diff --git a/_r_f69_8h_source.html b/_r_f69_8h_source.html index 463be681..4875b920 100644 --- a/_r_f69_8h_source.html +++ b/_r_f69_8h_source.html @@ -674,59 +674,59 @@ $(document).ready(function(){initNavTree('_r_f69_8h_source.html',''); initResiza
909 #endif
-
RF69::setCrcFiltering
int16_t setCrcFiltering(bool crcOn=true)
Enable CRC filtering and generation.
Definition: RF69.cpp:718
+
RF69::setCrcFiltering
int16_t setCrcFiltering(bool crcOn=true)
Enable CRC filtering and generation.
Definition: RF69.cpp:715
RF69::setDio0Action
void setDio0Action(void(*func)(void))
Sets interrupt service routine to call when DIO0 activates.
Definition: RF69.cpp:269
RF69::clearDio1Action
void clearDio1Action()
Clears interrupt service routine to call when DIO1 activates.
Definition: RF69.cpp:285
PhysicalLayer::transmit
int16_t transmit(__FlashStringHelper *fstr, uint8_t addr=0)
Arduino Flash String transmit method.
Definition: PhysicalLayer.cpp:8
-
RF69::setBroadcastAddress
int16_t setBroadcastAddress(uint8_t broadAddr)
Sets broadcast address. Calling this method will also enable address filtering for node and broadcast...
Definition: RF69.cpp:637
+
RF69::setBroadcastAddress
int16_t setBroadcastAddress(uint8_t broadAddr)
Sets broadcast address. Calling this method will also enable address filtering for node and broadcast...
Definition: RF69.cpp:634
RF69::receiveDirect
int16_t receiveDirect() override
Starts direct mode reception.
Definition: RF69.cpp:200
-
RF69::setRfSwitchPins
void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn)
Some modules contain external RF switch controlled by two pins. This function gives RadioLib control ...
Definition: RF69.cpp:802
-
RF69::readData
int16_t readData(uint8_t *data, size_t len) override
Reads data received after calling startReceive method.
Definition: RF69.cpp:343
-
RF69::setPromiscuousMode
int16_t setPromiscuousMode(bool promiscuous=true)
Set modem in "sniff" mode: no packet filtering (e.g., no preamble, sync word, address,...
Definition: RF69.cpp:726
+
RF69::setRfSwitchPins
void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn)
Some modules contain external RF switch controlled by two pins. This function gives RadioLib control ...
Definition: RF69.cpp:799
+
RF69::readData
int16_t readData(uint8_t *data, size_t len) override
Reads data received after calling startReceive method.
Definition: RF69.cpp:340
+
RF69::setPromiscuousMode
int16_t setPromiscuousMode(bool promiscuous=true)
Set modem in "sniff" mode: no packet filtering (e.g., no preamble, sync word, address,...
Definition: RF69.cpp:723
RF69::receive
int16_t receive(uint8_t *data, size_t len) override
Blocking binary receive method. Overloads for string-based transmissions are implemented in PhysicalL...
Definition: RF69.cpp:139
RF69::clearDio0Action
void clearDio0Action()
Clears interrupt service routine to call when DIO0 activates.
Definition: RF69.cpp:273
-
RF69::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: RF69.cpp:680
+
RF69::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: RF69.cpp:677
RF69
Control class for RF69 module. Also serves as base class for SX1231.
Definition: RF69.h:440
RF69::setDio1Action
void setDio1Action(void(*func)(void))
Sets interrupt service routine to call when DIO1 activates.
Definition: RF69.cpp:277
RF69::startReceive
int16_t startReceive()
Interrupt-driven receive method. GDO0 will be activated when full packet is received.
Definition: RF69.cpp:241
-
RF69::setFrequency
int16_t setFrequency(float freq)
Sets carrier frequency. Allowed values are in bands 290.0 to 340.0 MHz, 431.0 to 510....
Definition: RF69.cpp:394
-
RF69::fixedPacketLengthMode
int16_t fixedPacketLengthMode(uint8_t len=RF69_MAX_PACKET_LENGTH)
Set modem in fixed packet length mode.
Definition: RF69.cpp:693
-
RF69::setNodeAddress
int16_t setNodeAddress(uint8_t nodeAddr)
Sets node address. Calling this method will also enable address filtering for node address only.
Definition: RF69.cpp:628
+
RF69::setFrequency
int16_t setFrequency(float freq)
Sets carrier frequency. Allowed values are in bands 290.0 to 340.0 MHz, 431.0 to 510....
Definition: RF69.cpp:391
+
RF69::fixedPacketLengthMode
int16_t fixedPacketLengthMode(uint8_t len=RF69_MAX_PACKET_LENGTH)
Set modem in fixed packet length mode.
Definition: RF69.cpp:690
+
RF69::setNodeAddress
int16_t setNodeAddress(uint8_t nodeAddr)
Sets node address. Calling this method will also enable address filtering for node address only.
