commit/5ea986d570073773b5b721e73f8edfa11d0c7348/_l_r11x0_8h_source.html

 #if !defined(_RADIOLIB_LR11X0_H)

 #define _RADIOLIB_LR11X0_H


 #include "../../TypeDef.h"


 #if !RADIOLIB_EXCLUDE_LR11X0


 #include "../../Module.h"


 #include "../../protocols/PhysicalLayer/PhysicalLayer.h"


 // LR11X0 physical layer properties

 #define RADIOLIB_LR11X0_FREQUENCY_STEP_SIZE                     1.0

 #define RADIOLIB_LR11X0_MAX_PACKET_LENGTH                       255

 #define RADIOLIB_LR11X0_CRYSTAL_FREQ                            32.0

 #define RADIOLIB_LR11X0_DIV_EXPONENT                            25


 // LR11X0 SPI commands

 #define RADIOLIB_LR11X0_CMD_NOP                                 (0x0000)

 #define RADIOLIB_LR11X0_CMD_WRITE_REG_MEM                       (0x0105)

 #define RADIOLIB_LR11X0_CMD_READ_REG_MEM                        (0x0106)

 #define RADIOLIB_LR11X0_CMD_WRITE_BUFFER                        (0x0109)

 #define RADIOLIB_LR11X0_CMD_READ_BUFFER                         (0x010A)

 #define RADIOLIB_LR11X0_CMD_CLEAR_RX_BUFFER                     (0x010B)

 #define RADIOLIB_LR11X0_CMD_WRITE_REG_MEM_MASK                  (0x010C)

 #define RADIOLIB_LR11X0_CMD_GET_STATUS                          (0x0100)

 #define RADIOLIB_LR11X0_CMD_GET_VERSION                         (0x0101)

 #define RADIOLIB_LR11X0_CMD_GET_ERRORS                          (0x010D)

 #define RADIOLIB_LR11X0_CMD_CLEAR_ERRORS                        (0x010E)

 #define RADIOLIB_LR11X0_CMD_CALIBRATE                           (0x010F)

 #define RADIOLIB_LR11X0_CMD_SET_REG_MODE                        (0x0110)

 #define RADIOLIB_LR11X0_CMD_CALIB_IMAGE                         (0x0111)

 #define RADIOLIB_LR11X0_CMD_SET_DIO_AS_RF_SWITCH                (0x0112)

 #define RADIOLIB_LR11X0_CMD_SET_DIO_IRQ_PARAMS                  (0x0113)

 #define RADIOLIB_LR11X0_CMD_CLEAR_IRQ                           (0x0114)

 #define RADIOLIB_LR11X0_CMD_CONFIG_LF_LOCK                      (0x0116)

 #define RADIOLIB_LR11X0_CMD_SET_TCXO_MODE                       (0x0117)

 #define RADIOLIB_LR11X0_CMD_REBOOT                              (0x0118)

 #define RADIOLIB_LR11X0_CMD_GET_VBAT                            (0x0119)

 #define RADIOLIB_LR11X0_CMD_GET_TEMP                            (0x011A)

 #define RADIOLIB_LR11X0_CMD_SET_SLEEP                           (0x011B)

 #define RADIOLIB_LR11X0_CMD_SET_STANDBY                         (0x011C)

 #define RADIOLIB_LR11X0_CMD_SET_FS                              (0x011D)

 #define RADIOLIB_LR11X0_CMD_GET_RANDOM_NUMBER                   (0x0120)

 #define RADIOLIB_LR11X0_CMD_ERASE_INFO_PAGE                     (0x0121)

 #define RADIOLIB_LR11X0_CMD_WRITE_INFO_PAGE                     (0x0122)

 #define RADIOLIB_LR11X0_CMD_READ_INFO_PAGE                      (0x0123)

 #define RADIOLIB_LR11X0_CMD_GET_CHIP_EUI                        (0x0125)

 #define RADIOLIB_LR11X0_CMD_GET_SEMTECH_JOIN_EUI                (0x0126)

 #define RADIOLIB_LR11X0_CMD_DERIVE_ROOT_KEYS_AND_GET_PIN        (0x0127)

 #define RADIOLIB_LR11X0_CMD_ENABLE_SPI_CRC                      (0x0128)

 #define RADIOLIB_LR11X0_CMD_DRIVE_DIOS_IN_SLEEP_MODE            (0x012A)

 #define RADIOLIB_LR11X0_CMD_RESET_STATS                         (0x0200)

 #define RADIOLIB_LR11X0_CMD_GET_STATS                           (0x0201)

 #define RADIOLIB_LR11X0_CMD_GET_PACKET_TYPE                     (0x0202)

 #define RADIOLIB_LR11X0_CMD_GET_RX_BUFFER_STATUS                (0x0203)

 #define RADIOLIB_LR11X0_CMD_GET_PACKET_STATUS                   (0x0204)

 #define RADIOLIB_LR11X0_CMD_GET_RSSI_INST                       (0x0205)

 #define RADIOLIB_LR11X0_CMD_SET_GFSK_SYNC_WORD                  (0x0206)

 #define RADIOLIB_LR11X0_CMD_SET_LORA_PUBLIC_NETWORK             (0x0208)

 #define RADIOLIB_LR11X0_CMD_SET_RX                              (0x0209)

 #define RADIOLIB_LR11X0_CMD_SET_TX                              (0x020A)

 #define RADIOLIB_LR11X0_CMD_SET_RF_FREQUENCY                    (0x020B)

 #define RADIOLIB_LR11X0_CMD_AUTO_TX_RX                          (0x020C)

 #define RADIOLIB_LR11X0_CMD_SET_CAD_PARAMS                      (0x020D)

 #define RADIOLIB_LR11X0_CMD_SET_PACKET_TYPE                     (0x020E)

 #define RADIOLIB_LR11X0_CMD_SET_MODULATION_PARAMS               (0x020F)

 #define RADIOLIB_LR11X0_CMD_SET_PACKET_PARAMS                   (0x0210)

 #define RADIOLIB_LR11X0_CMD_SET_TX_PARAMS                       (0x0211)

 #define RADIOLIB_LR11X0_CMD_SET_PACKET_ADRS                     (0x0212)

 #define RADIOLIB_LR11X0_CMD_SET_RX_TX_FALLBACK_MODE             (0x0213)

 #define RADIOLIB_LR11X0_CMD_SET_RX_DUTY_CYCLE                   (0x0214)

 #define RADIOLIB_LR11X0_CMD_SET_PA_CONFIG                       (0x0215)

 #define RADIOLIB_LR11X0_CMD_STOP_TIMEOUT_ON_PREAMBLE            (0x0217)

 #define RADIOLIB_LR11X0_CMD_SET_CAD                             (0x0218)

 #define RADIOLIB_LR11X0_CMD_SET_TX_CW                           (0x0219)

 #define RADIOLIB_LR11X0_CMD_SET_TX_INFINITE_PREAMBLE            (0x021A)

 #define RADIOLIB_LR11X0_CMD_SET_LORA_SYNCH_TIMEOUT              (0x021B)

 #define RADIOLIB_LR11X0_CMD_SET_RANGING_ADDR                    (0x021C)

 #define RADIOLIB_LR11X0_CMD_SET_RANGING_REQ_ADDR                (0x021D)

 #define RADIOLIB_LR11X0_CMD_GET_RANGING_RESULT                  (0x021E)

 #define RADIOLIB_LR11X0_CMD_SET_RANGING_TX_RX_DELAY             (0x021F)

 #define RADIOLIB_LR11X0_CMD_SET_GFSK_CRC_PARAMS                 (0x0224)

 #define RADIOLIB_LR11X0_CMD_SET_GFSK_WHIT_PARAMS                (0x0225)

 #define RADIOLIB_LR11X0_CMD_SET_RX_BOOSTED                      (0x0227)

 #define RADIOLIB_LR11X0_CMD_SET_RANGING_PARAMETER               (0x0228)

 #define RADIOLIB_LR11X0_CMD_SET_LORA_SYNC_WORD                  (0x022B)

 #define RADIOLIB_LR11X0_CMD_LR_FHSS_BUILD_FRAME                 (0x022C)

 #define RADIOLIB_LR11X0_CMD_LR_FHSS_SET_SYNC_WORD               (0x022D)

 #define RADIOLIB_LR11X0_CMD_CONFIG_BLE_BEACON                   (0x022E)

 #define RADIOLIB_LR11X0_CMD_GET_LORA_RX_HEADER_INFOS            (0x0230)

 #define RADIOLIB_LR11X0_CMD_BLE_BEACON_SEND                     (0x0231)

 #define RADIOLIB_LR11X0_CMD_WIFI_SCAN                           (0x0300)

 #define RADIOLIB_LR11X0_CMD_WIFI_SCAN_TIME_LIMIT                (0x0301)

 #define RADIOLIB_LR11X0_CMD_WIFI_COUNTRY_CODE                   (0x0302)

 #define RADIOLIB_LR11X0_CMD_WIFI_COUNTRY_CODE_TIME_LIMIT        (0x0303)

 #define RADIOLIB_LR11X0_CMD_WIFI_GET_NB_RESULTS                 (0x0305)

 #define RADIOLIB_LR11X0_CMD_WIFI_READ_RESULTS                   (0x0306)

 #define RADIOLIB_LR11X0_CMD_WIFI_RESET_CUMUL_TIMINGS            (0x0307)

 #define RADIOLIB_LR11X0_CMD_WIFI_READ_CUMUL_TIMINGS             (0x0308)

 #define RADIOLIB_LR11X0_CMD_WIFI_GET_NB_COUNTRY_CODE_RESULTS    (0x0309)

 #define RADIOLIB_LR11X0_CMD_WIFI_READ_COUNTRY_CODE_RESULTS      (0x030A)

 #define RADIOLIB_LR11X0_CMD_WIFI_CFG_TIMESTAMP_AP_PHONE         (0x030B)

 #define RADIOLIB_LR11X0_CMD_WIFI_READ_VERSION                   (0x0320)

 #define RADIOLIB_LR11X0_CMD_GNSS_SET_CONSTELLATION_TO_USE       (0x0400)

 #define RADIOLIB_LR11X0_CMD_GNSS_READ_CONSTELLATION_TO_USE      (0x0401)

 #define RADIOLIB_LR11X0_CMD_GNSS_SET_ALMANAC_UPDATE             (0x0402)

 #define RADIOLIB_LR11X0_CMD_GNSS_READ_ALMANAC_UPDATE            (0x0403)

 #define RADIOLIB_LR11X0_CMD_GNSS_READ_VERSION                   (0x0406)

 #define RADIOLIB_LR11X0_CMD_GNSS_READ_SUPPORTED_CONSTELLATIONS  (0x0407)

 #define RADIOLIB_LR11X0_CMD_GNSS_SET_MODE                       (0x0408)

 #define RADIOLIB_LR11X0_CMD_GNSS_AUTONOMOUS                     (0x0409)

 #define RADIOLIB_LR11X0_CMD_GNSS_ASSISTED                       (0x040A)

 #define RADIOLIB_LR11X0_CMD_GNSS_SET_ASSISTANCE_POSITION        (0x0410)

 #define RADIOLIB_LR11X0_CMD_GNSS_READ_ASSISTANCE_POSITION       (0x0411)

 #define RADIOLIB_LR11X0_CMD_GNSS_PUSH_SOLVER_MSG                (0x0414)

 #define RADIOLIB_LR11X0_CMD_GNSS_PUSH_DM_MSG                    (0x0415)

 #define RADIOLIB_LR11X0_CMD_GNSS_GET_CONTEXT_STATUS             (0x0416)

 #define RADIOLIB_LR11X0_CMD_GNSS_GET_NB_SV_DETECTED             (0x0417)

 #define RADIOLIB_LR11X0_CMD_GNSS_GET_SV_DETECTED                (0x0418)

 #define RADIOLIB_LR11X0_CMD_GNSS_GET_CONSUMPTION                (0x0419)

 #define RADIOLIB_LR11X0_CMD_GNSS_GET_RESULT_SIZE                (0x040C)

 #define RADIOLIB_LR11X0_CMD_GNSS_READ_RESULTS                   (0x040D)

 #define RADIOLIB_LR11X0_CMD_GNSS_ALMANAC_FULL_UPDATE            (0x040E)

 #define RADIOLIB_LR11X0_CMD_GNSS_GET_SV_VISIBLE                 (0x041F)

 #define RADIOLIB_LR11X0_CMD_CRYPTO_SET_KEY                      (0x0502)

 #define RADIOLIB_LR11X0_CMD_CRYPTO_DERIVE_KEY                   (0x0503)

 #define RADIOLIB_LR11X0_CMD_CRYPTO_PROCESS_JOIN_ACCEPT          (0x0504)

 #define RADIOLIB_LR11X0_CMD_CRYPTO_COMPUTE_AES_CMAC             (0x0505)

