diff --git a/_lo_ra_w_a_n_8h_source.html b/_lo_ra_w_a_n_8h_source.html
index f0a3a09b..c3847236 100644
--- a/_lo_ra_w_a_n_8h_source.html
+++ b/_lo_ra_w_a_n_8h_source.html
@@ -445,524 +445,521 @@ $(document).ready(function(){initNavTree('_lo_ra_w_a_n_8h_source.html',''); init
-
-
-
+
+
+
-
+
-
-
- 420 uint8_t rx1DrTable[RADIOLIB_LORAWAN_CHANNEL_NUM_DATARATES][8];
+ 417 uint8_t rx1DrTable[RADIOLIB_LORAWAN_CHANNEL_NUM_DATARATES][8];
+
+
-
+
-
-
-
-
- 432 uint8_t
dataRates[RADIOLIB_LORAWAN_CHANNEL_NUM_DATARATES];
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+
+
+ 429 uint8_t
dataRates[RADIOLIB_LORAWAN_CHANNEL_NUM_DATARATES];
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ 465 #define RADIOLIB_LORAWAN_NUM_SUPPORTED_BANDS (BandLast - BandEU868)
-
- 468 #define RADIOLIB_LORAWAN_NUM_SUPPORTED_BANDS (BandLast - BandEU868)
+
+
-
-
-
-
-
+
+
+
+
-
-
-
-
-
-
-
+
+
+
+
+
+
+
-
-
-
+
+
+
-
-
-
+
+
+
-
+
-
+
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- 579 int16_t
beginOTAA(uint64_t joinEUI, uint64_t devEUI,
const uint8_t* nwkKey,
const uint8_t* appKey);
-
- 591 int16_t
beginABP(uint32_t addr,
const uint8_t* fNwkSIntKey,
const uint8_t* sNwkSIntKey,
const uint8_t* nwkSEncKey,
const uint8_t* appSKey);
-
-
-
- 607 virtual int16_t
activateABP(uint8_t initialDr = RADIOLIB_LORAWAN_DATA_RATE_UNUSED);
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ 576 int16_t
beginOTAA(uint64_t joinEUI, uint64_t devEUI,
const uint8_t* nwkKey,
const uint8_t* appKey);
+
+ 588 int16_t
beginABP(uint32_t addr,
const uint8_t* fNwkSIntKey,
const uint8_t* sNwkSIntKey,
const uint8_t* nwkSEncKey,
const uint8_t* appSKey);
+
+
+
+ 604 virtual int16_t
activateABP(uint8_t initialDr = RADIOLIB_LORAWAN_DATA_RATE_UNUSED);
+
+
-
-
- 612 #if defined(RADIOLIB_BUILD_ARDUINO)
-
-
-
-
-
-
-
-
-
- 684 virtual int16_t
sendReceive(
const uint8_t* dataUp,
size_t lenUp, uint8_t fPort, uint8_t* dataDown,
size_t* lenDown,
bool isConfirmed =
false,
LoRaWANEvent_t* eventUp = NULL,
LoRaWANEvent_t* eventDown = NULL);
-
-
-
-
-
- 714 int16_t
getMacDeviceTimeAns(uint32_t* gpsEpoch, uint8_t* fraction,
bool returnUnix =
true);
-
-
-
-
-
-
-
- 742 void setADR(
bool enable =
true);
-
-
-
-
-
- 767 void setCSMA(
bool csmaEnabled, uint8_t maxChanges = 4, uint8_t backoffMax = 0, uint8_t difsSlots = 2);
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+ 609 #if defined(RADIOLIB_BUILD_ARDUINO)
+
+
+
+
+
+
+
+
+
+ 681 virtual int16_t
sendReceive(
const uint8_t* dataUp,
size_t lenUp, uint8_t fPort, uint8_t* dataDown,
size_t* lenDown,
bool isConfirmed =
false,
LoRaWANEvent_t* eventUp = NULL,
LoRaWANEvent_t* eventDown = NULL);
+
+
+
+
+
+ 711 int16_t
getMacDeviceTimeAns(uint32_t* gpsEpoch, uint8_t* fraction,
bool returnUnix =
true);
+
+
+
+
+
+
+
+ 739 void setADR(
bool enable =
true);
+
+
+
+
+
+ 764 void setCSMA(
bool csmaEnabled, uint8_t maxChanges = 4, uint8_t backoffMax = 0, uint8_t difsSlots = 2);
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
-
-
-
-
-
-
