From ccb056a6ebab81a45fddd766dd4f559bfbb786f3 Mon Sep 17 00:00:00 2001 From: jgromes Date: Sun, 14 Mar 2021 20:51:37 +0000 Subject: [PATCH] =?UTF-8?q?Deploying=20to=20gh-pages=20from=20=20@=20be147?= =?UTF-8?q?1c32a7c0eb370a3bfb38e779368959f597c=20=F0=9F=9A=80?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- _s_x1272_8h_source.html | 30 +++++++++++++++--------------- _s_x1278_8h_source.html | 30 +++++++++++++++--------------- 2 files changed, 30 insertions(+), 30 deletions(-) diff --git a/_s_x1272_8h_source.html b/_s_x1272_8h_source.html index 2ac0292c..ba0c7c3f 100644 --- a/_s_x1272_8h_source.html +++ b/_s_x1272_8h_source.html @@ -242,27 +242,27 @@ $(document).ready(function(){initNavTree('_s_x1272_8h_source.html',''); initResi
312 #endif
-
SX1272::setFrequency
int16_t setFrequency(float freq)
Sets carrier frequency. Allowed values range from 860.0 MHz to 1020.0 MHz.
Definition: SX1272.cpp:70
+
SX1272::setFrequency
int16_t setFrequency(float freq)
Sets carrier frequency. Allowed values range from 860.0 MHz to 1020.0 MHz.
Definition: SX1272.cpp:75
SX1272::begin
int16_t begin(float freq=915.0, float bw=125.0, uint8_t sf=9, uint8_t cr=7, uint8_t syncWord=SX127X_SYNC_WORD, int8_t power=10, uint16_t preambleLength=8, uint8_t gain=0)
LoRa modem initialization method. Must be called at least once from Arduino sketch to initialize the ...
Definition: SX1272.cpp:8
-
SX1272::setGain
int16_t setGain(uint8_t gain)
Sets gain of receiver LNA (low-noise amplifier). Can be set to any integer in range 1 to 6 where 1 is...
Definition: SX1272.cpp:240
-
SX1272::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf)
Sets LoRa link spreading factor. Allowed values range from 6 to 12. Only available in LoRa mode.
Definition: SX1272.cpp:121
-
SX1272::forceLDRO
int16_t forceLDRO(bool enable)
Forces LoRa low data rate optimization. Only available in LoRa mode. After calling this method,...
Definition: SX1272.cpp:385
+
SX1272::setGain
int16_t setGain(uint8_t gain)
Sets gain of receiver LNA (low-noise amplifier). Can be set to any integer in range 1 to 6 where 1 is...
Definition: SX1272.cpp:245
+
SX1272::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf)
Sets LoRa link spreading factor. Allowed values range from 6 to 12. Only available in LoRa mode.
Definition: SX1272.cpp:126
+
SX1272::forceLDRO
int16_t forceLDRO(bool enable)
Forces LoRa low data rate optimization. Only available in LoRa mode. After calling this method,...
Definition: SX1272.cpp:390
SX1272
Derived class for SX1272 modules. Also used as base class for SX1273. Both modules use the same basic...
Definition: SX1272.h:95
-
SX1272::setDataShapingOOK
int16_t setDataShapingOOK(uint8_t sh)
Sets filter cutoff frequency that will be used for data shaping. Allowed values are 1 for frequency e...
Definition: SX1272.cpp:295
-
SX1272::setCodingRate
int16_t setCodingRate(uint8_t cr)
Sets LoRa link coding rate denominator. Allowed values range from 5 to 8. Only available in LoRa mode...
Definition: SX1272.cpp:177
+
SX1272::setDataShapingOOK
int16_t setDataShapingOOK(uint8_t sh)
Sets filter cutoff frequency that will be used for data shaping. Allowed values are 1 for frequency e...
Definition: SX1272.cpp:300
+
SX1272::setCodingRate
int16_t setCodingRate(uint8_t cr)
Sets LoRa link coding rate denominator. Allowed values range from 5 to 8. Only available in LoRa mode...
Definition: SX1272.cpp:182
SX127x
Base class for SX127x series. All derived classes for SX127x (e.g. SX1278 or SX1272) inherit from thi...
Definition: SX127x.h:547
-
SX1272::setBandwidth
int16_t setBandwidth(float bw)
Sets LoRa link bandwidth. Allowed values are 125, 250 and 500 kHz. Only available in LoRa mode.
Definition: SX1272.cpp:81
-
SX1272::autoLDRO
int16_t autoLDRO()
Re-enables automatic LDRO configuration. Only available in LoRa mode. After calling this method,...
Definition: SX1272.cpp:398
-
SX1272::setDataShaping
int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Only available in FSK...
Definition: SX1272.cpp:265
+
SX1272::setBandwidth
int16_t setBandwidth(float bw)
Sets LoRa link bandwidth. Allowed values are 125, 250 and 500 kHz. Only available in LoRa mode.