 #define RADIOLIB_LR11X0_CMD_CRYPTO_VERIFY_AES_CMAC              (0x0506)

 #define RADIOLIB_LR11X0_CMD_CRYPTO_AES_ENCRYPT_01               (0x0507)

 #define RADIOLIB_LR11X0_CMD_CRYPTO_AES_ENCRYPT                  (0x0508)

 #define RADIOLIB_LR11X0_CMD_CRYPTO_AES_DECRYPT                  (0x0509)

 #define RADIOLIB_LR11X0_CMD_CRYPTO_STORE_TO_FLASH               (0x050A)

 #define RADIOLIB_LR11X0_CMD_CRYPTO_RESTORE_FROM_FLASH           (0x050B)

 #define RADIOLIB_LR11X0_CMD_CRYPTO_SET_PARAM                    (0x050D)

 #define RADIOLIB_LR11X0_CMD_CRYPTO_GET_PARAM                    (0x050E)

 #define RADIOLIB_LR11X0_CMD_CRYPTO_CHECK_ENCRYPTED_FIRMWARE_IMAGE         (0x050F)

 #define RADIOLIB_LR11X0_CMD_CRYPTO_CHECK_ENCRYPTED_FIRMWARE_IMAGE_RESULT  (0x0510)

 #define RADIOLIB_LR11X0_CMD_BOOT_ERASE_FLASH                    (0x8000)

 #define RADIOLIB_LR11X0_CMD_BOOT_WRITE_FLASH_ENCRYPTED          (0x8003)

 #define RADIOLIB_LR11X0_CMD_BOOT_REBOOT                         (0x8005)

 #define RADIOLIB_LR11X0_CMD_BOOT_GET_PIN                        (0x800B)

 #define RADIOLIB_LR11X0_CMD_BOOT_GET_CHIP_EUI                   (0x800C)

 #define RADIOLIB_LR11X0_CMD_BOOT_GET_JOIN_EUI                   (0x800D)


 // LR11X0 register map

 #define RADIOLIB_LR11X0_REG_SF6_SX127X_COMPAT                   (0x00F20414)

 #define RADIOLIB_LR11X0_REG_LORA_HIGH_POWER_FIX                 (0x00F30054)


 // LR11X0 SPI command variables


 // RADIOLIB_LR11X0_CMD_GET_STATUS                                                   MSB   LSB   DESCRIPTION

 #define RADIOLIB_LR11X0_STAT_1_CMD_FAIL                         (0x00UL << 1)   //  3     1     command status: last command could not be executed

 #define RADIOLIB_LR11X0_STAT_1_CMD_PERR                         (0x01UL << 1)   //  3     1                     processing error

 #define RADIOLIB_LR11X0_STAT_1_CMD_OK                           (0x02UL << 1)   //  3     1                     successfully processed

 #define RADIOLIB_LR11X0_STAT_1_CMD_DAT                          (0x03UL << 1)   //  3     1                     successfully processed, data is being transmitted

 #define RADIOLIB_LR11X0_STAT_1_IRQ_INACTIVE                     (0x00UL << 0)   //  0     0     interrupt status: inactive

 #define RADIOLIB_LR11X0_STAT_1_IRQ_ACTIVE                       (0x01UL << 0)   //  0     0                       at least 1 interrupt active

 #define RADIOLIB_LR11X0_STAT_2_CMD_RST_CLEARED                  (0x00UL << 4)   //  7     4     reset status: cleared

 #define RADIOLIB_LR11X0_STAT_2_CMD_RST_ANALOG                   (0x01UL << 4)   //  7     4                   analog (power on, brown-out)

 #define RADIOLIB_LR11X0_STAT_2_CMD_RST_EXTERNAL                 (0x02UL << 4)   //  7     4                   NRESET pin

 #define RADIOLIB_LR11X0_STAT_2_CMD_RST_SYSTEM                   (0x03UL << 4)   //  7     4                   system

 #define RADIOLIB_LR11X0_STAT_2_CMD_RST_WATCHDOG                 (0x04UL << 4)   //  7     4                   watchdog

 #define RADIOLIB_LR11X0_STAT_2_CMD_RST_WAKEUP                   (0x05UL << 4)   //  7     4                   NSS toggling wake-up

 #define RADIOLIB_LR11X0_STAT_2_CMD_RST_RTC                      (0x06UL << 4)   //  7     4                   realtime clock

 #define RADIOLIB_LR11X0_STAT_2_MODE_SLEEP                       (0x00UL << 1)   //  3     1     chip mode: sleep

 #define RADIOLIB_LR11X0_STAT_2_MODE_STBY_RC                     (0x01UL << 1)   //  3     1                standby with RC oscillator

 #define RADIOLIB_LR11X0_STAT_2_MODE_STBY_OSC                    (0x02UL << 1)   //  3     1                standby with external oscillator

 #define RADIOLIB_LR11X0_STAT_2_MODE_FS                          (0x03UL << 1)   //  3     1                frequency synthesis

 #define RADIOLIB_LR11X0_STAT_2_MODE_RX                          (0x04UL << 1)   //  3     1                receive

 #define RADIOLIB_LR11X0_STAT_2_MODE_TX                          (0x05UL << 1)   //  3     1                transmit

 #define RADIOLIB_LR11X0_STAT_2_MODE_WIFI_GNSS                   (0x06UL << 1)   //  3     1                WiFi or GNSS geolocation

 #define RADIOLIB_LR11X0_STAT_2_BOOT                             (0x00UL << 0)   //  0     0     code executed from: bootloader

 #define RADIOLIB_LR11X0_STAT_2_FLASH                            (0x01UL << 0)   //  0     0                         flash


 // RADIOLIB_LR11X0_CMD_WRITE_REG_MEM

 #define RADIOLIB_LR11X0_SPI_MAX_READ_WRITE_LEN                  (256)           //  7     0     maximum length of read/write SPI payload in bytes


 // RADIOLIB_LR11X0_CMD_GET_VERSION

 #define RADIOLIB_LR11X0_HW_LR1110                               (0x01UL << 0)   //  7     0     HW version: LR1110

 #define RADIOLIB_LR11X0_HW_LR1120                               (0x02UL << 0)   //  7     0                 LR1120

 #define RADIOLIB_LR11X0_HW_LR1121                               (0x03UL << 0)   //  7     0                 LR1121

 #define RADIOLIB_LR11X0_HW_BOOT                                 (0xDFUL << 0)   //  7     0                 bootloader mode


 // RADIOLIB_LR11X0_CMD_GET_ERRORS

 #define RADIOLIB_LR11X0_ERROR_STAT_LF_RC_CALIB_ERR              (0x01UL << 0)   //  15    0     error: low frequency RC not calibrated

 #define RADIOLIB_LR11X0_ERROR_STAT_HF_RC_CALIB_ERR              (0x01UL << 1)   //  15    0            high frequency RC not calibrated

 #define RADIOLIB_LR11X0_ERROR_STAT_ADC_CALIB_ERR                (0x01UL << 2)   //  15    0            ADC not calibrated

 #define RADIOLIB_LR11X0_ERROR_STAT_PLL_CALIB_ERR                (0x01UL << 3)   //  15    0            PLL not calibrated

 #define RADIOLIB_LR11X0_ERROR_STAT_IMG_CALIB_ERR                (0x01UL << 4)   //  15    0            image rejection not calibrated

 #define RADIOLIB_LR11X0_ERROR_STAT_HF_XOSC_START_ERR            (0x01UL << 5)   //  15    0            high frequency oscillator failed to start

 #define RADIOLIB_LR11X0_ERROR_STAT_LF_XOSC_START_ERR            (0x01UL << 6)   //  15    0            low frequency oscillator failed to start

 #define RADIOLIB_LR11X0_ERROR_STAT_PLL_LOCK_ERR                 (0x01UL << 7)   //  15    0            PLL failed to lock

 #define RADIOLIB_LR11X0_ERROR_STAT_RX_ADC_OFFSET_ERR            (0x01UL << 8)   //  15    0            ADC offset not calibrated


 // RADIOLIB_LR11X0_CMD_CALIBRATE

 #define RADIOLIB_LR11X0_CALIBRATE_PLL_TX                        (0x01UL << 5)   //  5     5     calibrate: Tx PLL

 #define RADIOLIB_LR11X0_CALIBRATE_IMG                           (0x01UL << 4)   //  4     4                image rejection

 #define RADIOLIB_LR11X0_CALIBRATE_ADC                           (0x01UL << 3)   //  3     3                A/D converter

 #define RADIOLIB_LR11X0_CALIBRATE_PLL                           (0x01UL << 2)   //  2     2                PLL

 #define RADIOLIB_LR11X0_CALIBRATE_HF_RC                         (0x01UL << 1)   //  1     1                high frequency RC

 #define RADIOLIB_LR11X0_CALIBRATE_LF_RC                         (0x01UL << 0)   //  0     0                low frequency RC

 #define RADIOLIB_LR11X0_CALIBRATE_ALL                           (0x3FUL << 0)   //  5     0                everything


 // RADIOLIB_LR11X0_CMD_SET_REG_MODE

 #define RADIOLIB_LR11X0_REG_MODE_LDO                            (0x00UL << 0)   //  0     0     regulator mode: LDO in all modes

 #define RADIOLIB_LR11X0_REG_MODE_DC_DC                          (0x01UL << 0)   //  0     0                     DC-DC and LDO


 // RADIOLIB_LR11X0_CMD_SET_DIO_AS_RF_SWITCH

 #define RADIOLIB_LR11X0_RFSW_DIO5_ENABLED                       (0x01UL << 0)   //  4     0     RF switch: DIO5 enabled

 #define RADIOLIB_LR11X0_RFSW_DIO5_DISABLED                      (0x00UL << 0)   //  4     0                DIO5 disabled (default)

 #define RADIOLIB_LR11X0_RFSW_DIO6_ENABLED                       (0x01UL << 1)   //  4     0     RF switch: DIO6 enabled

 #define RADIOLIB_LR11X0_RFSW_DIO6_DISABLED                      (0x00UL << 1)   //  4     0                DIO6 disabled (default)

 #define RADIOLIB_LR11X0_RFSW_DIO7_ENABLED                       (0x01UL << 2)   //  4     0     RF switch: DIO7 enabled

 #define RADIOLIB_LR11X0_RFSW_DIO7_DISABLED                      (0x00UL << 2)   //  4     0                DIO7 disabled (default)

 #define RADIOLIB_LR11X0_RFSW_DIO8_ENABLED                       (0x01UL << 3)   //  4     0     RF switch: DIO8 enabled

 #define RADIOLIB_LR11X0_RFSW_DIO8_DISABLED                      (0x00UL << 3)   //  4     0                DIO8 disabled (default)

 #define RADIOLIB_LR11X0_RFSW_DIO10_ENABLED                      (0x01UL << 4)   //  4     0     RF switch: DIO10 enabled

 #define RADIOLIB_LR11X0_RFSW_DIO10_DISABLED                     (0x00UL << 4)   //  4     0                DIO10 disabled (default)


 // RADIOLIB_LR11X0_CMD_SET_DIO_IRQ_PARAMS

 #define RADIOLIB_LR11X0_IRQ_TX_DONE                             (0x01UL << 2)   //  31    0     interrupt: packet transmitted

 #define RADIOLIB_LR11X0_IRQ_RX_DONE                             (0x01UL << 3)   //  31    0                packet received

 #define RADIOLIB_LR11X0_IRQ_PREAMBLE_DETECTED                   (0x01UL << 4)   //  31    0                preamble detected

 #define RADIOLIB_LR11X0_IRQ_SYNC_WORD_HEADER_VALID              (0x01UL << 5)   //  31    0                sync word or LoRa header valid

 #define RADIOLIB_LR11X0_IRQ_HEADER_ERR                          (0x01UL << 6)   //  31    0                LoRa header CRC error

 #define RADIOLIB_LR11X0_IRQ_CRC_ERR                             (0x01UL << 7)   //  31    0                packet CRC error

 #define RADIOLIB_LR11X0_IRQ_CAD_DONE                            (0x01UL << 8)   //  31    0                CAD completed

 #define RADIOLIB_LR11X0_IRQ_CAD_DETECTED                        (0x01UL << 9)   //  31    0                CAD detected

 #define RADIOLIB_LR11X0_IRQ_TIMEOUT                             (0x01UL << 10)  //  31    0                Rx or Tx timeout

 #define RADIOLIB_LR11X0_IRQ_LR_FHSS_HOP                         (0x01UL << 11)  //  31    0                FHSS hop

 #define RADIOLIB_LR11X0_IRQ_GNSS_DONE                           (0x01UL << 19)  //  31    0                GNSS scan finished

 #define RADIOLIB_LR11X0_IRQ_WIFI_DONE                           (0x01UL << 20)  //  31    0                WiFi scan finished

