diff --git a/_s_t_m32_w_lx_8h_source.html b/_s_t_m32_w_lx_8h_source.html index 1cf9fb27..2d62f6d5 100644 --- a/_s_t_m32_w_lx_8h_source.html +++ b/_s_t_m32_w_lx_8h_source.html @@ -169,7 +169,7 @@ $(document).ready(function(){initNavTree('_s_t_m32_w_lx_8h_source.html',''); ini
STM32WLx::MODE_IDLE
@ MODE_IDLE
Definition: STM32WLx.h:57
STM32WLx::beginFSK
int16_t beginFSK(float freq=434.0, float br=4.8, float freqDev=5.0, float rxBw=156.2, int8_t power=10, uint16_t preambleLength=16, float tcxoVoltage=1.6, bool useRegulatorLDO=false)
Initialization method for FSK modem.
Definition: STM32WLx.cpp:31
SX1262
Derived class for SX1262 modules.
Definition: SX1262.h:23
-
SX126x::setRfSwitchTable
void setRfSwitchTable(const RADIOLIB_PIN_TYPE(&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[])
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: SX126x.cpp:1362
+
SX126x::setRfSwitchTable
void setRfSwitchTable(const RADIOLIB_PIN_TYPE(&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[])
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: SX126x.cpp:1368
diff --git a/_s_x126x_8h_source.html b/_s_x126x_8h_source.html index b0cf8166..2f611b11 100644 --- a/_s_x126x_8h_source.html +++ b/_s_x126x_8h_source.html @@ -768,19 +768,19 @@ $(document).ready(function(){initNavTree('_s_x126x_8h_source.html',''); initResi
SX126x::startReceive
int16_t startReceive(uint32_t timeout=RADIOLIB_SX126X_RX_TIMEOUT_INF, uint16_t irqFlags=RADIOLIB_SX126X_IRQ_RX_DEFAULT, uint16_t irqMask=RADIOLIB_SX126X_IRQ_RX_DONE, size_t len=0)
Interrupt-driven receive method. DIO1 will be activated when full packet is received.
Definition: SX126x.cpp:539
SX126x::startChannelScan
int16_t startChannelScan(uint8_t symbolNum=RADIOLIB_SX126X_CAD_PARAM_DEFAULT, uint8_t detPeak=RADIOLIB_SX126X_CAD_PARAM_DEFAULT, uint8_t detMin=RADIOLIB_SX126X_CAD_PARAM_DEFAULT)
Interrupt-driven channel activity detection method. DIO0 will be activated when LoRa preamble is dete...
Definition: SX126x.cpp:688
SX126x::setDataShaping
int16_t setDataShaping(uint8_t sh) override
Sets time-bandwidth product of Gaussian filter applied for shaping. Allowed values are RADIOLIB_SHAPI...
Definition: SX126x.cpp:1000
-
SX126x::setRegulatorLDO
int16_t setRegulatorLDO()
Set regulator mode to LDO.
Definition: SX126x.cpp:1346
-
SX126x::setRfSwitchPins
void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn)
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: SX126x.cpp:1358
-
SX126x::uploadPatch
int16_t uploadPatch(const uint32_t *patch, size_t len, bool nonvolatile=true)
Upload binary patch into the SX126x device RAM. Patch is needed to e.g., enable spectral scan and mus...
Definition: SX126x.cpp:1418
-
SX126x::setEncoding
int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Available in FSK mode only. Serves only as alias for PhysicalLayer compat...
Definition: SX126x.cpp:1354
+
SX126x::setRegulatorLDO
int16_t setRegulatorLDO()
Set regulator mode to LDO.
Definition: SX126x.cpp:1352
+
SX126x::setRfSwitchPins
void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn)
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: SX126x.cpp:1364
+
SX126x::uploadPatch
int16_t uploadPatch(const uint32_t *patch, size_t len, bool nonvolatile=true)
Upload binary patch into the SX126x device RAM. Patch is needed to e.g., enable spectral scan and mus...
Definition: SX126x.cpp:1424
+
SX126x::setEncoding
int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Available in FSK mode only. Serves only as alias for PhysicalLayer compat...