-
-
- 860 #if !RADIOLIB_GODMODE
-
-
-
-
+
+
+
+
+
+
+ 857 #if !RADIOLIB_GODMODE
+
+
+
+
+
+
+ 864 uint8_t bufferNonces[RADIOLIB_LORAWAN_NONCES_BUF_SIZE] = { 0 };
-
- 867 uint8_t bufferNonces[RADIOLIB_LORAWAN_NONCES_BUF_SIZE] = { 0 };
+
+ 867 uint8_t bufferSession[RADIOLIB_LORAWAN_SESSION_BUF_SIZE] = { 0 };
-
- 870 uint8_t bufferSession[RADIOLIB_LORAWAN_SESSION_BUF_SIZE] = { 0 };
-
- 872 uint8_t fOptsUp[RADIOLIB_LORAWAN_FHDR_FOPTS_MAX_LEN] = { 0 };
- 873 uint8_t fOptsDown[RADIOLIB_LORAWAN_FHDR_FOPTS_MAX_LEN] = { 0 };
- 874 uint8_t fOptsUpLen = 0;
- 875 uint8_t fOptsDownLen = 0;
-
- 877 uint16_t lwMode = RADIOLIB_LORAWAN_MODE_NONE;
- 878 uint8_t lwClass = RADIOLIB_LORAWAN_CLASS_A;
- 879 bool isActive =
false;
-
- 881 uint64_t joinEUI = 0;
-
- 883 uint8_t nwkKey[RADIOLIB_AES128_KEY_SIZE] = { 0 };
- 884 uint8_t appKey[RADIOLIB_AES128_KEY_SIZE] = { 0 };
-
-
-
- 888 uint32_t devAddr = 0;
- 889 uint8_t appSKey[RADIOLIB_AES128_KEY_SIZE] = { 0 };
- 890 uint8_t fNwkSIntKey[RADIOLIB_AES128_KEY_SIZE] = { 0 };
- 891 uint8_t sNwkSIntKey[RADIOLIB_AES128_KEY_SIZE] = { 0 };
- 892 uint8_t nwkSEncKey[RADIOLIB_AES128_KEY_SIZE] = { 0 };
- 893 uint8_t jSIntKey[RADIOLIB_AES128_KEY_SIZE] = { 0 };
-
- 895 uint16_t keyCheckSum = 0;
-
-
- 898 uint16_t devNonce = 0;
- 899 uint32_t joinNonce = 0;
-
-
- 902 uint32_t homeNetId = 0;
- 903 uint8_t adrLimitExp = RADIOLIB_LORAWAN_ADR_ACK_LIMIT_EXP;
- 904 uint8_t adrDelayExp = RADIOLIB_LORAWAN_ADR_ACK_DELAY_EXP;
-
- 906 uint8_t txPowerSteps = 0;
- 907 uint8_t txPowerMax = 0;
-
- 909 uint32_t aFCntDown = 0;
- 910 uint32_t nFCntDown = 0;
- 911 uint32_t confFCntUp = RADIOLIB_LORAWAN_FCNT_NONE;
- 912 uint32_t confFCntDown = RADIOLIB_LORAWAN_FCNT_NONE;
- 913 uint32_t adrFCnt = 0;
+ 869 uint8_t fOptsUp[RADIOLIB_LORAWAN_FHDR_FOPTS_MAX_LEN] = { 0 };
+ 870 uint8_t fOptsDown[RADIOLIB_LORAWAN_FHDR_FOPTS_MAX_LEN] = { 0 };
+ 871 uint8_t fOptsUpLen = 0;
+ 872 uint8_t fOptsDownLen = 0;
+
+ 874 uint16_t lwMode = RADIOLIB_LORAWAN_MODE_NONE;
+ 875 uint8_t lwClass = RADIOLIB_LORAWAN_CLASS_A;
+ 876 bool isActive =
false;
+
+ 878 uint64_t joinEUI = 0;
+
+ 880 uint8_t nwkKey[RADIOLIB_AES128_KEY_SIZE] = { 0 };
+ 881 uint8_t appKey[RADIOLIB_AES128_KEY_SIZE] = { 0 };
+
+
+
+ 885 uint32_t devAddr = 0;
+ 886 uint8_t appSKey[RADIOLIB_AES128_KEY_SIZE] = { 0 };
+ 887 uint8_t fNwkSIntKey[RADIOLIB_AES128_KEY_SIZE] = { 0 };
+ 888 uint8_t sNwkSIntKey[RADIOLIB_AES128_KEY_SIZE] = { 0 };
+ 889 uint8_t nwkSEncKey[RADIOLIB_AES128_KEY_SIZE] = { 0 };
+ 890 uint8_t jSIntKey[RADIOLIB_AES128_KEY_SIZE] = { 0 };
+
+ 892 uint16_t keyCheckSum = 0;
+
+
+ 895 uint16_t devNonce = 0;
+ 896 uint32_t joinNonce = 0;
+
+
+ 899 uint32_t homeNetId = 0;
+ 900 uint8_t adrLimitExp = RADIOLIB_LORAWAN_ADR_ACK_LIMIT_EXP;
+ 901 uint8_t adrDelayExp = RADIOLIB_LORAWAN_ADR_ACK_DELAY_EXP;
+
+ 903 uint8_t txPowerSteps = 0;
+ 904 uint8_t txPowerMax = 0;
+
+ 906 uint32_t aFCntDown = 0;
+ 907 uint32_t nFCntDown = 0;
+ 908 uint32_t confFCntUp = RADIOLIB_LORAWAN_FCNT_NONE;
