[SX126x] Added interrupt-driven ping pong example (#260)

examples/SX126x/SX126x_PingPong/SX126x_PingPong.ino

@@ -0,0 +1,159 @@
+/*
+   RadioLib SX126x Ping-Pong Example
+
+   For default module settings, see the wiki page
+   https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
+
+   For full API reference, see the GitHub Pages
+   https://jgromes.github.io/RadioLib/
+*/
+
+// include the library
+#include <RadioLib.h>
+
+// uncomment the following only on one
+// of the nodes to initiate the pings
+//#define INITIATING_NODE
+
+// SX1262 has the following connections:
+// NSS pin:   10
+// DIO1 pin:  2
+// NRST pin:  3
+// BUSY pin:  9
+SX1262 radio = new Module(10, 2, 3, 9);
+
+// or using RadioShield
+// https://github.com/jgromes/RadioShield
+//SX1262 radio = RadioShield.ModuleA;
+
+// save transmission states between loops
+int transmissionState = ERR_NONE;
+
+// flag to indicate transmission or reception state
+bool transmitFlag = false;
+
+// disable interrupt when it's not needed
+volatile bool enableInterrupt = true;
+
+// flag to indicate that a packet was sent or received
+volatile bool operationDone = false;
+
+// this function is called when a complete packet
+// is transmitted or received by the module
+// IMPORTANT: this function MUST be 'void' type
+//            and MUST NOT have any arguments!
+void setFlag(void) {
+  // check if the interrupt is enabled
+  if(!enableInterrupt) {
+    return;
+  }
+
+  // we sent aor received  packet, set the flag
+  operationDone = true;
+}
+
+void setup() {
+  Serial.begin(9600);
+
+  // initialize SX1262 with default settings
+  Serial.print(F("[SX1262] Initializing ... "));
+  int state = radio.begin();
+  if (state == ERR_NONE) {
+    Serial.println(F("success!"));
+  } else {
+    Serial.print(F("failed, code "));
+    Serial.println(state);
+    while (true);
+  }
+
+  // set the function that will be called
+  // when new packet is received
+  radio.setDio1Action(setFlag);
+
+  #if defined(INITIATING_NODE)
+    // send the first packet on this node
+    Serial.print(F("[SX1262] Sending first packet ... "));
+    transmissionState = radio.startTransmit("Hello World!");
+    transmitFlag = true;
+  #else
+    // start listening for LoRa packets on this node
+    Serial.print(F("[SX1262] Starting to listen ... "));
+    state = radio.startReceive();
+    if (state == ERR_NONE) {
+      Serial.println(F("success!"));
+    } else {
+      Serial.print(F("failed, code "));
+      Serial.println(state);
+      while (true);
+    }
+  #endif
+}
+
+void loop() {
+  // check if the previous operation finished
+  if(operationDone) {
+    // disable the interrupt service routine while
+    // processing the data
+    enableInterrupt = false;
+
+    // reset flag
+    operationDone = false;
+
+    if(transmitFlag) {
+      // the previous operation was transmission, listen for response
+      // print the result
+      if (transmissionState == ERR_NONE) {
+        // packet was successfully sent
+        Serial.println(F("transmission finished!"));
+  
+      } else {
+        Serial.print(F("failed, code "));
+        Serial.println(transmissionState);
+  
+      }
+
+      // listen for response
+      radio.startReceive();
+      transmitFlag = false;
+      
+    } else {
+      // the previous operation was reception
+      // print data and send another packet
+      String str;
+      int state = radio.readData(str);
+
+      if (state == ERR_NONE) {
+        // packet was successfully received
+        Serial.println(F("[SX1262] Received packet!"));
+      
+        // print data of the packet
+        Serial.print(F("[SX1262] Data:\t\t"));
+        Serial.println(str);
+  
+        // print RSSI (Received Signal Strength Indicator)
+        Serial.print(F("[SX1262] RSSI:\t\t"));
+        Serial.print(radio.getRSSI());
+        Serial.println(F(" dBm"));
+  
+        // print SNR (Signal-to-Noise Ratio)
+        Serial.print(F("[SX1262] SNR:\t\t"));
+        Serial.print(radio.getSNR());
+        Serial.println(F(" dB"));
+  
+      }
+
+      // wait a second before transmitting again
+      delay(1000);
+
+      // send another one
+      Serial.print(F("[SX1262] Sending another packet ... "));
+      transmissionState = radio.startTransmit("Hello World!");
+      transmitFlag = true;
+    }
+
+    // we're ready to process more packets,
+    // enable interrupt service routine
+    enableInterrupt = true;
+    
+  }
+}