diff --git a/_build_opt_8h_source.html b/_build_opt_8h_source.html index b784d899..adecc4fa 100644 --- a/_build_opt_8h_source.html +++ b/_build_opt_8h_source.html @@ -156,445 +156,444 @@ $(document).ready(function(){initNavTree('_build_opt_8h_source.html',''); initRe
68  //#define RADIOLIB_EXCLUDE_SI443X
69  //#define RADIOLIB_EXCLUDE_RFM2X // dependent on RADIOLIB_EXCLUDE_SI443X
70  //#define RADIOLIB_EXCLUDE_SX127X
-
71  //#define RADIOLIB_EXCLUDE_RFM9X // dependent on RADIOLIB_EXCLUDE_SX127X
-
72  //#define RADIOLIB_EXCLUDE_SX126X
-
73  //#define RADIOLIB_EXCLUDE_STM32WLX // dependent on RADIOLIB_EXCLUDE_SX126X
-
74  //#define RADIOLIB_EXCLUDE_SX128X
-
75  //#define RADIOLIB_EXCLUDE_AFSK
-
76  //#define RADIOLIB_EXCLUDE_AX25
-
77  //#define RADIOLIB_EXCLUDE_HELLSCHREIBER
-
78  //#define RADIOLIB_EXCLUDE_MORSE
-
79  //#define RADIOLIB_EXCLUDE_RTTY
-
80  //#define RADIOLIB_EXCLUDE_SSTV
-
81  //#define RADIOLIB_EXCLUDE_DIRECT_RECEIVE
-
82 
-
83 #elif defined(__AVR__) && !(defined(ARDUINO_AVR_UNO_WIFI_REV2) || defined(ARDUINO_AVR_NANO_EVERY) || defined(ARDUINO_ARCH_MEGAAVR))
-
84  // Arduino AVR boards (except for megaAVR) - Uno, Mega etc.
-
85  #define RADIOLIB_PLATFORM "Arduino AVR"
-
86 
-
87 #elif defined(ESP8266)
-
88  // ESP8266 boards
-
89  #define RADIOLIB_PLATFORM "ESP8266"
-
90 
-
91 #elif defined(ESP32) || defined(ARDUINO_ARCH_ESP32)
-
92  #define RADIOLIB_ESP32
-
93 
-
94  // ESP32 boards
-
95  #define RADIOLIB_PLATFORM "ESP32"
-
96 
-
97  // ESP32 doesn't support tone(), but it can be emulated via LED control peripheral
-
98  #define RADIOLIB_TONE_UNSUPPORTED
-
99  #define RADIOLIB_TONE_ESP32_CHANNEL (1)
-
100 
-
101 #elif defined(ARDUINO_ARCH_STM32)
-
102  // official STM32 Arduino core (https://github.com/stm32duino/Arduino_Core_STM32)
-
103  #define RADIOLIB_PLATFORM "Arduino STM32 (official)"
-
104 
-
105 #elif defined(SAMD_SERIES)
-
106  // Adafruit SAMD boards (M0 and M4)
-
107  #define RADIOLIB_PLATFORM "Adafruit SAMD"
-
108  #define RADIOLIB_EEPROM_UNSUPPORTED
-
109 
-
110 #elif defined(ARDUINO_ARCH_SAMD)
-
111  // Arduino SAMD (Zero, MKR, etc.)
-
112  #define RADIOLIB_PLATFORM "Arduino SAMD"
-
113  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (PinMode)
-
114  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST (PinStatus)
-
115  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (PinStatus)
-
116  #define RADIOLIB_EEPROM_UNSUPPORTED
-
117 
-
118 #elif defined(__SAM3X8E__)
-
119  // Arduino Due
-
120  #define RADIOLIB_PLATFORM "Arduino Due"
-
121  #define RADIOLIB_TONE_UNSUPPORTED
-
122  #define RADIOLIB_EEPROM_UNSUPPORTED
-
123 
-
124 #elif (defined(NRF52832_XXAA) || defined(NRF52840_XXAA)) && !defined(ARDUINO_ARDUINO_NANO33BLE)
-
125  // Adafruit nRF52 boards
-
126  #define RADIOLIB_PLATFORM "Adafruit nRF52"
-
127  #define RADIOLIB_EEPROM_UNSUPPORTED
-
128 
-
129 #elif defined(ARDUINO_ARC32_TOOLS)
-
130  // Intel Curie
-
131  #define RADIOLIB_PLATFORM "Intel Curie"
-
132 
-
133 #elif defined(ARDUINO_AVR_UNO_WIFI_REV2) || defined(ARDUINO_AVR_NANO_EVERY) || defined(PORTDUINO)
-
134  // Arduino megaAVR boards - Uno Wifi Rev.2, Nano Every
-
135  #define RADIOLIB_PLATFORM "Arduino megaAVR"
-
136 
-
137 #elif defined(ARDUINO_ARCH_APOLLO3)
-
138  // Sparkfun Apollo3 boards
-
139  #define RADIOLIB_PLATFORM "Sparkfun Apollo3"
-
140  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (Arduino_PinMode)
-
141  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST (PinStatus)
-
142  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (PinStatus)
-
143 
-
144 #elif defined(ARDUINO_ARDUINO_NANO33BLE)
-
145  // Arduino Nano 33 BLE
-
146  #define RADIOLIB_PLATFORM "Arduino Nano 33 BLE"
-
147  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (PinMode)
-
148  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST (PinStatus)
-
149  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (PinStatus)
-
150  #define RADIOLIB_EEPROM_UNSUPPORTED
-
151 
-
152  // Arduino mbed OS boards have a really bad tone implementation which will crash after a couple seconds
-
153  #define RADIOLIB_TONE_UNSUPPORTED
-
154  #define RADIOLIB_MBED_TONE_OVERRIDE
-
155 
-
156 #elif defined(ARDUINO_PORTENTA_H7_M7) || defined(ARDUINO_PORTENTA_H7_M4)
-
157  // Arduino Portenta H7
-
158  #define RADIOLIB_PLATFORM "Portenta H7"
-
159  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (PinMode)
-
160  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST (PinStatus)
-
161  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (PinStatus)
-
162  #define RADIOLIB_EEPROM_UNSUPPORTED
-
163 
-
164  // Arduino mbed OS boards have a really bad tone implementation which will crash after a couple seconds
-
165  #define RADIOLIB_TONE_UNSUPPORTED
-
166  #define RADIOLIB_MBED_TONE_OVERRIDE
-
167 
-
168 #elif defined(__STM32F4__) || defined(__STM32F1__)
-
169  // Arduino STM32 core by Roger Clark (https://github.com/rogerclarkmelbourne/Arduino_STM32)
-
170  #define RADIOLIB_PLATFORM "STM32duino (unofficial)"
-
171  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (WiringPinMode)
-
172  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (ExtIntTriggerMode)
-
173 
-
174 #elif defined(ARDUINO_ARCH_MEGAAVR)
-
175  // MegaCoreX by MCUdude (https://github.com/MCUdude/MegaCoreX)
-
176  #define RADIOLIB_PLATFORM "MegaCoreX"
-
177 
-
178 #elif defined(ARDUINO_ARCH_MBED_RP2040)
-
179  // Raspberry Pi Pico (official mbed core)
-
180  #define RADIOLIB_PLATFORM "Raspberry Pi Pico"
-
181  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (PinMode)
-
182  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST (PinStatus)
-
183  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (PinStatus)
-
184  #define RADIOLIB_EEPROM_UNSUPPORTED
-
185 
-
186  // Arduino mbed OS boards have a really bad tone implementation which will crash after a couple seconds