Definition: SX126x.cpp:1360
SX126x::beginFSK
int16_t beginFSK(float br, float freqDev, float rxBw, uint16_t preambleLength, float tcxoVoltage, bool useRegulatorLDO=false)
Initialization method for FSK modem.
Definition: SX126x.cpp:95
SX126x::setBandwidth
int16_t setBandwidth(float bw)
Sets LoRa bandwidth. Allowed values are 7.8, 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125....
Definition: SX126x.cpp:735
-
SX126x::explicitHeader
int16_t explicitHeader()
Set explicit header mode for future reception/transmission.
Definition: SX126x.cpp:1342
-
SX126x::forceLDRO
int16_t forceLDRO(bool enable)
Forces LoRa low data rate optimization. Only available in LoRa mode. After calling this method,...
Definition: SX126x.cpp:1366
+
SX126x::explicitHeader
int16_t explicitHeader()
Set explicit header mode for future reception/transmission.
Definition: SX126x.cpp:1348
+
SX126x::forceLDRO
int16_t forceLDRO(bool enable)
Forces LoRa low data rate optimization. Only available in LoRa mode. After calling this method,...
Definition: SX126x.cpp:1372
SX126x::setNodeAddress
int16_t setNodeAddress(uint8_t nodeAddr)
Sets node address. Calling this method will also enable address filtering for node address only.
Definition: SX126x.cpp:1080
-
SX126x::spectralScanGetStatus
int16_t spectralScanGetStatus()
Read the status of spectral scan.
Definition: SX126x.cpp:1487
-
SX126x::setTCXO
int16_t setTCXO(float voltage, uint32_t delay=5000)
Sets TCXO (Temperature Compensated Crystal Oscillator) configuration.
Definition: SX126x.cpp:1507
+
SX126x::spectralScanGetStatus
int16_t spectralScanGetStatus()
Read the status of spectral scan.
Definition: SX126x.cpp:1493
+
SX126x::setTCXO
int16_t setTCXO(float voltage, uint32_t delay=5000)
Sets TCXO (Temperature Compensated Crystal Oscillator) configuration.
Definition: SX126x.cpp:1513
SX126x::setRxBandwidth
int16_t setRxBandwidth(float rxBw)
Sets FSK receiver bandwidth. Allowed values are 4.8, 5.8, 7.3, 9.7, 11.7, 14.6, 19....
Definition: SX126x.cpp:900
-
SX126x::setRegulatorDCDC
int16_t setRegulatorDCDC()
Set regulator mode to DC-DC.
Definition: SX126x.cpp:1350
+
SX126x::setRegulatorDCDC
int16_t setRegulatorDCDC()
Set regulator mode to DC-DC.
Definition: SX126x.cpp:1356
SX126x::startReceiveDutyCycle
int16_t startReceiveDutyCycle(uint32_t rxPeriod, uint32_t sleepPeriod, uint16_t irqFlags=RADIOLIB_SX126X_IRQ_RX_DEFAULT, uint16_t irqMask=RADIOLIB_SX126X_IRQ_RX_DONE)
Interrupt-driven receive method where the device mostly sleeps and periodically wakes to listen....
Definition: SX126x.cpp:553
SX126x::setWhitening
int16_t setWhitening(bool enabled, uint16_t initial=0x0100)
Sets FSK whitening parameters.
Definition: SX126x.cpp:1184
SX126x::clearDio1Action
void clearDio1Action()
Clears interrupt service routine to call when DIO1 activates.
Definition: SX126x.cpp:466
@@ -788,46 +788,46 @@ $(document).ready(function(){initNavTree('_s_x126x_8h_source.html',''); initResi
SX126x::standby
int16_t standby() override
Sets the module to standby mode (overload for PhysicalLayer compatibility, uses 13 MHz RC oscillator)...
Definition: SX126x.cpp:450
SX126x::setFrequencyDeviation
int16_t setFrequencyDeviation(float freqDev) override
Sets FSK frequency deviation. Allowed values range from 0.0 to 200.0 kHz.
Definition: SX126x.cpp:858
SX126x::setBitRate
int16_t setBitRate(float br)
Sets FSK bit rate. Allowed values range from 0.6 to 300.0 kbps.
Definition: SX126x.cpp:882
-
SX126x::getTimeOnAir
uint32_t getTimeOnAir(size_t len)
Get expected time-on-air for a given size of payload.
