diff --git a/_lo_ra_w_a_n_8h_source.html b/_lo_ra_w_a_n_8h_source.html index b30c0a31..236d2d25 100644 --- a/_lo_ra_w_a_n_8h_source.html +++ b/_lo_ra_w_a_n_8h_source.html @@ -813,38 +813,38 @@ $(document).ready(function(){initNavTree('_lo_ra_w_a_n_8h_source.html',''); init
LoRaWANNode
LoRaWAN-compatible node (class A device).
Definition: LoRaWAN.h:514
LoRaWANNode::clearSession
void clearSession()
Clear an active session, so that the device will have to rejoin the network.
Definition: LoRaWAN.cpp:56
LoRaWANNode::setBufferNonces
int16_t setBufferNonces(uint8_t *persistentBuffer)
Fill the internal buffer that holds the LW base parameters with a supplied buffer.
Definition: LoRaWAN.cpp:72
-
LoRaWANNode::setDatarate
int16_t setDatarate(uint8_t drUp)
Set uplink datarate. This should not be used when ADR is enabled.
Definition: LoRaWAN.cpp:1973
-
LoRaWANNode::uplink
int16_t uplink(const char *str, uint8_t fPort, bool isConfirmed=false, LoRaWANEvent_t *event=NULL)
Send a message to the server.
Definition: LoRaWAN.cpp:854
+
LoRaWANNode::setDatarate
int16_t setDatarate(uint8_t drUp)
Set uplink datarate. This should not be used when ADR is enabled.
Definition: LoRaWAN.cpp:1976
+
LoRaWANNode::uplink
int16_t uplink(const char *str, uint8_t fPort, bool isConfirmed=false, LoRaWANEvent_t *event=NULL)
Send a message to the server.
Definition: LoRaWAN.cpp:857
LoRaWANNode::beginOTAA
void beginOTAA(uint64_t joinEUI, uint64_t devEUI, uint8_t *nwkKey, uint8_t *appKey)
Set the device credentials and activation configuration.
Definition: LoRaWAN.cpp:444
-
LoRaWANNode::maxPayloadDwellTime
uint8_t maxPayloadDwellTime()
Returns the maximum payload given the currently present dwell time limits. WARNING: the addition of M...
Definition: LoRaWAN.cpp:2056
-
LoRaWANNode::setDutyCycle
void setDutyCycle(bool enable=true, RadioLibTime_t msPerHour=0)
Toggle adherence to dutyCycle limits to on or off.
Definition: LoRaWAN.cpp:2014
-
LoRaWANNode::timeUntilUplink
RadioLibTime_t timeUntilUplink()
Returns time in milliseconds until next uplink is available under dutyCycle limits.
Definition: LoRaWAN.cpp:2038
-
LoRaWANNode::setDeviceStatus
void setDeviceStatus(uint8_t battLevel)
Set device status.
Definition: LoRaWAN.cpp:1667
-
LoRaWANNode::dutyCycleInterval
RadioLibTime_t dutyCycleInterval(RadioLibTime_t msPerHour, RadioLibTime_t airtime)
Calculate the minimum interval to adhere to a certain dutyCycle. This interval is based on the ToA of...
Definition: LoRaWAN.cpp:2028
-
LoRaWANNode::setDwellTime
void setDwellTime(bool enable, RadioLibTime_t msPerUplink=0)
Toggle adherence to dwellTime limits to on or off.
Definition: LoRaWAN.cpp:2047
-
LoRaWANNode::getAFCntDown
uint32_t getAFCntDown()
Returns the last application downlink's frame counter; also 0 if no application downlink occured yet.
Definition: LoRaWAN.cpp:1683
-
LoRaWANNode::getLastToA
RadioLibTime_t getLastToA()
Get the Time-on-air of the last uplink message.
Definition: LoRaWAN.cpp:2891
-
LoRaWANNode::activateABP
int16_t activateABP(uint8_t initialDr=RADIOLIB_LORAWAN_DATA_RATE_UNUSED)
Join network by restoring ABP session or performing over-the-air activation. In this procedure,...
Definition: LoRaWAN.cpp:778
+
LoRaWANNode::maxPayloadDwellTime
uint8_t maxPayloadDwellTime()
Returns the maximum payload given the currently present dwell time limits. WARNING: the addition of M...
Definition: LoRaWAN.cpp:2059
+
LoRaWANNode::setDutyCycle
void setDutyCycle(bool enable=true, RadioLibTime_t msPerHour=0)
Toggle adherence to dutyCycle limits to on or off.
Definition: LoRaWAN.cpp:2017
+
LoRaWANNode::timeUntilUplink
RadioLibTime_t timeUntilUplink()
Returns time in milliseconds until next uplink is available under dutyCycle limits.
Definition: LoRaWAN.cpp:2041
+
LoRaWANNode::setDeviceStatus
void setDeviceStatus(uint8_t battLevel)
Set device status.