-
187  #define RADIOLIB_TONE_UNSUPPORTED
-
188  #define RADIOLIB_MBED_TONE_OVERRIDE
-
189 
-
190 #elif defined(ARDUINO_ARCH_RP2040)
-
191  // Raspberry Pi Pico (unofficial core)
-
192  #define RADIOLIB_PLATFORM "Raspberry Pi Pico (unofficial)"
-
193  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (PinMode)
-
194  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST (PinStatus)
-
195  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (PinStatus)
-
196 
-
197 #elif defined(__ASR6501__) || defined(ARDUINO_ARCH_ASR650X) || defined(DARDUINO_ARCH_ASR6601)
-
198  // CubeCell
-
199  #define RADIOLIB_PLATFORM "CubeCell"
-
200  #define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(1000000, MSBFIRST, SPI_MODE0) // see issue #709
-
201  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (PINMODE)
-
202  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (IrqModes)
-
203 
-
204  // provide an easy access to the on-board module
-
205  #include "board-config.h"
-
206  #define RADIOLIB_BUILTIN_MODULE RADIO_NSS, RADIO_DIO_1, RADIO_RESET, RADIO_BUSY
-
207 
-
208  // CubeCell doesn't seem to define nullptr, let's do something like that now
-
209  #define nullptr NULL
-
210 
-
211  // ... and also defines pinMode() as a macro, which is by far the stupidest thing I have seen on Arduino
-
212  #undef pinMode
-
213 
-
214  // ... and uses an outdated GCC which does not support type aliases
-
215  #define RADIOLIB_TYPE_ALIAS(type, alias) typedef class type alias;
-
216 
-
217  // ... and it also has no tone(). This platform was designed by an idiot.
-
218  #define RADIOLIB_TONE_UNSUPPORTED
-
219 
-
220  // ... AND as the (hopefully) final nail in the coffin, IT F*CKING DEFINES YIELD() AS A MACRO THAT DOES NOTHING!!!
-
221  #define RADIOLIB_YIELD_UNSUPPORTED
-
222  #if defined(yield)
-
223  #undef yield
-
224  #endif
-
225 
-
226 #elif defined(RASPI)
-
227  // RaspiDuino framework (https://github.com/me-no-dev/RasPiArduino)
-
228  #define RADIOLIB_PLATFORM "RasPiArduino"
-
229 
-
230  // let's start off easy - no tone on this platform, that can happen
-
231  #define RADIOLIB_TONE_UNSUPPORTED
-
232 
-
233  // hmm, no yield either - weird on something like Raspberry PI, but sure, we can handle it
-
234  #define RADIOLIB_YIELD_UNSUPPORTED
-
235 
-
236  // aight, getting to the juicy stuff - PGM_P seems missing, that's the first time
-
237  #define PGM_P const char *
-
238 
-
239  // ... and for the grand finale, we have millis() and micros() DEFINED AS MACROS!
-
240  #if defined(millis)
-
241  #undef millis
-
242  inline unsigned long millis() { return((unsigned long)(STCV / 1000)); };
-
243  #endif
-
244 
-
245  #if defined(micros)
-
246  #undef micros
-
247  inline unsigned long micros() { return((unsigned long)(STCV)); };
-
248  #endif
-
249 
-
250 #elif defined(TEENSYDUINO)
-
251  // Teensy
-
252  #define RADIOLIB_PLATFORM "Teensy"
-
253 
-
254 #elif defined(ARDUINO_ARCH_RENESAS)
-
255  // Arduino Renesas (UNO R4)
-
256  #define RADIOLIB_PLATFORM "Arduino Renesas (UNO R4)"
-
257  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (PinMode)
-
258  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST (PinStatus)
-
259  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (PinStatus)
-
260 
-
261 #else
-
262  // other Arduino platforms not covered by the above list - this may or may not work
-
263  #define RADIOLIB_PLATFORM "Unknown Arduino"
-
264  #define RADIOLIB_UNKNOWN_PLATFORM
-
265 
-
266 #endif
-
267 
-
268  // set the default values for all macros
-
269  // these will be applied if they were not defined above
-
270  #if !defined(RADIOLIB_NC)
-
271  #define RADIOLIB_NC (0xFFFFFFFF)
-
272  #endif
-
273 
-
274  #if !defined(RADIOLIB_DEFAULT_SPI)
-
275  #define RADIOLIB_DEFAULT_SPI SPI
-
276  #endif
-
277 
-
278  #if !defined(RADIOLIB_DEFAULT_SPI_SETTINGS)
-
279  #define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
-
280  #endif
-
281 
-
282  #if !defined(RADIOLIB_NONVOLATILE)
-
283  #define RADIOLIB_NONVOLATILE PROGMEM
-
284  #endif
-
285 
-
286  #if !defined(RADIOLIB_NONVOLATILE_PTR)
-
287  #define RADIOLIB_NONVOLATILE_PTR PGM_P
-
288  #endif
-
289 
-
290  #if !defined(RADIOLIB_NONVOLATILE_READ_BYTE)
-
291  #define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
-
292  #endif
-
293 
-
294  #if !defined(RADIOLIB_NONVOLATILE_READ_DWORD)
-
295  #define RADIOLIB_NONVOLATILE_READ_DWORD(addr) pgm_read_dword(addr)
-
296  #endif
-
297 
-
298  #if !defined(RADIOLIB_TYPE_ALIAS)
-
299  #define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
-
300  #endif
-
301 
-
302  #if !defined(RADIOLIB_ARDUINOHAL_PIN_MODE_CAST)
-
303  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST
-
304  #endif
-
305 
-
306  #if !defined(RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST)
-
307  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST
-
308  #endif
-
309 
-
310  #if !defined(RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST)
-
311  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST
-
312  #endif
-
313 
-
314 #else
-
315  // generic non-Arduino platform
-
316  #define RADIOLIB_PLATFORM "Generic"
-
317 
-
318  #define RADIOLIB_NC (0xFF)
-
319  #define RADIOLIB_NONVOLATILE
-
320  #define RADIOLIB_NONVOLATILE_READ_BYTE(addr) (*((uint8_t *)(void *)(addr)))
-
321  #define RADIOLIB_NONVOLATILE_READ_DWORD(addr) (*((uint32_t *)(void *)(addr)))
-
322  #define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
-
323 
-
324  #if !defined(RADIOLIB_DEBUG_PORT)
-
325  #define RADIOLIB_DEBUG_PORT stdout
-
326  #endif
-
327 
-
328  #define DEC 10
-
329  #define HEX 16
-
330  #define OCT 8
-
331  #define BIN 2
-
332 
-
333  #include <stdint.h>
-
334 
-
335 #endif
-
336 
-
337 /*
-
338  * Uncomment to enable debug output.
