diff --git a/examples/SX127x/SX127x_Channel_Activity_Detection_Blocking/SX127x_Channel_Activity_Detection_Blocking.ino b/examples/SX127x/SX127x_Channel_Activity_Detection_Blocking/SX127x_Channel_Activity_Detection_Blocking.ino
index 6a23001a..ebd3ed32 100644
--- a/examples/SX127x/SX127x_Channel_Activity_Detection_Blocking/SX127x_Channel_Activity_Detection_Blocking.ino
+++ b/examples/SX127x/SX127x_Channel_Activity_Detection_Blocking/SX127x_Channel_Activity_Detection_Blocking.ino
@@ -46,7 +46,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 }
 
diff --git a/examples/SX127x/SX127x_Channel_Activity_Detection_Interrupt/SX127x_Channel_Activity_Detection_Interrupt.ino b/examples/SX127x/SX127x_Channel_Activity_Detection_Interrupt/SX127x_Channel_Activity_Detection_Interrupt.ino
index 631ae909..edb01aa4 100644
--- a/examples/SX127x/SX127x_Channel_Activity_Detection_Interrupt/SX127x_Channel_Activity_Detection_Interrupt.ino
+++ b/examples/SX127x/SX127x_Channel_Activity_Detection_Interrupt/SX127x_Channel_Activity_Detection_Interrupt.ino
@@ -42,7 +42,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set the function that will be called
diff --git a/examples/SX127x/SX127x_Channel_Activity_Detection_Receive/SX127x_Channel_Activity_Detection_Receive.ino b/examples/SX127x/SX127x_Channel_Activity_Detection_Receive/SX127x_Channel_Activity_Detection_Receive.ino
index 945ded9f..35f9d40d 100644
--- a/examples/SX127x/SX127x_Channel_Activity_Detection_Receive/SX127x_Channel_Activity_Detection_Receive.ino
+++ b/examples/SX127x/SX127x_Channel_Activity_Detection_Receive/SX127x_Channel_Activity_Detection_Receive.ino
@@ -47,7 +47,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set the function that will be called
diff --git a/examples/SX127x/SX127x_FSK_Modem/SX127x_FSK_Modem.ino b/examples/SX127x/SX127x_FSK_Modem/SX127x_FSK_Modem.ino
index aa2b2127..49617884 100644
--- a/examples/SX127x/SX127x_FSK_Modem/SX127x_FSK_Modem.ino
+++ b/examples/SX127x/SX127x_FSK_Modem/SX127x_FSK_Modem.ino
@@ -41,7 +41,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // if needed, you can switch between LoRa and FSK modes
@@ -64,7 +64,7 @@ void setup() {
   if (state != RADIOLIB_ERR_NONE) {
     Serial.print(F("Unable to set configuration, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // FSK modulation can be changed to OOK
@@ -77,7 +77,7 @@ void setup() {
   if (state != RADIOLIB_ERR_NONE) {
     Serial.print(F("Unable to change modulation, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   #warning "This sketch is just an API guide! Read the note at line 6."
diff --git a/examples/SX127x/SX127x_PingPong/SX127x_PingPong.ino b/examples/SX127x/SX127x_PingPong/SX127x_PingPong.ino
index df025bc9..0e191f20 100644
--- a/examples/SX127x/SX127x_PingPong/SX127x_PingPong.ino
+++ b/examples/SX127x/SX127x_PingPong/SX127x_PingPong.ino
@@ -58,7 +58,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set the function that will be called
@@ -79,7 +79,7 @@ void setup() {
     } else {
       Serial.print(F("failed, code "));
       Serial.println(state);
-      while (true);
+      while (true) { delay(10); }
     }
   #endif
 }
diff --git a/examples/SX127x/SX127x_Receive_Blocking/SX127x_Receive_Blocking.ino b/examples/SX127x/SX127x_Receive_Blocking/SX127x_Receive_Blocking.ino
index bdfae6d5..b2a1e302 100644
--- a/examples/SX127x/SX127x_Receive_Blocking/SX127x_Receive_Blocking.ino
+++ b/examples/SX127x/SX127x_Receive_Blocking/SX127x_Receive_Blocking.ino
@@ -50,7 +50,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 }
 
diff --git a/examples/SX127x/SX127x_Receive_Direct/SX127x_Receive_Direct.ino b/examples/SX127x/SX127x_Receive_Direct/SX127x_Receive_Direct.ino
index dee4214f..d622a2a2 100644
--- a/examples/SX127x/SX127x_Receive_Direct/SX127x_Receive_Direct.ino
+++ b/examples/SX127x/SX127x_Receive_Direct/SX127x_Receive_Direct.ino
@@ -39,7 +39,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set the direct mode sync word
diff --git a/examples/SX127x/SX127x_Receive_FHSS/SX127x_Receive_FHSS.ino b/examples/SX127x/SX127x_Receive_FHSS/SX127x_Receive_FHSS.ino
index d3423b9e..7785a173 100644
--- a/examples/SX127x/SX127x_Receive_FHSS/SX127x_Receive_FHSS.ino
+++ b/examples/SX127x/SX127x_Receive_FHSS/SX127x_Receive_FHSS.ino
@@ -81,7 +81,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set hop period in symbols
@@ -92,7 +92,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set the function to call when reception is finished
@@ -109,7 +109,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 }
 
