diff --git a/_s_x126x_8h_source.html b/_s_x126x_8h_source.html index 0e659178..7f024a9d 100644 --- a/_s_x126x_8h_source.html +++ b/_s_x126x_8h_source.html @@ -643,7 +643,7 @@ $(document).ready(function(){initNavTree('_s_x126x_8h_source.html',''); initResi
859 
868  int16_t setCRC(uint8_t len, uint16_t initial = 0x1D0F, uint16_t polynomial = 0x1021, bool inverted = true);
869 
-
877  int16_t setWhitening(bool enabled, uint16_t initial = 0x0100);
+
877  int16_t setWhitening(bool enabled, uint16_t initial = 0x01FF);
878 
888  int16_t setTCXO(float voltage, uint32_t delay = 5000);
889 
@@ -824,7 +824,6 @@ $(document).ready(function(){initNavTree('_s_x126x_8h_source.html',''); initResi
SX126x::setRxBandwidth
int16_t setRxBandwidth(float rxBw)
Sets FSK receiver bandwidth. Allowed values are 4.8, 5.8, 7.3, 9.7, 11.7, 14.6, 19....
Definition: SX126x.cpp:987
SX126x::setRegulatorDCDC
int16_t setRegulatorDCDC()
Set regulator mode to DC-DC.
Definition: SX126x.cpp:1451
SX126x::startReceiveDutyCycle
int16_t startReceiveDutyCycle(uint32_t rxPeriod, uint32_t sleepPeriod, uint16_t irqFlags=RADIOLIB_SX126X_IRQ_RX_DEFAULT, uint16_t irqMask=RADIOLIB_SX126X_IRQ_RX_DONE)
Interrupt-driven receive method where the device mostly sleeps and periodically wakes to listen....
Definition: SX126x.cpp:606
-
SX126x::setWhitening
int16_t setWhitening(bool enabled, uint16_t initial=0x0100)
Sets FSK whitening parameters.
Definition: SX126x.cpp:1279
SX126x::clearDio1Action
void clearDio1Action()
Clears interrupt service routine to call when DIO1 activates.
Definition: SX126x.cpp:490
SX126x::getTimeOnAir
uint32_t getTimeOnAir(size_t len) override
Get expected time-on-air for a given size of payload.
Definition: SX126x.cpp:1404
SX126x::standby
int16_t standby() override
Sets the module to standby mode (overload for PhysicalLayer compatibility, uses 13 MHz RC oscillator)...
Definition: SX126x.cpp:469
@@ -851,7 +850,7 @@ $(document).ready(function(){initNavTree('_s_x126x_8h_source.html',''); initResi
SX126x::SX126x
SX126x(Module *mod)
Default constructor.
Definition: SX126x.cpp:6
SX126x::receive
virtual int16_t receive(uint8_t *data, size_t len)
Binary receive method. Must be implemented in module class.
Definition: PhysicalLayer.cpp:112
SX126x::autoLDRO
int16_t autoLDRO()
Re-enables automatic LDRO configuration. Only available in LoRa mode. After calling this method,...
Definition: SX126x.cpp:1479
-
SX126x::setDirectAction
void setDirectAction(void(*func)(void))
Set interrupt service routine function to call when data bit is receveid in direct mode.
Definition: SX126x.cpp:1532
+
SX126x::setDirectAction
void setDirectAction(void(*func)(void))
Set interrupt service routine function to call when data bit is received in direct mode.
Definition: SX126x.cpp:1532
SX126x::fixedPacketLengthMode
int16_t fixedPacketLengthMode(uint8_t len=RADIOLIB_SX126X_MAX_PACKET_LENGTH)
Set modem in fixed packet length mode. Available in FSK mode only.
Definition: SX126x.cpp:1396
SX126x::setBroadcastAddress
int16_t setBroadcastAddress(uint8_t broadAddr)
Sets broadcast address. Calling this method will also enable address filtering for node and broadcast...
Definition: SX126x.cpp:1192
SX126x::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: SX126x.cpp:1383
@@ -866,6 +865,7 @@ $(document).ready(function(){initNavTree('_s_x126x_8h_source.html',''); initResi
SX126x::getSNR
float getSNR()
Gets SNR (Signal to Noise Ratio) of the last received packet. Only available for LoRa modem.