-
339  * Warning: Debug output will slow down the whole system significantly.
-
340  * Also, it will result in larger compiled binary.
-
341  * Levels: debug - only main info
-
342  * verbose - full transcript of all SPI communication
-
343  */
-
344 #if !defined(RADIOLIB_DEBUG)
-
345  //#define RADIOLIB_DEBUG
-
346 #endif
-
347 #if !defined(RADIOLIB_VERBOSE)
-
348  //#define RADIOLIB_VERBOSE
-
349 #endif
-
350 
-
351 // set which output port should be used for debug output
-
352 // may be Serial port (on Arduino) or file like stdout or stderr (on generic platforms)
-
353 #if defined(RADIOLIB_BUILD_ARDUINO) && !defined(RADIOLIB_DEBUG_PORT)
-
354  #define RADIOLIB_DEBUG_PORT Serial
-
355 #endif
-
356 
-
357 /*
-
358  * Uncomment to enable "paranoid" SPI mode
-
359  * Every write to an SPI register using SPI set function will be verified by a subsequent read operation.
-
360  * This improves reliability, but slightly slows down communication.
-
361  * Note: Enabled by default.
-
362  */
-
363 #if !defined(RADIOLIB_SPI_PARANOID)
-
364  #define RADIOLIB_SPI_PARANOID
-
365 #endif
-
366 
-
367 /*
-
368  * Uncomment to enable parameter range checking
-
369  * RadioLib will check provided parameters (such as frequency) against limits determined by the device manufacturer.
-
370  * It is highly advised to keep this macro defined, removing it will allow invalid values to be set,
-
371  * possibly leading to bricked module and/or program crashing.
-
372  * Note: Enabled by default.
-
373  */
-
374 #if !defined(RADIOLIB_CHECK_PARAMS)
-
375  #define RADIOLIB_CHECK_PARAMS
-
376 #endif
-
377 
-
378 /*
-
379  * Uncomment to enable SX127x errata fix
-
380  * Warning: SX127x errata fix has been reported to cause issues with LoRa bandwidths lower than 62.5 kHz.
-
381  * It should only be enabled if you really are observing some errata-related issue.
-
382  * Note: Disabled by default.
-
383  */
-
384 #if !defined(RADIOLIB_FIX_ERRATA_SX127X)
-
385  //#define RADIOLIB_FIX_ERRATA_SX127X
-
386 #endif
-
387 
-
388 /*
-
389  * Uncomment to enable god mode - all methods and member variables in all classes will be made public, thus making them accessible from Arduino code.
-
390  * Warning: Come on, it's called GOD mode - obviously only use this if you know what you're doing.
-
391  * Failure to heed the above warning may result in bricked module.
-
392  */
-
393 #if !defined(RADIOLIB_GODMODE)
-
394  //#define RADIOLIB_GODMODE
-
395 #endif
-
396 
-
397 /*
-
398  * Uncomment to enable low-level hardware access
-
399  * This will make some hardware methods like SPI get/set accessible from the user sketch - think of it as "god mode lite"
-
400  * Warning: RadioLib won't stop you from writing invalid stuff into your device, so it's quite easy to brick your module with this.
-
401  */
-
402 #if !defined(RADIOLIB_LOW_LEVEL)
-
403  //#define RADIOLIB_LOW_LEVEL
-
404 #endif
-
405 
-
406 /*
-
407  * Uncomment to enable pre-defined modules when using RadioShield.
-
408  */
-
409 #if !defined(RADIOLIB_RADIOSHIELD)
-
410  //#define RADIOLIB_RADIOSHIELD
-
411 #endif
-
412 
-
413 /*
-
414  * Uncomment to enable interrupt-based timing control
-
415  * For details, see https://github.com/jgromes/RadioLib/wiki/Interrupt-Based-Timing
-
416  */
-
417 #if !defined(RADIOLIB_INTERRUPT_TIMING)
-
418  //#define RADIOLIB_INTERRUPT_TIMING
-
419 #endif
-
420 
-
421 /*
-
422  * Uncomment to enable static-only memory management: no dynamic allocation will be performed.
-
423  * Warning: Large static arrays will be created in some methods. It is not advised to send large packets in this mode.
-
424  */
-
425 #if !defined(RADIOLIB_STATIC_ONLY)
-
426  //#define RADIOLIB_STATIC_ONLY
-
427 #endif
-
428 
-
429 // set the size of static arrays to use
-
430 #if !defined(RADIOLIB_STATIC_ARRAY_SIZE)
-
431  #define RADIOLIB_STATIC_ARRAY_SIZE (256)
-
432 #endif
-
433 
-
434 // the base address for persistent storage
-
435 // some protocols (e.g. LoRaWAN) require a method
-
436 // to store some data persistently
-
437 // on Arduino, this will use EEPROM, on non-Arduino platform,
-
438 // it will use anything provided by the hardware abstraction layer
-
439 // RadioLib will place these starting at this address
-
440 #if !defined(RADIOLIB_HAL_PERSISTENT_STORAGE_BASE)
-
441  #define RADIOLIB_HAL_PERSISTENT_STORAGE_BASE (0)
-
442 #endif
-
443 
-