Definition: RF69.cpp:625
RF69::enableAES
int16_t enableAES()
Enables AES encryption.
Definition: RF69.cpp:233
-
RF69::setPreambleLength
int16_t setPreambleLength(uint8_t preambleLen)
Sets preamble length.
Definition: RF69.cpp:617
+
RF69::setPreambleLength
int16_t setPreambleLength(uint8_t preambleLen)
Sets preamble length.
Definition: RF69.cpp:614
RF69::reset
void reset()
Reset method. Will reset the chip to the default state using RST pin.
Definition: RF69.cpp:102
RF69::transmit
int16_t transmit(uint8_t *data, size_t len, uint8_t addr=0) override
Blocking binary transmit method. Overloads for string-based transmissions are implemented in Physical...
Definition: RF69.cpp:110
-
RF69::setRxBandwidth
int16_t setRxBandwidth(float rxBw)
Sets receiver bandwidth. Allowed values are 2.6, 3.1, 3.9, 5.2, 6.3, 7.8, 10.4, 12....
Definition: RF69.cpp:437
+
RF69::setRxBandwidth
int16_t setRxBandwidth(float rxBw)
Sets receiver bandwidth. Allowed values are 2.6, 3.1, 3.9, 5.2, 6.3, 7.8, 10.4, 12....
Definition: RF69.cpp:434
PhysicalLayer::readData
int16_t readData(String &str, size_t len=0)
Reads data that was received after calling startReceive method.
Definition: PhysicalLayer.cpp:57
-
RF69::setBitRate
int16_t setBitRate(float br)
Sets bit rate. Allowed values range from 1.2 to 300.0 kbps.
Definition: RF69.cpp:416
+
RF69::setBitRate
int16_t setBitRate(float br)
Sets bit rate. Allowed values range from 1.2 to 300.0 kbps.
Definition: RF69.cpp:413
RF69::disableAES
int16_t disableAES()
Disables AES encryption.
Definition: RF69.cpp:237
RF69::RF69
RF69(Module *module)
Default constructor.
Definition: RF69.cpp:4
-
RF69::setDataShaping
int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Allowed values are RA...
Definition: RF69.cpp:752
-
RF69::setOOK
int16_t setOOK(bool enableOOK)
Enables/disables OOK modulation instead of FSK.
Definition: RF69.cpp:372
+
RF69::setDataShaping
int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Allowed values are RA...
Definition: RF69.cpp:749
+
RF69::setOOK
int16_t setOOK(bool enableOOK)
Enables/disables OOK modulation instead of FSK.
Definition: RF69.cpp:369
RF69::standby
int16_t standby() override
Sets the module to standby mode.
Definition: RF69.cpp:171
-
RF69::setLnaTestBoost
int16_t setLnaTestBoost(bool value)
Enable/disable LNA Boost mode (disabled by default).
Definition: RF69.cpp:790
-
RF69::getTemperature
int16_t getTemperature()
Measures temperature.
Definition: RF69.cpp:663
-
RF69::setFrequencyDeviation
int16_t setFrequencyDeviation(float freqDev) override
Sets frequency deviation.
Definition: RF69.cpp:532
-
RF69::disableAddressFiltering
int16_t disableAddressFiltering()
Disables address filtering. Calling this method will also erase previously set addresses.
Definition: RF69.cpp:646
-
RF69::setSyncWord
int16_t setSyncWord(uint8_t *syncWord, size_t len, uint8_t maxErrBits=0)
Sets sync word. Up to 8 bytes can be set as sync word.
Definition: RF69.cpp:594
-
RF69::disableSyncWordFiltering
int16_t disableSyncWordFiltering()
Disable preamble and sync word filtering and generation.
Definition: RF69.cpp:706
-
RF69::getRSSI
float getRSSI()
Gets RSSI (Recorded Signal Strength Indicator) of the last received packet.
Definition: RF69.cpp:798
+
RF69::setLnaTestBoost
int16_t setLnaTestBoost(bool value)
Enable/disable LNA Boost mode (disabled by default).
Definition: RF69.cpp:787
+
RF69::getTemperature
int16_t getTemperature()
Measures temperature.
Definition: RF69.cpp:660
+
RF69::setFrequencyDeviation
int16_t setFrequencyDeviation(float freqDev) override
Sets frequency deviation.
Definition: RF69.cpp:529
+
RF69::disableAddressFiltering
int16_t disableAddressFiltering()
Disables address filtering. Calling this method will also erase previously set addresses.
Definition: RF69.cpp:643
+
RF69::setSyncWord
int16_t setSyncWord(uint8_t *syncWord, size_t len, uint8_t maxErrBits=0)
Sets sync word. Up to 8 bytes can be set as sync word.
Definition: RF69.cpp:591
+
RF69::disableSyncWordFiltering
int16_t disableSyncWordFiltering()
Disable preamble and sync word filtering and generation.