+ 909 uint32_t confFCntDown = RADIOLIB_LORAWAN_FCNT_NONE;
+ 910 uint32_t adrFCnt = 0;
+
+
+ 913 bool adrEnabled =
true;
-
- 916 bool adrEnabled =
true;
-
-
- 919 bool dutyCycleEnabled =
false;
- 920 uint32_t dutyCycle = 0;
-
-
- 923 bool dwellTimeEnabledUp =
false;
- 924 uint16_t dwellTimeUp = 0;
- 925 bool dwellTimeEnabledDn =
false;
- 926 uint16_t dwellTimeDn = 0;
+
+ 916 bool dutyCycleEnabled =
false;
+ 917 uint32_t dutyCycle = 0;
+
+
+ 920 bool dwellTimeEnabledUp =
false;
+ 921 uint16_t dwellTimeUp = 0;
+ 922 bool dwellTimeEnabledDn =
false;
+ 923 uint16_t dwellTimeDn = 0;
+
+
+
-
-
+
+ 929 bool csmaEnabled =
false;
-
- 932 bool csmaEnabled =
false;
+
+ 932 uint8_t maxChanges = RADIOLIB_LORAWAN_MAX_CHANGES_DEFAULT;
-
- 935 uint8_t maxChanges = RADIOLIB_LORAWAN_MAX_CHANGES_DEFAULT;
-
-
-
-
- 940 uint8_t backoffMax = RADIOLIB_LORAWAN_BACKOFF_MAX_DEFAULT;
-
-
- 943 uint8_t difsSlots = RADIOLIB_LORAWAN_DIFS_DEFAULT;
+
+
+
+ 937 uint8_t backoffMax = RADIOLIB_LORAWAN_BACKOFF_MAX_DEFAULT;
+
+
+ 940 uint8_t difsSlots = RADIOLIB_LORAWAN_DIFS_DEFAULT;
+
+
+
-
-
-
-
- 949 LoRaWANChannel_t channels[3] = { RADIOLIB_LORAWAN_CHANNEL_NONE, RADIOLIB_LORAWAN_CHANNEL_NONE,
- 950 RADIOLIB_LORAWAN_CHANNEL_NONE };
-
-
-
- 954 RadioLibTime_t rxDelays[3] = { 0, RADIOLIB_LORAWAN_RECEIVE_DELAY_1_MS, RADIOLIB_LORAWAN_RECEIVE_DELAY_2_MS };
+
+ 946 LoRaWANChannel_t channels[3] = { RADIOLIB_LORAWAN_CHANNEL_NONE, RADIOLIB_LORAWAN_CHANNEL_NONE,
+ 947 RADIOLIB_LORAWAN_CHANNEL_NONE };
+
+
+
+ 951 RadioLibTime_t rxDelays[3] = { 0, RADIOLIB_LORAWAN_RECEIVE_DELAY_1_MS, RADIOLIB_LORAWAN_RECEIVE_DELAY_2_MS };
+
+
+ 954 uint8_t rx1DrOffset = 0;
-
- 957 uint8_t rx1DrOffset = 0;
+
+
-
-
+
+
-
-
+
+
-
-
+
+
-
-
+
+ 969 uint8_t battLevel = 0xFF;
-
- 972 uint8_t battLevel = 0xFF;
+
+ 972 bool isMACPayload =
false;
-
- 975 bool isMACPayload =
false;
+
+
-
-
+
+
-
-
+
+
-
-
+
+ 984 void createSession(uint16_t lwMode, uint8_t initialDr);
-
- 987 void createSession(uint16_t lwMode, uint8_t initialDr);
+
+ 987 void composeJoinRequest(uint8_t* joinRequestMsg);
-
- 990 void composeJoinRequest(uint8_t* joinRequestMsg);
+
+
-
-
+
+ 993 void processCFList(uint8_t* cfList);
-
- 996 void processCFList(uint8_t* cfList);
-
-
- 999 int16_t isValidUplink(uint8_t* len, uint8_t fPort);
-
-
-
+
+ 996 int16_t isValidUplink(uint8_t* len, uint8_t fPort);
+
+
+
+
+
+ 1002 void composeUplink(
const uint8_t* in, uint8_t lenIn, uint8_t* out, uint8_t fPort,
bool isConfirmed);
-
- 1005 void composeUplink(
const uint8_t* in, uint8_t lenIn, uint8_t* out, uint8_t fPort,
bool isConfirmed);
+
+ 1005 void micUplink(uint8_t* inOut, uint8_t lenInOut);
-
- 1008 void micUplink(uint8_t* inOut, uint8_t lenInOut);
+
+ 1008 int16_t transmitUplink(
LoRaWANChannel_t* chnl, uint8_t* in, uint8_t len,
bool retrans);
-
- 1011 int16_t transmitUplink(
LoRaWANChannel_t* chnl, uint8_t* in, uint8_t len,
bool retrans);
+
+
-
-
+
+ 1014 int16_t parseDownlink(uint8_t* data,
size_t* len,
LoRaWANEvent_t* event = NULL);