Definition: SX126x.cpp:1334
SX126x::setDio2AsRfSwitch
int16_t setDio2AsRfSwitch(bool enable=true)
Set DIO2 to function as RF switch (default in Semtech example designs).
Definition: SX126x.cpp:1681
SX126x::spectralScanGetResult
int16_t spectralScanGetResult(uint16_t *results)
Read the result of spectral scan.
Definition: SX126x.cpp:1616
+
SX126x::setWhitening
int16_t setWhitening(bool enabled, uint16_t initial=0x01FF)
Sets FSK whitening parameters.
Definition: SX126x.cpp:1279
SX126x::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf)
Sets LoRa spreading factor. Allowed values range from 5 to 12.
Definition: SX126x.cpp:841
SX126x::setDataRate
int16_t setDataRate(DataRate_t dr) override
Set data.
Definition: SX126x.cpp:958
SX126x::disableAddressFiltering
int16_t disableAddressFiltering()
Disables address filtering. Calling this method will also erase previously set addresses.
Definition: SX126x.cpp:1209
diff --git a/class_l_l_c_c68-members.html b/class_l_l_c_c68-members.html index 751b70f8..68a6baa4 100644 --- a/class_l_l_c_c68-members.html +++ b/class_l_l_c_c68-members.html @@ -168,7 +168,7 @@ $(document).ready(function(){initNavTree('class_l_l_c_c68.html',''); initResizab setSyncWord(uint8_t syncWord, uint8_t controlBits=0x44)SX126x setSyncWord(uint8_t *syncWord, size_t len) overrideSX126xvirtual setTCXO(float voltage, uint32_t delay=5000)SX126x - setWhitening(bool enabled, uint16_t initial=0x0100)SX126x + setWhitening(bool enabled, uint16_t initial=0x01FF)SX126x sleep(bool retainConfig=true)SX126x PhysicalLayer::sleep()PhysicalLayervirtual spectralScanAbort()SX126x diff --git a/class_l_l_c_c68.html b/class_l_l_c_c68.html index 00526e1d..40f760b3 100644 --- a/class_l_l_c_c68.html +++ b/class_l_l_c_c68.html @@ -300,9 +300,9 @@ void int16_t setCRC (uint8_t len, uint16_t initial=0x1D0F, uint16_t polynomial=0x1021, bool inverted=true)  Sets CRC configuration. More...
  -int16_t setWhitening (bool enabled, uint16_t initial=0x0100) - Sets FSK whitening parameters. More...
-  +int16_t setWhitening (bool enabled, uint16_t initial=0x01FF) + Sets FSK whitening parameters. More...
+  int16_t setTCXO (float voltage, uint32_t delay=5000)  Sets TCXO (Temperature Compensated Crystal Oscillator) configuration. More...
  @@ -367,7 +367,7 @@ void  Enable/disable inversion of the I and Q signals. More...
  void setDirectAction (void(*func)(void)) - Set interrupt service routine function to call when data bit is receveid in direct mode. More...
+ Set interrupt service routine function to call when data bit is received in direct mode. More...
  void readBit (uint32_t pin)  Function to read and process data bit in direct reception mode. More...
diff --git a/class_s_t_m32_w_lx-members.html b/class_s_t_m32_w_lx-members.html index f7819d0b..f0cd875e 100644 --- a/class_s_t_m32_w_lx-members.html +++ b/class_s_t_m32_w_lx-members.html @@ -174,7 +174,7 @@ $(document).ready(function(){initNavTree('class_s_t_m32_w_lx.html',''); initResi setSyncWord(uint8_t syncWord, uint8_t controlBits=0x44)SX126x setSyncWord(uint8_t *syncWord, size_t len) overrideSX126xvirtual setTCXO(float voltage, uint32_t delay=5000)SX126x - setWhitening(bool enabled, uint16_t initial=0x0100)SX126x + setWhitening(bool enabled, uint16_t initial=0x01FF)SX126x sleep(bool retainConfig=true)SX126x PhysicalLayer::sleep()PhysicalLayervirtual spectralScanAbort()SX126x diff --git a/class_s_t_m32_w_lx.html b/class_s_t_m32_w_lx.html index 6eabae8f..ded8f3f1 100644 --- a/class_s_t_m32_w_lx.html +++ b/class_s_t_m32_w_lx.html @@ -322,9 +322,9 @@ void int16_t setCRC (uint8_t len, uint16_t initial=0x1D0F, uint16_t polynomial=0x1021, bool inverted=true)  Sets CRC configuration. More...
