clearDeviceErrors();
 
    int16_t startReceiveCommon(uint32_t timeout = RADIOLIB_SX126X_RX_TIMEOUT_INF);
    int16_t setFrequencyRaw(float freq);
    int16_t setPacketMode(uint8_t mode, uint8_t len);
    int16_t setHeaderType(uint8_t headerType, size_t len = 0xFF);
 
    // fixes to errata
    int16_t fixSensitivity();
    int16_t fixPaClamping();
    int16_t fixImplicitTimeout();
    int16_t fixInvertedIQ(uint8_t iqConfig);
 
#if !defined(RADIOLIB_GODMODE) && !defined(RADIOLIB_LOW_LEVEL)
  protected:
#endif
    Module* _mod;
 
    // common low-level SPI interface
    int16_t SPIwriteCommand(uint8_t cmd, uint8_t* data, uint8_t numBytes, bool waitForBusy = true);
    int16_t SPIwriteCommand(uint8_t* cmd, uint8_t cmdLen, uint8_t* data, uint8_t numBytes, bool waitForBusy = true);
    int16_t SPIreadCommand(uint8_t cmd, uint8_t* data, uint8_t numBytes, bool waitForBusy = true);
    int16_t SPIreadCommand(uint8_t* cmd, uint8_t cmdLen, uint8_t* data, uint8_t numBytes, bool waitForBusy = true);
    int16_t SPItransfer(uint8_t* cmd, uint8_t cmdLen, bool write, uint8_t* dataOut, uint8_t* dataIn, uint8_t numBytes, bool waitForBusy, uint32_t timeout = 5000);
 
#if !defined(RADIOLIB_GODMODE)
  protected:
#endif
 
    uint8_t _bw = 0, _sf = 0, _cr = 0, _ldro = 0, _crcType = 0, _headerType = 0;
    uint16_t _preambleLength = 0;
    float _bwKhz = 0;
    bool _ldroAuto = true;
 
    uint32_t _br = 0, _freqDev = 0;
    uint8_t _rxBw = 0, _pulseShape = 0, _crcTypeFSK = 0, _syncWordLength = 0, _addrComp = 0, _whitening = 0, _packetType = 0;
    uint16_t _preambleLengthFSK = 0;
    float _rxBwKhz = 0;
 
    float _dataRate = 0;
 
    uint32_t _tcxoDelay = 0;
 
    size_t _implicitLen = 0;
 
    int16_t config(uint8_t modem);
};
 
#endif
 
#endif