forks/RadioLibSmol
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

[SSTV] Added links to default config wiki page

Browse source
This commit is contained in:
jgromes 2020-07-04 12:03:17 +02:00
parent 92ded01234
commit ffe535c873
2 changed files with 20 additions and 27 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

24
examples/SSTV/SSTV_Transmit/SSTV_Transmit.ino
View file

@ -25,6 +25,9 @@
lower speed modes such as Wrasse, lower speed modes such as Wrasse,
Scottie1 or Martin1 are recommended. Scottie1 or Martin1 are recommended.
For default module settings, see the wiki page
https://github.com/jgromes/RadioLib/wiki/Default-configuration
For full API reference, see the GitHub Pages For full API reference, see the GitHub Pages
https://jgromes.github.io/RadioLib/ https://jgromes.github.io/RadioLib/
*/ */
@ -37,14 +40,14 @@
// DIO0 pin: 2 // DIO0 pin: 2
// RESET pin: 9 // RESET pin: 9
// DIO1 pin: 3 // DIO1 pin: 3
SX1278 fsk = new Module(10, 2, 9, 3); SX1278 radio = new Module(10, 2, 9, 3);
// or using RadioShield // or using RadioShield
// https://github.com/jgromes/RadioShield // https://github.com/jgromes/RadioShield
//SX1278 fsk = RadioShield.ModuleA; //SX1278 radio = RadioShield.ModuleA;
// create SSTV client instance using the FSK module // create SSTV client instance using the FSK module
SSTVClient sstv(&fsk); SSTVClient sstv(&radio);
// test "image" - actually just a single 320px line // test "image" - actually just a single 320px line
// will be sent over and over again, to create vertical color stripes at the receiver // will be sent over and over again, to create vertical color stripes at the receiver
@ -85,16 +88,9 @@ uint32_t line[320] = {
void setup() { void setup() {
Serial.begin(9600); Serial.begin(9600);
// initialize SX1278 // initialize SX1278 with default settings
Serial.print(F("[SX1278] Initializing ... ")); Serial.print(F("[SX1278] Initializing ... "));
// carrier frequency: 434.0 MHz int state = radio.beginFSK();
// bit rate: 48.0 kbps
// frequency deviation: 50.0 kHz
// Rx bandwidth: 125.0 kHz
// output power: 13 dBm
// current limit: 100 mA
// sync word: 0x2D 0x01
int state = fsk.beginFSK();
if (state == ERR_NONE) { if (state == ERR_NONE) {
Serial.println(F("success!")); Serial.println(F("success!"));
} else { } else {
@ -105,7 +101,7 @@ void setup() {
// when using one of the non-LoRa modules for SSTV // when using one of the non-LoRa modules for SSTV
// (RF69, SX1231 etc.), use the basic begin() method // (RF69, SX1231 etc.), use the basic begin() method
// int state = fsk.begin(); // int state = radio.begin();
// initialize SSTV client // initialize SSTV client
Serial.print(F("[SSTV] Initializing ... ")); Serial.print(F("[SSTV] Initializing ... "));
@ -152,7 +148,7 @@ void loop() {
} }
// turn off transmitter // turn off transmitter
fsk.standby(); radio.standby();
Serial.println(F("done!")); Serial.println(F("done!"));

23
examples/SSTV/SSTV_Transmit_AFSK/SSTV_Transmit_AFSK.ino
View file

@ -20,6 +20,9 @@
lower speed modes such as Wrasse, lower speed modes such as Wrasse,
Scottie1 or Martin1 are recommended. Scottie1 or Martin1 are recommended.
For default module settings, see the wiki page
https://github.com/jgromes/RadioLib/wiki/Default-configuration
For full API reference, see the GitHub Pages For full API reference, see the GitHub Pages
https://jgromes.github.io/RadioLib/ https://jgromes.github.io/RadioLib/
*/ */
@ -32,15 +35,15 @@
// DIO0 pin: 2 // DIO0 pin: 2
// RESET pin: 9 // RESET pin: 9
// DIO1 pin: 3 // DIO1 pin: 3
SX1278 fsk = new Module(10, 2, 9, 3); SX1278 radio = new Module(10, 2, 9, 3);
// or using RadioShield // or using RadioShield
// https://github.com/jgromes/RadioShield // https://github.com/jgromes/RadioShield
//SX1278 fsk = RadioShield.ModuleA; //SX1278 radio = RadioShield.ModuleA;
// create AFSK client instance using the FSK module // create AFSK client instance using the FSK module
// pin 5 is connected to SX1278 DIO2 // pin 5 is connected to SX1278 DIO2
AFSKClient audio(&fsk, 5); AFSKClient audio(&radio, 5);
// create SSTV client instance using the AFSK instance // create SSTV client instance using the AFSK instance
SSTVClient sstv(&audio); SSTVClient sstv(&audio);
@ -84,15 +87,9 @@ uint32_t line[320] = {
void setup() { void setup() {
Serial.begin(9600); Serial.begin(9600);
// initialize SX1278 // initialize SX1278 with default settings
Serial.print(F("[SX1278] Initializing ... ")); Serial.print(F("[SX1278] Initializing ... "));
// carrier frequency: 434.0 MHz int state = radio.beginFSK();
// bit rate: 48.0 kbps
// frequency deviation: 50.0 kHz
// Rx bandwidth: 125.0 kHz
// output power: 13 dBm
// current limit: 100 mA
int state = fsk.beginFSK();
if (state == ERR_NONE) { if (state == ERR_NONE) {
Serial.println(F("success!")); Serial.println(F("success!"));
} else { } else {
@ -103,7 +100,7 @@ void setup() {
// when using one of the non-LoRa modules for SSTV // when using one of the non-LoRa modules for SSTV
// (RF69, SX1231 etc.), use the basic begin() method // (RF69, SX1231 etc.), use the basic begin() method
// int state = fsk.begin(); // int state = radio.begin();
// initialize SSTV client // initialize SSTV client
Serial.print(F("[SSTV] Initializing ... ")); Serial.print(F("[SSTV] Initializing ... "));
@ -147,7 +144,7 @@ void loop() {
} }
// turn off transmitter // turn off transmitter
fsk.standby(); radio.standby();
Serial.println(F("done!")); Serial.println(F("done!"));