[LLCC68] Changed default crystal to XTAL (#784)
This commit is contained in:
parent
ac15b9ae7d
commit
bea5e70d0a
2 changed files with 5 additions and 2 deletions
|
@ -3,6 +3,7 @@
|
|||
|
||||
LLCC68::LLCC68(Module* mod) : SX1262(mod) {
|
||||
chipType = RADIOLIB_LLCC68_CHIP_TYPE;
|
||||
this->XTAL = true;
|
||||
}
|
||||
|
||||
int16_t LLCC68::begin(float freq, float bw, uint8_t sf, uint8_t cr, uint8_t syncWord, int8_t pwr, uint16_t preambleLength, float tcxoVoltage, bool useRegulatorLDO) {
|
||||
|
|
|
@ -32,11 +32,13 @@ class LLCC68: public SX1262 {
|
|||
\param syncWord 1-byte LoRa sync word. Defaults to RADIOLIB_SX126X_SYNC_WORD_PRIVATE (0x12).
|
||||
\param pwr Output power in dBm. Defaults to 10 dBm.
|
||||
\param preambleLength LoRa preamble length in symbols. Defaults to 8 symbols.
|
||||
\param tcxoVoltage TCXO reference voltage to be set on DIO3. Defaults to 1.6 V, set to 0 to skip.
|
||||
\param tcxoVoltage TCXO reference voltage to be set on DIO3. Defaults to 0 V (XTAL).
|
||||
If you are seeing -706/-707 error codes, it likely means you are using a module with TCXO.
|
||||
To use TCXO, either set this value to its reference voltage, or set SX126x::XTAL to false.
|
||||
\param useRegulatorLDO Whether to use only LDO regulator (true) or DC-DC regulator (false). Defaults to false.
|
||||
\returns \ref status_codes
|
||||
*/
|
||||
int16_t begin(float freq = 434.0, float bw = 125.0, uint8_t sf = 9, uint8_t cr = 7, uint8_t syncWord = RADIOLIB_SX126X_SYNC_WORD_PRIVATE, int8_t pwr = 10, uint16_t preambleLength = 8, float tcxoVoltage = 1.6, bool useRegulatorLDO = false);
|
||||
int16_t begin(float freq = 434.0, float bw = 125.0, uint8_t sf = 9, uint8_t cr = 7, uint8_t syncWord = RADIOLIB_SX126X_SYNC_WORD_PRIVATE, int8_t pwr = 10, uint16_t preambleLength = 8, float tcxoVoltage = 0, bool useRegulatorLDO = false);
|
||||
|
||||
// configuration methods
|
||||
|
||||
|
|
Loading…
Add table
Reference in a new issue