diff --git a/_c_c1101_8h_source.html b/_c_c1101_8h_source.html index 0e63af09..e470890c 100644 --- a/_c_c1101_8h_source.html +++ b/_c_c1101_8h_source.html @@ -785,55 +785,55 @@ $(document).ready(function(){initNavTree('_c_c1101_8h_source.html',''); initResi
966 
967 #endif
CC1101
Control class for CC1101 module.
Definition: CC1101.h:531
-
CC1101::setDIOMapping
int16_t setDIOMapping(uint32_t pin, uint32_t value)
Configure DIO pin mapping to get a given signal on a DIO pin (if available).
Definition: CC1101.cpp:1015
-
CC1101::setPromiscuousMode
int16_t setPromiscuousMode(bool enable=true)
Set modem in "sniff" mode: no packet filtering (e.g., no preamble, sync word, address,...
Definition: CC1101.cpp:894
-
CC1101::setFrequencyDeviation
int16_t setFrequencyDeviation(float freqDev) override
Sets frequency deviation. Allowed values range from 1.587 to 380.8 kHz.
Definition: CC1101.cpp:549
-
CC1101::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: CC1101.cpp:824
+
CC1101::setDIOMapping
int16_t setDIOMapping(uint32_t pin, uint32_t value)
Configure DIO pin mapping to get a given signal on a DIO pin (if available).
Definition: CC1101.cpp:1012
+
CC1101::setPromiscuousMode
int16_t setPromiscuousMode(bool enable=true)
Set modem in "sniff" mode: no packet filtering (e.g., no preamble, sync word, address,...
Definition: CC1101.cpp:891
+
CC1101::setFrequencyDeviation
int16_t setFrequencyDeviation(float freqDev) override
Sets frequency deviation. Allowed values range from 1.587 to 380.8 kHz.
Definition: CC1101.cpp:546
+
CC1101::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: CC1101.cpp:821
CC1101::reset
void reset()
Reset method - resets the chip using manual reset sequence (without RESET pin).
Definition: CC1101.cpp:94
-
CC1101::readBit
void readBit(uint32_t pin)
Function to read and process data bit in direct reception mode.
Definition: CC1101.cpp:1010
-
CC1101::transmitDirect
int16_t transmitDirect(uint32_t frf=0) override
Starts direct mode transmission.
Definition: CC1101.cpp:178
-
CC1101::getChipVersion
int16_t getChipVersion()
Read version SPI register. Should return CC1101_VERSION_LEGACY (0x04) or CC1101_VERSION_CURRENT (0x14...
Definition: CC1101.cpp:1001
+
CC1101::readBit
void readBit(uint32_t pin)
Function to read and process data bit in direct reception mode.
Definition: CC1101.cpp:1007
+
CC1101::transmitDirect
int16_t transmitDirect(uint32_t frf=0) override
Starts direct mode transmission.
Definition: CC1101.cpp:176
+
CC1101::getChipVersion
int16_t getChipVersion()
Read version SPI register. Should return CC1101_VERSION_LEGACY (0x04) or CC1101_VERSION_CURRENT (0x14...
Definition: CC1101.cpp:998
CC1101::readData
virtual int16_t readData(uint8_t *data, size_t len)
Reads data that was received after calling startReceive method.
Definition: PhysicalLayer.cpp:205
-
CC1101::setRxBandwidth
int16_t setRxBandwidth(float rxBw)
Sets receiver bandwidth. Allowed values range from 58.0 to 812.0 kHz.
Definition: CC1101.cpp:528
-
CC1101::packetMode
int16_t packetMode()
Stops direct mode. It is required to call this method to switch from direct transmissions to packet-b...
Definition: CC1101.cpp:229
-
CC1101::setSyncWord
int16_t setSyncWord(uint8_t syncH, uint8_t syncL, uint8_t maxErrBits=0, bool requireCarrierSense=false)
Sets 16-bit sync word as a two byte value.
Definition: CC1101.cpp:700
-
CC1101::getRSSI
float getRSSI()
Gets RSSI (Recorded Signal Strength Indicator) of the last received packet. In asynchronous direct mo...
Definition: CC1101.cpp:797
+
CC1101::setRxBandwidth
int16_t setRxBandwidth(float rxBw)
Sets receiver bandwidth. Allowed values range from 58.0 to 812.0 kHz.
Definition: CC1101.cpp:525
+
CC1101::packetMode
int16_t packetMode()
Stops direct mode. It is required to call this method to switch from direct transmissions to packet-b...
