diff --git a/_lo_ra_w_a_n_8h_source.html b/_lo_ra_w_a_n_8h_source.html index d630a315..07e3676f 100644 --- a/_lo_ra_w_a_n_8h_source.html +++ b/_lo_ra_w_a_n_8h_source.html @@ -887,38 +887,38 @@ $(document).ready(function(){initNavTree('_lo_ra_w_a_n_8h_source.html',''); init
LoRaWANNode::clearSession
void clearSession()
Clear an active session, so that the device will have to rejoin the network.
Definition: LoRaWAN.cpp:279
LoRaWANNode::setBufferNonces
int16_t setBufferNonces(uint8_t *persistentBuffer)
Fill the internal buffer that holds the LW base parameters with a supplied buffer.
Definition: LoRaWAN.cpp:243
LoRaWANNode::sendReceive
virtual int16_t sendReceive(const char *strUp, uint8_t fPort, bool isConfirmed=false, LoRaWANEvent_t *eventUp=NULL, LoRaWANEvent_t *eventDown=NULL)
Send a message to the server and wait for a downlink during Rx1 and/or Rx2 window.
Definition: LoRaWAN.cpp:45
-
LoRaWANNode::setDatarate
int16_t setDatarate(uint8_t drUp)
Set uplink datarate. This should not be used when ADR is enabled.
Definition: LoRaWAN.cpp:2579
-
LoRaWANNode::scheduleTransmission
void scheduleTransmission(RadioLibTime_t tUplink)
Set the exact time a transmission should occur. Note: this is the internal clock time....
Definition: LoRaWAN.cpp:2710
+
LoRaWANNode::setDatarate
int16_t setDatarate(uint8_t drUp)
Set uplink datarate. This should not be used when ADR is enabled.
Definition: LoRaWAN.cpp:2578
+
LoRaWANNode::scheduleTransmission
void scheduleTransmission(RadioLibTime_t tUplink)
Set the exact time a transmission should occur. Note: this is the internal clock time....
Definition: LoRaWAN.cpp:2709
LoRaWANNode::scanGuard
RadioLibTime_t scanGuard
Rx window padding in milliseconds according to the spec, the Rx window must be at least enough time t...
Definition: LoRaWAN.h:859
-
LoRaWANNode::setCSMA
void setCSMA(bool csmaEnabled, uint8_t maxChanges=4, uint8_t backoffMax=0, uint8_t difsSlots=2)
Configures CSMA for LoRaWAN as per TR013, LoRa Alliance.
Definition: LoRaWAN.cpp:2692
-
LoRaWANNode::setDutyCycle
void setDutyCycle(bool enable=true, RadioLibTime_t msPerHour=0)
Toggle adherence to dutyCycle limits to on or off.
Definition: LoRaWAN.cpp:2669
+
LoRaWANNode::setCSMA
void setCSMA(bool csmaEnabled, uint8_t maxChanges=4, uint8_t backoffMax=0, uint8_t difsSlots=2)
Configures CSMA for LoRaWAN as per TR013, LoRa Alliance.
Definition: LoRaWAN.cpp:2691
+
LoRaWANNode::setDutyCycle
void setDutyCycle(bool enable=true, RadioLibTime_t msPerHour=0)
Toggle adherence to dutyCycle limits to on or off.
Definition: LoRaWAN.cpp:2668
LoRaWANNode::beginABP
int16_t beginABP(uint32_t addr, uint8_t *fNwkSIntKey, uint8_t *sNwkSIntKey, uint8_t *nwkSEncKey, uint8_t *appSKey)
Set the device credentials and activation configuration.
Definition: LoRaWAN.cpp:611
-
LoRaWANNode::timeUntilUplink
RadioLibTime_t timeUntilUplink()
Returns time in milliseconds until next uplink is available under dutyCycle limits.
Definition: LoRaWAN.cpp:3206
-
LoRaWANNode::setDeviceStatus
void setDeviceStatus(uint8_t battLevel)
Set device status.
Definition: LoRaWAN.cpp:2706
-
LoRaWANNode::dutyCycleInterval
RadioLibTime_t dutyCycleInterval(RadioLibTime_t msPerHour, RadioLibTime_t airtime)
Calculate the minimum interval to adhere to a certain dutyCycle. This interval is based on the ToA of...
Definition: LoRaWAN.cpp:3196
-
LoRaWANNode::setDwellTime
void setDwellTime(bool enable, RadioLibTime_t msPerUplink=0)
Toggle adherence to dwellTime limits to on or off.