-
- 1017 int16_t parseDownlink(uint8_t* data,
size_t* len,
LoRaWANEvent_t* event = NULL);
-
-
- 1020 bool execMacCommand(uint8_t cid, uint8_t* optIn, uint8_t lenIn);
- 1021 bool execMacCommand(uint8_t cid, uint8_t* optIn, uint8_t lenIn, uint8_t* optOut);
+
+ 1017 bool execMacCommand(uint8_t cid, uint8_t* optIn, uint8_t lenIn);
+ 1018 bool execMacCommand(uint8_t cid, uint8_t* optIn, uint8_t lenIn, uint8_t* optOut);
+
+
+ 1021 virtual bool derivedMacHandler(uint8_t cid, uint8_t* optIn, uint8_t lenIn, uint8_t* optOut);
-
- 1024 virtual bool derivedMacHandler(uint8_t cid, uint8_t* optIn, uint8_t lenIn, uint8_t* optOut);
+
+ 1024 void preprocessMacLinkAdr(uint8_t* mPtr, uint8_t cLen, uint8_t* mAdrOpt);
-
- 1027 void preprocessMacLinkAdr(uint8_t* mPtr, uint8_t cLen, uint8_t* mAdrOpt);
+
+ 1027 void postprocessMacLinkAdr(uint8_t* ack, uint8_t cLen);
-
- 1030 void postprocessMacLinkAdr(uint8_t* ack, uint8_t cLen);
+
+
-
-
+
+
-
-
-
-
-
- 1040 int16_t getMacLen(uint8_t cid, uint8_t* len, uint8_t dir,
bool inclusive =
false);
-
-
-
-
- 1045 bool isPersistentMacCommand(uint8_t cid, uint8_t dir);
+
+
+ 1037 int16_t getMacLen(uint8_t cid, uint8_t* len, uint8_t dir,
bool inclusive =
false);
+
+
+
+
+ 1042 bool isPersistentMacCommand(uint8_t cid, uint8_t dir);
+
+
+ 1045 int16_t pushMacCommand(uint8_t cid, uint8_t* cOcts, uint8_t* out, uint8_t* lenOut, uint8_t dir);
-
- 1048 int16_t pushMacCommand(uint8_t cid, uint8_t* cOcts, uint8_t* out, uint8_t* lenOut, uint8_t dir);
+
+ 1048 int16_t getMacPayload(uint8_t cid, uint8_t* in, uint8_t lenIn, uint8_t* out, uint8_t dir);
-
- 1051 int16_t getMacPayload(uint8_t cid, uint8_t* in, uint8_t lenIn, uint8_t* out, uint8_t dir);
+
+ 1051 int16_t deleteMacCommand(uint8_t cid, uint8_t* inOut, uint8_t* lenInOut, uint8_t dir);
-
- 1054 int16_t deleteMacCommand(uint8_t cid, uint8_t* inOut, uint8_t* lenInOut, uint8_t dir);
+
+ 1054 void clearMacCommands(uint8_t* inOut, uint8_t* lenInOut, uint8_t dir);
-
- 1057 void clearMacCommands(uint8_t* inOut, uint8_t* lenInOut, uint8_t dir);
+
+ 1057 int16_t setPhyProperties(
const LoRaWANChannel_t* chnl, uint8_t dir, int8_t pwr,
size_t pre = 0);
-
- 1060 int16_t setPhyProperties(
const LoRaWANChannel_t* chnl, uint8_t dir, int8_t pwr,
size_t pre = 0);
+
+ 1060 bool csmaChannelClear(uint8_t difs, uint8_t numBackoff);
-
- 1063 bool csmaChannelClear(uint8_t difs, uint8_t numBackoff);
+
+ 1063 bool cadChannelClear();
-
- 1066 bool cadChannelClear();
+
+ 1066 void getChannelPlanMask(uint64_t* chMaskGrp0123, uint32_t* chMaskGrp45);
-
- 1069 void getChannelPlanMask(uint64_t* chMaskGrp0123, uint32_t* chMaskGrp45);
-
-
-
-
- 1074 void selectChannelPlanDyn(
bool joinRequest =
false);
-
-
-
- 1078 void selectChannelPlanFix();
-
-
-
- 1082 uint8_t getAvailableChannels(uint16_t* mask);
+
+
+
+ 1071 void selectChannelPlanDyn(
bool joinRequest =
false);
+
+
+
+ 1075 void selectChannelPlanFix();
+
+
+
+ 1079 uint8_t getAvailableChannels(uint16_t* mask);
+
+