  -int16_t setWhitening (bool enabled, uint16_t initial=0x0100) - Sets FSK whitening parameters. More...
-  +int16_t setWhitening (bool enabled, uint16_t initial=0x01FF) + Sets FSK whitening parameters. More...
+  int16_t setTCXO (float voltage, uint32_t delay=5000)  Sets TCXO (Temperature Compensated Crystal Oscillator) configuration. More...
  @@ -389,7 +389,7 @@ void  Enable/disable inversion of the I and Q signals. More...
  void setDirectAction (void(*func)(void)) - Set interrupt service routine function to call when data bit is receveid in direct mode. More...
+ Set interrupt service routine function to call when data bit is received in direct mode. More...
  void readBit (uint32_t pin)  Function to read and process data bit in direct reception mode. More...
diff --git a/class_s_x1261-members.html b/class_s_x1261-members.html index c845adb7..93a750f7 100644 --- a/class_s_x1261-members.html +++ b/class_s_x1261-members.html @@ -167,7 +167,7 @@ $(document).ready(function(){initNavTree('class_s_x1261.html',''); initResizable setSyncWord(uint8_t syncWord, uint8_t controlBits=0x44)SX126x setSyncWord(uint8_t *syncWord, size_t len) overrideSX126xvirtual setTCXO(float voltage, uint32_t delay=5000)SX126x - setWhitening(bool enabled, uint16_t initial=0x0100)SX126x + setWhitening(bool enabled, uint16_t initial=0x01FF)SX126x sleep(bool retainConfig=true)SX126x PhysicalLayer::sleep()PhysicalLayervirtual spectralScanAbort()SX126x diff --git a/class_s_x1261.html b/class_s_x1261.html index 13dcf133..2d912177 100644 --- a/class_s_x1261.html +++ b/class_s_x1261.html @@ -291,9 +291,9 @@ void int16_t setCRC (uint8_t len, uint16_t initial=0x1D0F, uint16_t polynomial=0x1021, bool inverted=true)  Sets CRC configuration. More...
  -int16_t setWhitening (bool enabled, uint16_t initial=0x0100) - Sets FSK whitening parameters. More...
-  +int16_t setWhitening (bool enabled, uint16_t initial=0x01FF) + Sets FSK whitening parameters. More...
+  int16_t setTCXO (float voltage, uint32_t delay=5000)  Sets TCXO (Temperature Compensated Crystal Oscillator) configuration. More...
  @@ -358,7 +358,7 @@ void  Enable/disable inversion of the I and Q signals. More...
  void setDirectAction (void(*func)(void)) - Set interrupt service routine function to call when data bit is receveid in direct mode. More...
+ Set interrupt service routine function to call when data bit is received in direct mode. More...
  void readBit (uint32_t pin)  Function to read and process data bit in direct reception mode. More...
diff --git a/class_s_x1262-members.html b/class_s_x1262-members.html index b04d43e2..87687ee6 100644 --- a/class_s_x1262-members.html +++ b/class_s_x1262-members.html @@ -167,7 +167,7 @@ $(document).ready(function(){initNavTree('class_s_x1262.html',''); initResizable setSyncWord(uint8_t syncWord, uint8_t controlBits=0x44)SX126x setSyncWord(uint8_t *syncWord, size_t len) overrideSX126xvirtual setTCXO(float voltage, uint32_t delay=5000)SX126x - setWhitening(bool enabled, uint16_t initial=0x0100)SX126x + setWhitening(bool enabled, uint16_t initial=0x01FF)SX126x sleep(bool retainConfig=true)SX126x PhysicalLayer::sleep()PhysicalLayervirtual spectralScanAbort()SX126x diff --git a/class_s_x1262.html b/class_s_x1262.html index 9d6db8fb..23fb1c47 100644 --- a/class_s_x1262.html +++ b/class_s_x1262.html @@ -289,9 +289,9 @@ void int16_t setCRC (uint8_t len, uint16_t initial=0x1D0F, uint16_t polynomial=0x1021, bool inverted=true)  Sets CRC configuration. More...