444 // the amount of space allocated to the persistent storage
-
445 #if !defined(RADIOLIB_HAL_PERSISTENT_STORAGE_SIZE)
-
446  #define RADIOLIB_HAL_PERSISTENT_STORAGE_SIZE (0x60)
-
447 #endif
-
448 
-
449 // This only compiles on STM32 boards with SUBGHZ module, but also
-
450 // include when generating docs
-
451 #if (!defined(ARDUINO_ARCH_STM32) || !defined(SUBGHZSPI_BASE)) && !defined(DOXYGEN)
-
452  #define RADIOLIB_EXCLUDE_STM32WLX
-
453 #endif
-
454 
-
455 #if defined(RADIOLIB_DEBUG)
-
456  #if defined(RADIOLIB_BUILD_ARDUINO)
-
457  #define RADIOLIB_DEBUG_PRINT(...) Module::serialPrintf(__VA_ARGS__)
-
458  #define RADIOLIB_DEBUG_PRINTLN(M, ...) Module::serialPrintf(M "\n", ##__VA_ARGS__)
-
459  #else
-
460  #if !defined(RADIOLIB_DEBUG_PRINT)
-
461  #define RADIOLIB_DEBUG_PRINT(...) fprintf(RADIOLIB_DEBUG_PORT, __VA_ARGS__)
-
462  #endif
-
463  #if !defined(RADIOLIB_DEBUG_PRINTLN)
-
464  #define RADIOLIB_DEBUG_PRINTLN(M, ...) fprintf(RADIOLIB_DEBUG_PORT, M "\n", ##__VA_ARGS__)
-
465  #endif
-
466  #endif
-
467  #define RADIOLIB_DEBUG_HEXDUMP(...) Module::hexdump(__VA_ARGS__)
-
468 #else
-
469  #define RADIOLIB_DEBUG_PRINT(...) {}
-
470  #define RADIOLIB_DEBUG_PRINTLN(...) {}
-
471  #define RADIOLIB_DEBUG_HEXDUMP(...) {}
-
472 #endif
-
473 
-
474 #if defined(RADIOLIB_VERBOSE)
-
475  #define RADIOLIB_VERBOSE_PRINT(...) RADIOLIB_DEBUG_PRINT(__VA_ARGS__)
-
476  #define RADIOLIB_VERBOSE_PRINTLN(...) RADIOLIB_DEBUG_PRINTLN(__VA_ARGS__)
-
477 #else
-
478  #define RADIOLIB_VERBOSE_PRINT(...) {}
-
479  #define RADIOLIB_VERBOSE_PRINTLN(...) {}
-
480 #endif
-
481 
-
485 #define RADIOLIB_ASSERT(STATEVAR) { if((STATEVAR) != RADIOLIB_ERR_NONE) { return(STATEVAR); } }
-
486 
-
490 #if defined(RADIOLIB_CHECK_PARAMS)
-
491  #define RADIOLIB_CHECK_RANGE(VAR, MIN, MAX, ERR) { if(!(((VAR) >= (MIN)) && ((VAR) <= (MAX)))) { return(ERR); } }
-
492 #else
-
493  #define RADIOLIB_CHECK_RANGE(VAR, MIN, MAX, ERR) {}
-
494 #endif
-
495 
-
496 #if defined(RADIOLIB_FIX_ERRATA_SX127X)
-
497  #define RADIOLIB_ERRATA_SX127X(...) { errataFix(__VA_ARGS__); }
-
498 #else
-
499  #define RADIOLIB_ERRATA_SX127X(...) {}
-
500 #endif
-
501 
-
502 // these macros are usually defined by Arduino, but some platforms undef them, so its safer to use our own
-
503 #define RADIOLIB_MIN(a,b) ((a)<(b)?(a):(b))
-
504 #define RADIOLIB_MAX(a,b) ((a)>(b)?(a):(b))
-
505 #define RADIOLIB_ABS(x) ((x)>0?(x):-(x))
-
506 
-
507 // version definitions
-
508 #define RADIOLIB_VERSION_MAJOR (0x06)
-
509 #define RADIOLIB_VERSION_MINOR (0x02)
-
510 #define RADIOLIB_VERSION_PATCH (0x00)
-
511 #define RADIOLIB_VERSION_EXTRA (0x00)
-
512 
-
513 #define RADIOLIB_VERSION ((RADIOLIB_VERSION_MAJOR << 24) | (RADIOLIB_VERSION_MINOR << 16) | (RADIOLIB_VERSION_PATCH << 8) | (RADIOLIB_VERSION_EXTRA))
-
514 
-
515 #endif
+
71  //#define RADIOLIB_EXCLUDE_SX126X
+
72  //#define RADIOLIB_EXCLUDE_STM32WLX // dependent on RADIOLIB_EXCLUDE_SX126X
+
73  //#define RADIOLIB_EXCLUDE_SX128X
+
74  //#define RADIOLIB_EXCLUDE_AFSK
+
75  //#define RADIOLIB_EXCLUDE_AX25
+
76  //#define RADIOLIB_EXCLUDE_HELLSCHREIBER
+
77  //#define RADIOLIB_EXCLUDE_MORSE
+
78  //#define RADIOLIB_EXCLUDE_RTTY
+
79  //#define RADIOLIB_EXCLUDE_SSTV
+
80  //#define RADIOLIB_EXCLUDE_DIRECT_RECEIVE
+
81 
+
82 #elif defined(__AVR__) && !(defined(ARDUINO_AVR_UNO_WIFI_REV2) || defined(ARDUINO_AVR_NANO_EVERY) || defined(ARDUINO_ARCH_MEGAAVR))
+
83  // Arduino AVR boards (except for megaAVR) - Uno, Mega etc.
+
84  #define RADIOLIB_PLATFORM "Arduino AVR"
+
85 
+
86 #elif defined(ESP8266)
+
87  // ESP8266 boards
+
88  #define RADIOLIB_PLATFORM "ESP8266"
+
89 
+
90 #elif defined(ESP32) || defined(ARDUINO_ARCH_ESP32)
+
91  #define RADIOLIB_ESP32
+
92 
+
93  // ESP32 boards
+
94  #define RADIOLIB_PLATFORM "ESP32"
+
95 
+
96  // ESP32 doesn't support tone(), but it can be emulated via LED control peripheral
+
97  #define RADIOLIB_TONE_UNSUPPORTED
+
98  #define RADIOLIB_TONE_ESP32_CHANNEL (1)
+
99 
+
100 #elif defined(ARDUINO_ARCH_STM32)
+
101  // official STM32 Arduino core (https://github.com/stm32duino/Arduino_Core_STM32)
+
102  #define RADIOLIB_PLATFORM "Arduino STM32 (official)"
+
103 
+
104 #elif defined(SAMD_SERIES)
+
105  // Adafruit SAMD boards (M0 and M4)
+
106  #define RADIOLIB_PLATFORM "Adafruit SAMD"
+
107  #define RADIOLIB_EEPROM_UNSUPPORTED
+
108 
+
109 #elif defined(ARDUINO_ARCH_SAMD)
+
110  // Arduino SAMD (Zero, MKR, etc.)