 #define RADIOLIB_LR11X0_IRQ_LBD                                 (0x01UL << 21)  //  31    0                low battery detected

 #define RADIOLIB_LR11X0_IRQ_CMD_ERROR                           (0x01UL << 22)  //  31    0                command error

 #define RADIOLIB_LR11X0_IRQ_ERROR                               (0x01UL << 23)  //  31    0                some other error than CMD_ERR

 #define RADIOLIB_LR11X0_IRQ_FSK_LEN_ERROR                       (0x01UL << 24)  //  31    0                FSK packet received with length error

 #define RADIOLIB_LR11X0_IRQ_FSK_ADDR_ERROR                      (0x01UL << 25)  //  31    0                FSK packet received with address error

 #define RADIOLIB_LR11X0_IRQ_LORA_RX_TIMESTAMP                   (0x01UL << 27)  //  31    0                last LoRa symbol was received (timestamp source)

 #define RADIOLIB_LR11X0_IRQ_ALL                                 (0x0BF80FFCUL)  //  31    0                all interrupts

 #define RADIOLIB_LR11X0_IRQ_NONE                                (0x00UL << 0)   //  31    0                no interrupts


 // RADIOLIB_LR11X0_CMD_CONFIG_LF_LOCK

 #define RADIOLIB_LR11X0_LF_CLK_RC                               (0x00UL << 0)   //  1     0     32.768 kHz source: RC oscillator

 #define RADIOLIB_LR11X0_LF_CLK_XOSC                             (0x01UL << 0)   //  1     0                        crystal oscillator

 #define RADIOLIB_LR11X0_LF_CLK_EXT                              (0x02UL << 0)   //  1     0                        external signal on DIO11

 #define RADIOLIB_LR11X0_LF_BUSY_RELEASE_DISABLED                (0x00UL << 2)   //  2     2

 #define RADIOLIB_LR11X0_LF_BUSY_RELEASE_ENABLED                 (0x01UL << 2)   //  2     2


 // RADIOLIB_LR11X0_CMD_SET_TCXO_MODE

 #define RADIOLIB_LR11X0_TCXO_VOLTAGE_1_6                        (0x00UL << 0)   //  2     0     TCXO supply voltage: 1.6V

 #define RADIOLIB_LR11X0_TCXO_VOLTAGE_1_7                        (0x01UL << 0)   //  2     0                          1.7V

 #define RADIOLIB_LR11X0_TCXO_VOLTAGE_1_8                        (0x02UL << 0)   //  2     0                          1.8V

 #define RADIOLIB_LR11X0_TCXO_VOLTAGE_2_2                        (0x03UL << 0)   //  2     0                          2.2V

 #define RADIOLIB_LR11X0_TCXO_VOLTAGE_2_4                        (0x04UL << 0)   //  2     0                          2.4V

 #define RADIOLIB_LR11X0_TCXO_VOLTAGE_2_7                        (0x05UL << 0)   //  2     0                          2.7V

 #define RADIOLIB_LR11X0_TCXO_VOLTAGE_3_0                        (0x06UL << 0)   //  2     0                          3.0V

 #define RADIOLIB_LR11X0_TCXO_VOLTAGE_3_3                        (0x07UL << 0)   //  2     0                          3.3V


 // RADIOLIB_LR11X0_CMD_SET_SLEEP

 #define RADIOLIB_LR11X0_SLEEP_RETENTION_DISABLED                (0x00UL << 0)   //  0     0     configuration retention in sleep mode: disabled

 #define RADIOLIB_LR11X0_SLEEP_RETENTION_ENABLED                 (0x01UL << 0)   //  0     0                                            enabled

 #define RADIOLIB_LR11X0_SLEEP_WAKEUP_DISABLED                   (0x00UL << 0)   //  1     1     automated wakeup: disabled

 #define RADIOLIB_LR11X0_SLEEP_WAKEUP_ENABLED                    (0x01UL << 0)   //  1     1                       enabled


 // RADIOLIB_LR11X0_CMD_SET_STANDBY

 #define RADIOLIB_LR11X0_STANDBY_RC                              (0x00UL << 0)   //  7     0     standby mode: RC oscillator

 #define RADIOLIB_LR11X0_STANDBY_XOSC                            (0x00UL << 0)   //  7     0                   XTAL/TCXO oscillator


 // RADIOLIB_LR11X0_CMD_ERASE_INFO_PAGE

 #define RADIOLIB_LR11X0_INFO_PAGE                               (1)


 // RADIOLIB_LR11X0_CMD_GET_CHIP_EUI

 #define RADIOLIB_LR11X0_EUI_LEN                                 (8)


 // RADIOLIB_LR11X0_CMD_DERIVE_ROOT_KEYS_AND_GET_PIN

 #define RADIOLIB_LR11X0_PIN_LEN                                 (4)


 // RADIOLIB_LR11X0_CMD_GET_PACKET_STATUS

 #define RADIOLIB_LR11X0_RX_STATUS_ADDR_ERR                      (0x01UL << 5)   //  7     0     Rx status: address filtering error

 #define RADIOLIB_LR11X0_RX_STATUS_CRC_ERR                       (0x01UL << 4)   //  7     0                CRC error

 #define RADIOLIB_LR11X0_RX_STATUS_LEN_ERR                       (0x01UL << 3)   //  7     0                length filtering error

 #define RADIOLIB_LR11X0_RX_STATUS_ABORTED                       (0x01UL << 2)   //  7     0                packet reception aborted

 #define RADIOLIB_LR11X0_RX_STATUS_PACKET_RECEIVED               (0x01UL << 1)   //  7     0                packet received

 #define RADIOLIB_LR11X0_RX_STATUS_PACKET_SENT                   (0x01UL << 0)   //  7     0                packet sent


 // RADIOLIB_LR11X0_CMD_SET_GFSK_SYNC_WORD

 #define RADIOLIB_LR11X0_GFSK_SYNC_WORD_LEN                      (8)


 // RADIOLIB_LR11X0_CMD_SET_LORA_PUBLIC_NETWORK

 #define RADIOLIB_LR11X0_LORA_PRIVATE_NETWORK                    (0x00UL << 0)   //  7     0     LoRa sync word: private network

 #define RADIOLIB_LR11X0_LORA_PUBLIC_NETWORK                     (0x01UL << 0)   //  7     0                     public network


 // RADIOLIB_LR11X0_CMD_SET_RX

 #define RADIOLIB_LR11X0_RX_TIMEOUT_NONE                         (0x000000UL)    //  23    0     Rx timeout duration: no timeout (Rx single mode)

 #define RADIOLIB_LR11X0_RX_TIMEOUT_INF                          (0xFFFFFFUL)    //  23    0                          infinite (Rx continuous mode)


 // RADIOLIB_LR11X0_CMD_SET_TX

 #define RADIOLIB_LR11X0_TX_TIMEOUT_NONE                         (0x000000UL)    //  23    0     disable Tx timeout


 // RADIOLIB_LR11X0_CMD_AUTO_TX_RX

 #define RADIOLIB_LR11X0_AUTO_TX_RX_DISABLED                     (0xFFFFFFUL)    //  23    0     disable auto Tx/Rx mode

 #define RADIOLIB_LR11X0_AUTO_TX_RX_SKIP_INT                     (0x000000UL)    //  23    0     skip intermediary mode

 #define RADIOLIB_LR11X0_AUTO_INTERMEDIARY_MODE_SLEEP            (0x00UL << 0)   //  1     0     intermediary mode: sleep

 #define RADIOLIB_LR11X0_AUTO_INTERMEDIARY_MODE_STBY_RC          (0x01UL << 0)   //  1     0                        standby with RC

 #define RADIOLIB_LR11X0_AUTO_INTERMEDIARY_MODE_STBY_XOSC        (0x02UL << 0)   //  1     0                        standby with XOSC

 #define RADIOLIB_LR11X0_AUTO_INTERMEDIARY_MODE_FS               (0x03UL << 0)   //  1     0                        frequency synthesis

 #define RADIOLIB_LR11X0_AUTO_TX_RX_TIMEOUT_DISABLED             (0x000000UL)    //  23    0     disable timeout of the second mode


 // RADIOLIB_LR11X0_CMD_SET_CAD_PARAMS

 #define RADIOLIB_LR11X0_CAD_EXIT_MODE_STBY_RC                   (0x00UL << 0)   //  7     0     mode to set after CAD: standby with RC

 #define RADIOLIB_LR11X0_CAD_EXIT_MODE_RX                        (0x01UL << 0)   //  7     0                            receive if activity detected

 #define RADIOLIB_LR11X0_CAD_EXIT_MODE_LBT                       (0x10UL << 0)   //  7     0                            transmit if no activity detected

 #define RADIOLIB_LR11X0_CAD_PARAM_DEFAULT                       (0xFFUL << 0)   //  7     0     used by the CAD methods to specify default parameter value


 // RADIOLIB_LR11X0_CMD_SET_PACKET_TYPE

 #define RADIOLIB_LR11X0_PACKET_TYPE_NONE                        (0x00UL << 0)   //  2     0     packet type: none

 #define RADIOLIB_LR11X0_PACKET_TYPE_GFSK                        (0x01UL << 0)   //  2     0                  (G)FSK

 #define RADIOLIB_LR11X0_PACKET_TYPE_LORA                        (0x02UL << 0)   //  2     0                  LoRa

 #define RADIOLIB_LR11X0_PACKET_TYPE_SIGFOX                      (0x03UL << 0)   //  2     0                  Sigfox

 #define RADIOLIB_LR11X0_PACKET_TYPE_LR_FHSS                     (0x04UL << 0)   //  2     0                  GMSK/LR-FHSS

 #define RADIOLIB_LR11X0_PACKET_TYPE_RANGING                     (0x05UL << 0)   //  2     0                  ranging

 #define RADIOLIB_LR11X0_PACKET_TYPE_BLE                         (0x06UL << 0)   //  2     0                  BLE beacon


 // RADIOLIB_LR11X0_CMD_SET_MODULATION_PARAMS

 #define RADIOLIB_LR11X0_LORA_BW_62_5                            (0x03UL << 0)   //  7     0     LoRa bandwidth: 62.5 kHz

 #define RADIOLIB_LR11X0_LORA_BW_125_0                           (0x04UL << 0)   //  7     0                     125.0 kHz

 #define RADIOLIB_LR11X0_LORA_BW_250_0                           (0x05UL << 0)   //  7     0                     250.0 kHz

 #define RADIOLIB_LR11X0_LORA_BW_500_0                           (0x06UL << 0)   //  7     0                     500.0 kHz

 #define RADIOLIB_LR11X0_LORA_CR_4_5_SHORT                       (0x01UL << 0)   //  7     0     coding rate: 4/5 with short interleaver

 #define RADIOLIB_LR11X0_LORA_CR_4_6_SHORT                       (0x02UL << 0)   //  7     0                  4/6 with short interleaver

 #define RADIOLIB_LR11X0_LORA_CR_4_7_SHORT                       (0x03UL << 0)   //  7     0                  4/7 with short interleaver

 #define RADIOLIB_LR11X0_LORA_CR_4_8_SHORT                       (0x04UL << 0)   //  7     0                  4/8 with short interleaver

 #define RADIOLIB_LR11X0_LORA_CR_4_5_LONG                        (0x05UL << 0)   //  7     0                  4/5 with long interleaver

 #define RADIOLIB_LR11X0_LORA_CR_4_6_LONG                        (0x06UL << 0)   //  7     0                  4/6 with long interleaver

 #define RADIOLIB_LR11X0_LORA_CR_4_8_LONG                        (0x07UL << 0)   //  7     0                  4/8 with long interleaver

 #define RADIOLIB_LR11X0_LORA_LDRO_DISABLED                      (0x00UL << 0)   //  7     0     low data rate optimize: disabled

 #define RADIOLIB_LR11X0_LORA_LDRO_ENABLED                       (0x01UL << 0)   //  7     0                             enabled

 #define RADIOLIB_LR11X0_GFSK_BIT_RATE_DIV_DISABLED              (0x00UL << 31)  //  31    0     divide bit rate value by 256: disabled

 #define RADIOLIB_LR11X0_GFSK_BIT_RATE_DIV_ENABLED               (0x01UL << 31)  //  31    0                                   enabled

 #define RADIOLIB_LR11X0_GFSK_SHAPING_NONE                       (0x00UL << 0)   //  7     0     shaping filter: none

 #define RADIOLIB_LR11X0_GFSK_SHAPING_GAUSSIAN_BT_0_3            (0x08UL << 0)   //  7     0                     Gaussian, BT = 0.3

 #define RADIOLIB_LR11X0_GFSK_SHAPING_GAUSSIAN_BT_0_5            (0x09UL << 0)   //  7     0                     Gaussian, BT = 0.5

 #define RADIOLIB_LR11X0_GFSK_SHAPING_GAUSSIAN_BT_0_7            (0x0AUL << 0)   //  7     0                     Gaussian, BT = 0.7