diff --git a/examples/SX127x/SX127x_Receive_Interrupt/SX127x_Receive_Interrupt.ino b/examples/SX127x/SX127x_Receive_Interrupt/SX127x_Receive_Interrupt.ino
index 0e833e0d..5d2adbff 100644
--- a/examples/SX127x/SX127x_Receive_Interrupt/SX127x_Receive_Interrupt.ino
+++ b/examples/SX127x/SX127x_Receive_Interrupt/SX127x_Receive_Interrupt.ino
@@ -46,7 +46,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set the function that will be called
@@ -61,7 +61,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // if needed, 'listen' mode can be disabled by calling
diff --git a/examples/SX127x/SX127x_Settings/SX127x_Settings.ino b/examples/SX127x/SX127x_Settings/SX127x_Settings.ino
index 007a49fb..6fbc631b 100644
--- a/examples/SX127x/SX127x_Settings/SX127x_Settings.ino
+++ b/examples/SX127x/SX127x_Settings/SX127x_Settings.ino
@@ -52,7 +52,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // initialize the second LoRa instance with
@@ -78,7 +78,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // you can also change the settings at runtime
@@ -87,32 +87,32 @@ void setup() {
   // set carrier frequency to 433.5 MHz
   if (radio1.setFrequency(433.5) == RADIOLIB_ERR_INVALID_FREQUENCY) {
     Serial.println(F("Selected frequency is invalid for this module!"));
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set bandwidth to 250 kHz
   if (radio1.setBandwidth(250.0) == RADIOLIB_ERR_INVALID_BANDWIDTH) {
     Serial.println(F("Selected bandwidth is invalid for this module!"));
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set spreading factor to 10
   if (radio1.setSpreadingFactor(10) == RADIOLIB_ERR_INVALID_SPREADING_FACTOR) {
     Serial.println(F("Selected spreading factor is invalid for this module!"));
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set coding rate to 6
   if (radio1.setCodingRate(6) == RADIOLIB_ERR_INVALID_CODING_RATE) {
     Serial.println(F("Selected coding rate is invalid for this module!"));
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set LoRa sync word to 0x14
   // NOTE: value 0x34 is reserved for LoRaWAN networks and should not be used
   if (radio1.setSyncWord(0x14) != RADIOLIB_ERR_NONE) {
     Serial.println(F("Unable to set sync word!"));
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set output power to 10 dBm (accepted range is -3 - 17 dBm)
@@ -120,20 +120,20 @@ void setup() {
   //       duty cycle MUST NOT exceed 1%
   if (radio1.setOutputPower(10) == RADIOLIB_ERR_INVALID_OUTPUT_POWER) {
     Serial.println(F("Selected output power is invalid for this module!"));
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set over current protection limit to 80 mA (accepted range is 45 - 240 mA)
   // NOTE: set value to 0 to disable overcurrent protection
   if (radio1.setCurrentLimit(80) == RADIOLIB_ERR_INVALID_CURRENT_LIMIT) {
     Serial.println(F("Selected current limit is invalid for this module!"));
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set LoRa preamble length to 15 symbols (accepted range is 6 - 65535)
   if (radio1.setPreambleLength(15) == RADIOLIB_ERR_INVALID_PREAMBLE_LENGTH) {
     Serial.println(F("Selected preamble length is invalid for this module!"));
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set amplifier gain to 1 (accepted range is 1 - 6, where 1 is maximum gain)
@@ -141,7 +141,7 @@ void setup() {
   //       leave at 0 unless you know what you're doing
   if (radio1.setGain(1) == RADIOLIB_ERR_INVALID_GAIN) {
     Serial.println(F("Selected gain is invalid for this module!"));
-    while (true);
+    while (true) { delay(10); }
   }
 
   Serial.println(F("All settings successfully changed!"));
diff --git a/examples/SX127x/SX127x_Transmit_Blocking/SX127x_Transmit_Blocking.ino b/examples/SX127x/SX127x_Transmit_Blocking/SX127x_Transmit_Blocking.ino
index 2298ac2c..e5b258e3 100644
--- a/examples/SX127x/SX127x_Transmit_Blocking/SX127x_Transmit_Blocking.ino
+++ b/examples/SX127x/SX127x_Transmit_Blocking/SX127x_Transmit_Blocking.ino
@@ -45,7 +45,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // some modules have an external RF switch
diff --git a/examples/SX127x/SX127x_Transmit_FHSS/SX127x_Transmit_FHSS.ino b/examples/SX127x/SX127x_Transmit_FHSS/SX127x_Transmit_FHSS.ino
index 15ef3ae8..5c2297db 100644
--- a/examples/SX127x/SX127x_Transmit_FHSS/SX127x_Transmit_FHSS.ino
+++ b/examples/SX127x/SX127x_Transmit_FHSS/SX127x_Transmit_FHSS.ino
@@ -93,7 +93,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set hop period in symbols
@@ -104,7 +104,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set the function to call when transmission is finished
diff --git a/examples/SX127x/SX127x_Transmit_Interrupt/SX127x_Transmit_Interrupt.ino b/examples/SX127x/SX127x_Transmit_Interrupt/SX127x_Transmit_Interrupt.ino
index 7cdce593..7b78080e 100644
--- a/examples/SX127x/SX127x_Transmit_Interrupt/SX127x_Transmit_Interrupt.ino
+++ b/examples/SX127x/SX127x_Transmit_Interrupt/SX127x_Transmit_Interrupt.ino
@@ -45,7 +45,7 @@ void setup() {
   } else {
     Serial.print(F("failed, code "));
     Serial.println(state);
-    while (true);
+    while (true) { delay(10); }
   }
 
   // set the function that will be called