Definition: SX126x.cpp:1303
-
SX126x::randomByte
uint8_t randomByte()
Get one truly random byte from RSSI noise.
Definition: SX126x.cpp:1387
-
SX126x::spectralScanAbort
void spectralScanAbort()
Abort an ongoing spectral scan.
Definition: SX126x.cpp:1483
+
SX126x::getTimeOnAir
uint32_t getTimeOnAir(size_t len)
Get expected time-on-air for a given size of payload.
Definition: SX126x.cpp:1309
+
SX126x::randomByte
uint8_t randomByte()
Get one truly random byte from RSSI noise.
Definition: SX126x.cpp:1393
+
SX126x::spectralScanAbort
void spectralScanAbort()
Abort an ongoing spectral scan.
Definition: SX126x.cpp:1489
SX126x::receiveDirect
int16_t receiveDirect() override
Starts direct mode reception. Only implemented for PhysicalLayer compatibility, as SX126x series does...
Definition: SX126x.cpp:346
SX126x::finishTransmit
int16_t finishTransmit() override
Clean up after transmission is done.
Definition: SX126x.cpp:531
SX126x::setCurrentLimit
int16_t setCurrentLimit(float currentLimit)
Sets current protection limit. Can be set in 2.5 mA steps.
Definition: SX126x.cpp:823
SX126x::setRxBoostedGainMode
int16_t setRxBoostedGainMode(bool rxbgm, bool persist=true)
Enables or disables Rx Boosted Gain mode as described in SX126x datasheet section 9....
Definition: SX126x.cpp:963
SX126x::transmitDirect
int16_t transmitDirect(uint32_t frf=0) override
Starts direct mode transmission.
Definition: SX126x.cpp:330
-
SX126x::variablePacketLengthMode
int16_t variablePacketLengthMode(uint8_t maxLen=RADIOLIB_SX126X_MAX_PACKET_LENGTH)
Set modem in variable packet length mode. Available in FSK mode only.
Definition: SX126x.cpp:1299
+
SX126x::variablePacketLengthMode
int16_t variablePacketLengthMode(uint8_t maxLen=RADIOLIB_SX126X_MAX_PACKET_LENGTH)
Set modem in variable packet length mode. Available in FSK mode only.
Definition: SX126x.cpp:1305
SX126x::begin
int16_t begin(uint8_t cr, uint8_t syncWord, uint16_t preambleLength, float tcxoVoltage, bool useRegulatorLDO=false)
Initialization method for LoRa modem.
Definition: SX126x.cpp:13
SX126x::setCRC
int16_t setCRC(uint8_t len, uint16_t initial=0x1D0F, uint16_t polynomial=0x1021, bool inverted=true)
Sets CRC configuration.
Definition: SX126x.cpp:1125
-
SX126x::getIrqStatus
uint16_t getIrqStatus()
Reads the current IRQ status.
Definition: SX126x.cpp:1663
+
SX126x::getIrqStatus
uint16_t getIrqStatus()
Reads the current IRQ status.
Definition: SX126x.cpp:1669
SX126x::reset
int16_t reset(bool verify=true)
Reset method. Will reset the chip to the default state using RST pin.
Definition: SX126x.cpp:189
SX126x::setSyncWord
int16_t setSyncWord(uint8_t syncWord, uint8_t controlBits=0x44)
Sets LoRa sync word.
Definition: SX126x.cpp:812
SX126x::getCurrentLimit
float getCurrentLimit()
Reads current protection limit.
Definition: SX126x.cpp:836
SX126x::SX126x
SX126x(Module *mod)
Default constructor.
Definition: SX126x.cpp:4
SX126x::setPreambleLength
int16_t setPreambleLength(uint16_t preambleLength)
Sets preamble length for LoRa or FSK modem. Allowed values range from 1 to 65535.
Definition: SX126x.cpp:845
SX126x::transmit
int16_t transmit(__FlashStringHelper *fstr, uint8_t addr=0)
Arduino Flash String transmit method.
Definition: PhysicalLayer.cpp:12
-
SX126x::autoLDRO
int16_t autoLDRO()
Re-enables automatic LDRO configuration. Only available in LoRa mode. After calling this method,...