Definition: LoRaWAN.cpp:2681
-
LoRaWANNode::getAFCntDown
uint32_t getAFCntDown()
Returns the last application downlink's frame counter; also 0 if no application downlink occured yet.
Definition: LoRaWAN.cpp:2726
-
LoRaWANNode::getLastToA
RadioLibTime_t getLastToA()
Get the Time-on-air of the last uplink message (in milliseconds).
Definition: LoRaWAN.cpp:2739
+
LoRaWANNode::timeUntilUplink
RadioLibTime_t timeUntilUplink()
Returns time in milliseconds until next uplink is available under dutyCycle limits.
Definition: LoRaWAN.cpp:3205
+
LoRaWANNode::setDeviceStatus
void setDeviceStatus(uint8_t battLevel)
Set device status.
Definition: LoRaWAN.cpp:2705
+
LoRaWANNode::dutyCycleInterval
RadioLibTime_t dutyCycleInterval(RadioLibTime_t msPerHour, RadioLibTime_t airtime)
Calculate the minimum interval to adhere to a certain dutyCycle. This interval is based on the ToA of...
Definition: LoRaWAN.cpp:3195
+
LoRaWANNode::setDwellTime
void setDwellTime(bool enable, RadioLibTime_t msPerUplink=0)
Toggle adherence to dwellTime limits to on or off.
Definition: LoRaWAN.cpp:2680
+
LoRaWANNode::getAFCntDown
uint32_t getAFCntDown()
Returns the last application downlink's frame counter; also 0 if no application downlink occured yet.
Definition: LoRaWAN.cpp:2725
+
LoRaWANNode::getLastToA
RadioLibTime_t getLastToA()
Get the Time-on-air of the last uplink message (in milliseconds).
Definition: LoRaWAN.cpp:2738
LoRaWANNode::activateABP
int16_t activateABP(uint8_t initialDr=RADIOLIB_LORAWAN_DATA_RATE_UNUSED)
Join network by restoring ABP session or performing over-the-air activation. In this procedure,...
Definition: LoRaWAN.cpp:952
LoRaWANNode::TS009
bool TS009
TS009 Protocol Specification Verification switch (allows FPort 224 and cuts off uplink payload instea...
Definition: LoRaWAN.h:845
LoRaWANNode::getBufferNonces
uint8_t * getBufferNonces()
Returns the pointer to the internal buffer that holds the LW base parameters.
Definition: LoRaWAN.cpp:228
LoRaWANNode::getBufferSession
uint8_t * getBufferSession()
Returns the pointer to the internal buffer that holds the LW session parameters.
Definition: LoRaWAN.cpp:434
LoRaWANNode::isActivated
bool isActivated()
Whether there is an ongoing session active.
Definition: LoRaWAN.cpp:1043
-
LoRaWANNode::setTxPower
int16_t setTxPower(int8_t txPower)
Configure TX power of the radio module.
Definition: LoRaWAN.cpp:2612
-
LoRaWANNode::getMacDeviceTimeAns
int16_t getMacDeviceTimeAns(uint32_t *gpsEpoch, uint8_t *fraction, bool returnUnix=true)
Returns the network time after requesting a DeviceTime MAC command. Returns 'true' if a network respo...
Definition: LoRaWAN.cpp:2430
-
LoRaWANNode::getNFCntDown
uint32_t getNFCntDown()
Returns the last network downlink's frame counter; also 0 if no network downlink occured yet.
Definition: LoRaWAN.cpp:2722
+
LoRaWANNode::setTxPower
int16_t setTxPower(int8_t txPower)
Configure TX power of the radio module.
Definition: LoRaWAN.cpp:2611
+
LoRaWANNode::getMacDeviceTimeAns
int16_t getMacDeviceTimeAns(uint32_t *gpsEpoch, uint8_t *fraction, bool returnUnix=true)
Returns the network time after requesting a DeviceTime MAC command. Returns 'true' if a network respo...
Definition: LoRaWAN.cpp:2429
+
LoRaWANNode::getNFCntDown
uint32_t getNFCntDown()
Returns the last network downlink's frame counter; also 0 if no network downlink occured yet.
Definition: LoRaWAN.cpp:2721
LoRaWANNode::setBufferSession
int16_t setBufferSession(uint8_t *persistentBuffer)
Fill the internal buffer that holds the LW session parameters with a supplied buffer.
Definition: LoRaWAN.cpp:458
LoRaWANNode::LoRaWANNode
LoRaWANNode(PhysicalLayer *phy, const LoRaWANBand_t *band, uint8_t subBand=0)
Default constructor.
