forks/RadioLibSmol
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

[SSTV] Added links to default config wiki page

Browse source
This commit is contained in:
jgromes 2020-07-04 12:03:17 +02:00
parent 92ded01234
commit ffe535c873
2 changed files with 20 additions and 27 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

24
examples/SSTV/SSTV_Transmit/SSTV_Transmit.ino
View file

@ -25,6 +25,9 @@
lower speed modes such as Wrasse,
Scottie1 or Martin1 are recommended.
For default module settings, see the wiki page
https://github.com/jgromes/RadioLib/wiki/Default-configuration
For full API reference, see the GitHub Pages
https://jgromes.github.io/RadioLib/
*/
@ -37,14 +40,14 @@
// DIO0 pin: 2
// RESET pin: 9
// DIO1 pin: 3
SX1278 fsk = new Module(10, 2, 9, 3);
SX1278 radio = new Module(10, 2, 9, 3);
// or using RadioShield
// https://github.com/jgromes/RadioShield
//SX1278 fsk = RadioShield.ModuleA;
//SX1278 radio = RadioShield.ModuleA;
// create SSTV client instance using the FSK module
SSTVClient sstv(&fsk);
SSTVClient sstv(&radio);
// test "image" - actually just a single 320px line
// will be sent over and over again, to create vertical color stripes at the receiver
@ -85,16 +88,9 @@ uint32_t line[320] = {
void setup() {
Serial.begin(9600);
// initialize SX1278
// initialize SX1278 with default settings
Serial.print(F("[SX1278] Initializing ... "));
// carrier frequency: 434.0 MHz
// bit rate: 48.0 kbps
// frequency deviation: 50.0 kHz
// Rx bandwidth: 125.0 kHz
// output power: 13 dBm
// current limit: 100 mA
// sync word: 0x2D 0x01
int state = fsk.beginFSK();
int state = radio.beginFSK();
if (state == ERR_NONE) {
Serial.println(F("success!"));
} else {
@ -105,7 +101,7 @@ void setup() {
// when using one of the non-LoRa modules for SSTV
// (RF69, SX1231 etc.), use the basic begin() method
// int state = fsk.begin();
// int state = radio.begin();
// initialize SSTV client
Serial.print(F("[SSTV] Initializing ... "));
@ -152,7 +148,7 @@ void loop() {
}
// turn off transmitter
fsk.standby();
radio.standby();
Serial.println(F("done!"));

23
examples/SSTV/SSTV_Transmit_AFSK/SSTV_Transmit_AFSK.ino
View file

@ -20,6 +20,9 @@
lower speed modes such as Wrasse,
Scottie1 or Martin1 are recommended.
For default module settings, see the wiki page
https://github.com/jgromes/RadioLib/wiki/Default-configuration
For full API reference, see the GitHub Pages
https://jgromes.github.io/RadioLib/
*/
@ -32,15 +35,15 @@
// DIO0 pin: 2
// RESET pin: 9
// DIO1 pin: 3
SX1278 fsk = new Module(10, 2, 9, 3);
SX1278 radio = new Module(10, 2, 9, 3);
// or using RadioShield
// https://github.com/jgromes/RadioShield
//SX1278 fsk = RadioShield.ModuleA;
//SX1278 radio = RadioShield.ModuleA;
// create AFSK client instance using the FSK module
// pin 5 is connected to SX1278 DIO2
AFSKClient audio(&fsk, 5);
AFSKClient audio(&radio, 5);
// create SSTV client instance using the AFSK instance
SSTVClient sstv(&audio);
@ -84,15 +87,9 @@ uint32_t line[320] = {
void setup() {
Serial.begin(9600);
// initialize SX1278
// initialize SX1278 with default settings
Serial.print(F("[SX1278] Initializing ... "));
// carrier frequency: 434.0 MHz
// bit rate: 48.0 kbps
// frequency deviation: 50.0 kHz
// Rx bandwidth: 125.0 kHz
// output power: 13 dBm
// current limit: 100 mA
int state = fsk.beginFSK();
int state = radio.beginFSK();
if (state == ERR_NONE) {
Serial.println(F("success!"));
} else {
@ -103,7 +100,7 @@ void setup() {
// when using one of the non-LoRa modules for SSTV
// (RF69, SX1231 etc.), use the basic begin() method
// int state = fsk.begin();
// int state = radio.begin();
// initialize SSTV client
Serial.print(F("[SSTV] Initializing ... "));
@ -147,7 +144,7 @@ void loop() {
}
// turn off transmitter
fsk.standby();
radio.standby();
Serial.println(F("done!"));