diff --git a/_lo_ra_w_a_n_8h_source.html b/_lo_ra_w_a_n_8h_source.html index c9377bae..2889a37d 100644 --- a/_lo_ra_w_a_n_8h_source.html +++ b/_lo_ra_w_a_n_8h_source.html @@ -783,38 +783,38 @@ $(document).ready(function(){initNavTree('_lo_ra_w_a_n_8h_source.html',''); init
1042 #endif
LoRaWANNode
LoRaWAN-compatible node (class A device).
Definition: LoRaWAN.h:498
LoRaWANNode::setBufferNonces
int16_t setBufferNonces(uint8_t *persistentBuffer)
Fill the internal buffer that holds the LW base parameters with a supplied buffer.
Definition: LoRaWAN.cpp:56
-
LoRaWANNode::setDatarate
int16_t setDatarate(uint8_t drUp)
Set uplink datarate. This should not be used when ADR is enabled.
Definition: LoRaWAN.cpp:1928
+
LoRaWANNode::setDatarate
int16_t setDatarate(uint8_t drUp)
Set uplink datarate. This should not be used when ADR is enabled.
Definition: LoRaWAN.cpp:1940
LoRaWANNode::uplink
int16_t uplink(const char *str, uint8_t fPort, bool isConfirmed=false, LoRaWANEvent_t *event=NULL)
Send a message to the server.
Definition: LoRaWAN.cpp:844
-
LoRaWANNode::maxPayloadDwellTime
uint8_t maxPayloadDwellTime()
Returns the maximum payload given the currently present dwell time limits. WARNING: the addition of M...
Definition: LoRaWAN.cpp:2008
+
LoRaWANNode::maxPayloadDwellTime
uint8_t maxPayloadDwellTime()
Returns the maximum payload given the currently present dwell time limits. WARNING: the addition of M...
Definition: LoRaWAN.cpp:2020
LoRaWANNode::beginABP
int16_t beginABP(uint32_t addr, uint8_t *fNwkSIntKey, uint8_t *sNwkSIntKey, uint8_t *nwkSEncKey, uint8_t *appSKey, bool force=false, uint8_t initialDr=RADIOLIB_LW_DATA_RATE_UNUSED)
Join network by performing activation by personalization. In this procedure, all necessary configurat...
Definition: LoRaWAN.cpp:724
-
LoRaWANNode::setDutyCycle
void setDutyCycle(bool enable=true, RadioLibTime_t msPerHour=0)
Toggle adherence to dutyCycle limits to on or off.
Definition: LoRaWAN.cpp:1969
-
LoRaWANNode::timeUntilUplink
RadioLibTime_t timeUntilUplink()
Returns time in milliseconds until next uplink is available under dutyCycle limits.
Definition: LoRaWAN.cpp:1990
-
LoRaWANNode::setDeviceStatus
void setDeviceStatus(uint8_t battLevel)
Set device status.
Definition: LoRaWAN.cpp:1622
-
LoRaWANNode::dutyCycleInterval
RadioLibTime_t dutyCycleInterval(RadioLibTime_t msPerHour, RadioLibTime_t airtime)
Calculate the minimum interval to adhere to a certain dutyCycle. This interval is based on the ToA of...
Definition: LoRaWAN.cpp:1980
-
LoRaWANNode::setDwellTime
void setDwellTime(bool enable, RadioLibTime_t msPerUplink=0)
Toggle adherence to dwellTime limits to on or off.
Definition: LoRaWAN.cpp:1999
-
LoRaWANNode::getAFCntDown
uint32_t getAFCntDown()
Returns the last application downlink's frame counter; also 0 if no application downlink occured yet.
Definition: LoRaWAN.cpp:1638
-
LoRaWANNode::getLastToA
RadioLibTime_t getLastToA()
Get the Time-on-air of the last uplink message.
Definition: LoRaWAN.cpp:2816
+
LoRaWANNode::setDutyCycle
void setDutyCycle(bool enable=true, RadioLibTime_t msPerHour=0)
Toggle adherence to dutyCycle limits to on or off.
Definition: LoRaWAN.cpp:1981
+
LoRaWANNode::timeUntilUplink
RadioLibTime_t timeUntilUplink()
Returns time in milliseconds until next uplink is available under dutyCycle limits.
Definition: LoRaWAN.cpp:2002
+
LoRaWANNode::setDeviceStatus
void setDeviceStatus(uint8_t battLevel)
Set device status.