Definition: CC1101.cpp:227
+
CC1101::setSyncWord
int16_t setSyncWord(uint8_t syncH, uint8_t syncL, uint8_t maxErrBits=0, bool requireCarrierSense=false)
Sets 16-bit sync word as a two byte value.
Definition: CC1101.cpp:697
+
CC1101::getRSSI
float getRSSI()
Gets RSSI (Recorded Signal Strength Indicator) of the last received packet. In asynchronous direct mo...
Definition: CC1101.cpp:794
CC1101::transmit
int16_t transmit(const char *str, uint8_t addr=0)
C-string transmit method.
Definition: PhysicalLayer.cpp:52
-
CC1101::disableSyncWordFiltering
int16_t disableSyncWordFiltering(bool requireCarrierSense=false)
Disable preamble and sync word filtering and generation.
Definition: CC1101.cpp:879
-
CC1101::setOutputPower
int16_t setOutputPower(int8_t pwr)
Sets output power. Allowed values are -30, -20, -15, -10, 0, 5, 7 or 10 dBm.
Definition: CC1101.cpp:601
-
CC1101::variablePacketLengthMode
int16_t variablePacketLengthMode(uint8_t maxLen=RADIOLIB_CC1101_MAX_PACKET_LENGTH)
Set modem in variable packet length mode.
Definition: CC1101.cpp:856
-
CC1101::setDirectAction
void setDirectAction(void(*func)(void))
Set interrupt service routine function to call when data bit is receveid in direct mode.
Definition: CC1101.cpp:1006
-
CC1101::getLQI
uint8_t getLQI() const
Gets LQI (Link Quality Indicator) of the last received packet.
Definition: CC1101.cpp:820
-
CC1101::setRfSwitchPins
void setRfSwitchPins(uint32_t rxEn, uint32_t txEn)
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: CC1101.cpp:973
-
CC1101::setCrcFiltering
int16_t setCrcFiltering(bool enable=true)
Enable CRC filtering and generation.
Definition: CC1101.cpp:884
+
CC1101::disableSyncWordFiltering
int16_t disableSyncWordFiltering(bool requireCarrierSense=false)
Disable preamble and sync word filtering and generation.
Definition: CC1101.cpp:876
+
CC1101::setOutputPower
int16_t setOutputPower(int8_t pwr)
Sets output power. Allowed values are -30, -20, -15, -10, 0, 5, 7 or 10 dBm.
Definition: CC1101.cpp:598
+
CC1101::variablePacketLengthMode
int16_t variablePacketLengthMode(uint8_t maxLen=RADIOLIB_CC1101_MAX_PACKET_LENGTH)
Set modem in variable packet length mode.
Definition: CC1101.cpp:853
+
CC1101::setDirectAction
void setDirectAction(void(*func)(void))
Set interrupt service routine function to call when data bit is receveid in direct mode.
Definition: CC1101.cpp:1003
+
CC1101::getLQI
uint8_t getLQI() const
Gets LQI (Link Quality Indicator) of the last received packet.
Definition: CC1101.cpp:817
+
CC1101::setRfSwitchPins
void setRfSwitchPins(uint32_t rxEn, uint32_t txEn)
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: CC1101.cpp:970
+
CC1101::setCrcFiltering
int16_t setCrcFiltering(bool enable=true)
Enable CRC filtering and generation.
Definition: CC1101.cpp:881
CC1101::CC1101
CC1101(Module *module)
Default constructor.
Definition: CC1101.cpp:5
-
CC1101::setNodeAddress
int16_t setNodeAddress(uint8_t nodeAddr, uint8_t numBroadcastAddrs=0)
Sets node and broadcast addresses. Calling this method will also enable address filtering.
Definition: CC1101.cpp:747
-
CC1101::enableSyncWordFiltering
int16_t enableSyncWordFiltering(uint8_t maxErrBits=0, bool requireCarrierSense=false)
Enable sync word filtering and generation.
Definition: CC1101.cpp:860
-
CC1101::standby
int16_t standby() override
Sets the module to standby mode.
Definition: CC1101.cpp:164
-
CC1101::setRfSwitchTable
void setRfSwitchTable(const uint32_t(&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[])
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: CC1101.cpp:977
-
CC1101::randomByte
uint8_t randomByte()
Get one truly random byte from RSSI noise.