Definition: LoRaWAN.cpp:1670
+
LoRaWANNode::dutyCycleInterval
RadioLibTime_t dutyCycleInterval(RadioLibTime_t msPerHour, RadioLibTime_t airtime)
Calculate the minimum interval to adhere to a certain dutyCycle. This interval is based on the ToA of...
Definition: LoRaWAN.cpp:2031
+
LoRaWANNode::setDwellTime
void setDwellTime(bool enable, RadioLibTime_t msPerUplink=0)
Toggle adherence to dwellTime limits to on or off.
Definition: LoRaWAN.cpp:2050
+
LoRaWANNode::getAFCntDown
uint32_t getAFCntDown()
Returns the last application downlink's frame counter; also 0 if no application downlink occured yet.
Definition: LoRaWAN.cpp:1686
+
LoRaWANNode::getLastToA
RadioLibTime_t getLastToA()
Get the Time-on-air of the last uplink message.
Definition: LoRaWAN.cpp:2894
+
LoRaWANNode::activateABP
int16_t activateABP(uint8_t initialDr=RADIOLIB_LORAWAN_DATA_RATE_UNUSED)
Join network by restoring ABP session or performing over-the-air activation. In this procedure,...
Definition: LoRaWAN.cpp:781
LoRaWANNode::TS009
bool TS009
TS009 Protocol Specification Verification switch (allows FPort 224 and cuts off uplink payload instea...
Definition: LoRaWAN.h:862
LoRaWANNode::getBufferNonces
uint8_t * getBufferNonces()
Returns the pointer to the internal buffer that holds the LW base parameters.
Definition: LoRaWAN.cpp:64
-
LoRaWANNode::sendReceive
int16_t sendReceive(const char *strUp, uint8_t fPort, uint8_t *dataDown, size_t *lenDown, bool isConfirmed=false, LoRaWANEvent_t *eventUp=NULL, LoRaWANEvent_t *eventDown=NULL)
Send a message to the server and wait for a downlink during Rx1 and/or Rx2 window.
Definition: LoRaWAN.cpp:1647
+
LoRaWANNode::sendReceive
int16_t sendReceive(const char *strUp, uint8_t fPort, uint8_t *dataDown, size_t *lenDown, bool isConfirmed=false, LoRaWANEvent_t *eventUp=NULL, LoRaWANEvent_t *eventDown=NULL)
Send a message to the server and wait for a downlink during Rx1 and/or Rx2 window.
Definition: LoRaWAN.cpp:1650
LoRaWANNode::getBufferSession
uint8_t * getBufferSession()
Returns the pointer to the internal buffer that holds the LW session parameters.
Definition: LoRaWAN.cpp:108
-
LoRaWANNode::beginABP
void beginABP(uint32_t addr, uint8_t *fNwkSIntKey, uint8_t *sNwkSIntKey, uint8_t *nwkSEncKey, uint8_t *appSKey)
Set the device credentials and activation configuration.
Definition: LoRaWAN.cpp:751
-
LoRaWANNode::isActivated
bool isActivated()
Whether there is an ongoing session active.
Definition: LoRaWAN.cpp:844
-
LoRaWANNode::setTxPower
int16_t setTxPower(int8_t txPower)
Configure TX power of the radio module.
Definition: LoRaWAN.cpp:2077
-
LoRaWANNode::getMacDeviceTimeAns
int16_t getMacDeviceTimeAns(uint32_t *gpsEpoch, uint8_t *fraction, bool returnUnix=true)
Returns the network time after requesting a DeviceTime MAC command. Returns 'true' if a network respo...
Definition: LoRaWAN.cpp:2870
-
LoRaWANNode::getNFCntDown
uint32_t getNFCntDown()
Returns the last network downlink's frame counter; also 0 if no network downlink occured yet.
Definition: LoRaWAN.cpp:1679
-
LoRaWANNode::getDevAddr
uint64_t getDevAddr()
Returns the DevAddr of the device, regardless of OTAA or ABP mode.
Definition: LoRaWAN.cpp:2887
-
LoRaWANNode::downlink
int16_t downlink(uint8_t *data, size_t *len, LoRaWANEvent_t *event=NULL)
Wait for downlink from the server in either RX1 or RX2 window.
Definition: LoRaWAN.cpp:1298
+
LoRaWANNode::beginABP
void beginABP(uint32_t addr, uint8_t *fNwkSIntKey, uint8_t *sNwkSIntKey, uint8_t *nwkSEncKey, uint8_t *appSKey)
Set the device credentials and activation configuration.
Definition: LoRaWAN.cpp:754
+
LoRaWANNode::isActivated
bool isActivated()
Whether there is an ongoing session active.
Definition: LoRaWAN.cpp:847
+
LoRaWANNode::setTxPower
int16_t setTxPower(int8_t txPower)
Configure TX power of the radio module.