 #define RADIOLIB_LR11X0_GFSK_SHAPING_GAUSSIAN_BT_1_0            (0x0BUL << 0)   //  7     0                     Gaussian, BT = 1.0

 #define RADIOLIB_LR11X0_GFSK_SHAPING_RAISED_COSINE_BT_0_7       (0x16UL << 0)   //  7     0                     raised cosine, BT = 0.7

 #define RADIOLIB_LR11X0_GFSK_RX_BW_4_8                          (0x1FUL << 0)   //  7     0     GFSK Rx bandwidth: 4.8 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_5_8                          (0x17UL << 0)   //  7     0                        5.8 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_7_3                          (0x0FUL << 0)   //  7     0                        7.3 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_9_7                          (0x1EUL << 0)   //  7     0                        9.7 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_11_7                         (0x16UL << 0)   //  7     0                        11.7 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_14_6                         (0x0EUL << 0)   //  7     0                        14.6 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_19_5                         (0x1DUL << 0)   //  7     0                        19.5 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_23_4                         (0x15UL << 0)   //  7     0                        23.4 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_29_3                         (0x0DUL << 0)   //  7     0                        29.3 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_39_0                         (0x1CUL << 0)   //  7     0                        39.0 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_46_9                         (0x14UL << 0)   //  7     0                        46.9 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_58_6                         (0x0CUL << 0)   //  7     0                        58.6 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_78_2                         (0x1BUL << 0)   //  7     0                        78.2 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_93_8                         (0x13UL << 0)   //  7     0                        93.8 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_117_3                        (0x0BUL << 0)   //  7     0                        117.3 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_156_2                        (0x1AUL << 0)   //  7     0                        156.2 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_187_2                        (0x12UL << 0)   //  7     0                        187.2 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_234_3                        (0x0AUL << 0)   //  7     0                        234.3 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_312_0                        (0x19UL << 0)   //  7     0                        312.0 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_373_6                        (0x11UL << 0)   //  7     0                        373.6 kHz

 #define RADIOLIB_LR11X0_GFSK_RX_BW_467_0                        (0x09UL << 0)   //  7     0                        467.0 kHz

 #define RADIOLIB_LR11X0_LR_FHSS_BIT_RATE                        (488.28215)     //  31    0     LR FHSS bit rate: 488.28215 bps

 #define RADIOLIB_LR11X0_LR_FHSS_BIT_RATE_RAW                    (0x8001E848UL)  //  31    0                       488.28215 bps in raw

 #define RADIOLIB_LR11X0_LR_FHSS_SHAPING_GAUSSIAN_BT_1_0         (0x0BUL << 0)   //  7     0     shaping filter: Gaussian, BT = 1.0

 #define RADIOLIB_LR11X0_SIGFOX_SHAPING_GAUSSIAN_BT_0_7          (0x16UL << 0)   //  7     0     shaping filter: Gaussian, BT = 0.7


 // RADIOLIB_LR11X0_CMD_SET_PACKET_PARAMS

 #define RADIOLIB_LR11X0_LORA_HEADER_EXPLICIT                    (0x00UL << 0)   //  7     0     LoRa header mode: explicit

 #define RADIOLIB_LR11X0_LORA_HEADER_IMPLICIT                    (0x01UL << 0)   //  7     0                       implicit

 #define RADIOLIB_LR11X0_LORA_PAYLOAD_LEN_ANY                    (0x00UL << 0)   //  7     0     accept any payload length

 #define RADIOLIB_LR11X0_LORA_CRC_ENABLED                        (0x01UL << 0)   //  7     0     CRC: enabled

 #define RADIOLIB_LR11X0_LORA_CRC_DISABLED                       (0x00UL << 0)   //  7     0          disabled

 #define RADIOLIB_LR11X0_LORA_IQ_STANDARD                        (0x00UL << 0)   //  7     0     IQ setup: standard

 #define RADIOLIB_LR11X0_LORA_IQ_INVERTED                        (0x01UL << 0)   //  7     0               inverted

 #define RADIOLIB_LR11X0_GFSK_PREAMBLE_DETECT_DISABLED           (0x00UL << 0)   //  7     0     preamble detector: disabled

 #define RADIOLIB_LR11X0_GFSK_PREAMBLE_DETECT_8_BITS             (0x04UL << 0)   //  7     0                        8 bits

 #define RADIOLIB_LR11X0_GFSK_PREAMBLE_DETECT_16_BITS            (0x05UL << 0)   //  7     0                        16 bits

 #define RADIOLIB_LR11X0_GFSK_PREAMBLE_DETECT_24_BITS            (0x06UL << 0)   //  7     0                        24 bits

 #define RADIOLIB_LR11X0_GFSK_PREAMBLE_DETECT_32_BITS            (0x07UL << 0)   //  7     0                        32 bits

 #define RADIOLIB_LR11X0_GFSK_ADDR_FILTER_DISABLED               (0x00UL << 0)   //  7     0     address filtering: disabled

 #define RADIOLIB_LR11X0_GFSK_ADDR_FILTER_NODE                   (0x01UL << 0)   //  7     0                        node address

 #define RADIOLIB_LR11X0_GFSK_ADDR_FILTER_NODE_BROADCAST         (0x02UL << 0)   //  7     0                        node and broadcast address

 #define RADIOLIB_LR11X0_GFSK_PACKET_LENGTH_FIXED                (0x00UL << 0)   //  7     0     packet length: fixed

 #define RADIOLIB_LR11X0_GFSK_PACKET_LENGTH_VARIABLE             (0x01UL << 0)   //  7     0                    variable

 #define RADIOLIB_LR11X0_GFSK_PACKET_LENGTH_VARIABLE_SX128X      (0x02UL << 0)   //  7     0                    variable, SX128x 9-bit length encoding

 #define RADIOLIB_LR11X0_GFSK_PAYLOAD_LEN_ANY                    (0x00UL << 0)   //  7     0     accept any payload length

 #define RADIOLIB_LR11X0_GFSK_CRC_DISABLED                       (0x01UL << 0)   //  7     0     CRC: disabled

 #define RADIOLIB_LR11X0_GFSK_CRC_1_BYTE                         (0x00UL << 0)   //  7     0          1-byte

 #define RADIOLIB_LR11X0_GFSK_CRC_2_BYTE                         (0x02UL << 0)   //  7     0          2-byte

 #define RADIOLIB_LR11X0_GFSK_CRC_1_BYTE_INV                     (0x04UL << 0)   //  7     0          1-byte, inverted

 #define RADIOLIB_LR11X0_GFSK_CRC_2_BYTE_INV                     (0x06UL << 0)   //  7     0          2-byte, inverted

 #define RADIOLIB_LR11X0_GFSK_WHITENING_DISABLED                 (0x00UL << 0)   //  7     0     whitening: disabled

 #define RADIOLIB_LR11X0_GFSK_WHITENING_ENABLED                  (0x01UL << 0)   //  7     0                enabled


 // RADIOLIB_LR11X0_CMD_SET_TX_PARAMS

 #define RADIOLIB_LR11X0_PA_RAMP_48U                             (0x02UL << 0)   //  7     0     PA ramp time: 48 us


 // RADIOLIB_LR11X0_CMD_SET_RX_TX_FALLBACK_MODE

 #define RADIOLIB_LR11X0_FALLBACK_MODE_STBY_RC                   (0x01UL << 0)   //  1     0     fallback mode after Rx/Tx: standby with RC

 #define RADIOLIB_LR11X0_FALLBACK_MODE_STBY_XOSC                 (0x02UL << 0)   //  1     0                                standby with XOSC

 #define RADIOLIB_LR11X0_FALLBACK_MODE_FS                        (0x03UL << 0)   //  1     0                                frequency synthesis


 // RADIOLIB_LR11X0_CMD_SET_RX_DUTY_CYCLE

 #define RADIOLIB_LR11X0_RX_DUTY_CYCLE_MODE_RX                   (0x00UL << 0)   //  0     0     mode in Rx windows: Rx (default)

 #define RADIOLIB_LR11X0_RX_DUTY_CYCLE_MODE_CAD                  (0x01UL << 0)   //  0     0                         CAD

 #define RADIOLIB_LR11X0_TIMING_STEP                             (1.0f/32768.0f) //  23    0     timing step fo delays


 // RADIOLIB_LR11X0_CMD_SET_PA_CONFIG

 #define RADIOLIB_LR11X0_PA_SEL_LP                               (0x00UL << 0)   //  7     0     PA select: low power PA

 #define RADIOLIB_LR11X0_PA_SEL_HP                               (0x01UL << 0)   //  7     0                high power PA

 #define RADIOLIB_LR11X0_PA_SEL_HF                               (0x02UL << 0)   //  7     0                high frequency PA

 #define RADIOLIB_LR11X0_PA_SUPPLY_INTERNAL                      (0x00UL << 0)   //  7     0     PA power source: internal

 #define RADIOLIB_LR11X0_PA_SUPPLY_VBAT                          (0x01UL << 0)   //  7     0                      VBAT (required for >= 14 dBm)


 // RADIOLIB_LR11X0_CMD_STOP_TIMEOUT_ON_PREAMBLE

 #define RADIOLIB_LR11X0_STOP_ON_SYNC_HEADER                     (0x00UL << 0)   //  0     0     stop timeout on: sync word or header (default)

 #define RADIOLIB_LR11X0_STOP_ON_PREAMBLE                        (0x01UL << 0)   //  0     0                      preamble


 // RADIOLIB_LR11X0_CMD_GET_RANGING_RESULT

 #define RADIOLIB_LR11X0_RANGING_RESULT_DISTANCE                 (0)             //  7     0     ranging result type: distance

 #define RADIOLIB_LR11X0_RANGING_RESULT_RSSI                     (1)             //  7     0                          RSSI


 // RADIOLIB_LR11X0_CMD_SET_RX_BOOSTED

 #define RADIOLIB_LR11X0_RX_BOOSTED_ENABLED                      (0x01UL << 0)   //  0     0     Rx boosted mode: enabled

 #define RADIOLIB_LR11X0_RX_BOOSTED_DISABLED                     (0x00UL << 0)   //  0     0                      disabled


 // RADIOLIB_LR11X0_CMD_SET_LORA_SYNC_WORD

 #define RADIOLIB_LR11X0_LORA_SYNC_WORD_PRIVATE                  (0x12)

 #define RADIOLIB_LR11X0_LORA_SYNC_WORD_PUBLIC                   (0x34)


 // RADIOLIB_LR11X0_CMD_LR_FHSS_BUILD_FRAME

 #define RADIOLIB_LR11X0_LR_FHSS_CR_5_6                          (0x00UL << 0)   //  7     0     LR FHSS coding rate: 5/6

 #define RADIOLIB_LR11X0_LR_FHSS_CR_2_3                          (0x01UL << 0)   //  7     0                          2/3

 #define RADIOLIB_LR11X0_LR_FHSS_CR_1_2                          (0x02UL << 0)   //  7     0                          1/2

 #define RADIOLIB_LR11X0_LR_FHSS_CR_1_3                          (0x03UL << 0)   //  7     0                          1/3

 #define RADIOLIB_LR11X0_LR_FHSS_MOD_TYPE_GMSK                   (0x00UL << 0)   //  7     0     LR FHSS modulation: GMSK

 #define RADIOLIB_LR11X0_LR_FHSS_GRID_STEP_FCC                   (0x00UL << 0)   //  7     0     LR FHSS step size: 25.390625 kHz (FCC)

 #define RADIOLIB_LR11X0_LR_FHSS_GRID_STEP_NON_FCC               (0x01UL << 0)   //  7     0                        3.90625 kHz (non-FCC)

 #define RADIOLIB_LR11X0_LR_FHSS_HOPPING_DISABLED                (0x00UL << 0)   //  7     0     LR FHSS hopping: disabled

 #define RADIOLIB_LR11X0_LR_FHSS_HOPPING_ENABLED                 (0x01UL << 0)   //  7     0                      enabled

 #define RADIOLIB_LR11X0_LR_FHSS_BW_39_06                        (0x00UL << 0)   //  7     0     LR FHSS bandwidth: 39.06 kHz

 #define RADIOLIB_LR11X0_LR_FHSS_BW_85_94                        (0x01UL << 0)   //  7     0                        85.94 kHz

 #define RADIOLIB_LR11X0_LR_FHSS_BW_136_72                       (0x02UL << 0)   //  7     0                        136.72 kHz

 #define RADIOLIB_LR11X0_LR_FHSS_BW_183_59                       (0x03UL << 0)   //  7     0                        183.59 kHz

 #define RADIOLIB_LR11X0_LR_FHSS_BW_335_94                       (0x04UL << 0)   //  7     0                        335.94 kHz

 #define RADIOLIB_LR11X0_LR_FHSS_BW_386_72                       (0x05UL << 0)   //  7     0                        386.72 kHz