  -int16_t setWhitening (bool enabled, uint16_t initial=0x0100) - Sets FSK whitening parameters. More...
-  +int16_t setWhitening (bool enabled, uint16_t initial=0x01FF) + Sets FSK whitening parameters. More...
+  int16_t setTCXO (float voltage, uint32_t delay=5000)  Sets TCXO (Temperature Compensated Crystal Oscillator) configuration. More...
  @@ -356,7 +356,7 @@ void  Enable/disable inversion of the I and Q signals. More...
  void setDirectAction (void(*func)(void)) - Set interrupt service routine function to call when data bit is receveid in direct mode. More...
+ Set interrupt service routine function to call when data bit is received in direct mode. More...
  void readBit (uint32_t pin)  Function to read and process data bit in direct reception mode. More...
diff --git a/class_s_x1268-members.html b/class_s_x1268-members.html index 80297ff9..295f0f1b 100644 --- a/class_s_x1268-members.html +++ b/class_s_x1268-members.html @@ -167,7 +167,7 @@ $(document).ready(function(){initNavTree('class_s_x1268.html',''); initResizable setSyncWord(uint8_t syncWord, uint8_t controlBits=0x44)SX126x setSyncWord(uint8_t *syncWord, size_t len) overrideSX126xvirtual setTCXO(float voltage, uint32_t delay=5000)SX126x - setWhitening(bool enabled, uint16_t initial=0x0100)SX126x + setWhitening(bool enabled, uint16_t initial=0x01FF)SX126x sleep(bool retainConfig=true)SX126x PhysicalLayer::sleep()PhysicalLayervirtual spectralScanAbort()SX126x diff --git a/class_s_x1268.html b/class_s_x1268.html index 8096d4bb..0eac2ad8 100644 --- a/class_s_x1268.html +++ b/class_s_x1268.html @@ -286,9 +286,9 @@ void int16_t setCRC (uint8_t len, uint16_t initial=0x1D0F, uint16_t polynomial=0x1021, bool inverted=true)  Sets CRC configuration. More...
  -int16_t setWhitening (bool enabled, uint16_t initial=0x0100) - Sets FSK whitening parameters. More...
-  +int16_t setWhitening (bool enabled, uint16_t initial=0x01FF) + Sets FSK whitening parameters. More...
+  int16_t setTCXO (float voltage, uint32_t delay=5000)  Sets TCXO (Temperature Compensated Crystal Oscillator) configuration. More...
  @@ -353,7 +353,7 @@ void  Enable/disable inversion of the I and Q signals. More...
  void setDirectAction (void(*func)(void)) - Set interrupt service routine function to call when data bit is receveid in direct mode. More...
+ Set interrupt service routine function to call when data bit is received in direct mode. More...
  void readBit (uint32_t pin)  Function to read and process data bit in direct reception mode. More...
diff --git a/class_s_x126x-members.html b/class_s_x126x-members.html index a385507a..bbe7b1df 100644 --- a/class_s_x126x-members.html +++ b/class_s_x126x-members.html @@ -164,7 +164,7 @@ $(document).ready(function(){initNavTree('class_s_x126x.html',''); initResizable setSyncWord(uint8_t syncWord, uint8_t controlBits=0x44)SX126x setSyncWord(uint8_t *syncWord, size_t len) overrideSX126xvirtual setTCXO(float voltage, uint32_t delay=5000)SX126x - setWhitening(bool enabled, uint16_t initial=0x0100)SX126x + setWhitening(bool enabled, uint16_t initial=0x01FF)SX126x sleep(bool retainConfig=true)SX126x PhysicalLayer::sleep()PhysicalLayervirtual spectralScanAbort()SX126x diff --git a/class_s_x126x.html b/class_s_x126x.html index 934985f5..2b8a9ad5 100644 --- a/class_s_x126x.html +++ b/class_s_x126x.html @@ -272,9 +272,9 @@ void int16_t setCRC (uint8_t len, uint16_t initial=0x1D0F, uint16_t polynomial=0x1021, bool inverted=true)  Sets CRC configuration. More...