Definition: LoRaWAN.cpp:1634
+
LoRaWANNode::dutyCycleInterval
RadioLibTime_t dutyCycleInterval(RadioLibTime_t msPerHour, RadioLibTime_t airtime)
Calculate the minimum interval to adhere to a certain dutyCycle. This interval is based on the ToA of...
Definition: LoRaWAN.cpp:1992
+
LoRaWANNode::setDwellTime
void setDwellTime(bool enable, RadioLibTime_t msPerUplink=0)
Toggle adherence to dwellTime limits to on or off.
Definition: LoRaWAN.cpp:2011
+
LoRaWANNode::getAFCntDown
uint32_t getAFCntDown()
Returns the last application downlink's frame counter; also 0 if no application downlink occured yet.
Definition: LoRaWAN.cpp:1650
+
LoRaWANNode::getLastToA
RadioLibTime_t getLastToA()
Get the Time-on-air of the last uplink message.
Definition: LoRaWAN.cpp:2828
LoRaWANNode::restore
int16_t restore(uint16_t checkSum, uint16_t lwMode, uint8_t lwClass, uint8_t freqPlan)
Restore session by loading information from persistent storage.
Definition: LoRaWAN.cpp:129
LoRaWANNode::saveSession
int16_t saveSession()
Save the current state of the session to the session buffer.
Definition: LoRaWAN.cpp:804
LoRaWANNode::getBufferNonces
uint8_t * getBufferNonces()
Returns the pointer to the internal buffer that holds the LW base parameters.
Definition: LoRaWAN.cpp:52
-
LoRaWANNode::sendReceive
int16_t sendReceive(const char *strUp, uint8_t fPort, uint8_t *dataDown, size_t *lenDown, bool isConfirmed=false, LoRaWANEvent_t *eventUp=NULL, LoRaWANEvent_t *eventDown=NULL)
Send a message to the server and wait for a downlink during Rx1 and/or Rx2 window.
Definition: LoRaWAN.cpp:1602
+
LoRaWANNode::sendReceive
int16_t sendReceive(const char *strUp, uint8_t fPort, uint8_t *dataDown, size_t *lenDown, bool isConfirmed=false, LoRaWANEvent_t *eventUp=NULL, LoRaWANEvent_t *eventDown=NULL)
Send a message to the server and wait for a downlink during Rx1 and/or Rx2 window.
Definition: LoRaWAN.cpp:1614
LoRaWANNode::beginOTAA
int16_t beginOTAA(uint64_t joinEUI, uint64_t devEUI, uint8_t *nwkKey, uint8_t *appKey, bool force=false, uint8_t joinDr=RADIOLIB_LW_DATA_RATE_UNUSED)
Join network by performing over-the-air activation. By this procedure, the device will perform an exc...
Definition: LoRaWAN.cpp:449
LoRaWANNode::getBufferSession
uint8_t * getBufferSession()
Returns the pointer to the internal buffer that holds the LW session parameters.
Definition: LoRaWAN.cpp:74
LoRaWANNode::wipe
void wipe()
Wipe internal persistent parameters. This will reset all counters and saved variables,...
Definition: LoRaWAN.cpp:47
-
LoRaWANNode::setTxPower
int16_t setTxPower(int8_t txPower)
Configure TX power of the radio module.
Definition: LoRaWAN.cpp:2029
-
LoRaWANNode::getMacDeviceTimeAns
int16_t getMacDeviceTimeAns(uint32_t *gpsEpoch, uint8_t *fraction, bool returnUnix=true)
Returns the network time after requesting a DeviceTime MAC command. Returns 'true' if a network respo...
Definition: LoRaWAN.cpp:2795
-
LoRaWANNode::getNFCntDown
uint32_t getNFCntDown()
Returns the last network downlink's frame counter; also 0 if no network downlink occured yet.
Definition: LoRaWAN.cpp:1634
-
LoRaWANNode::getDevAddr
uint64_t getDevAddr()
Returns the DevAddr of the device, regardless of OTAA or ABP mode.
Definition: LoRaWAN.cpp:2812
-
LoRaWANNode::downlink
int16_t downlink(uint8_t *data, size_t *len, LoRaWANEvent_t *event=NULL)
Wait for downlink from the server in either RX1 or RX2 window.
Definition: LoRaWAN.cpp:1269
+
LoRaWANNode::setTxPower
int16_t setTxPower(int8_t txPower)
Configure TX power of the radio module.