Definition: CC1101.cpp:981
+
CC1101::setNodeAddress
int16_t setNodeAddress(uint8_t nodeAddr, uint8_t numBroadcastAddrs=0)
Sets node and broadcast addresses. Calling this method will also enable address filtering.
Definition: CC1101.cpp:744
+
CC1101::enableSyncWordFiltering
int16_t enableSyncWordFiltering(uint8_t maxErrBits=0, bool requireCarrierSense=false)
Enable sync word filtering and generation.
Definition: CC1101.cpp:857
+
CC1101::standby
int16_t standby() override
Sets the module to standby mode.
Definition: CC1101.cpp:162
+
CC1101::setRfSwitchTable
void setRfSwitchTable(const uint32_t(&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[])
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: CC1101.cpp:974
+
CC1101::randomByte
uint8_t randomByte()
Get one truly random byte from RSSI noise.
Definition: CC1101.cpp:978
CC1101::startTransmit
int16_t startTransmit(const char *str, uint8_t addr=0)
Interrupt-driven Arduino String transmit method. Unlike the standard transmit method,...
Definition: PhysicalLayer.cpp:145
-
CC1101::setFrequency
int16_t setFrequency(float freq)
Sets carrier frequency. Allowed values are in bands 300.0 to 348.0 MHz, 387.0 to 464....
Definition: CC1101.cpp:482
-
CC1101::disableAddressFiltering
int16_t disableAddressFiltering()
Disables address filtering. Calling this method will also erase previously set addresses.
Definition: CC1101.cpp:758
-
CC1101::setGdo0Action
void setGdo0Action(void(*func)(void), uint32_t dir)
Sets interrupt service routine to call when GDO0 activates.
Definition: CC1101.cpp:236
-
CC1101::receiveDirectAsync
int16_t receiveDirectAsync()
Starts asynchronous direct mode reception.
Definition: CC1101.cpp:212
-
CC1101::setBitRate
int16_t setBitRate(float br)
Sets bit rate. Allowed values range from 0.025 to 600.0 kbps.
Definition: CC1101.cpp:508
-
CC1101::receiveDirect
int16_t receiveDirect() override
Starts direct mode reception.
Definition: CC1101.cpp:208
-
CC1101::setEncoding
int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Allowed values are RADIOLIB_ENCODING_NRZ, RADIOLIB_ENCODING_MANCHESTER,...
Definition: CC1101.cpp:949
-
CC1101::clearGdo0Action
void clearGdo0Action()
Clears interrupt service routine to call when GDO0 activates.
Definition: CC1101.cpp:240
+
CC1101::setFrequency
int16_t setFrequency(float freq)
Sets carrier frequency. Allowed values are in bands 300.0 to 348.0 MHz, 387.0 to 464....
Definition: CC1101.cpp:479
+
CC1101::disableAddressFiltering
int16_t disableAddressFiltering()
Disables address filtering. Calling this method will also erase previously set addresses.
Definition: CC1101.cpp:755
+
CC1101::setGdo0Action
void setGdo0Action(void(*func)(void), uint32_t dir)
Sets interrupt service routine to call when GDO0 activates.
Definition: CC1101.cpp:234
+
CC1101::receiveDirectAsync
int16_t receiveDirectAsync()
Starts asynchronous direct mode reception.
Definition: CC1101.cpp:210
+
CC1101::setBitRate
int16_t setBitRate(float br)
Sets bit rate. Allowed values range from 0.025 to 600.0 kbps.
Definition: CC1101.cpp:505
+
CC1101::receiveDirect
int16_t receiveDirect() override
Starts direct mode reception.
Definition: CC1101.cpp:206
+
CC1101::setEncoding
int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Allowed values are RADIOLIB_ENCODING_NRZ, RADIOLIB_ENCODING_MANCHESTER,...
Definition: CC1101.cpp:946
+
CC1101::clearGdo0Action
void clearGdo0Action()
Clears interrupt service routine to call when GDO0 activates.
Definition: CC1101.cpp:238
CC1101::receive
virtual int16_t receive(uint8_t *data, size_t len)
Binary receive method. Must be implemented in module class.
Definition: PhysicalLayer.cpp:112
-
CC1101::getFrequencyDeviation
int16_t getFrequencyDeviation(float *freqDev)
Gets frequency deviation.
Definition: CC1101.cpp:576
-
CC1101::clearGdo2Action
void clearGdo2Action()
Clears interrupt service routine to call when GDO0 activates.