+
111  #define RADIOLIB_PLATFORM "Arduino SAMD"
+
112  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (PinMode)
+
113  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST (PinStatus)
+
114  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (PinStatus)
+
115  #define RADIOLIB_EEPROM_UNSUPPORTED
+
116 
+
117 #elif defined(__SAM3X8E__)
+
118  // Arduino Due
+
119  #define RADIOLIB_PLATFORM "Arduino Due"
+
120  #define RADIOLIB_TONE_UNSUPPORTED
+
121  #define RADIOLIB_EEPROM_UNSUPPORTED
+
122 
+
123 #elif (defined(NRF52832_XXAA) || defined(NRF52840_XXAA)) && !defined(ARDUINO_ARDUINO_NANO33BLE)
+
124  // Adafruit nRF52 boards
+
125  #define RADIOLIB_PLATFORM "Adafruit nRF52"
+
126  #define RADIOLIB_EEPROM_UNSUPPORTED
+
127 
+
128 #elif defined(ARDUINO_ARC32_TOOLS)
+
129  // Intel Curie
+
130  #define RADIOLIB_PLATFORM "Intel Curie"
+
131 
+
132 #elif defined(ARDUINO_AVR_UNO_WIFI_REV2) || defined(ARDUINO_AVR_NANO_EVERY) || defined(PORTDUINO)
+
133  // Arduino megaAVR boards - Uno Wifi Rev.2, Nano Every
+
134  #define RADIOLIB_PLATFORM "Arduino megaAVR"
+
135 
+
136 #elif defined(ARDUINO_ARCH_APOLLO3)
+
137  // Sparkfun Apollo3 boards
+
138  #define RADIOLIB_PLATFORM "Sparkfun Apollo3"
+
139  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (Arduino_PinMode)
+
140  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST (PinStatus)
+
141  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (PinStatus)
+
142 
+
143 #elif defined(ARDUINO_ARDUINO_NANO33BLE)
+
144  // Arduino Nano 33 BLE
+
145  #define RADIOLIB_PLATFORM "Arduino Nano 33 BLE"
+
146  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (PinMode)
+
147  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST (PinStatus)
+
148  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (PinStatus)
+
149  #define RADIOLIB_EEPROM_UNSUPPORTED
+
150 
+
151  // Arduino mbed OS boards have a really bad tone implementation which will crash after a couple seconds
+
152  #define RADIOLIB_TONE_UNSUPPORTED
+
153  #define RADIOLIB_MBED_TONE_OVERRIDE
+
154 
+
155 #elif defined(ARDUINO_PORTENTA_H7_M7) || defined(ARDUINO_PORTENTA_H7_M4)
+
156  // Arduino Portenta H7
+
157  #define RADIOLIB_PLATFORM "Portenta H7"
+
158  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (PinMode)
+
159  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST (PinStatus)
+
160  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (PinStatus)
+
161  #define RADIOLIB_EEPROM_UNSUPPORTED
+
162 
+
163  // Arduino mbed OS boards have a really bad tone implementation which will crash after a couple seconds
+
164  #define RADIOLIB_TONE_UNSUPPORTED
+
165  #define RADIOLIB_MBED_TONE_OVERRIDE
+
166 
+
167 #elif defined(__STM32F4__) || defined(__STM32F1__)
+
168  // Arduino STM32 core by Roger Clark (https://github.com/rogerclarkmelbourne/Arduino_STM32)
+
169  #define RADIOLIB_PLATFORM "STM32duino (unofficial)"
+
170  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (WiringPinMode)
+
171  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (ExtIntTriggerMode)
+
172 
+
173 #elif defined(ARDUINO_ARCH_MEGAAVR)
+
174  // MegaCoreX by MCUdude (https://github.com/MCUdude/MegaCoreX)
+
175  #define RADIOLIB_PLATFORM "MegaCoreX"
+
176 
+
177 #elif defined(ARDUINO_ARCH_MBED_RP2040)
+
178  // Raspberry Pi Pico (official mbed core)
+
179  #define RADIOLIB_PLATFORM "Raspberry Pi Pico"
+
180  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (PinMode)
+
181  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST (PinStatus)
+
182  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (PinStatus)
+
183  #define RADIOLIB_EEPROM_UNSUPPORTED
+
184 
+
185  // Arduino mbed OS boards have a really bad tone implementation which will crash after a couple seconds
+
186  #define RADIOLIB_TONE_UNSUPPORTED
+
187  #define RADIOLIB_MBED_TONE_OVERRIDE
+
188 
+
189 #elif defined(ARDUINO_ARCH_RP2040)
+
190  // Raspberry Pi Pico (unofficial core)
+
191  #define RADIOLIB_PLATFORM "Raspberry Pi Pico (unofficial)"
+
192  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (PinMode)
+
193  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST (PinStatus)
+
194  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (PinStatus)
+
195 
+
196 #elif defined(__ASR6501__) || defined(ARDUINO_ARCH_ASR650X) || defined(DARDUINO_ARCH_ASR6601)
+
197  // CubeCell
+
198  #define RADIOLIB_PLATFORM "CubeCell"
+
199  #define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(1000000, MSBFIRST, SPI_MODE0) // see issue #709
+
200  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (PINMODE)
+
201  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (IrqModes)
+
202 
+
203  // provide an easy access to the on-board module
+
204  #include "board-config.h"
+
205  #define RADIOLIB_BUILTIN_MODULE RADIO_NSS, RADIO_DIO_1, RADIO_RESET, RADIO_BUSY
+
206 
+
207  // CubeCell doesn't seem to define nullptr, let's do something like that now
+
208  #define nullptr NULL
+
209 
+
210  // ... and also defines pinMode() as a macro, which is by far the stupidest thing I have seen on Arduino
+
211  #undef pinMode
+
212 
+
213  // ... and uses an outdated GCC which does not support type aliases
+
214  #define RADIOLIB_TYPE_ALIAS(type, alias) typedef class type alias;
+
215 
+
216  // ... and it also has no tone(). This platform was designed by an idiot.
+
217  #define RADIOLIB_TONE_UNSUPPORTED
+
218 
+
219  // ... AND as the (hopefully) final nail in the coffin, IT F*CKING DEFINES YIELD() AS A MACRO THAT DOES NOTHING!!!
+
220  #define RADIOLIB_YIELD_UNSUPPORTED
+
221  #if defined(yield)
+
222  #undef yield
+
223  #endif
+
224 
+
225 #elif defined(RASPI)
+
226  // RaspiDuino framework (https://github.com/me-no-dev/RasPiArduino)
+
227  #define RADIOLIB_PLATFORM "RasPiArduino"
+
228 
+
229  // let's start off easy - no tone on this platform, that can happen
+
230  #define RADIOLIB_TONE_UNSUPPORTED
+
231 
+
232  // hmm, no yield either - weird on something like Raspberry PI, but sure, we can handle it
+
233  #define RADIOLIB_YIELD_UNSUPPORTED
+
234 
+
235  // aight, getting to the juicy stuff - PGM_P seems missing, that's the first time
+
236  #define PGM_P const char *
+
237 
+
238  // ... and for the grand finale, we have millis() and micros() DEFINED AS MACROS!