Definition: SX126x.cpp:1378
-
SX126x::setDirectAction
void setDirectAction(void(*func)(void))
Set interrupt service routine function to call when data bit is receveid in direct mode.
Definition: SX126x.cpp:1409
-
SX126x::fixedPacketLengthMode
int16_t fixedPacketLengthMode(uint8_t len=RADIOLIB_SX126X_MAX_PACKET_LENGTH)
Set modem in fixed packet length mode. Available in FSK mode only.
Definition: SX126x.cpp:1295
+
SX126x::autoLDRO
int16_t autoLDRO()
Re-enables automatic LDRO configuration. Only available in LoRa mode. After calling this method,...
Definition: SX126x.cpp:1384
+
SX126x::setDirectAction
void setDirectAction(void(*func)(void))
Set interrupt service routine function to call when data bit is receveid in direct mode.
Definition: SX126x.cpp:1415
+
SX126x::fixedPacketLengthMode
int16_t fixedPacketLengthMode(uint8_t len=RADIOLIB_SX126X_MAX_PACKET_LENGTH)
Set modem in fixed packet length mode. Available in FSK mode only.
Definition: SX126x.cpp:1301
SX126x::setBroadcastAddress
int16_t setBroadcastAddress(uint8_t broadAddr)
Sets broadcast address. Calling this method will also enable address filtering for node and broadcast...
Definition: SX126x.cpp:1097
SX126x::getChannelScanResult
int16_t getChannelScanResult()
Read the channel scan result.
Definition: SX126x.cpp:714
SX126x::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: SX126x.cpp:1288
SX126x::setSyncBits
int16_t setSyncBits(uint8_t *syncWord, uint8_t bitsLen)
Sets FSK sync word in the form of array of up to 8 bytes.
Definition: SX126x.cpp:1053
SX126x::getDataRate
float getDataRate() const
Gets effective data rate for the last transmitted packet. The value is calculated only for payload by...
Definition: SX126x.cpp:1221
-
SX126x::spectralScanStart
int16_t spectralScanStart(uint16_t numSamples, uint8_t window=RADIOLIB_SX126x_SPECTRAL_SCAN_WINDOW_DEFAULT, uint8_t interval=RADIOLIB_SX126X_SCAN_INTERVAL_8_20_US)
Start spectral scan. Requires binary path to be uploaded.
Definition: SX126x.cpp:1467
-
SX126x::setRfSwitchTable
void setRfSwitchTable(const RADIOLIB_PIN_TYPE(&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[])
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: SX126x.cpp:1362
+
SX126x::spectralScanStart
int16_t spectralScanStart(uint16_t numSamples, uint8_t window=RADIOLIB_SX126x_SPECTRAL_SCAN_WINDOW_DEFAULT, uint8_t interval=RADIOLIB_SX126X_SCAN_INTERVAL_8_20_US)
Start spectral scan. Requires binary path to be uploaded.
Definition: SX126x.cpp:1473
+
SX126x::setRfSwitchTable
void setRfSwitchTable(const RADIOLIB_PIN_TYPE(&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[])
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: SX126x.cpp:1368
SX126x::XTAL
bool XTAL
Whether the module has an XTAL (true) or TCXO (false). Defaults to false.
Definition: SX126x.h:452
-
SX126x::implicitHeader
int16_t implicitHeader(size_t len)
Set implicit header mode for future reception/transmission.
Definition: SX126x.cpp:1338
+
SX126x::implicitHeader
int16_t implicitHeader(size_t len)
Set implicit header mode for future reception/transmission.
Definition: SX126x.cpp:1344
SX126x::getSNR
float getSNR()
Gets SNR (Signal to Noise Ratio) of the last received packet. Only available for LoRa modem.
Definition: SX126x.cpp:1239
-
SX126x::setDio2AsRfSwitch
int16_t setDio2AsRfSwitch(bool enable=true)
Set DIO2 to function as RF switch (default in Semtech example designs).
Definition: SX126x.cpp:1560
-
SX126x::spectralScanGetResult
int16_t spectralScanGetResult(uint16_t *results)
Read the result of spectral scan.