+ 1082 void setAvailableChannels(uint16_t mask);
-
- 1085 void setAvailableChannels(uint16_t mask);
+
+ 1085 int16_t selectChannels();
-
- 1088 int16_t selectChannels();
+
+ 1088 bool applyChannelMask(uint64_t chMaskGrp0123, uint32_t chMaskGrp45);
-
- 1091 bool applyChannelMask(uint64_t chMaskGrp0123, uint32_t chMaskGrp45);
-
- 1093 #if RADIOLIB_DEBUG_PROTOCOL
-
- 1095 void printChannels();
-
+ 1090 #if RADIOLIB_DEBUG_PROTOCOL
+
+ 1092 void printChannels();
+
+
+
+ 1096 uint32_t generateMIC(uint8_t* msg,
size_t len, uint8_t* key);
-
- 1099 uint32_t generateMIC(uint8_t* msg,
size_t len, uint8_t* key);
-
-
-
- 1103 bool verifyMIC(uint8_t* msg,
size_t len, uint8_t* key);
+
+
+ 1100 bool verifyMIC(uint8_t* msg,
size_t len, uint8_t* key);
+
+
+ 1103 int16_t findDataRate(uint8_t dr,
DataRate_t* dataRate);
-
- 1106 int16_t findDataRate(uint8_t dr,
DataRate_t* dataRate);
+
+ 1106 void processAES(
const uint8_t* in,
size_t len, uint8_t* key, uint8_t* out, uint32_t fCnt, uint8_t dir, uint8_t ctrId,
bool counter);
-
- 1109 void processAES(
const uint8_t* in,
size_t len, uint8_t* key, uint8_t* out, uint32_t fCnt, uint8_t dir, uint8_t ctrId,
bool counter);
+
+ 1109 static uint16_t checkSum16(
const uint8_t *key, uint16_t keyLen);
-
- 1112 static uint16_t checkSum16(
const uint8_t *key, uint16_t keyLen);
+
+ 1112 static int16_t checkBufferCommon(
const uint8_t *buffer, uint16_t size);
-
- 1115 static int16_t checkBufferCommon(
const uint8_t *buffer, uint16_t size);
-
-
- 1118 template<
typename T>
- 1119 static T ntoh(
const uint8_t* buff,
size_t size = 0);
-
-
- 1122 template<
typename T>
- 1123 static void hton(uint8_t* buff, T val,
size_t size = 0);
-
-
- 1126 template<
typename T>
- 1127 T LoRaWANNode::ntoh(
const uint8_t* buff,
size_t size) {
- 1128 const uint8_t* buffPtr = buff;
- 1129 size_t targetSize =
sizeof(T);
-
-
-
-
- 1134 for(
size_t i = 0; i < targetSize; i++) {
- 1135 res |= (uint32_t)(*(buffPtr++)) << 8*i;
-
-
-
-
- 1140 template<
typename T>
- 1141 void LoRaWANNode::hton(uint8_t* buff, T val,
size_t size) {
- 1142 uint8_t* buffPtr = buff;
- 1143 size_t targetSize =
sizeof(T);
-
-
+
+ 1115 template<
typename T>
+ 1116 static T ntoh(
const uint8_t* buff,
size_t size = 0);
+
+
+ 1119 template<
typename T>
+ 1120 static void hton(uint8_t* buff, T val,
size_t size = 0);
+
+
+ 1123 template<
typename T>
+ 1124 T LoRaWANNode::ntoh(
const uint8_t* buff,
size_t size) {
+ 1125 const uint8_t* buffPtr = buff;
+ 1126 size_t targetSize =
sizeof(T);
+
+
+
+
+ 1131 for(
size_t i = 0; i < targetSize; i++) {
+ 1132 res |= (uint32_t)(*(buffPtr++)) << 8*i;
+
+
+
+
+ 1137 template<
typename T>
+ 1138 void LoRaWANNode::hton(uint8_t* buff, T val,
size_t size) {
+ 1139 uint8_t* buffPtr = buff;
+ 1140 size_t targetSize =
sizeof(T);
+
+
+
+ 1144 for(
size_t i = 0; i < targetSize; i++) {
+ 1145 *(buffPtr++) = val >> 8*i;
- 1147 for(
size_t i = 0; i < targetSize; i++) {
- 1148 *(buffPtr++) = val >> 8*i;
-
-
-
-
-LoRaWAN-compatible node (class A device).