+
239  #if defined(millis)
+
240  #undef millis
+
241  inline unsigned long millis() { return((unsigned long)(STCV / 1000)); };
+
242  #endif
+
243 
+
244  #if defined(micros)
+
245  #undef micros
+
246  inline unsigned long micros() { return((unsigned long)(STCV)); };
+
247  #endif
+
248 
+
249 #elif defined(TEENSYDUINO)
+
250  // Teensy
+
251  #define RADIOLIB_PLATFORM "Teensy"
+
252 
+
253 #elif defined(ARDUINO_ARCH_RENESAS)
+
254  // Arduino Renesas (UNO R4)
+
255  #define RADIOLIB_PLATFORM "Arduino Renesas (UNO R4)"
+
256  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST (PinMode)
+
257  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST (PinStatus)
+
258  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST (PinStatus)
+
259 
+
260 #else
+
261  // other Arduino platforms not covered by the above list - this may or may not work
+
262  #define RADIOLIB_PLATFORM "Unknown Arduino"
+
263  #define RADIOLIB_UNKNOWN_PLATFORM
+
264 
+
265 #endif
+
266 
+
267  // set the default values for all macros
+
268  // these will be applied if they were not defined above
+
269  #if !defined(RADIOLIB_NC)
+
270  #define RADIOLIB_NC (0xFFFFFFFF)
+
271  #endif
+
272 
+
273  #if !defined(RADIOLIB_DEFAULT_SPI)
+
274  #define RADIOLIB_DEFAULT_SPI SPI
+
275  #endif
+
276 
+
277  #if !defined(RADIOLIB_DEFAULT_SPI_SETTINGS)
+
278  #define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
+
279  #endif
+
280 
+
281  #if !defined(RADIOLIB_NONVOLATILE)
+
282  #define RADIOLIB_NONVOLATILE PROGMEM
+
283  #endif
+
284 
+
285  #if !defined(RADIOLIB_NONVOLATILE_PTR)
+
286  #define RADIOLIB_NONVOLATILE_PTR PGM_P
+
287  #endif
+
288 
+
289  #if !defined(RADIOLIB_NONVOLATILE_READ_BYTE)
+
290  #define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
+
291  #endif
+
292 
+
293  #if !defined(RADIOLIB_NONVOLATILE_READ_DWORD)
+
294  #define RADIOLIB_NONVOLATILE_READ_DWORD(addr) pgm_read_dword(addr)
+
295  #endif
+
296 
+
297  #if !defined(RADIOLIB_TYPE_ALIAS)
+
298  #define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
+
299  #endif
+
300 
+
301  #if !defined(RADIOLIB_ARDUINOHAL_PIN_MODE_CAST)
+
302  #define RADIOLIB_ARDUINOHAL_PIN_MODE_CAST
+
303  #endif
+
304 
+
305  #if !defined(RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST)
+
306  #define RADIOLIB_ARDUINOHAL_PIN_STATUS_CAST
+
307  #endif
+
308 
+
309  #if !defined(RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST)
+
310  #define RADIOLIB_ARDUINOHAL_INTERRUPT_MODE_CAST
+
311  #endif
+
312 
+
313 #else
+
314  // generic non-Arduino platform
+
315  #define RADIOLIB_PLATFORM "Generic"
+
316 
+
317  #define RADIOLIB_NC (0xFF)
+
318  #define RADIOLIB_NONVOLATILE
+
319  #define RADIOLIB_NONVOLATILE_READ_BYTE(addr) (*((uint8_t *)(void *)(addr)))
+
320  #define RADIOLIB_NONVOLATILE_READ_DWORD(addr) (*((uint32_t *)(void *)(addr)))
+
321  #define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
+
322 
+
323  #if !defined(RADIOLIB_DEBUG_PORT)
+
324  #define RADIOLIB_DEBUG_PORT stdout
+
325  #endif
+
326 
+
327  #define DEC 10
+
328  #define HEX 16
+
329  #define OCT 8
+
330  #define BIN 2
+
331 
+
332  #include <stdint.h>
+
333 
+
334 #endif
+
335 
+
336 /*
+
337  * Uncomment to enable debug output.
+
338  * Warning: Debug output will slow down the whole system significantly.
+
339  * Also, it will result in larger compiled binary.
+
340  * Levels: debug - only main info
+
341  * verbose - full transcript of all SPI communication
+
342  */
+
343 #if !defined(RADIOLIB_DEBUG)
+
344  //#define RADIOLIB_DEBUG
+
345 #endif
+
346 #if !defined(RADIOLIB_VERBOSE)
+
347  //#define RADIOLIB_VERBOSE
+
348 #endif
+
349 
+
350 // set which output port should be used for debug output
+
351 // may be Serial port (on Arduino) or file like stdout or stderr (on generic platforms)
+
352 #if defined(RADIOLIB_BUILD_ARDUINO) && !defined(RADIOLIB_DEBUG_PORT)
+
353  #define RADIOLIB_DEBUG_PORT Serial
+
354 #endif
+
355 
+
356 /*
+
357  * Uncomment to enable "paranoid" SPI mode
+
358  * Every write to an SPI register using SPI set function will be verified by a subsequent read operation.
+
359  * This improves reliability, but slightly slows down communication.
+
360  * Note: Enabled by default.
+
361  */
+
362 #if !defined(RADIOLIB_SPI_PARANOID)
+
363  #define RADIOLIB_SPI_PARANOID
+
364 #endif
+
365 
+
366 /*
+
367  * Uncomment to enable parameter range checking
+
368  * RadioLib will check provided parameters (such as frequency) against limits determined by the device manufacturer.
+
369  * It is highly advised to keep this macro defined, removing it will allow invalid values to be set,
+
370  * possibly leading to bricked module and/or program crashing.
+
371  * Note: Enabled by default.
+
372  */
+
373 #if !defined(RADIOLIB_CHECK_PARAMS)
+
374  #define RADIOLIB_CHECK_PARAMS
+
375 #endif
+
376 
+
377 /*
+
378  * Uncomment to enable SX127x errata fix
+
379  * Warning: SX127x errata fix has been reported to cause issues with LoRa bandwidths lower than 62.5 kHz.
+
380  * It should only be enabled if you really are observing some errata-related issue.
+
381  * Note: Disabled by default.
+
382  */
+
383 #if !defined(RADIOLIB_FIX_ERRATA_SX127X)
+
384  //#define RADIOLIB_FIX_ERRATA_SX127X
+
385 #endif
+
386 
+
387 /*
+
388  * Uncomment to enable god mode - all methods and member variables in all classes will be made public, thus making them accessible from Arduino code.
+
389  * Warning: Come on, it's called GOD mode - obviously only use this if you know what you're doing.
+
390  * Failure to heed the above warning may result in bricked module.
+
391  */
+
392 #if !defined(RADIOLIB_GODMODE)
+
393  //#define RADIOLIB_GODMODE
+
394 #endif
+
395 
+
396 /*
+
397  * Uncomment to enable low-level hardware access
+
398  * This will make some hardware methods like SPI get/set accessible from the user sketch - think of it as "god mode lite"
+
399  * Warning: RadioLib won't stop you from writing invalid stuff into your device, so it's quite easy to brick your module with this.
+
400  */
+
401 #if !defined(RADIOLIB_LOW_LEVEL)
+
402  //#define RADIOLIB_LOW_LEVEL
+
403 #endif
+
404 
+
405 /*
+
406  * Uncomment to enable pre-defined modules when using RadioShield.