Definition: SX126x.cpp:1495
+
SX126x::setDio2AsRfSwitch
int16_t setDio2AsRfSwitch(bool enable=true)
Set DIO2 to function as RF switch (default in Semtech example designs).
Definition: SX126x.cpp:1566
+
SX126x::spectralScanGetResult
int16_t spectralScanGetResult(uint16_t *results)
Read the result of spectral scan.
Definition: SX126x.cpp:1501
SX126x::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf)
Sets LoRa spreading factor. Allowed values range from 5 to 12.
Definition: SX126x.cpp:786
SX126x::readData
int16_t readData(String &str, size_t len=0)
Reads data that was received after calling startReceive method.
Definition: PhysicalLayer.cpp:153
SX126x::startTransmit
int16_t startTransmit(String &str, uint8_t addr=0)
Interrupt-driven Arduino String transmit method. Unlike the standard transmit method,...
Definition: PhysicalLayer.cpp:134
SX126x::receive
int16_t receive(String &str, size_t len=0)
Arduino String receive method.
Definition: PhysicalLayer.cpp:60
SX126x::disableAddressFiltering
int16_t disableAddressFiltering()
Disables address filtering. Calling this method will also erase previously set addresses.
Definition: SX126x.cpp:1114
SX126x::setCodingRate
int16_t setCodingRate(uint8_t cr)
Sets LoRa coding rate denominator. Allowed values range from 5 to 8.
Definition: SX126x.cpp:799
-
SX126x::readBit
void readBit(RADIOLIB_PIN_TYPE pin)
Function to read and process data bit in direct reception mode.
Definition: SX126x.cpp:1413
+
SX126x::readBit
void readBit(RADIOLIB_PIN_TYPE pin)
Function to read and process data bit in direct reception mode.
Definition: SX126x.cpp:1419
Module::RfSwitchMode_t
Definition: Module.h:42
diff --git a/_s_x128x_8h_source.html b/_s_x128x_8h_source.html index 89266be7..fa26d897 100644 --- a/_s_x128x_8h_source.html +++ b/_s_x128x_8h_source.html @@ -630,48 +630,48 @@ $(document).ready(function(){initNavTree('_s_x128x_8h_source.html',''); initResi
SX128x::setSyncWord
int16_t setSyncWord(uint8_t *syncWord, uint8_t len)
Sets FSK/FLRC sync word in the form of array of up to 5 bytes (FSK). For FLRC modem,...
Definition: SX128x.cpp:899
SX128x::setPreambleLength
int16_t setPreambleLength(uint32_t preambleLength)
Sets preamble length for currently active modem. Allowed values range from 1 to 65535.
Definition: SX128x.cpp:731
SX128x::setFrequency
int16_t setFrequency(float freq)
Sets carrier frequency. Allowed values are in range from 2400.0 to 2500.0 MHz.
Definition: SX128x.cpp:625
-
SX128x::getTimeOnAir
uint32_t getTimeOnAir(size_t len)
Get expected time-on-air for a given size of payload.
Definition: SX128x.cpp:1190
+
SX128x::getTimeOnAir
uint32_t getTimeOnAir(size_t len)
Get expected time-on-air for a given size of payload.
Definition: SX128x.cpp:1196
SX128x::reset
int16_t reset(bool verify=true)
Reset method. Will reset the chip to the default state using RST pin.
Definition: SX128x.cpp:262
SX128x::setFrequencyDeviation
int16_t setFrequencyDeviation(float freqDev) override
Sets FSK frequency deviation. Allowed values range from 0.0 to 3200.0 kHz.
Definition: SX128x.cpp:836
SX128x::getFrequencyError
float getFrequencyError()
Gets frequency error of the latest received packet.
Definition: SX128x.cpp:1150
SX128x::standby
int16_t standby() override
Sets the module to standby mode (overload for PhysicalLayer compatibility, uses 13 MHz RC oscillator)...
Definition: SX128x.cpp:457
-
SX128x::readBit
void readBit(RADIOLIB_PIN_TYPE pin)
Dummy method, to ensure PhysicalLayer compatibility.
Definition: SX128x.cpp:1287
+
SX128x::readBit
void readBit(RADIOLIB_PIN_TYPE pin)
Dummy method, to ensure PhysicalLayer compatibility.