Definition: SX1272.cpp:86
+
SX1272::autoLDRO
int16_t autoLDRO()
Re-enables automatic LDRO configuration. Only available in LoRa mode. After calling this method,...
Definition: SX1272.cpp:403
+
SX1272::setDataShaping
int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Only available in FSK...
Definition: SX1272.cpp:270
SX1272::beginFSK
int16_t beginFSK(float freq=915.0, float br=48.0, float rxBw=125.0, float freqDev=50.0, int8_t power=10, uint16_t preambleLength=16, bool enableOOK=false)
FSK modem initialization method. Must be called at least once from Arduino sketch to initialize the m...
Definition: SX1272.cpp:40
Module
Implements all common low-level SPI/UART/I2C methods to control the wireless module....
Definition: Module.h:17
-
SX1272::getRSSI
float getRSSI()
Gets recorded signal strength indicator of the latest received packet for LoRa modem,...
Definition: SX1272.cpp:328
-
SX1272::reset
void reset() override
Reset method. Will reset the chip to the default state using RST pin.
Definition: SX1272.cpp:62
-
SX1272::setCRC
int16_t setCRC(bool enable, bool mode=false)
Enables/disables CRC check of received packets.
Definition: SX1272.cpp:357
+
SX1272::getRSSI
float getRSSI()
Gets recorded signal strength indicator of the latest received packet for LoRa modem,...
Definition: SX1272.cpp:333
+
SX1272::reset
void reset() override
Reset method. Will reset the chip to the default state using RST pin.
Definition: SX1272.cpp:67
+
SX1272::setCRC
int16_t setCRC(bool enable, bool mode=false)
Enables/disables CRC check of received packets.
Definition: SX1272.cpp:362
SX1272::SX1272
SX1272(Module *mod)
Default constructor. Called from Arduino sketch when creating new LoRa instance.
Definition: SX1272.cpp:4
-
SX1272::implicitHeader
int16_t implicitHeader(size_t len)
Set implicit header mode for future reception/transmission.
Definition: SX1272.cpp:407
-
SX1272::explicitHeader
int16_t explicitHeader()
Set explicit header mode for future reception/transmission.
Definition: SX1272.cpp:411
-
SX1272::setOutputPower
int16_t setOutputPower(int8_t power)
Sets transmission output power. Allowed values range from 2 to 17 dBm.
Definition: SX1272.cpp:211
+
SX1272::implicitHeader
int16_t implicitHeader(size_t len)
Set implicit header mode for future reception/transmission.
Definition: SX1272.cpp:412
+
SX1272::explicitHeader
int16_t explicitHeader()
Set explicit header mode for future reception/transmission.
Definition: SX1272.cpp:416
+
SX1272::setOutputPower
int16_t setOutputPower(int8_t power)
Sets transmission output power. Allowed values range from 2 to 17 dBm.
Definition: SX1272.cpp:216
-
SX1278::reset
void reset() override
Reset method. Will reset the chip to the default state using RST pin.
Definition: SX1278.cpp:57
-
SX1278::getRSSI
float getRSSI()
Gets recorded signal strength indicator of the latest received packet for LoRa modem,...
Definition: SX1278.cpp:399
-
SX1278::implicitHeader
int16_t implicitHeader(size_t len)
Set implicit header mode for future reception/transmission.
Definition: SX1278.cpp:485
+
SX1278::reset
void reset() override
Reset method. Will reset the chip to the default state using RST pin.
Definition: SX1278.cpp:62
+
SX1278::getRSSI
float getRSSI()
Gets recorded signal strength indicator of the latest received packet for LoRa modem,...
Definition: SX1278.cpp:404
+
SX1278::implicitHeader
int16_t implicitHeader(size_t len)
Set implicit header mode for future reception/transmission.
Definition: SX1278.cpp:490
SX1278::begin
int16_t begin(float freq=434.0, float bw=125.0, uint8_t sf=9, uint8_t cr=7, uint8_t syncWord=SX127X_SYNC_WORD, int8_t power=10, uint16_t preambleLength=8, uint8_t gain=0)
LoRa modem initialization method. Must be called at least once from Arduino sketch to initialize the ...
Definition: SX1278.cpp:8
SX1278::SX1278
SX1278(Module *mod)
Default constructor. Called from Arduino sketch when creating new LoRa instance.
Definition: SX1278.cpp:4
-
SX1278::explicitHeader
int16_t explicitHeader()
Set explicit header mode for future reception/transmission.
Definition: SX1278.cpp:489
-
SX1278::setCodingRate
int16_t setCodingRate(uint8_t cr)
Sets LoRa link coding rate denominator. Allowed values range from 5 to 8. Only available in LoRa mode...