+
407  */
+
408 #if !defined(RADIOLIB_RADIOSHIELD)
+
409  //#define RADIOLIB_RADIOSHIELD
+
410 #endif
+
411 
+
412 /*
+
413  * Uncomment to enable interrupt-based timing control
+
414  * For details, see https://github.com/jgromes/RadioLib/wiki/Interrupt-Based-Timing
+
415  */
+
416 #if !defined(RADIOLIB_INTERRUPT_TIMING)
+
417  //#define RADIOLIB_INTERRUPT_TIMING
+
418 #endif
+
419 
+
420 /*
+
421  * Uncomment to enable static-only memory management: no dynamic allocation will be performed.
+
422  * Warning: Large static arrays will be created in some methods. It is not advised to send large packets in this mode.
+
423  */
+
424 #if !defined(RADIOLIB_STATIC_ONLY)
+
425  //#define RADIOLIB_STATIC_ONLY
+
426 #endif
+
427 
+
428 // set the size of static arrays to use
+
429 #if !defined(RADIOLIB_STATIC_ARRAY_SIZE)
+
430  #define RADIOLIB_STATIC_ARRAY_SIZE (256)
+
431 #endif
+
432 
+
433 // the base address for persistent storage
+
434 // some protocols (e.g. LoRaWAN) require a method
+
435 // to store some data persistently
+
436 // on Arduino, this will use EEPROM, on non-Arduino platform,
+
437 // it will use anything provided by the hardware abstraction layer
+
438 // RadioLib will place these starting at this address
+
439 #if !defined(RADIOLIB_HAL_PERSISTENT_STORAGE_BASE)
+
440  #define RADIOLIB_HAL_PERSISTENT_STORAGE_BASE (0)
+
441 #endif
+
442 
+
443 // the amount of space allocated to the persistent storage
+
444 #if !defined(RADIOLIB_HAL_PERSISTENT_STORAGE_SIZE)
+
445  #define RADIOLIB_HAL_PERSISTENT_STORAGE_SIZE (0x60)
+
446 #endif
+
447 
+
448 // This only compiles on STM32 boards with SUBGHZ module, but also
+
449 // include when generating docs
+
450 #if (!defined(ARDUINO_ARCH_STM32) || !defined(SUBGHZSPI_BASE)) && !defined(DOXYGEN)
+
451  #define RADIOLIB_EXCLUDE_STM32WLX
+
452 #endif
+
453 
+
454 #if defined(RADIOLIB_DEBUG)
+
455  #if defined(RADIOLIB_BUILD_ARDUINO)
+
456  #define RADIOLIB_DEBUG_PRINT(...) Module::serialPrintf(__VA_ARGS__)
+
457  #define RADIOLIB_DEBUG_PRINTLN(M, ...) Module::serialPrintf(M "\n", ##__VA_ARGS__)
+
458  #else
+
459  #if !defined(RADIOLIB_DEBUG_PRINT)
+
460  #define RADIOLIB_DEBUG_PRINT(...) fprintf(RADIOLIB_DEBUG_PORT, __VA_ARGS__)
+
461  #endif
+
462  #if !defined(RADIOLIB_DEBUG_PRINTLN)
+
463  #define RADIOLIB_DEBUG_PRINTLN(M, ...) fprintf(RADIOLIB_DEBUG_PORT, M "\n", ##__VA_ARGS__)
+
464  #endif
+
465  #endif
+
466  #define RADIOLIB_DEBUG_HEXDUMP(...) Module::hexdump(__VA_ARGS__)
+
467 #else
+
468  #define RADIOLIB_DEBUG_PRINT(...) {}
+
469  #define RADIOLIB_DEBUG_PRINTLN(...) {}
+
470  #define RADIOLIB_DEBUG_HEXDUMP(...) {}
+
471 #endif
+
472 
+
473 #if defined(RADIOLIB_VERBOSE)
+
474  #define RADIOLIB_VERBOSE_PRINT(...) RADIOLIB_DEBUG_PRINT(__VA_ARGS__)
+
475  #define RADIOLIB_VERBOSE_PRINTLN(...) RADIOLIB_DEBUG_PRINTLN(__VA_ARGS__)
+
476 #else
+
477  #define RADIOLIB_VERBOSE_PRINT(...) {}
+
478  #define RADIOLIB_VERBOSE_PRINTLN(...) {}
+
479 #endif
+
480 
+
484 #define RADIOLIB_ASSERT(STATEVAR) { if((STATEVAR) != RADIOLIB_ERR_NONE) { return(STATEVAR); } }
+
485 
+
489 #if defined(RADIOLIB_CHECK_PARAMS)
+
490  #define RADIOLIB_CHECK_RANGE(VAR, MIN, MAX, ERR) { if(!(((VAR) >= (MIN)) && ((VAR) <= (MAX)))) { return(ERR); } }
+
491 #else
+
492  #define RADIOLIB_CHECK_RANGE(VAR, MIN, MAX, ERR) {}
+
493 #endif
+
494 
+
495 #if defined(RADIOLIB_FIX_ERRATA_SX127X)
+
496  #define RADIOLIB_ERRATA_SX127X(...) { errataFix(__VA_ARGS__); }
+
497 #else
+
498  #define RADIOLIB_ERRATA_SX127X(...) {}
+
499 #endif
+
500 
+
501 // these macros are usually defined by Arduino, but some platforms undef them, so its safer to use our own
+
502 #define RADIOLIB_MIN(a,b) ((a)<(b)?(a):(b))
+
503 #define RADIOLIB_MAX(a,b) ((a)>(b)?(a):(b))
+
504 #define RADIOLIB_ABS(x) ((x)>0?(x):-(x))
+
505 
+
506 // version definitions
+
507 #define RADIOLIB_VERSION_MAJOR (0x06)
+
508 #define RADIOLIB_VERSION_MINOR (0x02)
+
509 #define RADIOLIB_VERSION_PATCH (0x00)
+
510 #define RADIOLIB_VERSION_EXTRA (0x00)
+
511 
+
512 #define RADIOLIB_VERSION ((RADIOLIB_VERSION_MAJOR << 24) | (RADIOLIB_VERSION_MINOR << 16) | (RADIOLIB_VERSION_PATCH << 8) | (RADIOLIB_VERSION_EXTRA))
+
513 
+
514 #endif
diff --git a/_radio_lib_8h_source.html b/_radio_lib_8h_source.html index cacffc2d..c868c32c 100644 --- a/_radio_lib_8h_source.html +++ b/_radio_lib_8h_source.html @@ -130,81 +130,78 @@ $(document).ready(function(){initNavTree('_radio_lib_8h_source.html',''); initRe
76 #include "modules/RF69/RF69.h"
77 #include "modules/RFM2x/RFM22.h"
78 #include "modules/RFM2x/RFM23.h"
-
79 #include "modules/RFM9x/RFM95.h"
-
80 #include "modules/RFM9x/RFM96.h"
-
81 #include "modules/RFM9x/RFM97.h"
-
82 #include "modules/Si443x/Si4430.h"
-
83 #include "modules/Si443x/Si4431.h"