 #define RADIOLIB_LR11X0_LR_FHSS_BW_722_66                       (0x06UL << 0)   //  7     0                        722.66 kHz

 #define RADIOLIB_LR11X0_LR_FHSS_BW_773_44                       (0x07UL << 0)   //  7     0                        773.44 kHz

 #define RADIOLIB_LR11X0_LR_FHSS_BW_1523_4                       (0x08UL << 0)   //  7     0                        1523.4 kHz

 #define RADIOLIB_LR11X0_LR_FHSS_BW_1574_2                       (0x09UL << 0)   //  7     0                        1574.2 kHz


 // RADIOLIB_LR11X0_CMD_GET_LORA_RX_HEADER_INFOS

 #define RADIOLIB_LR11X0_LAST_HEADER_CRC_ENABLED                 (0x01UL << 4)   //  4     4     last header CRC: enabled

 #define RADIOLIB_LR11X0_LAST_HEADER_CRC_DISABLED                (0x00UL << 4)   //  4     4                      disabled


 // RADIOLIB_LR11X0_CMD_WIFI_SCAN

 #define RADIOLIB_LR11X0_WIFI_SCAN_802_11_B                      (0x01UL << 0)   //  7     0     Wi-Fi type to scan: 802.11b

 #define RADIOLIB_LR11X0_WIFI_SCAN_802_11_G                      (0x02UL << 0)   //  7     0                         802.11g

 #define RADIOLIB_LR11X0_WIFI_SCAN_802_11_N                      (0x03UL << 0)   //  7     0                         802.11n

 #define RADIOLIB_LR11X0_WIFI_SCAN_ALL                           (0x04UL << 0)   //  7     0                         all (802.11b first)

 #define RADIOLIB_LR11X0_WIFI_ACQ_MODE_BEACON_ONLY               (0x01UL << 0)   //  7     0     Wi-Fi acquisition mode: beacon only

 #define RADIOLIB_LR11X0_WIFI_ACQ_MODE_BEACON_PACKET             (0x02UL << 0)   //  7     0                             beacon and packet

 #define RADIOLIB_LR11X0_WIFI_ACQ_MODE_FULL_TRAFFIC              (0x03UL << 0)   //  7     0                             full traffic

 #define RADIOLIB_LR11X0_WIFI_ACQ_MODE_FULL_BEACON               (0x04UL << 0)   //  7     0                             full beacon

 #define RADIOLIB_LR11X0_WIFI_ACQ_MODE_SSID_BEACON               (0x05UL << 0)   //  7     0                             SSID beacon

 #define RADIOLIB_LR11X0_WIFI_ABORT_ON_TIMEOUT_ENABLED           (0x01UL << 0)   //  7     0     abort scanning on preamble timeout: enabled

 #define RADIOLIB_LR11X0_WIFI_ABORT_ON_TIMEOUT_DISABLED          (0x00UL << 0)   //  7     0                                         disabled

 #define RADIOLIB_LR11X0_WIFI_MAX_NUM_RESULTS                    (32)            //  7     0     maximum possible number of Wi-Fi scan results

 #define RADIOLIB_LR11X0_WIFI_ALL_CHANNELS                       (0x3FFFUL)      //  16    0     scan all channels


 // RADIOLIB_LR11X0_CMD_WIFI_READ_RESULTS

 #define RADIOLIB_LR11X0_WIFI_RESULT_TYPE_COMPLETE               (0x01UL << 0)   //  7     0     Wi-Fi scan result type: complete

 #define RADIOLIB_LR11X0_WIFI_RESULT_TYPE_BASIC                  (0x04UL << 0)   //  7     0                             basic

 #define RADIOLIB_LR11X0_WIFI_RESULT_MAX_LEN                     (79)            //  7     0     maximum possible Wi-Fi scan size

 #define RADIOLIB_LR11X0_WIFI_RESULT_MAC_LEN                     (6)             //  7     0     MAC address length in bytes

 #define RADIOLIB_LR11X0_WIFI_RESULT_SSID_LEN                    (32)            //  7     0     SSID length in bytes


 // RADIOLIB_LR11X0_CMD_GNSS_SET_CONSTELLATION_TO_USE

 #define RADIOLIB_LR11X0_GNSS_CONSTELLATION_GPS                  (0x01UL << 0)   //  7     0     GNSS constellation to use: GPS

 #define RADIOLIB_LR11X0_GNSS_CONSTELLATION_BEIDOU               (0x01UL << 1)   //  7     0                                BeiDou


 // RADIOLIB_LR11X0_CMD_GNSS_SET_MODE

 #define RADIOLIB_LR11X0_GNSS_MODE_SINGLE_SCAN                   (0x00UL << 0)   //  7     0     GNSS scanning mode: single/legacy

 #define RADIOLIB_LR11X0_GNSS_MODE_SINGLE_MULTIPLE               (0x03UL << 1)   //  7     0                         multiple/advanced


 // RADIOLIB_LR11X0_CMD_GNSS_AUTONOMOUS

 #define RADIOLIB_LR11X0_GNSS_RES_PSEUDO_DOPPLER_ENABLED         (0x01UL << 0)   //  0     0     GNSS results in NAV message: pseudo-range (in single scan mode) or Doppler information (in multiple scan mode)

 #define RADIOLIB_LR11X0_GNSS_RES_PSEUDO_DOPPLER_DISABLED        (0x00UL << 0)   //  0     0                                  not included

 #define RADIOLIB_LR11X0_GNSS_RES_DOPPLER_ENABLED                (0x01UL << 1)   //  1     1                                  Doppler information

 #define RADIOLIB_LR11X0_GNSS_RES_DOPPLER_DISABLED               (0x00UL << 1)   //  1     1                                  not included

 #define RADIOLIB_LR11X0_GNSS_NB_SV_ALL                          (0x00UL << 0)   //  7     0     include all detected satellites

 #define RADIOLIB_LR11X0_GNSS_AUTO_EFFORT_MODE                   (0x00UL << 0)   //  7     0     reserved, always 0


 // RADIOLIB_LR11X0_CMD_GNSS_ASSISTED

 #define RADIOLIB_LR11X0_GNSS_ASSIST_LOW_POWER                   (0x00UL << 0)   //  7     0     effort mode: low power

 #define RADIOLIB_LR11X0_GNSS_ASSIST_BEST_EFFORT                 (0x01UL << 0)   //  7     0                  best effort


 // RADIOLIB_LR11X0_CMD_GNSS_GET_CONTEXT_STATUS

 #define RADIOLIB_LR11X0_GNSS_CONTEXT_ERR_NONE                   (0x00UL << 0)   //  7     4     error code: none

 #define RADIOLIB_LR11X0_GNSS_CONTEXT_ERR_ALMANAC_OLD            (0x01UL << 0)   //  7     4                 almanac too old

 #define RADIOLIB_LR11X0_GNSS_CONTEXT_ERR_ALMANAC_CRC            (0x02UL << 0)   //  7     4                 almanac CRC mismatch

 #define RADIOLIB_LR11X0_GNSS_CONTEXT_ERR_FLASH                  (0x03UL << 0)   //  7     4                 flash integrity error

 #define RADIOLIB_LR11X0_GNSS_CONTEXT_ERR_ALMANAC_UPD            (0x04UL << 0)   //  7     4                 almanac update not allowed

 #define RADIOLIB_LR11X0_GNSS_CONTEXT_FREQ_SPACE_250_HZ          (0x00UL << 0)   //  8     7     frequency search space: 250 Hz

 #define RADIOLIB_LR11X0_GNSS_CONTEXT_FREQ_SPACE_500_HZ          (0x01UL << 0)   //  8     7                             500 H

 #define RADIOLIB_LR11X0_GNSS_CONTEXT_FREQ_SPACE_1000_HZ         (0x02UL << 0)   //  8     7                             1000 Hz

 #define RADIOLIB_LR11X0_GNSS_CONTEXT_FREQ_SPACE_2000_HZ         (0x03UL << 0)   //  8     7                             2000 Hz


 // RADIOLIB_LR11X0_CMD_GNSS_GET_SV_VISIBLE

 #define RADIOLIB_LR11X0_SV_CONSTELLATION_GPS                    (0x00UL << 0)   //  7     0     GNSS constellation: GPS

 #define RADIOLIB_LR11X0_SV_CONSTELLATION_BEIDOU                 (0x01UL << 0)   //  7     0                         BeiDou


 // RADIOLIB_LR11X0_CMD_GNSS_ALMANAC_FULL_UPDATE

 #define RADIOLIB_LR11X0_GNSS_ALMANAC_HEADER_ID                  (0x80UL << 0)   //  7     0     starting byte of GNSS almanac header

 #define RADIOLIB_LR11X0_GNSS_ALMANAC_BLOCK_SIZE                 (20)


 // RADIOLIB_LR11X0_CMD_CRYPTO_SET_KEY

 #define RADIOLIB_LR11X0_CRYPTO_STATUS_SUCCESS                   (0x00UL << 0)   //  7     0     crypto engine status: success

 #define RADIOLIB_LR11X0_CRYPTO_STATUS_FAIL_CMAC                 (0x01UL << 0)   //  7     0                           MIC check failed

 #define RADIOLIB_LR11X0_CRYPTO_STATUS_INV_KEY_ID                (0x03UL << 0)   //  7     0                           key/parameter source or destination ID error

 #define RADIOLIB_LR11X0_CRYPTO_STATUS_BUF_SIZE                  (0x05UL << 0)   //  7     0                           data buffer size invalid

 #define RADIOLIB_LR11X0_CRYPTO_STATUS_ERROR                     (0x06UL << 0)   //  7     0                           generic error


 // RADIOLIB_LR11X0_CMD_CRYPTO_PROCESS_JOIN_ACCEPT

 #define RADIOLIB_LR11X0_CRYPTO_LORAWAN_VERSION_1_0              (0x00UL << 0)   //  7     0     LoRaWAN version: 1.0.x

 #define RADIOLIB_LR11X0_CRYPTO_LORAWAN_VERSION_1_1              (0x01UL << 0)   //  7     0                      1.1


 // LR11X0 SPI register variables


 // RADIOLIB_LR11X0_REG_SF6_SX127X_COMPAT

 #define RADIOLIB_LR11X0_SF6_SX126X                              (0x00UL << 18)  //  18    18    SF6 mode: SX126x series

 #define RADIOLIB_LR11X0_SF6_SX127X                              (0x01UL << 18)  //  18    18              SX127x series


 // RADIOLIB_LR11X0_REG_LORA_HIGH_POWER_FIX

 #define RADIOLIB_LR11X0_LORA_HIGH_POWER_FIX                     (0x00UL << 30)  //  30    30    fix for errata


 struct LR11x0WifiResult_t {

   char type;


   uint8_t dataRateId;


   uint16_t channelFreq;


   uint8_t origin;


   bool ap;


   float rssi;


   uint8_t mac[RADIOLIB_LR11X0_WIFI_RESULT_MAC_LEN];

 };


 struct LR11x0WifiResultFull_t: public LR11x0WifiResult_t {

   uint8_t frameType;


   uint8_t frameSubType;


   bool toDistributionSystem;


   bool fromDistributionSystem;


   uint16_t phiOffset;


   uint64_t timestamp;


   uint32_t periodBeacon;

 };


 struct LR11x0WifiResultExtended_t: public LR11x0WifiResultFull_t {

   uint8_t rate;


   uint16_t service;


   uint16_t length;


   uint8_t mac0[RADIOLIB_LR11X0_WIFI_RESULT_MAC_LEN];


   uint8_t mac2[RADIOLIB_LR11X0_WIFI_RESULT_MAC_LEN];


   uint16_t seqCtrl;


   uint8_t ssid[RADIOLIB_LR11X0_WIFI_RESULT_SSID_LEN];


   uint8_t currentChannel;


   char countryCode[3];


   uint8_t ioReg;


   bool fcsCheckOk;

 };


 class LR11x0: public PhysicalLayer {

   public:

     // introduce PhysicalLayer overloads

     using PhysicalLayer::transmit;

     using PhysicalLayer::receive;

     using PhysicalLayer::startTransmit;

     using PhysicalLayer::readData;


     explicit LR11x0(Module* mod);


     bool XTAL;


     int16_t begin(float bw, uint8_t sf, uint8_t cr, uint8_t syncWord, int8_t power, uint16_t preambleLength, float tcxoVoltage);


     int16_t beginGFSK(float br, float freqDev, float rxBw, int8_t power, uint16_t preambleLength, float tcxoVoltage);


     int16_t beginLRFHSS(uint8_t bw, uint8_t cr, int8_t power, float tcxoVoltage);


     int16_t reset();


     int16_t transmit(uint8_t* data, size_t len, uint8_t addr = 0) override;


     int16_t receive(uint8_t* data, size_t len) override;


     int16_t transmitDirect(uint32_t frf = 0) override;


     int16_t receiveDirect() override;


     int16_t scanChannel() override;


     int16_t scanChannel(uint8_t symbolNum, uint8_t detPeak, uint8_t detMin);


     int16_t standby() override;


     int16_t standby(uint8_t mode, bool wakeup = true);


     int16_t sleep();


     int16_t sleep(bool retainConfig, uint32_t sleepTime);