Definition: RF69.cpp:703
+
RF69::getRSSI
float getRSSI()
Gets RSSI (Recorded Signal Strength Indicator) of the last received packet.
Definition: RF69.cpp:795
PhysicalLayer
Provides common interface for protocols that run on LoRa/FSK modules, such as RTTY or LoRaWAN....
Definition: PhysicalLayer.h:13
PhysicalLayer::receive
int16_t receive(String &str, size_t len=0)
Arduino String receive method.
Definition: PhysicalLayer.cpp:98
-
RF69::setEncoding
int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Allowed values are RADIOLIB_ENCODING_NRZ, RADIOLIB_ENCODING_MANCHESTER an...
Definition: RF69.cpp:772
+
RF69::setEncoding
int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Allowed values are RADIOLIB_ENCODING_NRZ, RADIOLIB_ENCODING_MANCHESTER an...
Definition: RF69.cpp:769
RF69::setAESKey
void setAESKey(uint8_t *key)
Sets AES key.
Definition: RF69.cpp:229
Module
Implements all common low-level SPI/UART/I2C methods to control the wireless module....
Definition: Module.h:17
RF69::transmitDirect
int16_t transmitDirect(uint32_t frf=0) override
Starts direct mode transmission.
Definition: RF69.cpp:179
-
RF69::setOutputPower
int16_t setOutputPower(int8_t power, bool highPower=false)
Sets output power. Allowed values range from -18 to 13 dBm for low power modules (RF69C/CW) or -2 to ...
Definition: RF69.cpp:556
+
RF69::setOutputPower
int16_t setOutputPower(int8_t power, bool highPower=false)
Sets output power. Allowed values range from -18 to 13 dBm for low power modules (RF69C/CW) or -2 to ...
Definition: RF69.cpp:553
RF69::packetMode
int16_t packetMode()
Stops direct mode. It is required to call this method to switch from direct transmissions to packet-b...
Definition: RF69.cpp:225
-
RF69::setAmbientTemperature
void setAmbientTemperature(int16_t tempAmbient)
Sets ambient temperature. Required to correct values from on-board temperature sensor.
Definition: RF69.cpp:659
-
RF69::setOokThresholdType
int16_t setOokThresholdType(uint8_t type)
Selects the type of threshold in the OOK data slicer.
Definition: RF69.cpp:387
+
RF69::setAmbientTemperature
void setAmbientTemperature(int16_t tempAmbient)
Sets ambient temperature. Required to correct values from on-board temperature sensor.
Definition: RF69.cpp:656
+
RF69::setOokThresholdType
int16_t setOokThresholdType(uint8_t type)
Selects the type of threshold in the OOK data slicer.
Definition: RF69.cpp:384
RF69::sleep
int16_t sleep()
Sets the module to sleep mode.
Definition: RF69.cpp:163
-
RF69::getChipVersion
int16_t getChipVersion()
Read version SPI register. Should return RF69_CHIP_VERSION (0x24) if SX127x is connected and working.
Definition: RF69.cpp:825
-
RF69::enableSyncWordFiltering
int16_t enableSyncWordFiltering(uint8_t maxErrBits=0)
Enable sync word filtering and generation.
Definition: RF69.cpp:701
-
RF69::variablePacketLengthMode
int16_t variablePacketLengthMode(uint8_t maxLen=RF69_MAX_PACKET_LENGTH)
Set modem in variable packet length mode.
Definition: RF69.cpp:697
+
RF69::getChipVersion
int16_t getChipVersion()
Read version SPI register. Should return RF69_CHIP_VERSION (0x24) if SX127x is connected and working.
Definition: RF69.cpp:822
+
RF69::enableSyncWordFiltering
int16_t enableSyncWordFiltering(uint8_t maxErrBits=0)
Enable sync word filtering and generation.
Definition: RF69.cpp:698
+
RF69::variablePacketLengthMode
int16_t variablePacketLengthMode(uint8_t maxLen=RF69_MAX_PACKET_LENGTH)
Set modem in variable packet length mode.
Definition: RF69.cpp:694
RF69::startTransmit
int16_t startTransmit(uint8_t *data, size_t len, uint8_t addr=0) override
Interrupt-driven binary transmit method. Overloads for string-based transmissions are implemented in ...
Definition: RF69.cpp:292
-
RF69::random
uint8_t random()
Get one truly random byte from RSSI noise.
Definition: RF69.cpp:806
+
RF69::random
uint8_t random()
Get one truly random byte from RSSI noise.
Definition: RF69.cpp:803
RF69::begin
int16_t begin(float freq=434.0, float br=48.0, float freqDev=50.0, float rxBw=125.0, int8_t power=10, uint8_t preambleLen=16)
Initialization method.
Definition: RF69.cpp:8
PhysicalLayer::startTransmit
int16_t startTransmit(String &str, uint8_t addr=0)
Interrupt-driven Arduino String transmit method. Unlike the standard transmit method,...
Definition: PhysicalLayer.cpp:49