[FSK4] Added AFSK example

examples/FSK4/FSK4_Transmit_AFSK/FSK4_Transmit_AFSK.ino

@@ -0,0 +1,118 @@
+/*
+   RadioLib FSK4 Transmit AFSK Example
+
+   This example sends an example FSK-4 'Horus Binary' message 
+   using SX1278's FSK modem. The data is modulated as AFSK.
+
+   This signal can be demodulated using an FM demodulator (SDR or otherwise),
+   and horusdemodlib: https://github.com/projecthorus/horusdemodlib/wiki
+
+   Other modules that can be used for FSK4:
+    - SX127x/RFM9x
+    - RF69
+    - SX1231
+    - CC1101
+    - Si443x/RFM2x
+
+   For default module settings, see the wiki page
+   https://github.com/jgromes/RadioLib/wiki/Default-configuration
+
+   For full API reference, see the GitHub Pages
+   https://jgromes.github.io/RadioLib/
+*/
+
+// include the library
+#include <RadioLib.h>
+
+// SX1278 has the following connections:
+// NSS pin:   10
+// DIO0 pin:  2
+// RESET pin: 9
+// DIO1 pin:  3
+SX1278 radio = new Module(10, 2, 9, 3);
+
+// or using RadioShield
+// https://github.com/jgromes/RadioShield
+//SX1278 radio = RadioShield.ModuleA;
+
+// create AFSK client instance using the FSK module
+// pin 5 is connected to SX1278 DIO2
+AFSKClient audio(&radio, 5);
+
+// create FSK4 client instance using the AFSK instance
+FSK4Client fsk4(&audio);
+
+// An encoded Horus Binary telemetry packet.
+// Refer here for packet format information:
+// https://github.com/projecthorus/horusdemodlib/wiki/2---Modem-Details#horus-binary-v1-mode-4-fsk
+// After demodulation, deinterleaving, and descrambling, this results in a packet:
+// 00000001172D0000000000000000D20463010AFF2780
+// This decodes to the Habitat-compatible telemetry string:
+// $$4FSKTEST,0,01:23:45,0.00000,0.00000,1234,99,1,10,5.00*ABCD
+int horusPacketLen = 45;
+byte horusPacket[] = {
+  0x45, 0x24, 0x24, 0x48, 0x2F, 0x12, 0x16, 0x08, 0x15, 0xC1,
+  0x49, 0xB2, 0x06, 0xFC, 0x92, 0xEB, 0x93, 0xD7, 0xEE, 0x5D,
+  0x35, 0xA0, 0x91, 0xDA, 0x8D, 0x5F, 0x85, 0x6B, 0x63, 0x03,
+  0x6B, 0x60, 0xEA, 0xFE, 0x55, 0x9D, 0xF1, 0xAB, 0xE5, 0x5E,
+  0xDB, 0x7C, 0xDB, 0x21, 0x5A, 0x19
+};
+
+void setup() {
+  Serial.begin(9600);
+
+  // initialize SX1278 with default settings
+  Serial.print(F("[SX1278] Initializing ... "));
+  int state = radio.beginFSK();
+
+  // when using one of the non-LoRa modules for RTTY
+  // (RF69, CC1101, Si4432 etc.), use the basic begin() method
+  // int state = radio.begin();
+
+  if(state == ERR_NONE) {
+    Serial.println(F("success!"));
+  } else {
+    Serial.print(F("failed, code "));
+    Serial.println(state);
+    while(true);
+  }
+
+  // initialize FSK4 client
+  // NOTE: Unlike FSK FSK4, AFSK requires no rounding of
+  //       the frequency shift.
+  Serial.print(F("[FSK4] Initializing ... "));
+  // low ("space") frequency:     434.0 MHz
+  // frequency shift:             270 Hz
+  // baud rate:                   100 baud
+  state = fsk4.begin(400, 270, 100);
+  if(state == ERR_NONE) {
+    Serial.println(F("success!"));
+  } else {
+    Serial.print(F("failed, code "));
+    Serial.println(state);
+    while(true);
+  }
+}
+
+void loop() {
+  Serial.print(F("[FSK4] Sending FSK4 data packet ... "));
+
+  // send out idle condition for 500 ms
+  fsk4.idle();
+  delay(1000);
+
+  // FSK4Client supports binary write methods
+
+  // send some bytes as a preamble
+  for(int i = 0; i < 8; i++) {
+    fsk4.write(0x1B);
+  }
+
+  // now send the encoded packet
+  fsk4.write(horusPacket, horusPacketLen);
+
+  Serial.println(F("done!"));
+
+  // wait for a second before transmitting again
+  delay(1000);
+}