Definition: LoRaWAN.h:529
LoRaWAN-compatible node (class A device).
Definition: LoRaWAN.h:526
void clearSession()
Clear an active session, so that the device will have to rejoin the network.
Definition: LoRaWAN.cpp:280
virtual int16_t sendReceive(const char *strUp, uint8_t fPort, bool isConfirmed=false, LoRaWANEvent_t *eventUp=NULL, LoRaWANEvent_t *eventDown=NULL)
Send a message to the server and wait for a downlink during Rx1 and/or Rx2 window.
Definition: LoRaWAN.cpp:45
int16_t setDatarate(uint8_t drUp)
Set uplink datarate. This should not be used when ADR is enabled.
Definition: LoRaWAN.cpp:2599
void scheduleTransmission(RadioLibTime_t tUplink)
Set the exact time a transmission should occur. Note: this is the internal clock time....
Definition: LoRaWAN.cpp:2730
RadioLibTime_t scanGuard
Rx window padding in milliseconds according to the spec, the Rx window must be at least enough time t...
Definition: LoRaWAN.h:858
void setCSMA(bool csmaEnabled, uint8_t maxChanges=4, uint8_t backoffMax=0, uint8_t difsSlots=2)
Configures CSMA for LoRaWAN as per TR013, LoRa Alliance.
Definition: LoRaWAN.cpp:2712
void setDutyCycle(bool enable=true, RadioLibTime_t msPerHour=0)
Toggle adherence to dutyCycle limits to on or off.
Definition: LoRaWAN.cpp:2689
int16_t beginABP(uint32_t addr, const uint8_t *fNwkSIntKey, const uint8_t *sNwkSIntKey, const uint8_t *nwkSEncKey, const uint8_t *appSKey)
Set the device credentials and activation configuration.
Definition: LoRaWAN.cpp:620
RadioLibTime_t timeUntilUplink()
Returns time in milliseconds until next uplink is available under dutyCycle limits.
Definition: LoRaWAN.cpp:3247
void setDeviceStatus(uint8_t battLevel)
Set device status.
Definition: LoRaWAN.cpp:2726
RadioLibTime_t dutyCycleInterval(RadioLibTime_t msPerHour, RadioLibTime_t airtime)
Calculate the minimum interval to adhere to a certain dutyCycle. This interval is based on the ToA of...
Definition: LoRaWAN.cpp:3237
void setDwellTime(bool enable, RadioLibTime_t msPerUplink=0)
Toggle adherence to dwellTime limits to on or off.
Definition: LoRaWAN.cpp:2701
uint32_t getAFCntDown()
Returns the last application downlink's frame counter; also 0 if no application downlink occured yet.
Definition: LoRaWAN.cpp:2746
RadioLibTime_t getLastToA()
Get the Time-on-air of the last uplink message (in milliseconds).
Definition: LoRaWAN.cpp:2759
virtual int16_t activateABP(uint8_t initialDr=RADIOLIB_LORAWAN_DATA_RATE_UNUSED)
Join network by restoring ABP session or performing over-the-air activation. In this procedure,...
Definition: LoRaWAN.cpp:966
bool TS009
TS009 Protocol Specification Verification switch (allows FPort 224 and cuts off uplink payload instea...
Definition: LoRaWAN.h:844
int16_t setDatarate(uint8_t drUp)
Set uplink datarate. This should not be used when ADR is enabled.
Definition: LoRaWAN.cpp:2593
void scheduleTransmission(RadioLibTime_t tUplink)
Set the exact time a transmission should occur. Note: this is the internal clock time....