-
84 #include "modules/Si443x/Si4432.h"
-
85 #include "modules/SX1231/SX1231.h"
-
86 #include "modules/SX126x/SX1261.h"
-
87 #include "modules/SX126x/SX1262.h"
-
88 #include "modules/SX126x/SX1268.h"
-
89 #include "modules/SX126x/STM32WLx.h"
-
90 #include "modules/SX127x/SX1272.h"
-
91 #include "modules/SX127x/SX1273.h"
-
92 #include "modules/SX127x/SX1276.h"
-
93 #include "modules/SX127x/SX1277.h"
-
94 #include "modules/SX127x/SX1278.h"
-
95 #include "modules/SX127x/SX1279.h"
-
96 #include "modules/SX128x/SX1280.h"
-
97 #include "modules/SX128x/SX1281.h"
-
98 #include "modules/SX128x/SX1282.h"
-
99 
-
100 // physical layer protocols
-
101 #include "protocols/PhysicalLayer/PhysicalLayer.h"
-
102 #include "protocols/AFSK/AFSK.h"
-
103 #include "protocols/AX25/AX25.h"
-
104 #include "protocols/Hellschreiber/Hellschreiber.h"
-
105 #include "protocols/Morse/Morse.h"
-
106 #include "protocols/Pager/Pager.h"
-
107 #include "protocols/RTTY/RTTY.h"
-
108 #include "protocols/SSTV/SSTV.h"
-
109 #include "protocols/FSK4/FSK4.h"
-
110 #include "protocols/APRS/APRS.h"
-
111 #include "protocols/ExternalRadio/ExternalRadio.h"
-
112 #include "protocols/Print/Print.h"
-
113 #include "protocols/BellModem/BellModem.h"
-
114 #include "protocols/LoRaWAN/LoRaWAN.h"
-
115 
-
116 // utilities
-
117 #include "utils/CRC.h"
-
118 #include "utils/Cryptography.h"
+
79 #include "modules/Si443x/Si4430.h"
+
80 #include "modules/Si443x/Si4431.h"
+
81 #include "modules/Si443x/Si4432.h"
+
82 #include "modules/SX1231/SX1231.h"
+
83 #include "modules/SX126x/SX1261.h"
+
84 #include "modules/SX126x/SX1262.h"
+
85 #include "modules/SX126x/SX1268.h"
+
86 #include "modules/SX126x/STM32WLx.h"
+
87 #include "modules/SX127x/SX1272.h"
+
88 #include "modules/SX127x/SX1273.h"
+
89 #include "modules/SX127x/SX1276.h"
+
90 #include "modules/SX127x/SX1277.h"
+
91 #include "modules/SX127x/SX1278.h"
+
92 #include "modules/SX127x/SX1279.h"
+
93 #include "modules/SX128x/SX1280.h"
+
94 #include "modules/SX128x/SX1281.h"
+
95 #include "modules/SX128x/SX1282.h"
+
96 
+
97 // physical layer protocols
+
98 #include "protocols/PhysicalLayer/PhysicalLayer.h"
+
99 #include "protocols/AFSK/AFSK.h"
+
100 #include "protocols/AX25/AX25.h"
+
101 #include "protocols/Hellschreiber/Hellschreiber.h"
+
102 #include "protocols/Morse/Morse.h"
+
103 #include "protocols/Pager/Pager.h"
+
104 #include "protocols/RTTY/RTTY.h"
+
105 #include "protocols/SSTV/SSTV.h"
+
106 #include "protocols/FSK4/FSK4.h"
+
107 #include "protocols/APRS/APRS.h"
+
108 #include "protocols/ExternalRadio/ExternalRadio.h"
+
109 #include "protocols/Print/Print.h"
+
110 #include "protocols/BellModem/BellModem.h"
+
111 #include "protocols/LoRaWAN/LoRaWAN.h"
+
112 
+
113 // utilities
+
114 #include "utils/CRC.h"
+
115 #include "utils/Cryptography.h"
+
116 
+
117 // only create Radio class when using RadioShield
+
118 #if defined(RADIOLIB_RADIOSHIELD)
119 
-
120 // only create Radio class when using RadioShield
-
121 #if defined(RADIOLIB_RADIOSHIELD)
-
122 
-
123 // RadioShield pin definitions
-
124 #define RADIOSHIELD_CS_A 10
-
125 #define RADIOSHIELD_IRQ_A 2
-
126 #define RADIOSHIELD_RST_A 9
-
127 #define RADIOSHIELD_GPIO_A 8
-
128 #define RADIOSHIELD_CS_B 5
-
129 #define RADIOSHIELD_IRQ_B 3
-
130 #define RADIOSHIELD_RST_B 7
-
131 #define RADIOSHIELD_GPIO_B 6
-
132 
-
139 class Radio {
-
140  public:
+
120 // RadioShield pin definitions
+
121 #define RADIOSHIELD_CS_A 10
+
122 #define RADIOSHIELD_IRQ_A 2
+
123 #define RADIOSHIELD_RST_A 9
+
124 #define RADIOSHIELD_GPIO_A 8
+
125 #define RADIOSHIELD_CS_B 5
+
126 #define RADIOSHIELD_IRQ_B 3
+
127 #define RADIOSHIELD_RST_B 7
+
128 #define RADIOSHIELD_GPIO_B 6
+
129 
+
136 class Radio {
+
137  public:
+
138 
+
139  Module* ModuleA;
+
140  Module* ModuleB;
141 
-
142  Module* ModuleA;
-
143  Module* ModuleB;
-
144 
-
148  Radio() {
-
149  ModuleA = new Module(RADIOSHIELD_CS_A, RADIOSHIELD_IRQ_A, RADIOSHIELD_RST_A, RADIOSHIELD_GPIO_A);
-
150  ModuleB = new Module(RADIOSHIELD_CS_B, RADIOSHIELD_IRQ_B, RADIOSHIELD_RST_B, RADIOSHIELD_GPIO_B);
-
151  }
-
152 
-
153 #if defined(RADIOLIB_GODMODE)
-
154  private:
-
155 #endif
-
156 
-
157 };
+
145  Radio() {
+
146  ModuleA = new Module(RADIOSHIELD_CS_A, RADIOSHIELD_IRQ_A, RADIOSHIELD_RST_A, RADIOSHIELD_GPIO_A);
+
147  ModuleB = new Module(RADIOSHIELD_CS_B, RADIOSHIELD_IRQ_B, RADIOSHIELD_RST_B, RADIOSHIELD_GPIO_B);
+
148  }
+
149 
+
150 #if defined(RADIOLIB_GODMODE)
+
151  private:
+
152 #endif
+
153 
+
154 };
+
155 
+
156 Radio RadioShield;
+
157 #endif
158 
-
159 Radio RadioShield;
-
160 #endif
-
161 
-
162 #endif
+
159 #endif
Module
Implements all common low-level methods to control the wireless module. Every module class contains o...
Definition: Module.h:31