Definition: CC1101.cpp:252
-
CC1101::fixedPacketLengthMode
int16_t fixedPacketLengthMode(uint8_t len=RADIOLIB_CC1101_MAX_PACKET_LENGTH)
Set modem in fixed packet length mode.
Definition: CC1101.cpp:846
-
CC1101::setGdo2Action
void setGdo2Action(void(*func)(void), uint32_t dir)
Sets interrupt service routine to call when GDO2 activates.
Definition: CC1101.cpp:244
+
CC1101::getFrequencyDeviation
int16_t getFrequencyDeviation(float *freqDev)
Gets frequency deviation.
Definition: CC1101.cpp:573
+
CC1101::clearGdo2Action
void clearGdo2Action()
Clears interrupt service routine to call when GDO0 activates.
Definition: CC1101.cpp:250
+
CC1101::fixedPacketLengthMode
int16_t fixedPacketLengthMode(uint8_t len=RADIOLIB_CC1101_MAX_PACKET_LENGTH)
Set modem in fixed packet length mode.
Definition: CC1101.cpp:843
+
CC1101::setGdo2Action
void setGdo2Action(void(*func)(void), uint32_t dir)
Sets interrupt service routine to call when GDO2 activates.
Definition: CC1101.cpp:242
CC1101::begin
int16_t begin(float freq=RADIOLIB_CC1101_DEFAULT_FREQ, float br=RADIOLIB_CC1101_DEFAULT_BR, float freqDev=RADIOLIB_CC1101_DEFAULT_FREQDEV, float rxBw=RADIOLIB_CC1101_DEFAULT_RXBW, int8_t pwr=RADIOLIB_CC1101_DEFAULT_POWER, uint8_t preambleLength=RADIOLIB_CC1101_DEFAULT_PREAMBLELEN)
Initialization method.
Definition: CC1101.cpp:13
-
CC1101::setDataShaping
int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Allowed value is RADI...
Definition: CC1101.cpp:930
-
CC1101::setPreambleLength
int16_t setPreambleLength(uint8_t preambleLength, uint8_t qualityThreshold)
Sets preamble length.
Definition: CC1101.cpp:705
-
CC1101::getPromiscuousMode
bool getPromiscuousMode()
Get whether the modem is in promiscuous mode: no packet filtering (e.g., no preamble,...
Definition: CC1101.cpp:926
-
CC1101::transmitDirectAsync
int16_t transmitDirectAsync(uint32_t frf=0)
Starts asynchronous direct mode transmission.
Definition: CC1101.cpp:182
-
CC1101::finishTransmit
int16_t finishTransmit() override
Clean up after transmission is done.
Definition: CC1101.cpp:350
-
CC1101::startReceive
int16_t startReceive()
Interrupt-driven receive method. GDO0 will be activated when full packet is received.
Definition: CC1101.cpp:361
-
CC1101::setOOK
int16_t setOOK(bool enableOOK)
Enables/disables OOK modulation instead of FSK.
Definition: CC1101.cpp:768
+
CC1101::setDataShaping
int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Allowed value is RADI...
Definition: CC1101.cpp:927
+
CC1101::setPreambleLength
int16_t setPreambleLength(uint8_t preambleLength, uint8_t qualityThreshold)
Sets preamble length.
Definition: CC1101.cpp:702
+
CC1101::getPromiscuousMode
bool getPromiscuousMode()
Get whether the modem is in promiscuous mode: no packet filtering (e.g., no preamble,...
Definition: CC1101.cpp:923
+
CC1101::transmitDirectAsync
int16_t transmitDirectAsync(uint32_t frf=0)
Starts asynchronous direct mode transmission.
Definition: CC1101.cpp:180
+
CC1101::finishTransmit
int16_t finishTransmit() override
Clean up after transmission is done.
Definition: CC1101.cpp:348
+
CC1101::startReceive
int16_t startReceive()
Interrupt-driven receive method. GDO0 will be activated when full packet is received.
Definition: CC1101.cpp:359
+
CC1101::setOOK
int16_t setOOK(bool enableOOK)
Enables/disables OOK modulation instead of FSK.
Definition: CC1101.cpp:765
Module
Implements all common low-level methods to control the wireless module. Every module class contains o...
Definition: Module.h:31
Module::RFSWITCH_MAX_PINS
static const size_t RFSWITCH_MAX_PINS
The maximum number of pins supported by the RF switch code.
Definition: Module.h:42
PhysicalLayer
Provides common interface for protocols that run on LoRa/FSK modules, such as RTTY or LoRaWAN....
Definition: PhysicalLayer.h:15