Removed CC1101 example fixed length as too specific

examples/CC1101/CC1101_Receive_Fixed/CC1101_Receive_Fixed.ino

@@ -1,98 +0,0 @@
-/*
-   RadioLib CC1101 Receive Example (fixed length mode)
-
-   This example receives packets using CC1101 FSK radio module.
-   To successfully receive data, the following settings have to be the same
-   on both transmitter and receiver:
-    - carrier frequency
-    - bit rate
-    - frequency deviation
-    - sync word
-
-   For full API reference, see the GitHub Pages
-   https://jgromes.github.io/RadioLib/
-*/
-
-// receive 9 bytes of payload after the sync word
-#define FIXED_PKT_LEN 9
-
-// include the library
-#include <RadioLib.h>
-
-// CC1101 has the following connections:
-// NSS pin:   10
-// GDO0 pin:  2
-// GDO2 pin:  3
-CC1101 cc = new Module(10, 2, 3);
-
-// or using RadioShield
-// https://github.com/jgromes/RadioShield
-//CC1101 cc = RadioShield.ModuleA;
-
-void setup() {
-  Serial.begin(9600);
-
-  // initialize CC1101 with default settings
-  Serial.print(F("[CC1101] Initializing ... "));
-  // carrier frequency:                   868.0 MHz
-  // bit rate:                            4.8 kbps
-  // Rx bandwidth:                        325.0 kHz
-  // frequency deviation:                 48.0 kHz
-  // sync word:                           0xD391
-  int state = cc.begin();
-
-  // Fixed packet length mode (non-default setting)
-  state = cc.fixedPacketLengthMode(FIXED_PKT_LEN);
-
-  if (state == ERR_NONE) {
-    Serial.println(F("success!"));
-  } else {
-    Serial.print(F("failed, code "));
-    Serial.println(state);
-    while (true);
-  }
-}
-
-void loop() {
-  Serial.print(F("[CC1101] Waiting for incoming transmission ... "));
-
-  // you can receive data as an Arduino String
-  String str;
-  int state = cc.receive(str);
-
-  // you can also receive data as byte array
-  /*
-    byte byteArr[8];
-    int state = cc.receive(byteArr, 8);
-  */
-
-  if (state == ERR_NONE) {
-    // packet was successfully received
-    Serial.println(F("success!"));
-
-    // print the data of the packet
-    Serial.print(F("[CC1101] Data:\t\t"));
-    Serial.println(str);
-
-    // print RSSI (Received Signal Strength Indicator)
-    // of the last received packet
-    Serial.print(F("[CC1101] RSSI:\t\t"));
-    Serial.print(cc.getRSSI());
-    Serial.println(F(" dBm"));
-
-    // print LQI (Link Quality Indicator)
-    // of the last received packet, lower is better
-    Serial.print(F("[CC1101] LQI:\t\t"));
-    Serial.println(cc.getLQI());
-
-  } else if (state == ERR_CRC_MISMATCH) {
-    // packet was received, but is malformed
-    Serial.println(F("CRC error!"));
-
-  } else {
-    // some other error occurred
-    Serial.print(F("failed, code "));
-    Serial.println(state);
-
-  }
-}