From dc2eb523a913bd7c9f39e5dbd12644958e6ca4f3 Mon Sep 17 00:00:00 2001 From: jgromes Date: Mon, 20 Mar 2023 21:59:07 +0100 Subject: [PATCH] [SX126x] Cleanup whitespaces --- src/modules/SX126x/SX126x.cpp | 18 ++-- src/modules/SX126x/SX126x.h | 158 +++++++++++++++++----------------- 2 files changed, 88 insertions(+), 88 deletions(-) diff --git a/src/modules/SX126x/SX126x.cpp b/src/modules/SX126x/SX126x.cpp index 70115feb..71f1b55b 100644 --- a/src/modules/SX126x/SX126x.cpp +++ b/src/modules/SX126x/SX126x.cpp @@ -380,7 +380,7 @@ int16_t SX126x::directMode() { // set preamble length to the maximum to prevent SX126x from exiting Tx mode for a while state = setPreambleLength(0xFFFF); RADIOLIB_ASSERT(state); - + return(state); } @@ -388,7 +388,7 @@ int16_t SX126x::packetMode() { // set mode to standby int16_t state = standby(); RADIOLIB_ASSERT(state); - + // set preamble length to the default state = setPreambleLength(16); RADIOLIB_ASSERT(state); @@ -396,7 +396,7 @@ int16_t SX126x::packetMode() { // disable TxDone interrupt state = setDioIrqParams(RADIOLIB_SX126X_IRQ_NONE, RADIOLIB_SX126X_IRQ_NONE); RADIOLIB_ASSERT(state); - + // restore the magic registers state = _mod->SPIsetRegValue(RADIOLIB_SX126X_REG_DIOX_IN_ENABLE, RADIOLIB_SX126X_DIO3_IN_DISABLED, 3, 3); RADIOLIB_ASSERT(state); @@ -1951,15 +1951,15 @@ int16_t SX126x::config(uint8_t modem) { int16_t SX126x::SPIparseStatus(uint8_t in) { if((in & 0b00001110) == RADIOLIB_SX126X_STATUS_CMD_TIMEOUT) { - return(RADIOLIB_ERR_SPI_CMD_TIMEOUT); + return(RADIOLIB_ERR_SPI_CMD_TIMEOUT); } else if((in & 0b00001110) == RADIOLIB_SX126X_STATUS_CMD_INVALID) { - return(RADIOLIB_ERR_SPI_CMD_INVALID); + return(RADIOLIB_ERR_SPI_CMD_INVALID); } else if((in & 0b00001110) == RADIOLIB_SX126X_STATUS_CMD_FAILED) { - return(RADIOLIB_ERR_SPI_CMD_FAILED); + return(RADIOLIB_ERR_SPI_CMD_FAILED); } else if((in == 0x00) || (in == 0xFF)) { - return(RADIOLIB_ERR_CHIP_NOT_FOUND); + return(RADIOLIB_ERR_CHIP_NOT_FOUND); } - return(RADIOLIB_ERR_NONE); + return(RADIOLIB_ERR_NONE); } bool SX126x::findChip(uint8_t ver) { @@ -1986,7 +1986,7 @@ bool SX126x::findChip(uint8_t ver) { RADIOLIB_DEBUG_PRINT(F("SX126x not found! (")); RADIOLIB_DEBUG_PRINT(i + 1); RADIOLIB_DEBUG_PRINTLN(F(" of 10 tries) RADIOLIB_SX126X_REG_VERSION_STRING:")); - _mod->hexdump((uint8_t*)version, 16, RADIOLIB_SX126X_REG_VERSION_STRING); + _mod->hexdump((uint8_t*)version, 16, RADIOLIB_SX126X_REG_VERSION_STRING); RADIOLIB_DEBUG_PRINT(F("Expected string: ")); RADIOLIB_DEBUG_PRINTLN(versionBuff); #endif diff --git a/src/modules/SX126x/SX126x.h b/src/modules/SX126x/SX126x.h index aca8356b..5953adc1 100644 --- a/src/modules/SX126x/SX126x.h +++ b/src/modules/SX126x/SX126x.h @@ -947,124 +947,124 @@ class SX126x: public PhysicalLayer { size_t getPacketLength(bool update = true) override; /*! - \brief Set modem in fixed packet length mode. Available in FSK mode only. + \brief Set modem in fixed packet length mode. Available in FSK mode only. - \param len Packet length. + \param len Packet length. - \returns \ref status_codes - */ - int16_t fixedPacketLengthMode(uint8_t len = RADIOLIB_SX126X_MAX_PACKET_LENGTH); + \returns \ref status_codes + */ + int16_t fixedPacketLengthMode(uint8_t len = RADIOLIB_SX126X_MAX_PACKET_LENGTH); - /*! - \brief Set modem in variable packet length mode. Available in FSK mode only. + /*! + \brief Set modem in variable packet length mode. Available in FSK mode only. - \param len Maximum packet length. + \param len Maximum packet length. - \returns \ref status_codes - */ - int16_t variablePacketLengthMode(uint8_t maxLen = RADIOLIB_SX126X_MAX_PACKET_LENGTH); + \returns \ref status_codes + */ + int16_t variablePacketLengthMode(uint8_t maxLen = RADIOLIB_SX126X_MAX_PACKET_LENGTH); - /*! - \brief Get expected time-on-air for a given size of payload + /*! + \brief Get expected time-on-air for a given size of payload - \param len Payload length in bytes. + \param len Payload length in bytes. - \returns Expected time-on-air in microseconds. - */ - uint32_t getTimeOnAir(size_t len); + \returns Expected time-on-air in microseconds. + */ + uint32_t getTimeOnAir(size_t len); - /*! - \brief Get instantaneous RSSI value during recption of the packet. Should switch to FSK receive mode for LBT implementation. + /*! + \brief Get instantaneous RSSI value during recption of the packet. Should switch to FSK receive mode for LBT implementation. - \returns Instantaneous RSSI value