Definition: LoRaWAN.cpp:9
-
LoRaWANNode::getMaxPayloadLen
uint8_t getMaxPayloadLen()
Returns the maximum allowed uplink payload size given the current MAC state. Most importantly,...
Definition: LoRaWAN.cpp:3215
+
LoRaWANNode::getMaxPayloadLen
uint8_t getMaxPayloadLen()
Returns the maximum allowed uplink payload size given the current MAC state. Most importantly,...
Definition: LoRaWAN.cpp:3214
LoRaWANNode::activateOTAA
virtual int16_t activateOTAA(uint8_t initialDr=RADIOLIB_LORAWAN_DATA_RATE_UNUSED, LoRaWANJoinEvent_t *joinEvent=NULL)
Join network by restoring OTAA session or performing over-the-air activation. By this procedure,...
Definition: LoRaWAN.cpp:865
LoRaWANNode::beginOTAA
int16_t beginOTAA(uint64_t joinEUI, uint64_t devEUI, uint8_t *nwkKey, uint8_t *appKey)
Set the device credentials and activation configuration.
Definition: LoRaWAN.cpp:582
-
LoRaWANNode::getFCntUp
uint32_t getFCntUp()
Returns the last uplink's frame counter; also 0 if no uplink occured yet.
Definition: LoRaWAN.cpp:2715
-
LoRaWANNode::setRx2Dr
int16_t setRx2Dr(uint8_t dr)
Configure the Rx2 datarate for ABP mode. This should not be needed for LoRaWAN 1.1 as it is configure...
Definition: LoRaWAN.cpp:2638
-
LoRaWANNode::sendMacCommandReq
int16_t sendMacCommandReq(uint8_t cid)
Add a MAC command to the uplink queue. Only LinkCheck and DeviceTime are available to the user....
Definition: LoRaWAN.cpp:2395
-
LoRaWANNode::getMacLinkCheckAns
int16_t getMacLinkCheckAns(uint8_t *margin, uint8_t *gwCnt)
Returns the quality of connectivity after requesting a LinkCheck MAC command. Returns 'true' if a net...
Definition: LoRaWAN.cpp:2419
-
LoRaWANNode::setADR
void setADR(bool enable=true)
Toggle ADR to on or off.
Definition: LoRaWAN.cpp:2665
-
LoRaWANNode::getDevAddr
uint32_t getDevAddr()
Returns the DevAddr of the device, regardless of OTAA or ABP mode.
Definition: LoRaWAN.cpp:2735
-
LoRaWANNode::resetFCntDown
void resetFCntDown()
Reset the downlink frame counters (application and network) This is unsafe and can possibly allow rep...
Definition: LoRaWAN.cpp:2730
+
LoRaWANNode::getFCntUp
uint32_t getFCntUp()
Returns the last uplink's frame counter; also 0 if no uplink occured yet.
Definition: LoRaWAN.cpp:2714
+
LoRaWANNode::setRx2Dr
int16_t setRx2Dr(uint8_t dr)
Configure the Rx2 datarate for ABP mode. This should not be needed for LoRaWAN 1.1 as it is configure...
Definition: LoRaWAN.cpp:2637
+
LoRaWANNode::sendMacCommandReq
int16_t sendMacCommandReq(uint8_t cid)
Add a MAC command to the uplink queue. Only LinkCheck and DeviceTime are available to the user....
Definition: LoRaWAN.cpp:2394
+
LoRaWANNode::getMacLinkCheckAns
int16_t getMacLinkCheckAns(uint8_t *margin, uint8_t *gwCnt)
Returns the quality of connectivity after requesting a LinkCheck MAC command. Returns 'true' if a net...
Definition: LoRaWAN.cpp:2418
+
LoRaWANNode::setADR
void setADR(bool enable=true)
Toggle ADR to on or off.
Definition: LoRaWAN.cpp:2664
+
LoRaWANNode::getDevAddr
uint32_t getDevAddr()
Returns the DevAddr of the device, regardless of OTAA or ABP mode.
Definition: LoRaWAN.cpp:2734
+
LoRaWANNode::resetFCntDown
void resetFCntDown()
Reset the downlink frame counters (application and network) This is unsafe and can possibly allow rep...
Definition: LoRaWAN.cpp:2729
PhysicalLayer
Provides common interface for protocols that run on LoRa/FSK modules, such as RTTY or LoRaWAN....
Definition: PhysicalLayer.h:135
RadioLibTime_t
unsigned long RadioLibTime_t
Type used for durations in RadioLib.
Definition: TypeDef.h:616
LoRaWANBand_t
Structure to save information about LoRaWAN band.
Definition: LoRaWAN.h:375