  -int16_t setWhitening (bool enabled, uint16_t initial=0x0100) - Sets FSK whitening parameters. More...
-  +int16_t setWhitening (bool enabled, uint16_t initial=0x01FF) + Sets FSK whitening parameters. More...
+  int16_t setTCXO (float voltage, uint32_t delay=5000)  Sets TCXO (Temperature Compensated Crystal Oscillator) configuration. More...
  @@ -339,7 +339,7 @@ void  Enable/disable inversion of the I and Q signals. More...
  void setDirectAction (void(*func)(void)) - Set interrupt service routine function to call when data bit is receveid in direct mode. More...
+ Set interrupt service routine function to call when data bit is received in direct mode. More...
  void readBit (uint32_t pin)  Function to read and process data bit in direct reception mode. More...
@@ -1763,7 +1763,7 @@ bool  -

Set interrupt service routine function to call when data bit is receveid in direct mode.

+

Set interrupt service routine function to call when data bit is received in direct mode.

Parameters
@@ -2382,8 +2382,8 @@ bool  - + @@ -2412,7 +2412,7 @@ bool 
funcPointer to interrupt service routine.
-

◆ setWhitening()

+ +

◆ setWhitening()

@@ -2398,7 +2398,7 @@ bool 
 uint16_t initial = 0x0100 initial = 0x01FF 
Parameters
- +
enabledTrue = Whitening enabled
initialInitial value used for the whitening LFSR in FSK mode. Defaults to 0x0100, use 0x01FF for SX127x compatibility.
initialInitial value used for the whitening LFSR in FSK mode. By default set to 0x01FF for compatibility with SX127x and LoRaWAN.
diff --git a/class_s_x126x.js b/class_s_x126x.js index ccbe4010..c3a6f3fc 100644 --- a/class_s_x126x.js +++ b/class_s_x126x.js @@ -64,7 +64,7 @@ var class_s_x126x = [ "setSyncWord", "class_s_x126x.html#a827a4754ea53388513d263e5d9171395", null ], [ "setSyncWord", "class_s_x126x.html#a9d92dce566f8aefa836fe8f332e9560f", null ], [ "setTCXO", "class_s_x126x.html#a57bee6f4b3a3b7ec646ac8de347ee0d6", null ], - [ "setWhitening", "class_s_x126x.html#a67702de41ae866b9f9d73234fc9ae376", null ], + [ "setWhitening", "class_s_x126x.html#ae500bad45638a47264b7e5955a93107d", null ], [ "sleep", "class_s_x126x.html#afb5509f0705cdd971065251ed6b2fb4e", null ], [ "spectralScanAbort", "class_s_x126x.html#a865397e1cca38bec2d055c047825ea07", null ], [ "spectralScanGetResult", "class_s_x126x.html#ae473773e5bed4b08452e80311bdb26f2", null ], diff --git a/functions_func_s.html b/functions_func_s.html index e6786f9c..665b19e0 100644 --- a/functions_func_s.html +++ b/functions_func_s.html @@ -495,7 +495,7 @@ $(document).ready(function(){initNavTree('functions_func_s.html',''); initResiza : nRF24
  • setWhitening() -: SX126x +: SX126x , SX128x
  • Si4430() diff --git a/functions_s.html b/functions_s.html index a68157ca..0d3078ea 100644 --- a/functions_s.html +++ b/functions_s.html @@ -501,7 +501,7 @@ $(document).ready(function(){initNavTree('functions_s.html',''); initResizable() : nRF24
  • setWhitening() -: SX126x +: SX126x , SX128x