Definition: LoRaWAN.cpp:2041
+
LoRaWANNode::getMacDeviceTimeAns
int16_t getMacDeviceTimeAns(uint32_t *gpsEpoch, uint8_t *fraction, bool returnUnix=true)
Returns the network time after requesting a DeviceTime MAC command. Returns 'true' if a network respo...
Definition: LoRaWAN.cpp:2807
+
LoRaWANNode::getNFCntDown
uint32_t getNFCntDown()
Returns the last network downlink's frame counter; also 0 if no network downlink occured yet.
Definition: LoRaWAN.cpp:1646
+
LoRaWANNode::getDevAddr
uint64_t getDevAddr()
Returns the DevAddr of the device, regardless of OTAA or ABP mode.
Definition: LoRaWAN.cpp:2824
+
LoRaWANNode::downlink
int16_t downlink(uint8_t *data, size_t *len, LoRaWANEvent_t *event=NULL)
Wait for downlink from the server in either RX1 or RX2 window.
Definition: LoRaWAN.cpp:1281
LoRaWANNode::setBufferSession
int16_t setBufferSession(uint8_t *persistentBuffer)
Fill the internal buffer that holds the LW session parameters with a supplied buffer.
Definition: LoRaWAN.cpp:81
LoRaWANNode::LoRaWANNode
LoRaWANNode(PhysicalLayer *phy, const LoRaWANBand_t *band, uint8_t subBand=0)
Default constructor.
Definition: LoRaWAN.cpp:30
LoRaWANNode::rx1DrOffset
uint8_t rx1DrOffset
Offset between TX and RX1 (such that RX1 has equal or lower DR)
Definition: LoRaWAN.h:502
-
LoRaWANNode::getFCntUp
uint32_t getFCntUp()
Returns the last uplink's frame counter; also 0 if no uplink occured yet.
Definition: LoRaWAN.cpp:1627
-
LoRaWANNode::sendMacCommandReq
int16_t sendMacCommandReq(uint8_t cid)
Add a MAC command to the uplink queue. Only LinkCheck and DeviceTime are available to the user....
Definition: LoRaWAN.cpp:2093
-
LoRaWANNode::getMacLinkCheckAns
int16_t getMacLinkCheckAns(uint8_t *margin, uint8_t *gwCnt)
Returns the quality of connectivity after requesting a LinkCheck MAC command. Returns 'true' if a net...
Definition: LoRaWAN.cpp:2784
-
LoRaWANNode::setADR
void setADR(bool enable=true)
Toggle ADR to on or off.
Definition: LoRaWAN.cpp:1965
+
LoRaWANNode::getFCntUp
uint32_t getFCntUp()
Returns the last uplink's frame counter; also 0 if no uplink occured yet.
Definition: LoRaWAN.cpp:1639
+
LoRaWANNode::sendMacCommandReq
int16_t sendMacCommandReq(uint8_t cid)
Add a MAC command to the uplink queue. Only LinkCheck and DeviceTime are available to the user....
Definition: LoRaWAN.cpp:2105
+
LoRaWANNode::getMacLinkCheckAns
int16_t getMacLinkCheckAns(uint8_t *margin, uint8_t *gwCnt)
Returns the quality of connectivity after requesting a LinkCheck MAC command. Returns 'true' if a net...
Definition: LoRaWAN.cpp:2796
+
LoRaWANNode::setADR
void setADR(bool enable=true)
Toggle ADR to on or off.
Definition: LoRaWAN.cpp:1977
LoRaWANNode::rx2
LoRaWANChannel_t rx2
RX2 channel properties - may be changed by MAC command.
Definition: LoRaWAN.h:505
-
LoRaWANNode::resetFCntDown
void resetFCntDown()
Reset the downlink frame counters (application and network) This is unsafe and can possibly allow rep...
Definition: LoRaWAN.cpp:1642
+
LoRaWANNode::resetFCntDown
void resetFCntDown()
Reset the downlink frame counters (application and network) This is unsafe and can possibly allow rep...
Definition: LoRaWAN.cpp:1654
LoRaWANNode::isJoined
bool isJoined()
Whether there is an ongoing session active.
Definition: LoRaWAN.cpp:800
PhysicalLayer
Provides common interface for protocols that run on LoRa/FSK modules, such as RTTY or LoRaWAN....
Definition: PhysicalLayer.h:54
RadioLibTime_t
unsigned long RadioLibTime_t
Type used for durations in RadioLib.
Definition: TypeDef.h:586