Definition: LoRaWAN.cpp:2724
RadioLibTime_t scanGuard
Rx window padding in milliseconds according to the spec, the Rx window must be at least enough time t...
Definition: LoRaWAN.h:855
void setCSMA(bool csmaEnabled, uint8_t maxChanges=4, uint8_t backoffMax=0, uint8_t difsSlots=2)
Configures CSMA for LoRaWAN as per TR013, LoRa Alliance.
Definition: LoRaWAN.cpp:2706
void setDutyCycle(bool enable=true, RadioLibTime_t msPerHour=0)
Toggle adherence to dutyCycle limits to on or off.
Definition: LoRaWAN.cpp:2683
int16_t beginABP(uint32_t addr, const uint8_t *fNwkSIntKey, const uint8_t *sNwkSIntKey, const uint8_t *nwkSEncKey, const uint8_t *appSKey)
Set the device credentials and activation configuration.
Definition: LoRaWAN.cpp:614
RadioLibTime_t timeUntilUplink()
Returns time in milliseconds until next uplink is available under dutyCycle limits.
Definition: LoRaWAN.cpp:3232
void setDeviceStatus(uint8_t battLevel)
Set device status.
Definition: LoRaWAN.cpp:2720
RadioLibTime_t dutyCycleInterval(RadioLibTime_t msPerHour, RadioLibTime_t airtime)
Calculate the minimum interval to adhere to a certain dutyCycle. This interval is based on the ToA of...
Definition: LoRaWAN.cpp:3222
void setDwellTime(bool enable, RadioLibTime_t msPerUplink=0)
Toggle adherence to dwellTime limits to on or off.
Definition: LoRaWAN.cpp:2695
uint32_t getAFCntDown()
Returns the last application downlink's frame counter; also 0 if no application downlink occured yet.
Definition: LoRaWAN.cpp:2740
RadioLibTime_t getLastToA()
Get the Time-on-air of the last uplink message (in milliseconds).
Definition: LoRaWAN.cpp:2753
virtual int16_t activateABP(uint8_t initialDr=RADIOLIB_LORAWAN_DATA_RATE_UNUSED)
Join network by restoring ABP session or performing over-the-air activation. In this procedure,...
Definition: LoRaWAN.cpp:960
bool TS009
TS009 Protocol Specification Verification switch (allows FPort 224 and cuts off uplink payload instea...
Definition: LoRaWAN.h:841
uint8_t * getBufferNonces()
Returns the pointer to the internal buffer that holds the LW base parameters.
Definition: LoRaWAN.cpp:229
uint8_t * getBufferSession()
Returns the pointer to the internal buffer that holds the LW session parameters.
Definition: LoRaWAN.cpp:435
bool isActivated()
Whether there is an ongoing session active.
Definition: LoRaWAN.cpp:1057
int16_t setTxPower(int8_t txPower)
Configure TX power of the radio module.
Definition: LoRaWAN.cpp:2632
int16_t getMacDeviceTimeAns(uint32_t *gpsEpoch, uint8_t *fraction, bool returnUnix=true)
Returns the network time after requesting a DeviceTime MAC command. Returns 'true' if a network respo...
Definition: LoRaWAN.cpp:2450
uint32_t getNFCntDown()
Returns the last network downlink's frame counter; also 0 if no network downlink occured yet.
Definition: LoRaWAN.cpp:2742
uint8_t * getBufferSession()
Returns the pointer to the internal buffer that holds the LW session parameters.
Definition: LoRaWAN.cpp:429
bool isActivated()
Whether there is an ongoing session active.
Definition: LoRaWAN.cpp:1051
int16_t setTxPower(int8_t txPower)
Configure TX power of the radio module.
Definition: LoRaWAN.cpp:2626
int16_t getMacDeviceTimeAns(uint32_t *gpsEpoch, uint8_t *fraction, bool returnUnix=true)
Returns the network time after requesting a DeviceTime MAC command. Returns 'true' if a network respo...
Definition: LoRaWAN.cpp:2444
uint32_t getNFCntDown()
Returns the last network downlink's frame counter; also 0 if no network downlink occured yet.
Definition: LoRaWAN.cpp:2736
LoRaWANNode(PhysicalLayer *phy, const LoRaWANBand_t *band, uint8_t subBand=0)
Default constructor.
Definition: LoRaWAN.cpp:9
int16_t beginOTAA(uint64_t joinEUI, uint64_t devEUI, const uint8_t *nwkKey, const uint8_t *appKey)
Set the device credentials and activation configuration.
Definition: LoRaWAN.cpp:591
uint8_t getMaxPayloadLen()
Returns the maximum allowed uplink payload size given the current MAC state. Most importantly,...