  • Si4430() diff --git a/navtreeindex2.js b/navtreeindex2.js index 7e28c28b..77f069a3 100644 --- a/navtreeindex2.js +++ b/navtreeindex2.js @@ -97,7 +97,6 @@ var NAVTREEINDEX2 = "class_s_x126x.html#a59d443c02d4620cda32c63a00c6bcc22":[3,0,53,57], "class_s_x126x.html#a5ae69309ca0cf5f13c60f2d162916ff8":[3,0,53,53], "class_s_x126x.html#a5b4f8a41b593436b8c7a2a2d46ac387e":[3,0,53,76], -"class_s_x126x.html#a67702de41ae866b9f9d73234fc9ae376":[3,0,53,64], "class_s_x126x.html#a6848afe4c16a47edb3e0b342a86ecdfd":[3,0,53,5], "class_s_x126x.html#a691c960e3fabfb9edcfccbae6eab5b76":[3,0,53,22], "class_s_x126x.html#a7a1579e2557c36a4a34b09039c0d0c71":[3,0,53,70], @@ -145,6 +144,7 @@ var NAVTREEINDEX2 = "class_s_x126x.html#ae3db6b29c482d94eef8a43cd8b5751c0":[3,0,53,30], "class_s_x126x.html#ae46e08d579f4acbad029b4cd4f4fffaf":[3,0,53,45], "class_s_x126x.html#ae473773e5bed4b08452e80311bdb26f2":[3,0,53,67], +"class_s_x126x.html#ae500bad45638a47264b7e5955a93107d":[3,0,53,64], "class_s_x126x.html#ae5993359ace652fbdc862eb23fdd263d":[3,0,53,59], "class_s_x126x.html#af30a581d31feae6f50c0591d1ee113f1":[3,0,53,42], "class_s_x126x.html#afabefb1b214411198f3537e8afce898f":[3,0,53,20], diff --git a/search/all_10.js b/search/all_10.js index b66eb139..836b6875 100644 --- a/search/all_10.js +++ b/search/all_10.js @@ -83,7 +83,7 @@ var searchData= ['setsyncword_384',['setSyncWord',['../class_s_x127x.html#ac5c7f4584352a12390594395d9c29bde',1,'SX127x::setSyncWord()'],['../class_physical_layer.html#a6c71cdc1238e1368274670758431a977',1,'PhysicalLayer::setSyncWord()'],['../class_s_x128x.html#a1bef6b6f3058be6b1681c78334342bc1',1,'SX128x::setSyncWord(uint8_t syncWord, uint8_t controlBits=0x44)'],['../class_s_x128x.html#a0efa595867624a54153d693d16f9f731',1,'SX128x::setSyncWord(uint8_t *syncWord, uint8_t len)'],['../class_s_x127x.html#aaf400f33e17c1679c0b55cd70bef90b0',1,'SX127x::setSyncWord()'],['../class_s_x126x.html#a827a4754ea53388513d263e5d9171395',1,'SX126x::setSyncWord(uint8_t *syncWord, size_t len) override'],['../class_s_x126x.html#a9d92dce566f8aefa836fe8f332e9560f',1,'SX126x::setSyncWord(uint8_t syncWord, uint8_t controlBits=0x44)'],['../class_si443x.html#a4ed0da298c2418db4a88a19ef8938e0a',1,'Si443x::setSyncWord()'],['../class_r_f69.html#a26667d50ec845c28e17236c69c886561',1,'RF69::setSyncWord()'],['../class_c_c1101.html#ab89b0932dbacadc34d049a2bd2292001',1,'CC1101::setSyncWord(uint8_t *syncWord, uint8_t len, uint8_t maxErrBits=0, bool requireCarrierSense=false)'],['../class_c_c1101.html#a433f1a40b33be6c84d3665a1b4cd57d6',1,'CC1101::setSyncWord(uint8_t syncH, uint8_t syncL, uint8_t maxErrBits=0, bool requireCarrierSense=false)']]], ['settcxo_385',['setTCXO',['../class_s_x126x.html#a57bee6f4b3a3b7ec646ac8de347ee0d6',1,'SX126x']]], ['settransmitpipe_386',['setTransmitPipe',['../classn_r_f24.html#aa0e1f2dddf810213410a420205bbd8af',1,'nRF24']]], - ['setwhitening_387',['setWhitening',['../class_s_x126x.html#a67702de41ae866b9f9d73234fc9ae376',1,'SX126x::setWhitening()'],['../class_s_x128x.html#a8b3eea268f21bf911b6eaf37c5eb0b5f',1,'SX128x::setWhitening()']]], + ['setwhitening_387',['setWhitening',['../class_s_x126x.html#ae500bad45638a47264b7e5955a93107d',1,'SX126x::setWhitening()'],['../class_s_x128x.html#a8b3eea268f21bf911b6eaf37c5eb0b5f',1,'SX128x::setWhitening()']]], ['si4430_388',['Si4430',['../class_si4430.html#ac5ac1122e863a92b374a71e8880e16d9',1,'Si4430::Si4430()'],['../class_si4430.html',1,'Si4430']]], ['si4431_389',['Si4431',['../class_si4431.html#a332bfd2a32dea9ac0700bf172fe5b2d0',1,'Si4431::Si4431()'],['../class_si4431.html',1,'Si4431']]], ['si4432_390',['Si4432',['../class_si4432.html#afb1f1ae46d04788aa42f6276efd231ac',1,'Si4432::Si4432()'],['../class_si4432.html',1,'Si4432']]], diff --git a/search/functions_f.js b/search/functions_f.js index 197cdd3f..38c6f3c7 100644 --- a/search/functions_f.js +++ b/search/functions_f.js @@ -81,7 +81,7 @@ var searchData= ['setsyncword_761',['setSyncWord',['../class_s_x128x.html#a1bef6b6f3058be6b1681c78334342bc1',1,'SX128x::setSyncWord()'],['../class_physical_layer.html#a6c71cdc1238e1368274670758431a977',1,'PhysicalLayer::setSyncWord()'],['../class_s_x128x.html#a0efa595867624a54153d693d16f9f731',1,'SX128x::setSyncWord()'],['../class_s_x127x.html#aaf400f33e17c1679c0b55cd70bef90b0',1,'SX127x::setSyncWord(uint8_t *syncWord, size_t len) override'],['../class_s_x127x.html#ac5c7f4584352a12390594395d9c29bde',1,'SX127x::setSyncWord(uint8_t syncWord)'],['../class_s_x126x.html#a9d92dce566f8aefa836fe8f332e9560f',1,'SX126x::setSyncWord()'],['../class_si443x.html#a4ed0da298c2418db4a88a19ef8938e0a',1,'Si443x::setSyncWord()'],['../class_r_f69.html#a26667d50ec845c28e17236c69c886561',1,'RF69::setSyncWord()'],['../class_c_c1101.html#a433f1a40b33be6c84d3665a1b4cd57d6',1,'CC1101::setSyncWord(uint8_t syncH, uint8_t syncL, uint8_t maxErrBits=0, bool requireCarrierSense=false)'],['../class_c_c1101.html#ab89b0932dbacadc34d049a2bd2292001',1,'CC1101::setSyncWord(uint8_t *syncWord, uint8_t len, uint8_t maxErrBits=0, bool requireCarrierSense=false)'],['../class_s_x126x.html#a827a4754ea53388513d263e5d9171395',1,'SX126x::setSyncWord(uint8_t *syncWord, size_t len) override']]], ['settcxo_762',['setTCXO',['../class_s_x126x.html#a57bee6f4b3a3b7ec646ac8de347ee0d6',1,'SX126x']]], ['settransmitpipe_763',['setTransmitPipe',['../classn_r_f24.html#aa0e1f2dddf810213410a420205bbd8af',1,'nRF24']]], - ['setwhitening_764',['setWhitening',['../class_s_x128x.html#a8b3eea268f21bf911b6eaf37c5eb0b5f',1,'SX128x::setWhitening()'],['../class_s_x126x.html#a67702de41ae866b9f9d73234fc9ae376',1,'SX126x::setWhitening()']]], + ['setwhitening_764',['setWhitening',['../class_s_x128x.html#a8b3eea268f21bf911b6eaf37c5eb0b5f',1,'SX128x::setWhitening()'],['../class_s_x126x.html#ae500bad45638a47264b7e5955a93107d',1,'SX126x::setWhitening()']]], ['si4430_765',['Si4430',['../class_si4430.html#ac5ac1122e863a92b374a71e8880e16d9',1,'Si4430']]], ['si4431_766',['Si4431',['../class_si4431.html#a332bfd2a32dea9ac0700bf172fe5b2d0',1,'Si4431']]], ['si4432_767',['Si4432',['../class_si4432.html#afb1f1ae46d04788aa42f6276efd231ac',1,'Si4432']]],