     // interrupt methods


     void setIrqAction(void (*func)(void));


     void clearIrqAction();


     void setPacketReceivedAction(void (*func)(void)) override;


     void clearPacketReceivedAction() override;


     void setPacketSentAction(void (*func)(void)) override;


     void clearPacketSentAction() override;


     int16_t startTransmit(uint8_t* data, size_t len, uint8_t addr = 0) override;


     int16_t finishTransmit() override;


     int16_t startReceive() override;


     int16_t startReceive(uint32_t timeout, uint32_t irqFlags = RADIOLIB_LR11X0_IRQ_RX_DONE, uint32_t irqMask = 0, size_t len = 0);


     uint32_t getIrqStatus();


     int16_t readData(uint8_t* data, size_t len) override;


     int16_t startChannelScan() override;


     int16_t startChannelScan(uint8_t symbolNum, uint8_t detPeak, uint8_t detMin);


     int16_t getChannelScanResult() override;


     // configuration methods


     int16_t setOutputPower(int8_t power) override;


     int16_t setOutputPower(int8_t power, bool forceHighPower);


     int16_t checkOutputPower(int8_t power, int8_t* clipped) override;


     int16_t checkOutputPower(int8_t power, int8_t* clipped, bool forceHighPower);


     int16_t setBandwidth(float bw);


     int16_t setSpreadingFactor(uint8_t sf, bool legacy = false);


     int16_t setCodingRate(uint8_t cr, bool longInterleave = false);


     int16_t setSyncWord(uint32_t syncWord);


     int16_t setBitRate(float br) override;


     int16_t setFrequencyDeviation(float freqDev) override;


     int16_t setRxBandwidth(float rxBw);


     int16_t setSyncWord(uint8_t* syncWord, size_t len) override;


     int16_t setSyncBits(uint8_t *syncWord, uint8_t bitsLen);


     int16_t setNodeAddress(uint8_t nodeAddr);


     int16_t setBroadcastAddress(uint8_t broadAddr);


     int16_t disableAddressFiltering();


     int16_t setDataShaping(uint8_t sh) override;


     int16_t setEncoding(uint8_t encoding) override;


     int16_t fixedPacketLengthMode(uint8_t len = RADIOLIB_LR11X0_MAX_PACKET_LENGTH);


     int16_t variablePacketLengthMode(uint8_t maxLen = RADIOLIB_LR11X0_MAX_PACKET_LENGTH);


     int16_t setWhitening(bool enabled, uint16_t initial = 0x01FF);


     int16_t setDataRate(DataRate_t dr) override;


     int16_t checkDataRate(DataRate_t dr) override;


     int16_t setPreambleLength(size_t preambleLength) override;


     int16_t setTCXO(float voltage, uint32_t delay = 5000);


     int16_t setCRC(uint8_t len, uint32_t initial = 0x00001D0FUL, uint32_t polynomial = 0x00001021UL, bool inverted = true);


     int16_t invertIQ(bool enable) override;


     float getRSSI() override;


     float getSNR() override;


     float getFrequencyError();


     size_t getPacketLength(bool update = true) override;


     size_t getPacketLength(bool update, uint8_t* offset);


     RadioLibTime_t getTimeOnAir(size_t len) override;


     RadioLibTime_t calculateRxTimeout(RadioLibTime_t timeoutUs) override;


     int16_t irqRxDoneRxTimeout(uint32_t &irqFlags, uint32_t &irqMask) override;


     bool isRxTimeout() override;


     uint8_t randomByte() override;


     int16_t implicitHeader(size_t len);


     int16_t explicitHeader();


     float getDataRate() const;


     int16_t setLrFhssConfig(uint8_t bw, uint8_t cr, uint8_t hdrCount = 3, uint16_t hopSeed = 0x13A);


     int16_t startWifiScan(char wifiType, uint8_t mode = RADIOLIB_LR11X0_WIFI_ACQ_MODE_FULL_BEACON, uint16_t chanMask = RADIOLIB_LR11X0_WIFI_ALL_CHANNELS, uint8_t numScans = 16, uint16_t timeout = 100);


     void setWiFiScanAction(void (*func)(void));


     void clearWiFiScanAction();


     int16_t getWifiScanResultsCount(uint8_t* count);


     int16_t getWifiScanResult(LR11x0WifiResult_t* result, uint8_t index, bool brief = false);


     int16_t wifiScan(uint8_t wifiType, uint8_t* count, uint8_t mode = RADIOLIB_LR11X0_WIFI_ACQ_MODE_FULL_BEACON, uint16_t chanMask = RADIOLIB_LR11X0_WIFI_ALL_CHANNELS, uint8_t numScans = 16, uint16_t timeout = 100);


 #if !RADIOLIB_GODMODE && !RADIOLIB_LOW_LEVEL

   protected:

 #endif

     Module* getMod() override;


     // LR11x0 SPI command implementations

     int16_t writeRegMem32(uint32_t addr, uint32_t* data, size_t len);

     int16_t readRegMem32(uint32_t addr, uint32_t* data, size_t len);

     int16_t writeBuffer8(uint8_t* data, size_t len);

     int16_t readBuffer8(uint8_t* data, size_t len, size_t offset);

     int16_t clearRxBuffer(void);

     int16_t writeRegMemMask32(uint32_t addr, uint32_t mask, uint32_t data);


     int16_t getStatus(uint8_t* stat1, uint8_t* stat2, uint32_t* irq);

     int16_t getVersion(uint8_t* hw, uint8_t* device, uint8_t* major, uint8_t* minor);

     int16_t getErrors(uint16_t* err);

     int16_t clearErrors(void);

     int16_t calibrate(uint8_t params);

     int16_t setRegMode(uint8_t mode);

     int16_t calibImage(float freq1, float freq2);

     int16_t setDioAsRfSwitch(uint8_t en, uint8_t stbyCfg, uint8_t rxCfg, uint8_t txCfg, uint8_t txHpCfg, uint8_t txHfCfg, uint8_t gnssCfg, uint8_t wifiCfg);

     int16_t setDioIrqParams(uint32_t irq1, uint32_t irq2);

     int16_t clearIrq(uint32_t irq);

     int16_t configLfClock(uint8_t setup);

     int16_t setTcxoMode(uint8_t tune, uint32_t delay);

     int16_t reboot(bool stay);

     int16_t getVbat(float* vbat);

     int16_t getTemp(float* temp);

     int16_t setFs(void);

     int16_t getRandomNumber(uint32_t* rnd);

     int16_t eraseInfoPage(void);

     int16_t writeInfoPage(uint16_t addr, const uint32_t* data, size_t len);

     int16_t readInfoPage(uint16_t addr, uint32_t* data, size_t len);

     int16_t getChipEui(uint8_t* eui);

     int16_t getSemtechJoinEui(uint8_t* eui);

     int16_t deriveRootKeysAndGetPin(uint8_t* pin);

     int16_t enableSpiCrc(bool en);

     int16_t driveDiosInSleepMode(bool en);


     int16_t resetStats(void);

     int16_t getStats(uint16_t* nbPktReceived, uint16_t* nbPktCrcError, uint16_t* data1, uint16_t* data2);

     int16_t getPacketType(uint8_t* type);

     int16_t getRxBufferStatus(uint8_t* len, uint8_t* startOffset);

     int16_t getPacketStatusLoRa(float* rssiPkt, float* snrPkt, float* signalRssiPkt);

     int16_t getPacketStatusGFSK(float* rssiSync, float* rssiAvg, uint8_t* rxLen, uint8_t* stat);

     int16_t getRssiInst(float* rssi);

     int16_t setGfskSyncWord(uint8_t* sync);

     int16_t setLoRaPublicNetwork(bool pub);

     int16_t setRx(uint32_t timeout);

     int16_t setTx(uint32_t timeout);

     int16_t setRfFrequency(uint32_t rfFreq);

     int16_t autoTxRx(uint32_t delay, uint8_t intMode, uint32_t timeout);

     int16_t setCadParams(uint8_t symNum, uint8_t detPeak, uint8_t detMin, uint8_t cadExitMode, uint32_t timeout);

     int16_t setPacketType(uint8_t type);

     int16_t setModulationParamsLoRa(uint8_t sf, uint8_t bw, uint8_t cr, uint8_t ldro);

     int16_t setModulationParamsGFSK(uint32_t br, uint8_t sh, uint8_t rxBw, uint32_t freqDev);

     int16_t setModulationParamsLrFhss(uint32_t br, uint8_t sh);

     int16_t setModulationParamsSigfox(uint32_t br, uint8_t sh);

     int16_t setPacketParamsLoRa(uint16_t preambleLen, uint8_t hdrType, uint8_t payloadLen, uint8_t crcType, uint8_t invertIQ);

     int16_t setPacketParamsGFSK(uint16_t preambleLen, uint8_t preambleDetectorLen, uint8_t syncWordLen, uint8_t addrCmp, uint8_t packType, uint8_t payloadLen, uint8_t crcType, uint8_t whiten);

     int16_t setPacketParamsSigfox(uint8_t payloadLen, uint16_t rampUpDelay, uint16_t rampDownDelay, uint16_t bitNum);

     int16_t setTxParams(int8_t pwr, uint8_t ramp);

     int16_t setPacketAdrs(uint8_t node, uint8_t broadcast);

     int16_t setRxTxFallbackMode(uint8_t mode);

     int16_t setRxDutyCycle(uint32_t rxPeriod, uint32_t sleepPeriod, uint8_t mode);

     int16_t setPaConfig(uint8_t paSel, uint8_t regPaSupply, uint8_t paDutyCycle, uint8_t paHpSel);

     int16_t stopTimeoutOnPreamble(bool stop);

     int16_t setCad(void);

     int16_t setTxCw(void);

     int16_t setTxInfinitePreamble(void);

     int16_t setLoRaSynchTimeout(uint8_t symbolNum);

     int16_t setRangingAddr(uint32_t addr, uint8_t checkLen);

     int16_t setRangingReqAddr(uint32_t addr);

     int16_t getRangingResult(uint8_t type, float* res);

     int16_t setRangingTxRxDelay(uint32_t delay);

     int16_t setGfskCrcParams(uint32_t init, uint32_t poly);

     int16_t setGfskWhitParams(uint16_t seed);

     int16_t setRxBoosted(bool en);

     int16_t setRangingParameter(uint8_t symbolNum);

     int16_t setLoRaSyncWord(uint8_t sync);

     int16_t lrFhssBuildFrame(uint8_t hdrCount, uint8_t cr, uint8_t grid, bool hop, uint8_t bw, uint16_t hopSeq, int8_t devOffset, uint8_t* payload, size_t len);

     int16_t lrFhssSetSyncWord(uint32_t sync);

     int16_t configBleBeacon(uint8_t chan, uint8_t* payload, size_t len);

     int16_t getLoRaRxHeaderInfos(uint8_t* info);

     int16_t bleBeaconSend(uint8_t chan, uint8_t* payload, size_t len);


     int16_t wifiScan(uint8_t type, uint16_t mask, uint8_t acqMode, uint8_t nbMaxRes, uint8_t nbScanPerChan, uint16_t timeout, uint8_t abortOnTimeout);

     int16_t wifiScanTimeLimit(uint8_t type, uint16_t mask, uint8_t acqMode, uint8_t nbMaxRes, uint16_t timePerChan, uint16_t timeout);

     int16_t wifiCountryCode(uint16_t mask, uint8_t nbMaxRes, uint8_t nbScanPerChan, uint16_t timeout, uint8_t abortOnTimeout);

     int16_t wifiCountryCodeTimeLimit(uint16_t mask, uint8_t nbMaxRes, uint16_t timePerChan, uint16_t timeout);

     int16_t wifiGetNbResults(uint8_t* nbResults);

     int16_t wifiReadResults(uint8_t index, uint8_t nbResults, uint8_t format, uint8_t* results);

     int16_t wifiResetCumulTimings(void);

     int16_t wifiReadCumulTimings(uint32_t* detection, uint32_t* capture, uint32_t* demodulation);

     int16_t wifiGetNbCountryCodeResults(uint8_t* nbResults);

     int16_t wifiReadCountryCodeResults(uint8_t index, uint8_t nbResults, uint8_t* results);

     int16_t wifiCfgTimestampAPphone(uint32_t timestamp);

     int16_t wifiReadVersion(uint8_t* major, uint8_t* minor);


     int16_t gnssSetConstellationToUse(uint8_t mask);

