From a31a028e4e84e678725fec3a32143232d36b0b35 Mon Sep 17 00:00:00 2001
From: jgromes <jgromes@users.noreply.github.com>
Date: Sat, 4 Jul 2020 12:02:35 +0200
Subject: [PATCH] [AFSK] Added links to default config wiki page
---
.../AFSK_Imperial_March.ino | 19 +++++++--------
examples/AFSK/AFSK_Tone/AFSK_Tone.ino | 23 ++++++++-----------
2 files changed, 18 insertions(+), 24 deletions(-)
diff --git a/examples/AFSK/AFSK_Imperial_March/AFSK_Imperial_March.ino b/examples/AFSK/AFSK_Imperial_March/AFSK_Imperial_March.ino
index 9b80046e..29469f48 100644
--- a/examples/AFSK/AFSK_Imperial_March/AFSK_Imperial_March.ino
+++ b/examples/AFSK/AFSK_Imperial_March/AFSK_Imperial_March.ino
@@ -10,6 +10,9 @@
- CC1101
- Si443x/RFM2x
+ For default module settings, see the wiki page
+ https://github.com/jgromes/RadioLib/wiki/Default-configuration
+
For full API reference, see the GitHub Pages
https://jgromes.github.io/RadioLib/
*/
@@ -25,7 +28,7 @@
// DIO0 pin: 2
// RESET pin: 9
// DIO1 pin: 3
-SX1278 fsk = new Module(10, 2, 9, 3);
+SX1278 radio = new Module(10, 2, 9, 3);
// create AFSK client instance using the FSK module
// this requires connection to the module direct
@@ -35,24 +38,18 @@ SX1278 fsk = new Module(10, 2, 9, 3);
// SX1231: DIO2
// CC1101: GDO2
// Si443x/RFM2x: GPIO
-AFSKClient audio(&fsk, 5);
+AFSKClient audio(&radio, 5);
void setup() {
Serial.begin(9600);
- // initialize SX1278
+ // initialize SX1278 with default settings
Serial.print(F("[SX1278] Initializing ... "));
- // carrier frequency: 434.0 MHz
- // bit rate: 48.0 kbps
- // frequency deviation: 50.0 kHz
- // Rx bandwidth: 125.0 kHz
- // output power: 13 dBm
- // current limit: 100 mA
- int state = fsk.beginFSK();
+ int state = radio.beginFSK();
// when using one of the non-LoRa modules for AFSK
// (RF69, CC1101,, Si4432 etc.), use the basic begin() method
- // int state = fsk.begin();
+ // int state = radio.begin();
if(state == ERR_NONE) {
Serial.println(F("success!"));
diff --git a/examples/AFSK/AFSK_Tone/AFSK_Tone.ino b/examples/AFSK/AFSK_Tone/AFSK_Tone.ino
index 09e66c28..43286f84 100644
--- a/examples/AFSK/AFSK_Tone/AFSK_Tone.ino
+++ b/examples/AFSK/AFSK_Tone/AFSK_Tone.ino
@@ -11,6 +11,9 @@
- CC1101
- Si443x/RFM2x
+ For default module settings, see the wiki page
+ https://github.com/jgromes/RadioLib/wiki/Default-configuration
+
For full API reference, see the GitHub Pages
https://jgromes.github.io/RadioLib/
*/
@@ -23,34 +26,28 @@
// DIO0 pin: 2
// RESET pin: 9
// DIO1 pin: 3
-SX1278 fsk = new Module(10, 2, 9, 3);
+SX1278 radio = new Module(10, 2, 9, 3);
// create AFSK client instance using the FSK module
-// this requires connection to the module direct
+// this requires connection to the module direct
// input pin, here connected to Arduino pin 5
// SX127x/RFM9x: DIO2
// RF69: DIO2
// SX1231: DIO2
// CC1101: GDO2
// Si443x/RFM2x: GPIO
-AFSKClient audio(&fsk, 5);
+AFSKClient audio(&radio, 5);
void setup() {
Serial.begin(9600);
- // initialize SX1278
+ // initialize SX1278 with default settings
Serial.print(F("[SX1278] Initializing ... "));
- // carrier frequency: 434.0 MHz
- // bit rate: 48.0 kbps
- // frequency deviation: 50.0 kHz
- // Rx bandwidth: 125.0 kHz
- // output power: 13 dBm
- // current limit: 100 mA
- int state = fsk.beginFSK();
+ int state = radio.beginFSK();
// when using one of the non-LoRa modules for AFSK
// (RF69, CC1101,, Si4432 etc.), use the basic begin() method
- // int state = fsk.begin();
+ // int state = radio.begin();
if(state == ERR_NONE) {
Serial.println(F("success!"));
@@ -62,7 +59,7 @@ void setup() {
}
void loop() {
- // AFSKClient can be used to transmit tones,
+ // AFSKClient can be used to transmit tones,
// same as Arduino tone() function
// 400 Hz tone