Definition: LoRaWAN.cpp:2080
+
LoRaWANNode::getMacDeviceTimeAns
int16_t getMacDeviceTimeAns(uint32_t *gpsEpoch, uint8_t *fraction, bool returnUnix=true)
Returns the network time after requesting a DeviceTime MAC command. Returns 'true' if a network respo...
Definition: LoRaWAN.cpp:2873
+
LoRaWANNode::getNFCntDown
uint32_t getNFCntDown()
Returns the last network downlink's frame counter; also 0 if no network downlink occured yet.
Definition: LoRaWAN.cpp:1682
+
LoRaWANNode::getDevAddr
uint64_t getDevAddr()
Returns the DevAddr of the device, regardless of OTAA or ABP mode.
Definition: LoRaWAN.cpp:2890
+
LoRaWANNode::downlink
int16_t downlink(uint8_t *data, size_t *len, LoRaWANEvent_t *event=NULL)
Wait for downlink from the server in either RX1 or RX2 window.
Definition: LoRaWAN.cpp:1301
LoRaWANNode::setBufferSession
int16_t setBufferSession(uint8_t *persistentBuffer)
Fill the internal buffer that holds the LW session parameters with a supplied buffer.
Definition: LoRaWAN.cpp:127
LoRaWANNode::LoRaWANNode
LoRaWANNode(PhysicalLayer *phy, const LoRaWANBand_t *band, uint8_t subBand=0)
Default constructor.
Definition: LoRaWAN.cpp:30
LoRaWANNode::activateOTAA
int16_t activateOTAA(uint8_t initialDr=RADIOLIB_LORAWAN_DATA_RATE_UNUSED, LoRaWANJoinEvent_t *joinEvent=NULL)
Join network by restoring OTAA session or performing over-the-air activation. By this procedure,...
Definition: LoRaWAN.cpp:461
-
LoRaWANNode::getFCntUp
uint32_t getFCntUp()
Returns the last uplink's frame counter; also 0 if no uplink occured yet.
Definition: LoRaWAN.cpp:1672
-
LoRaWANNode::setRx2Dr
int16_t setRx2Dr(uint8_t dr)
Configure the Rx2 datarate for ABP mode. This should not be needed for LoRaWAN 1.1 as it is configure...
Definition: LoRaWAN.cpp:2141
-
LoRaWANNode::sendMacCommandReq
int16_t sendMacCommandReq(uint8_t cid)
Add a MAC command to the uplink queue. Only LinkCheck and DeviceTime are available to the user....
Definition: LoRaWAN.cpp:2168
-
LoRaWANNode::getMacLinkCheckAns
int16_t getMacLinkCheckAns(uint8_t *margin, uint8_t *gwCnt)
Returns the quality of connectivity after requesting a LinkCheck MAC command. Returns 'true' if a net...
Definition: LoRaWAN.cpp:2859
-
LoRaWANNode::setADR
void setADR(bool enable=true)
Toggle ADR to on or off.
Definition: LoRaWAN.cpp:2010
-
LoRaWANNode::resetFCntDown
void resetFCntDown()
Reset the downlink frame counters (application and network) This is unsafe and can possibly allow rep...
Definition: LoRaWAN.cpp:1687
+
LoRaWANNode::getFCntUp
uint32_t getFCntUp()
Returns the last uplink's frame counter; also 0 if no uplink occured yet.
Definition: LoRaWAN.cpp:1675
+
LoRaWANNode::setRx2Dr
int16_t setRx2Dr(uint8_t dr)
Configure the Rx2 datarate for ABP mode. This should not be needed for LoRaWAN 1.1 as it is configure...
Definition: LoRaWAN.cpp:2144
+
LoRaWANNode::sendMacCommandReq
int16_t sendMacCommandReq(uint8_t cid)
Add a MAC command to the uplink queue. Only LinkCheck and DeviceTime are available to the user....
Definition: LoRaWAN.cpp:2171
+
LoRaWANNode::getMacLinkCheckAns
int16_t getMacLinkCheckAns(uint8_t *margin, uint8_t *gwCnt)
Returns the quality of connectivity after requesting a LinkCheck MAC command. Returns 'true' if a net...
Definition: LoRaWAN.cpp:2862
+
LoRaWANNode::setADR
void setADR(bool enable=true)
Toggle ADR to on or off.
Definition: LoRaWAN.cpp:2013
+
LoRaWANNode::resetFCntDown
void resetFCntDown()
Reset the downlink frame counters (application and network) This is unsafe and can possibly allow rep...
Definition: LoRaWAN.cpp:1690
PhysicalLayer
Provides common interface for protocols that run on LoRa/FSK modules, such as RTTY or LoRaWAN....
Definition: PhysicalLayer.h:54
RadioLibTime_t
unsigned long RadioLibTime_t
Type used for durations in RadioLib.
Definition: TypeDef.h:611
LoRaWANBand_t
Structure to save information about LoRaWAN band.
Definition: LoRaWAN.h:380