     int16_t gnssReadConstellationToUse(uint8_t* mask);

     int16_t gnssSetAlmanacUpdate(uint8_t mask);

     int16_t gnssReadAlmanacUpdate(uint8_t* mask);

     int16_t gnssReadVersion(uint8_t* fw, uint8_t* almanac);

     int16_t gnssReadSupportedConstellations(uint8_t* mask);

     int16_t gnssSetMode(uint8_t mode);

     int16_t gnssAutonomous(uint32_t gpsTime, uint8_t resMask, uint8_t nbSvMask);

     int16_t gnssAssisted(uint32_t gpsTime, uint8_t effort, uint8_t resMask, uint8_t nbSvMask);

     int16_t gnssSetAssistancePosition(float lat, float lon);

     int16_t gnssReadAssistancePosition(float* lat, float* lon);

     int16_t gnssPushSolverMsg(uint8_t* payload, size_t len);

     int16_t gnssPushDmMsg(uint8_t* payload, size_t len);

     int16_t gnssGetContextStatus(uint8_t* fwVersion, uint32_t* almanacCrc, uint8_t* errCode, uint8_t* almUpdMask, uint8_t* freqSpace);

     int16_t gnssGetNbSvDetected(uint8_t* nbSv);

     int16_t gnssGetSvDetected(uint8_t* svId, uint8_t* snr, uint16_t* doppler, size_t nbSv);

     int16_t gnssGetConsumption(uint32_t* cpu, uint32_t* radio);

     int16_t gnssGetResultSize(uint16_t* size);

     int16_t gnssReadResults(uint8_t* result, uint16_t size);

     int16_t gnssAlmanacFullUpdateHeader(uint16_t date, uint32_t globalCrc);

     int16_t gnssAlmanacFullUpdateSV(uint8_t svn, uint8_t* svnAlmanac);

     int16_t gnssGetSvVisible(uint32_t time, float lat, float lon, uint8_t constellation, uint8_t* nbSv);


     int16_t cryptoSetKey(uint8_t keyId, uint8_t* key);

     int16_t cryptoDeriveKey(uint8_t srcKeyId, uint8_t dstKeyId, uint8_t* key);

     int16_t cryptoProcessJoinAccept(uint8_t decKeyId, uint8_t verKeyId, uint8_t lwVer, uint8_t* header, uint8_t* dataIn, size_t len, uint8_t* dataOut);

     int16_t cryptoComputeAesCmac(uint8_t keyId, uint8_t* data, size_t len, uint32_t* mic);

     int16_t cryptoVerifyAesCmac(uint8_t keyId, uint32_t micExp, uint8_t* data, size_t len, bool* result);

     int16_t cryptoAesEncrypt01(uint8_t keyId, uint8_t* dataIn, size_t len, uint8_t* dataOut);

     int16_t cryptoAesEncrypt(uint8_t keyId, uint8_t* dataIn, size_t len, uint8_t* dataOut);

     int16_t cryptoAesDecrypt(uint8_t keyId, uint8_t* dataIn, size_t len, uint8_t* dataOut);

     int16_t cryptoStoreToFlash(void);

     int16_t cryptoRestoreFromFlash(void);

     int16_t cryptoSetParam(uint8_t id, uint32_t value);

     int16_t cryptoGetParam(uint8_t id, uint32_t* value);

     int16_t cryptoCheckEncryptedFirmwareImage(uint32_t offset, uint32_t* data, size_t len);

     int16_t cryptoCheckEncryptedFirmwareImageResult(bool* result);


     int16_t bootEraseFlash(void);

     int16_t bootWriteFlashEncrypted(uint32_t offset, uint32_t* data, size_t len);

     int16_t bootReboot(bool stay);

     int16_t bootGetPin(uint8_t* pin);

     int16_t bootGetChipEui(uint8_t* eui);

     int16_t bootGetJoinEui(uint8_t* eui);


     int16_t SPIcommand(uint16_t cmd, bool write, uint8_t* data, size_t len, uint8_t* out = NULL, size_t outLen = 0);


 #if !RADIOLIB_GODMODE

   protected:

 #endif

     uint8_t chipType = 0;


 #if !RADIOLIB_GODMODE

   private:

 #endif

     Module* mod;


     // cached LoRa parameters

     uint8_t bandwidth = 0, spreadingFactor = 0, codingRate = 0, ldrOptimize = 0, crcTypeLoRa = 0, headerType = 0;

     uint16_t preambleLengthLoRa = 0;

     float bandwidthKhz = 0;

     bool ldroAuto = true;

     size_t implicitLen = 0;

     bool invertIQEnabled = false;


     // cached GFSK parameters

     uint32_t bitRate = 0, frequencyDev = 0;

     uint8_t preambleDetLength = 0, rxBandwidth = 0, pulseShape = 0, crcTypeGFSK = 0, syncWordLength = 0, addrComp = 0, whitening = 0, packetType = 0, node = 0;

     uint16_t preambleLengthGFSK = 0;


     // cached LR-FHSS parameters

     uint8_t lrFhssCr = 0, lrFhssBw = 0, lrFhssHdrCount = 0;

     uint16_t lrFhssHopSeq = 0;


     float dataRateMeasured = 0;


     uint8_t wifiScanMode = 0;


     int16_t modSetup(float tcxoVoltage, uint8_t modem);

     static int16_t SPIparseStatus(uint8_t in);

     static int16_t SPIcheckStatus(Module* mod);

     bool findChip(uint8_t ver);

     int16_t config(uint8_t modem);

     int16_t setPacketMode(uint8_t mode, uint8_t len);

     int16_t startCad(uint8_t symbolNum, uint8_t detPeak, uint8_t detMin);

     int16_t setHeaderType(uint8_t hdrType, size_t len = 0xFF);


     // common methods to avoid some copy-paste

     int16_t bleBeaconCommon(uint16_t cmd, uint8_t chan, uint8_t* payload, size_t len);

     int16_t writeCommon(uint16_t cmd, uint32_t addrOffset, const uint32_t* data, size_t len);

     int16_t cryptoCommon(uint16_t cmd, uint8_t keyId, uint8_t* dataIn, size_t len, uint8_t* dataOut);

 };


 #endif


 #endif

LR11x0
Base class for LR11x0 series. All derived classes for LR11x0 (e.g. LR1110 or LR1120) inherit from thi...
Definition: LR11x0.h:647

LR11x0::getSNR
float getSNR() override
Gets SNR (Signal to Noise Ratio) of the last received packet. Only available for LoRa modem.
Definition: LR11x0.cpp:1224

LR11x0::getIrqStatus
uint32_t getIrqStatus()
Reads the current IRQ status.
Definition: LR11x0.cpp:488

LR11x0::setDataRate
int16_t setDataRate(DataRate_t dr) override
Set data.
Definition: LR11x0.cpp:1026

LR11x0::getChannelScanResult
int16_t getChannelScanResult() override
Read the channel scan result.
Definition: LR11x0.cpp:576

LR11x0::getDataRate
float getDataRate() const
Gets effective data rate for the last transmitted packet. The value is calculated only for payload by...
Definition: LR11x0.cpp:1362

LR11x0::setRxBandwidth
int16_t setRxBandwidth(float rxBw)
Sets GFSK receiver bandwidth. Allowed values are 4.8, 5.8, 7.3, 9.7, 11.7, 14.6, 19....
Definition: LR11x0.cpp:786

LR11x0::calculateRxTimeout
RadioLibTime_t calculateRxTimeout(RadioLibTime_t timeoutUs) override
Calculate the timeout value for this specific module / series (in number of symbols or units of time)
Definition: LR11x0.cpp:1329

LR11x0::reset
int16_t reset()
Reset method. Will reset the chip to the default state using RST pin.
Definition: LR11x0.cpp:110

LR11x0::startWifiScan
int16_t startWifiScan(char wifiType, uint8_t mode=RADIOLIB_LR11X0_WIFI_ACQ_MODE_FULL_BEACON, uint16_t chanMask=RADIOLIB_LR11X0_WIFI_ALL_CHANNELS, uint8_t numScans=16, uint16_t timeout=100)
Start passive WiFi scan. BUSY pin will be de-activated when the scan is finished.
Definition: LR11x0.cpp:1387

LR11x0::readData
virtual int16_t readData(uint8_t *data, size_t len)
Reads data that was received after calling startReceive method.
Definition: PhysicalLayer.cpp:209

LR11x0::explicitHeader
int16_t explicitHeader()
Set explicit header mode for future reception/transmission.
Definition: LR11x0.cpp:1358

LR11x0::XTAL
bool XTAL
Whether the module has an XTAL (true) or TCXO (false). Defaults to false.
Definition: LR11x0.h:664

LR11x0::beginLRFHSS
int16_t beginLRFHSS(uint8_t bw, uint8_t cr, int8_t power, float tcxoVoltage)
Initialization method for LR-FHSS modem.
Definition: LR11x0.cpp:91

LR11x0::begin
int16_t begin(float bw, uint8_t sf, uint8_t cr, uint8_t syncWord, int8_t power, uint16_t preambleLength, float tcxoVoltage)
Initialization method for LoRa modem.
Definition: LR11x0.cpp:16

LR11x0::getWifiScanResult
int16_t getWifiScanResult(LR11x0WifiResult_t *result, uint8_t index, bool brief=false)
Retrieve passive WiFi scan result.
Definition: LR11x0.cpp:1446

LR11x0::setIrqAction
void setIrqAction(void(*func)(void))
Sets interrupt service routine to call when IRQ1 activates.
Definition: LR11x0.cpp:342

LR11x0::transmit
int16_t transmit(const char *str, uint8_t addr=0)
C-string transmit method.
Definition: PhysicalLayer.cpp:52

LR11x0::checkDataRate
int16_t checkDataRate(DataRate_t dr) override
Check the data rate can be configured by this module.
Definition: LR11x0.cpp:1056

LR11x0::startChannelScan
int16_t startChannelScan() override
Interrupt-driven channel activity detection method. IRQ1 will be activated when LoRa preamble is dete...
Definition: LR11x0.cpp:543

LR11x0::setCRC
int16_t setCRC(uint8_t len, uint32_t initial=0x00001D0FUL, uint32_t polynomial=0x00001021UL, bool inverted=true)
Sets CRC configuration.
Definition: LR11x0.cpp:1150

LR11x0::LR11x0
LR11x0(Module *mod)
Default constructor.
Definition: LR11x0.cpp:11

LR11x0::setCodingRate
int16_t setCodingRate(uint8_t cr, bool longInterleave=false)
Sets LoRa coding rate denominator. Allowed values range from 5 to 8.
Definition: LR11x0.cpp:700

LR11x0::setDataShaping
int16_t setDataShaping(uint8_t sh) override
Sets time-bandwidth product of Gaussian filter applied for shaping. Allowed values are RADIOLIB_SHAPI...
Definition: LR11x0.cpp:955

LR11x0::setOutputPower
int16_t setOutputPower(int8_t power) override
Sets output power. Allowed values are in range from -9 to 22 dBm (high-power PA) or -17 to 14 dBm (lo...
Definition: LR11x0.cpp:599

LR11x0::fixedPacketLengthMode
int16_t fixedPacketLengthMode(uint8_t len=RADIOLIB_LR11X0_MAX_PACKET_LENGTH)
Set modem in fixed packet length mode. Available in GFSK mode only.
Definition: LR11x0.cpp:993

LR11x0::getWifiScanResultsCount
int16_t getWifiScanResultsCount(uint8_t *count)
Get number of WiFi scan results after the scan is finished.
Definition: LR11x0.cpp:1432

LR11x0::setNodeAddress
int16_t setNodeAddress(uint8_t nodeAddr)
Sets node address. Calling this method will also enable address filtering for node address only.
Definition: LR11x0.cpp:904

LR11x0::setSyncBits
int16_t setSyncBits(uint8_t *syncWord, uint8_t bitsLen)
Sets GFSK sync word in the form of array of up to 8 bytes.
Definition: LR11x0.cpp:883

LR11x0::checkOutputPower
int16_t checkOutputPower(int8_t power, int8_t *clipped) override
Check if output power is configurable. This method is needed for compatibility with PhysicalLayer::ch...
Definition: LR11x0.cpp:622

LR11x0::scanChannel
int16_t scanChannel() override
Performs scan for LoRa transmission in the current channel. Detects both preamble and payload.
Definition: LR11x0.cpp:280

LR11x0::getRSSI
float getRSSI() override
Gets RSSI (Recorded Signal Strength Indicator) of the last received packet. Only available for LoRa o...
Definition: LR11x0.cpp:1207

LR11x0::standby
int16_t standby() override
Sets the module to standby mode (overload for PhysicalLayer compatibility, uses 13 MHz RC oscillator)...
Definition: LR11x0.cpp:298

LR11x0::setSyncWord
int16_t setSyncWord(uint32_t syncWord)
Sets LoRa or LR-FHSS sync word.
Definition: LR11x0.cpp:733

