[SX127x] Fix mistake in doxygen comment (#1411)
This commit is contained in:
parent
4deec953e8
commit
f2461edaec
4 changed files with 5 additions and 5 deletions
|
@ -27,7 +27,7 @@ class SX1276: public SX1278 {
|
|||
/*!
|
||||
\brief %LoRa modem initialization method. Must be called at least once from Arduino sketch to initialize the module.
|
||||
\param freq Carrier frequency in MHz. Allowed values range from 137.0 MHz to 1020.0 MHz.
|
||||
\param bw %LoRa link bandwidth in kHz. Allowed values are 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125, 250 and 500 kHz.
|
||||
\param bw %LoRa link bandwidth in kHz. Allowed values are 7.8, 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125, 250 and 500 kHz.
|
||||
\param sf %LoRa link spreading factor. Allowed values range from 6 to 12.
|
||||
\param cr %LoRa link coding rate denominator. Allowed values range from 5 to 8.
|
||||
\param syncWord %LoRa sync word. Can be used to distinguish different networks. Note that value 0x34 is reserved for LoRaWAN networks.
|
||||
|
|
|
@ -27,7 +27,7 @@ class SX1277: public SX1278 {
|
|||
/*!
|
||||
\brief %LoRa modem initialization method. Must be called at least once from Arduino sketch to initialize the module.
|
||||
\param freq Carrier frequency in MHz. Allowed values range from 137.0 MHz to 1020.0 MHz.
|
||||
\param bw %LoRa link bandwidth in kHz. Allowed values are 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125, 250 and 500 kHz.
|
||||
\param bw %LoRa link bandwidth in kHz. Allowed values are 7.8, 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125, 250 and 500 kHz.
|
||||
\param sf %LoRa link spreading factor. Allowed values range from 6 to 9.
|
||||
\param cr %LoRa link coding rate denominator. Allowed values range from 5 to 8.
|
||||
\param syncWord %LoRa sync word. Can be used to distinguish different networks. Note that value 0x34 is reserved for LoRaWAN networks.
|
||||
|
|
|
@ -118,7 +118,7 @@ class SX1278: public SX127x {
|
|||
/*!
|
||||
\brief %LoRa modem initialization method. Must be called at least once from Arduino sketch to initialize the module.
|
||||
\param freq Carrier frequency in MHz. Allowed values range from 137.0 MHz to 525.0 MHz.
|
||||
\param bw %LoRa link bandwidth in kHz. Allowed values are 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125, 250 and 500 kHz.
|
||||
\param bw %LoRa link bandwidth in kHz. Allowed values are 7.8, 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125, 250 and 500 kHz.
|
||||
\param sf %LoRa link spreading factor. Allowed values range from 6 to 12.
|
||||
\param cr %LoRa link coding rate denominator. Allowed values range from 5 to 8.
|
||||
\param syncWord %LoRa sync word. Can be used to distinguish different networks. Note that value 0x34 is reserved for LoRaWAN networks.
|
||||
|
@ -160,7 +160,7 @@ class SX1278: public SX127x {
|
|||
int16_t setFrequency(float freq) override;
|
||||
|
||||
/*!
|
||||
\brief Sets %LoRa link bandwidth. Allowed values are 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125, 250 and 500 kHz. Only available in %LoRa mode.
|
||||
\brief Sets %LoRa link bandwidth. Allowed values are 7.8, 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125, 250 and 500 kHz. Only available in %LoRa mode.
|
||||
\param bw %LoRa link bandwidth to be set in kHz.
|
||||
\returns \ref status_codes
|
||||
*/
|
||||
|
|
|
@ -27,7 +27,7 @@ class SX1279: public SX1278 {
|
|||
/*!
|
||||
\brief %LoRa modem initialization method. Must be called at least once from Arduino sketch to initialize the module.
|
||||
\param freq Carrier frequency in MHz. Allowed values range from 137.0 MHz to 960.0 MHz.
|
||||
\param bw %LoRa link bandwidth in kHz. Allowed values are 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125, 250 and 500 kHz.
|
||||
\param bw %LoRa link bandwidth in kHz. Allowed values are 7.8, 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125, 250 and 500 kHz.
|
||||
\param sf %LoRa link spreading factor. Allowed values range from 6 to 12.
|
||||
\param cr %LoRa link coding rate denominator. Allowed values range from 5 to 8.
|
||||
\param syncWord %LoRa sync word. Can be used to distinguish different networks. Note that value 0x34 is reserved for LoRaWAN networks.
|
||||
|
|
Loading…
Add table
Reference in a new issue