Added support for Arduino Portenta H7 (TRAVIS_FORCE_BUILD)

.travis.yml

@@ -5,6 +5,7 @@ env:
     # see https://github.com/arduino/Arduino/blob/master/build/shared/manpage.adoc#options
     # and https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5-3rd-party-Hardware-specification#boardstxt
     - BOARD="arduino:avr:uno"
+    - BOARD="arduino-beta:mbed:envie_m4"
     - BOARD="arduino:avr:mega:cpu=atmega2560"
     - BOARD="arduino:avr:leonardo"
     - BOARD="esp8266:esp8266:generic:xtal=80,ResetMethod=ck,CrystalFreq=26,FlashFreq=40,FlashMode=qio,eesz=512K"
@@ -111,6 +112,11 @@ before_install:
       arduino --pref "boardsmanager.additional.urls=https://www.adafruit.com/package_adafruit_index.json" --save-prefs 2>&1;
       arduino --install-boards adafruit:samd;
 
+    elif [[ "$BOARD" =~ "arduino-beta:mbed:" ]]; then
+      export BUILD_EXAMPLES=false;
+      arduino --install-boards arduino-beta:mbed;
+      export SKIP_PAT='(HTTP|MQTT).*ino';
+
     fi
 
   # check if this release commit (or forced build) and if so, build for every board

README.md

@@ -46,7 +46,7 @@ SX127x, RFM9x, SX126x, RF69, SX1231, CC1101, nRF24L01, RFM2x, Si443x and SX128x
 ### Supported platforms:
 * __Arduino__  
   * [__AVR__](https://github.com/arduino/ArduinoCore-avr) - Arduino Uno, Mega, Leonardo, Pro Mini, Nano etc.
-  * [__mbed__](https://github.com/arduino/ArduinoCore-nRF528x-mbedos) - Arduino Nano 33 BLE
+  * [__mbed__](https://github.com/arduino/ArduinoCore-mbed) - Arduino Nano 33 BLE and Arduino Portenta H7
   * [__megaAVR__](https://github.com/arduino/ArduinoCore-megaavr) - Arduino Uno WiFi Rev.2 and Nano Every
   * [__SAM__](https://github.com/arduino/ArduinoCore-sam) - Arduino Due
   * [__SAMD__](https://github.com/arduino/ArduinoCore-samd) - Arduino Zero, MKR boards, M0 Pro etc.

src/BuildOpt.h

@@ -33,7 +33,7 @@
 
 #if defined(RADIOLIB_CUSTOM_PLATFORM)
   // name for your platform
-  #define RADIOLIB_PLATFORM                             "Custom"
+  #define RADIOLIB_PLATFORM                           "Custom"
 
   // the following parameters must always be defined
   #define RADIOLIB_PIN_TYPE                           uint8_t
@@ -51,6 +51,10 @@
   // the following must be defined if the Arduino core does not support tone function
   //#define RADIOLIB_TONE_UNSUPPORTED
 
+  // some of RadioLib drivers may be excluded, to prevent collisions with platform (or to speed up build process)
+  // for example, to exclude ESP8266 driver:
+  //RADIOLIB_EXCLUDE_ESP8266
+
 #else
   #if defined(__AVR__) && !(defined(ARDUINO_AVR_UNO_WIFI_REV2) || defined(ARDUINO_AVR_NANO_EVERY))
     // Arduino AVR boards (except for megaAVR) - Uno, Mega etc.
@@ -75,7 +79,7 @@
     #define RADIOLIB_DEFAULT_SPI                        SPI
 
     // RadioLib has ESP8266 driver, this must be disabled to use ESP8266 as platform
-    #define _RADIOLIB_ESP8266_H
+    #define RADIOLIB_EXCLUDE_ESP8266
 
   #elif defined(ESP32)
     // ESP32 boards
@@ -192,7 +196,23 @@
     #define RADIOLIB_HARDWARE_SERIAL_PORT               Serial1
 
     // Nano 33 BLE uses mbed libraries, which already contain ESP8266 driver
-    #define _RADIOLIB_ESP8266_H
+    #define RADIOLIB_EXCLUDE_ESP8266
+
+  #elif defined(ARDUINO_PORTENTA_H7_M7) || defined(ARDUINO_PORTENTA_H7_M4)
+    // Arduino Portenta H7
+    #define RADIOLIB_PLATFORM                           "Portenta H7"
+    #define RADIOLIB_PIN_TYPE                           pin_size_t
+    #define RADIOLIB_PIN_MODE                           PinMode
+    #define RADIOLIB_PIN_STATUS                         PinStatus
+    #define RADIOLIB_INTERRUPT_STATUS                   RADIOLIB_PIN_STATUS
+    #define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p)        digitalPinToInterrupt(p)
+    #define RADIOLIB_NC                                 (0xFF)
+    #define RADIOLIB_DEFAULT_SPI                        SPI
+    #define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED
+    #define RADIOLIB_HARDWARE_SERIAL_PORT               Serial1
+
+    // Arduino Portenta H7 uses mbed libraries, which already contain ESP8266 driver
+    #define RADIOLIB_EXCLUDE_ESP8266
 
   #elif defined(__STM32F4__) || defined(__STM32F1__)
     // Arduino STM32 core by Roger Clark (https://github.com/rogerclarkmelbourne/Arduino_STM32)