Definition: SX128x.cpp:1293
SX128x::beginBLE
int16_t beginBLE(float freq=2400.0, uint16_t br=800, float freqDev=400.0, int8_t power=10, uint8_t dataShaping=RADIOLIB_SHAPING_0_5)
Initialization method for BLE modem.
Definition: SX128x.cpp:142
SX128x::setGainControl
int16_t setGainControl(uint8_t gain=0)
Enables or disables receiver manual gain control.
Definition: SX128x.cpp:1070
SX128x::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: SX128x.cpp:1183
SX128x::finishTransmit
int16_t finishTransmit() override
Clean up after transmission is done.
Definition: SX128x.cpp:541
SX128x::setBitRate
int16_t setBitRate(float br)
Sets FSK or FLRC bit rate. Allowed values are 125, 250, 400, 500, 800, 1000, 1600 and 2000 kbps (for ...
Definition: SX128x.cpp:779
SX128x::transmitDirect
int16_t transmitDirect(uint32_t frf=0) override
Starts direct mode transmission.
Definition: SX128x.cpp:373
-
SX128x::setRfSwitchPins
void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn)
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: SX128x.cpp:1266
+
SX128x::setRfSwitchPins
void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn)
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: SX128x.cpp:1272
SX128x::setHighSensitivityMode
int16_t setHighSensitivityMode(bool hsm=false)
Enables or disables receiver high sensitivity mode.
Definition: SX128x.cpp:1053
SX128x::startReceive
int16_t startReceive(uint16_t timeout=RADIOLIB_SX128X_RX_TIMEOUT_INF, uint16_t irqFlags=RADIOLIB_SX128X_IRQ_RX_DEFAULT, uint16_t irqMask=RADIOLIB_SX128X_IRQ_RX_DONE, size_t len=0)
Interrupt-driven receive method. DIO1 will be activated when full packet is received.
Definition: SX128x.cpp:549
-
SX128x::setEncoding
int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Serves only as alias for PhysicalLayer compatibility.
Definition: SX128x.cpp:1262
+
SX128x::setEncoding
int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Serves only as alias for PhysicalLayer compatibility.
Definition: SX128x.cpp:1268
SX128x::scanChannel
int16_t scanChannel()
Performs scan for LoRa transmission in the current channel. Detects both preamble and payload.
Definition: SX128x.cpp:396
SX128x::getSNR
float getSNR()
Gets SNR (Signal to Noise Ratio) of the last received packet. Only available for LoRa or ranging mode...
Definition: SX128x.cpp:1130
SX128x::setWhitening
int16_t setWhitening(bool enabled)
Sets whitening parameters, not available for LoRa or FLRC modem.
Definition: SX128x.cpp:1022
SX128x::beginGFSK
int16_t beginGFSK(float freq=2400.0, uint16_t br=800, float freqDev=400.0, int8_t power=10, uint16_t preambleLength=16)
Initialization method for GFSK modem.
Definition: SX128x.cpp:73
SX128x::setAccessAddress
int16_t setAccessAddress(uint32_t addr)
Sets BLE access address.
Definition: SX128x.cpp:1042
-
SX128x::explicitHeader
int16_t explicitHeader()
Set explicit header mode for future reception/transmission.
Definition: SX128x.cpp:1258
+
SX128x::explicitHeader
int16_t explicitHeader()
Set explicit header mode for future reception/transmission.
Definition: SX128x.cpp:1264
SX128x::getRSSI
float getRSSI()
Gets RSSI (Recorded Signal Strength Indicator) of the last received packet.
Definition: SX128x.cpp:1106
-
SX128x::randomByte
uint8_t randomByte()
Dummy random method, to ensure PhysicalLayer compatibility.
Definition: SX128x.cpp:1274
+
SX128x::randomByte
uint8_t randomByte()
Dummy random method, to ensure PhysicalLayer compatibility.
Definition: SX128x.cpp:1280
SX128x::setDataShaping
int16_t setDataShaping(uint8_t sh) override
Sets time-bandwidth product of Gaussian filter applied for shaping. Allowed values are RADIOLIB_SHAPI...
Definition: SX128x.cpp:869
SX128x::SX128x
SX128x(Module *mod)
Default constructor.