LR11x0::randomByte
uint8_t randomByte() override
Get one truly random byte from RSSI noise.
Definition: LR11x0.cpp:1348

LR11x0::setEncoding
int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Available in GFSK mode only. Serves only as alias for PhysicalLayer compa...
Definition: LR11x0.cpp:989

LR11x0::setLrFhssConfig
int16_t setLrFhssConfig(uint8_t bw, uint8_t cr, uint8_t hdrCount=3, uint16_t hopSeed=0x13A)
Sets LR-FHSS configuration.
Definition: LR11x0.cpp:1366

LR11x0::isRxTimeout
bool isRxTimeout() override
Check whether the IRQ bit for RxTimeout is set.
Definition: LR11x0.cpp:1342

LR11x0::setPacketSentAction
void setPacketSentAction(void(*func)(void)) override
Sets interrupt service routine to call when a packet is sent.
Definition: LR11x0.cpp:358

LR11x0::startTransmit
int16_t startTransmit(const char *str, uint8_t addr=0)
Interrupt-driven Arduino String transmit method. Unlike the standard transmit method,...
Definition: PhysicalLayer.cpp:149

LR11x0::clearPacketSentAction
void clearPacketSentAction() override
Clears interrupt service routine to call when a packet is sent.
Definition: LR11x0.cpp:362

LR11x0::clearPacketReceivedAction
void clearPacketReceivedAction() override
Clears interrupt service routine to call when a packet is received.
Definition: LR11x0.cpp:354

LR11x0::setTCXO
int16_t setTCXO(float voltage, uint32_t delay=5000)
Sets TCXO (Temperature Compensated Crystal Oscillator) configuration.
Definition: LR11x0.cpp:1095

LR11x0::setPreambleLength
int16_t setPreambleLength(size_t preambleLength) override
Sets preamble length for LoRa or GFSK modem. Allowed values range from 1 to 65535.
Definition: LR11x0.cpp:1078

LR11x0::startReceive
int16_t startReceive() override
Interrupt-driven receive method with default parameters. Implemented for compatibility with PhysicalL...
Definition: LR11x0.cpp:441

LR11x0::finishTransmit
int16_t finishTransmit() override
Clean up after transmission is done.
Definition: LR11x0.cpp:433

LR11x0::sleep
int16_t sleep()
Sets the module to sleep mode. To wake the device up, call standby().
Definition: LR11x0.cpp:317

LR11x0::clearIrqAction
void clearIrqAction()
Clears interrupt service routine to call when IRQ1 activates.
Definition: LR11x0.cpp:346

LR11x0::setBitRate
int16_t setBitRate(float br) override
Sets GFSK bit rate. Allowed values range from 0.6 to 300.0 kbps.
Definition: LR11x0.cpp:749

LR11x0::beginGFSK
int16_t beginGFSK(float br, float freqDev, float rxBw, int8_t power, uint16_t preambleLength, float tcxoVoltage)
Initialization method for FSK modem.
Definition: LR11x0.cpp:50

LR11x0::receive
virtual int16_t receive(uint8_t *data, size_t len)
Binary receive method. Must be implemented in module class.
Definition: PhysicalLayer.cpp:112

LR11x0::implicitHeader
int16_t implicitHeader(size_t len)
Set implicit header mode for future reception/transmission.
Definition: LR11x0.cpp:1354

LR11x0::getTimeOnAir
RadioLibTime_t getTimeOnAir(size_t len) override
Get expected time-on-air for a given size of payload.
Definition: LR11x0.cpp:1261

LR11x0::setBandwidth
int16_t setBandwidth(float bw)
Sets LoRa bandwidth. Allowed values are 62.5, 125.0, 250.0 and 500.0 kHz.
Definition: LR11x0.cpp:643

LR11x0::setFrequencyDeviation
int16_t setFrequencyDeviation(float freqDev) override
Sets GFSK frequency deviation. Allowed values range from 0.0 to 200.0 kHz.
Definition: LR11x0.cpp:766

LR11x0::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: LR11x0.cpp:1242

LR11x0::setPacketReceivedAction
void setPacketReceivedAction(void(*func)(void)) override
Sets interrupt service routine to call when a packet is received.
Definition: LR11x0.cpp:350

LR11x0::clearWiFiScanAction
void clearWiFiScanAction()
Clears interrupt service routine to call when a WiFi scan is completed.
Definition: LR11x0.cpp:1428

LR11x0::getFrequencyError
float getFrequencyError()
Gets frequency error of the latest received packet.
Definition: LR11x0.cpp:1237

LR11x0::variablePacketLengthMode
int16_t variablePacketLengthMode(uint8_t maxLen=RADIOLIB_LR11X0_MAX_PACKET_LENGTH)
Set modem in variable packet length mode. Available in GFSK mode only.
Definition: LR11x0.cpp:997

LR11x0::setWhitening
int16_t setWhitening(bool enabled, uint16_t initial=0x01FF)
Sets GFSK whitening parameters.
Definition: LR11x0.cpp:1001

LR11x0::wifiScan
int16_t wifiScan(uint8_t wifiType, uint8_t *count, uint8_t mode=RADIOLIB_LR11X0_WIFI_ACQ_MODE_FULL_BEACON, uint16_t chanMask=RADIOLIB_LR11X0_WIFI_ALL_CHANNELS, uint8_t numScans=16, uint16_t timeout=100)
Blocking WiFi scan method. Performs a full passive WiFi scan. This method may block for several secon...
Definition: LR11x0.cpp:1522

LR11x0::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf, bool legacy=false)
Sets LoRa spreading factor. Allowed values range from 5 to 12.
Definition: LR11x0.cpp:679

LR11x0::transmitDirect
int16_t transmitDirect(uint32_t frf=0) override
Starts direct mode transmission.
Definition: LR11x0.cpp:257

LR11x0::receiveDirect
int16_t receiveDirect() override
Starts direct mode reception. Only implemented for PhysicalLayer compatibility, as SX126x series does...
Definition: LR11x0.cpp:272

LR11x0::disableAddressFiltering
int16_t disableAddressFiltering()
Disables address filtering. Calling this method will also erase previously set addresses.
Definition: LR11x0.cpp:941

LR11x0::setBroadcastAddress
int16_t setBroadcastAddress(uint8_t broadAddr)
Sets broadcast address. Calling this method will also enable address filtering for node and broadcast...
Definition: LR11x0.cpp:923

LR11x0::irqRxDoneRxTimeout
int16_t irqRxDoneRxTimeout(uint32_t &irqFlags, uint32_t &irqMask) override
Create the flags that make up RxDone and RxTimeout used for receiving downlinks.
Definition: LR11x0.cpp:1336

LR11x0::invertIQ
int16_t invertIQ(bool enable) override
Enable/disable inversion of the I and Q signals.
Definition: LR11x0.cpp:1194

LR11x0::setWiFiScanAction
void setWiFiScanAction(void(*func)(void))
Sets interrupt service routine to call when a WiFi scan is completed.
Definition: LR11x0.cpp:1424

Module
Implements all common low-level methods to control the wireless module. Every module class contains o...
Definition: Module.h:68

PhysicalLayer
Provides common interface for protocols that run on LoRa/FSK modules, such as RTTY or LoRaWAN....
Definition: PhysicalLayer.h:54

PhysicalLayer::readData
virtual int16_t readData(uint8_t *data, size_t len)
Reads data that was received after calling startReceive method.
Definition: PhysicalLayer.cpp:209

PhysicalLayer::transmit
int16_t transmit(const char *str, uint8_t addr=0)
C-string transmit method.
Definition: PhysicalLayer.cpp:52

PhysicalLayer::startTransmit
int16_t startTransmit(const char *str, uint8_t addr=0)
Interrupt-driven Arduino String transmit method. Unlike the standard transmit method,...
Definition: PhysicalLayer.cpp:149

PhysicalLayer::receive
virtual int16_t receive(uint8_t *data, size_t len)
Binary receive method. Must be implemented in module class.
Definition: PhysicalLayer.cpp:112

RadioLibTime_t
unsigned long RadioLibTime_t
Type used for durations in RadioLib.
Definition: TypeDef.h:586

LR11x0WifiResult_t
Structure to save result of passive WiFi scan. This result only saves the basic information.
Definition: LR11x0.h:549

LR11x0WifiResult_t::ap
bool ap
Whether this signal was sent by an access point (true) or end device (false)
Definition: LR11x0.h:563

LR11x0WifiResult_t::channelFreq
uint16_t channelFreq
Channel frequency in MHz.
Definition: LR11x0.h:557

LR11x0WifiResult_t::type
char type
WiFi (802.11) signal type, 'b', 'n' or 'g'.
Definition: LR11x0.h:551

LR11x0WifiResult_t::mac
uint8_t mac[RADIOLIB_LR11X0_WIFI_RESULT_MAC_LEN]
MAC address.
Definition: LR11x0.h:569

LR11x0WifiResult_t::dataRateId
uint8_t dataRateId
Data rate ID holding information about modulation and coding rate. See LR11x0 user manual for details...
Definition: LR11x0.h:554

LR11x0WifiResult_t::rssi
float rssi
RSSI in dBm.
Definition: LR11x0.h:566

LR11x0WifiResult_t::origin
uint8_t origin
MAC address origin: from gateway (1), phone (2) or undetermined (3)
Definition: LR11x0.h:560

LR11x0WifiResultExtended_t
Structure to save result of passive WiFi scan. This result saves additional information alongside tha...
Definition: LR11x0.h:607

LR11x0WifiResultExtended_t::rate
uint8_t rate
Data rate. See LR11x0 user manual for details.
Definition: LR11x0.h:609

LR11x0WifiResultExtended_t::length
uint16_t length
Refer to IEEE Std 802.11, 2016, Part 11: Wireless LAN MAC and PHY Spec.
Definition: LR11x0.h:615

LR11x0WifiResultExtended_t::fcsCheckOk
bool fcsCheckOk
True if frame check sequences is valid, false otherwise.
Definition: LR11x0.h:639

LR11x0WifiResultExtended_t::service
uint16_t service
Refer to IEEE Std 802.11, 2016, Part 11: Wireless LAN MAC and PHY Spec.
Definition: LR11x0.h:612

LR11x0WifiResultExtended_t::mac2
uint8_t mac2[RADIOLIB_LR11X0_WIFI_RESULT_MAC_LEN]
MAC address 2.
Definition: LR11x0.h:621

LR11x0WifiResultExtended_t::ssid
uint8_t ssid[RADIOLIB_LR11X0_WIFI_RESULT_SSID_LEN]
SSID.
Definition: LR11x0.h:627

LR11x0WifiResultExtended_t::currentChannel
uint8_t currentChannel
WiFi channel number.
Definition: LR11x0.h:630

LR11x0WifiResultExtended_t::seqCtrl
uint16_t seqCtrl
Refer to IEEE Std 802.11, 2016, Part 11: Wireless LAN MAC and PHY Spec.
Definition: LR11x0.h:624

LR11x0WifiResultExtended_t::mac0
uint8_t mac0[RADIOLIB_LR11X0_WIFI_RESULT_MAC_LEN]
MAC address 0.
Definition: LR11x0.h:618

LR11x0WifiResultExtended_t::countryCode
char countryCode[3]
Two-letter country code (null-terminated string).
Definition: LR11x0.h:633

LR11x0WifiResultExtended_t::ioReg
uint8_t ioReg
Refer to IEEE Std 802.11, 2016, Part 11: Wireless LAN MAC and PHY Spec.
Definition: LR11x0.h:636

LR11x0WifiResultFull_t
Structure to save result of passive WiFi scan. This result saves additional information alongside tha...
Definition: LR11x0.h:577

LR11x0WifiResultFull_t::periodBeacon
uint32_t periodBeacon
Beacon period in microseconds.
Definition: LR11x0.h:597

LR11x0WifiResultFull_t::phiOffset
uint16_t phiOffset
See LR11x0 user manual for details.
Definition: LR11x0.h:591

LR11x0WifiResultFull_t::fromDistributionSystem
bool fromDistributionSystem
Frame sent from distribution system to client station.
Definition: LR11x0.h:588

LR11x0WifiResultFull_t::timestamp
uint64_t timestamp
Number of microseconds the AP has been active.
Definition: LR11x0.h:594

LR11x0WifiResultFull_t::frameType
uint8_t frameType
Frame type. See LR11x0 user manual for details.
Definition: LR11x0.h:579

LR11x0WifiResultFull_t::frameSubType
uint8_t frameSubType
Frame sub type. See LR11x0 user manual for details.
Definition: LR11x0.h:582

LR11x0WifiResultFull_t::toDistributionSystem
bool toDistributionSystem
Frame sent from client station to distribution system.
Definition: LR11x0.h:585

DataRate_t
Common data rate structure.
Definition: PhysicalLayer.h:38