in dBm, in steps of 0.5dBm - */ - float getRSSIInst(); + \returns Instantaneous RSSI value in dBm, in steps of 0.5dBm + */ + float getRSSIInst(); - /*! - \brief Set implicit header mode for future reception/transmission. + /*! + \brief Set implicit header mode for future reception/transmission. - \param len Payload length in bytes. + \param len Payload length in bytes. - \returns \ref status_codes - */ - int16_t implicitHeader(size_t len); + \returns \ref status_codes + */ + int16_t implicitHeader(size_t len); - /*! - \brief Set explicit header mode for future reception/transmission. + /*! + \brief Set explicit header mode for future reception/transmission. - \returns \ref status_codes - */ - int16_t explicitHeader(); + \returns \ref status_codes + */ + int16_t explicitHeader(); - /*! - \brief Set regulator mode to LDO. + /*! + \brief Set regulator mode to LDO. - \returns \ref status_codes - */ - int16_t setRegulatorLDO(); + \returns \ref status_codes + */ + int16_t setRegulatorLDO(); - /*! - \brief Set regulator mode to DC-DC. + /*! + \brief Set regulator mode to DC-DC. - \returns \ref status_codes - */ - int16_t setRegulatorDCDC(); + \returns \ref status_codes + */ + int16_t setRegulatorDCDC(); - /*! - \brief Sets transmission encoding. Available in FSK mode only. Serves only as alias for PhysicalLayer compatibility. + /*! + \brief Sets transmission encoding. Available in FSK mode only. Serves only as alias for PhysicalLayer compatibility. - \param encoding Encoding to be used. Set to 0 for NRZ, and 2 for whitening. + \param encoding Encoding to be used. Set to 0 for NRZ, and 2 for whitening. - \returns \ref status_codes - */ - int16_t setEncoding(uint8_t encoding) override; + \returns \ref status_codes + */ + int16_t setEncoding(uint8_t encoding) override; - /*! \copydoc Module::setRfSwitchPins */ - void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn); + /*! \copydoc Module::setRfSwitchPins */ + void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn); - /*! \copydoc Module::setRfSwitchTable */ - void setRfSwitchTable(const RADIOLIB_PIN_TYPE (&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[]); + /*! \copydoc Module::setRfSwitchTable */ + void setRfSwitchTable(const RADIOLIB_PIN_TYPE (&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[]); - /*! - \brief Forces LoRa low data rate optimization. Only available in LoRa mode. After calling this method, LDRO will always be set to - the provided value, regardless of symbol length. To re-enable automatic LDRO configuration, call SX126x::autoLDRO() + /*! + \brief Forces LoRa low data rate optimization. Only available in LoRa mode. After calling this method, LDRO will always be set to + the provided value, regardless of symbol length. To re-enable automatic LDRO configuration, call SX126x::autoLDRO() - \param enable Force LDRO to be always enabled (true) or disabled (false). + \param enable Force LDRO to be always enabled (true) or disabled (false). - \returns \ref status_codes - */ - int16_t forceLDRO(bool enable); + \returns \ref status_codes + */ + int16_t forceLDRO(bool enable); - /*! - \brief Re-enables automatic LDRO configuration. Only available in LoRa mode. After calling this method, LDRO will be enabled automatically - when symbol length exceeds 16 ms. + /*! + \brief Re-enables automatic LDRO configuration. Only available in LoRa mode. After calling this method, LDRO will be enabled automatically + when symbol length exceeds 16 ms. - \returns \ref status_codes - */ - int16_t autoLDRO(); + \returns \ref status_codes + */ + int16_t autoLDRO(); - /*! - \brief Get one truly random byte from RSSI noise. + /*! + \brief Get one truly random byte from RSSI noise. - \returns TRNG byte. - */ - uint8_t randomByte(); + \returns TRNG byte. + */ + uint8_t randomByte(); - #if !defined(RADIOLIB_EXCLUDE_DIRECT_RECEIVE) - /*! + #if !defined(RADIOLIB_EXCLUDE_DIRECT_RECEIVE) + /*! \brief Set interrupt service routine function to call when data bit is receveid in direct mode. \param func Pointer to interrupt service routine. - */ - void setDirectAction(void (*func)(void)); + */ + void setDirectAction(void (*func)(void)); - /*! + /*! \brief Function to read and process data bit in direct reception mode. \param pin Pin on which to read. - */ - void readBit(RADIOLIB_PIN_TYPE pin); - #endif + */ + void readBit(RADIOLIB_PIN_TYPE pin); + #endif /*! \brief Upload binary patch into the SX126x device RAM.