/*
  RadioLib CC1101 Blocking Transmit Example

  This example transmits packets using CC1101 FSK radio module.
  Each packet contains up to 64 bytes of data, in the form of:
  - Arduino String
  - null-terminated char array (C-string)
  - arbitrary binary data (byte array)

  Using blocking transmit is not recommended, as it will lead
  to inefficient use of processor time!
  Instead, interrupt transmit is recommended.

  For default module settings, see the wiki page
  https://github.com/jgromes/RadioLib/wiki/Default-configuration#cc1101

  For full API reference, see the GitHub Pages
  https://jgromes.github.io/RadioLib/
*/

// include the library
#include <RadioLib.h>

// CC1101 has the following connections:
// CS pin:    10
// GDO0 pin:  2
// RST pin:   unused
// GDO2 pin:  3
CC1101 radio = new Module(10, 2, RADIOLIB_NC, 3);

// or using RadioShield
// https://github.com/jgromes/RadioShield
//CC1101 radio = RadioShield.ModuleA;

void setup() {
  Serial.begin(9600);

  // initialize CC1101 with default settings
  Serial.print(F("[CC1101] Initializing ... "));
  int state = radio.begin();
  if (state == RADIOLIB_ERR_NONE) {
    Serial.println(F("success!"));
  } else {
    Serial.print(F("failed, code "));
    Serial.println(state);
    while (true);
  }
}

// counter to keep track of transmitted packets
int count = 0;

void loop() {
  Serial.print(F("[CC1101] Transmitting packet ... "));

  // you can transmit C-string or Arduino string up to 63 characters long
  String str = "Hello World! #" + String(count++);
  int state = radio.transmit(str);

  // you can also transmit byte array up to 63 bytes long
  /*
    byte byteArr[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF};
    int state = radio.transmit(byteArr, 8);
  */

  if (state == RADIOLIB_ERR_NONE) {
    // the packet was successfully transmitted
    Serial.println(F("success!"));

  } else if (state == RADIOLIB_ERR_PACKET_TOO_LONG) {
    // the supplied packet was longer than 64 bytes
    Serial.println(F("too long!"));

  } else {
    // some other error occurred
    Serial.print(F("failed, code "));
    Serial.println(state);

  }

  // wait for a second before transmitting again
  delay(1000);
}