Definition: SX128x.cpp:4
SX128x::setCodingRate
int16_t setCodingRate(uint8_t cr, bool longInterleaving=false)
Sets LoRa coding rate denominator. Allowed values range from 5 to 8.
Definition: SX128x.cpp:697
SX128x::setCRC
int16_t setCRC(uint8_t len, uint32_t initial=0x1D0F, uint16_t polynomial=0x1021)
Sets CRC configuration.
Definition: SX128x.cpp:958
SX128x::transmit
int16_t transmit(__FlashStringHelper *fstr, uint8_t addr=0)
Arduino Flash String transmit method.
Definition: PhysicalLayer.cpp:12
SX128x::clearDio1Action
void clearDio1Action()
Clears interrupt service routine to call when DIO1 activates.
Definition: SX128x.cpp:473
-
SX128x::implicitHeader
int16_t implicitHeader(size_t len)
Set implicit header mode for future reception/transmission.
Definition: SX128x.cpp:1254
+
SX128x::implicitHeader
int16_t implicitHeader(size_t len)
Set implicit header mode for future reception/transmission.
Definition: SX128x.cpp:1260
SX128x::beginFLRC
int16_t beginFLRC(float freq=2400.0, uint16_t br=650, uint8_t cr=3, int8_t power=10, uint16_t preambleLength=16, uint8_t dataShaping=RADIOLIB_SHAPING_0_5)
Initialization method for FLRC modem.
Definition: SX128x.cpp:197
SX128x::begin
int16_t begin(float freq=2400.0, float bw=812.5, uint8_t sf=9, uint8_t cr=7, uint8_t syncWord=RADIOLIB_SX128X_SYNC_WORD_PRIVATE, int8_t power=10, uint16_t preambleLength=12)
Initialization method for LoRa modem.
Definition: SX128x.cpp:12
SX128x::setOutputPower
int16_t setOutputPower(int8_t power)
Sets output power. Allowed values are in range from -18 to 13 dBm.
Definition: SX128x.cpp:725
-
SX128x::setRfSwitchTable
void setRfSwitchTable(const RADIOLIB_PIN_TYPE(&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[])
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: SX128x.cpp:1270
-
SX128x::getIrqStatus
uint16_t getIrqStatus()
Reads the current IRQ status.
Definition: SX128x.cpp:1387
+
SX128x::setRfSwitchTable
void setRfSwitchTable(const RADIOLIB_PIN_TYPE(&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[])
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: SX128x.cpp:1276
+
SX128x::getIrqStatus
uint16_t getIrqStatus()
Reads the current IRQ status.
Definition: SX128x.cpp:1393
SX128x::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf)
Sets LoRa spreading factor. Allowed values range from 5 to 12.
Definition: SX128x.cpp:663
SX128x::readData
int16_t readData(String &str, size_t len=0)
Reads data that was received after calling startReceive method.
Definition: PhysicalLayer.cpp:153
SX128x::setBandwidth
int16_t setBandwidth(float bw)
Sets LoRa bandwidth. Allowed values are 203.125, 406.25, 812.5 and 1625.0 kHz.
Definition: SX128x.cpp:633
SX128x::startTransmit
int16_t startTransmit(String &str, uint8_t addr=0)
Interrupt-driven Arduino String transmit method. Unlike the standard transmit method,...
Definition: PhysicalLayer.cpp:134
SX128x::receive
int16_t receive(String &str, size_t len=0)
Arduino String receive method.
Definition: PhysicalLayer.cpp:60
-
SX128x::setDirectAction
void setDirectAction(void(*func)(void))
Dummy method, to ensure PhysicalLayer compatibility.
Definition: SX128x.cpp:1281
+
SX128x::setDirectAction
void setDirectAction(void(*func)(void))
Dummy method, to ensure PhysicalLayer compatibility.
Definition: SX128x.cpp:1287
SX128x::receiveDirect
int16_t receiveDirect() override
Starts direct mode reception. Only implemented for PhysicalLayer compatibility, as SX128x series does...
Definition: SX128x.cpp:388
RADIOLIB_SHAPING_0_5
#define RADIOLIB_SHAPING_0_5
Gaussin shaping filter, BT = 0.5.
Definition: TypeDef.h:27
Module::RfSwitchMode_t
Definition: Module.h:42