Definition: SX1278.cpp:249
-
SX1278::setCRC
int16_t setCRC(bool enable, bool mode=false)
Enables/disables CRC check of received packets.
Definition: SX1278.cpp:435
-
SX1278::setBandwidth
int16_t setBandwidth(float bw)
Sets LoRa link bandwidth. Allowed values are 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125,...
Definition: SX1278.cpp:139
+
SX1278::explicitHeader
int16_t explicitHeader()
Set explicit header mode for future reception/transmission.
Definition: SX1278.cpp:494
+
SX1278::setCodingRate
int16_t setCodingRate(uint8_t cr)
Sets LoRa link coding rate denominator. Allowed values range from 5 to 8. Only available in LoRa mode...
Definition: SX1278.cpp:254
+
SX1278::setCRC
int16_t setCRC(bool enable, bool mode=false)
Enables/disables CRC check of received packets.
Definition: SX1278.cpp:440
+
SX1278::setBandwidth
int16_t setBandwidth(float bw)
Sets LoRa link bandwidth. Allowed values are 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125,...
Definition: SX1278.cpp:144
SX1278
Derived class for SX1278 modules. Also used as base class for SX1276, SX1277, SX1279,...
Definition: SX1278.h:104
SX127x
Base class for SX127x series. All derived classes for SX127x (e.g. SX1278 or SX1272) inherit from thi...
Definition: SX127x.h:547
-
SX1278::setFrequency
int16_t setFrequency(float freq)
Sets carrier frequency. Allowed values range from 137.0 MHz to 525.0 MHz.
Definition: SX1278.cpp:65
+
SX1278::setFrequency
int16_t setFrequency(float freq)
Sets carrier frequency. Allowed values range from 137.0 MHz to 525.0 MHz.
Definition: SX1278.cpp:70
Module
Implements all common low-level SPI/UART/I2C methods to control the wireless module....
Definition: Module.h:17
-
SX1278::forceLDRO
int16_t forceLDRO(bool enable)
Forces LoRa low data rate optimization. Only available in LoRa mode. After calling this method,...
Definition: SX1278.cpp:463
-
SX1278::autoLDRO
int16_t autoLDRO()
Re-enables automatic LDRO configuration. Only available in LoRa mode. After calling this method,...
Definition: SX1278.cpp:476
-
SX1278::setDataShapingOOK
int16_t setDataShapingOOK(uint8_t sh)
Sets filter cutoff frequency that will be used for data shaping. Allowed values are 1 for frequency e...
Definition: SX1278.cpp:367
-
SX1278::setGain
int16_t setGain(uint8_t gain)
Sets gain of receiver LNA (low-noise amplifier). Can be set to any integer in range 1 to 6 where 1 is...
Definition: SX1278.cpp:312
-
SX1278::setDataShaping
int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Only available in FSK...
Definition: SX1278.cpp:337
-
SX1278::setOutputPower
int16_t setOutputPower(int8_t power)
Sets transmission output power. Allowed values range from 2 to 17 dBm.
Definition: SX1278.cpp:283
-
SX1278::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf)
Sets LoRa link spreading factor. Allowed values range from 6 to 12. Only available in LoRa mode.
Definition: SX1278.cpp:193
+
SX1278::forceLDRO
int16_t forceLDRO(bool enable)
Forces LoRa low data rate optimization. Only available in LoRa mode. After calling this method,...
Definition: SX1278.cpp:468
+
SX1278::autoLDRO
int16_t autoLDRO()
Re-enables automatic LDRO configuration. Only available in LoRa mode. After calling this method,...
Definition: SX1278.cpp:481
+
SX1278::setDataShapingOOK
int16_t setDataShapingOOK(uint8_t sh)
Sets filter cutoff frequency that will be used for data shaping. Allowed values are 1 for frequency e...
Definition: SX1278.cpp:372
+
SX1278::setGain
int16_t setGain(uint8_t gain)
Sets gain of receiver LNA (low-noise amplifier). Can be set to any integer in range 1 to 6 where 1 is...
Definition: SX1278.cpp:317
+
SX1278::setDataShaping
int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Only available in FSK...
Definition: SX1278.cpp:342
+
SX1278::setOutputPower
int16_t setOutputPower(int8_t power)
Sets transmission output power. Allowed values range from 2 to 17 dBm.
Definition: SX1278.cpp:288
+
SX1278::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf)
Sets LoRa link spreading factor. Allowed values range from 6 to 12. Only available in LoRa mode.
Definition: SX1278.cpp:198
SX1278::beginFSK
int16_t beginFSK(float freq=434.0, float br=48.0, float freqDev=50.0, float rxBw=125.0, int8_t power=10, uint16_t preambleLength=16, bool enableOOK=false)
FSK modem initialization method. Must be called at least once from Arduino sketch to initialize the m...
Definition: SX1278.cpp:35