Definition: LoRaWAN.cpp:3256
virtual int16_t activateOTAA(uint8_t initialDr=RADIOLIB_LORAWAN_DATA_RATE_UNUSED, LoRaWANJoinEvent_t *joinEvent=NULL)
Join network by restoring OTAA session or performing over-the-air activation. By this procedure,...
Definition: LoRaWAN.cpp:876
uint32_t getFCntUp()
Returns the last uplink's frame counter; also 0 if no uplink occured yet.
Definition: LoRaWAN.cpp:2735
int16_t beginOTAA(uint64_t joinEUI, uint64_t devEUI, const uint8_t *nwkKey, const uint8_t *appKey)
Set the device credentials and activation configuration.
Definition: LoRaWAN.cpp:585
uint8_t getMaxPayloadLen()
Returns the maximum allowed uplink payload size given the current MAC state. Most importantly,...
Definition: LoRaWAN.cpp:3241
virtual int16_t activateOTAA(uint8_t initialDr=RADIOLIB_LORAWAN_DATA_RATE_UNUSED, LoRaWANJoinEvent_t *joinEvent=NULL)
Join network by restoring OTAA session or performing over-the-air activation. By this procedure,...
Definition: LoRaWAN.cpp:870
uint32_t getFCntUp()
Returns the last uplink's frame counter; also 0 if no uplink occured yet.
Definition: LoRaWAN.cpp:2729
int16_t setBufferNonces(const uint8_t *persistentBuffer)
Fill the internal buffer that holds the LW base parameters with a supplied buffer.
Definition: LoRaWAN.cpp:244
int16_t setRx2Dr(uint8_t dr)
Configure the Rx2 datarate for ABP mode. This should not be needed for LoRaWAN 1.1 as it is configure...
Definition: LoRaWAN.cpp:2658
int16_t sendMacCommandReq(uint8_t cid)
Add a MAC command to the uplink queue. Only LinkCheck and DeviceTime are available to the user....
Definition: LoRaWAN.cpp:2415
int16_t getMacLinkCheckAns(uint8_t *margin, uint8_t *gwCnt)
Returns the quality of connectivity after requesting a LinkCheck MAC command. Returns 'true' if a net...
Definition: LoRaWAN.cpp:2439
void setADR(bool enable=true)
Toggle ADR to on or off.
Definition: LoRaWAN.cpp:2685
int16_t setBufferSession(const uint8_t *persistentBuffer)
Fill the internal buffer that holds the LW session parameters with a supplied buffer.
Definition: LoRaWAN.cpp:467
uint32_t getDevAddr()
Returns the DevAddr of the device, regardless of OTAA or ABP mode.
Definition: LoRaWAN.cpp:2755
void resetFCntDown()
Reset the downlink frame counters (application and network) This is unsafe and can possibly allow rep...
Definition: LoRaWAN.cpp:2750
int16_t setRx2Dr(uint8_t dr)
Configure the Rx2 datarate for ABP mode. This should not be needed for LoRaWAN 1.1 as it is configure...
Definition: LoRaWAN.cpp:2652
int16_t sendMacCommandReq(uint8_t cid)
Add a MAC command to the uplink queue. Only LinkCheck and DeviceTime are available to the user....
Definition: LoRaWAN.cpp:2409
int16_t getMacLinkCheckAns(uint8_t *margin, uint8_t *gwCnt)
Returns the quality of connectivity after requesting a LinkCheck MAC command. Returns 'true' if a net...
Definition: LoRaWAN.cpp:2433
void setADR(bool enable=true)
Toggle ADR to on or off.
Definition: LoRaWAN.cpp:2679
int16_t setBufferSession(const uint8_t *persistentBuffer)
Fill the internal buffer that holds the LW session parameters with a supplied buffer.
Definition: LoRaWAN.cpp:461
uint32_t getDevAddr()
Returns the DevAddr of the device, regardless of OTAA or ABP mode.
Definition: LoRaWAN.cpp:2749
void resetFCntDown()
Reset the downlink frame counters (application and network) This is unsafe and can possibly allow rep...
Definition: LoRaWAN.cpp:2744
Provides common interface for protocols that run on LoRa/FSK modules, such as RTTY or LoRaWAN....
Definition: PhysicalLayer.h:151
unsigned long RadioLibTime_t
Type used for durations in RadioLib.
Definition: TypeDef.h:642
Structure to save information about LoRaWAN band.
Definition: LoRaWAN.h:371
int8_t powerMax
Maximum allowed output power in this band in dBm.
Definition: LoRaWAN.h:388
bool txParamSupported
Whether this band implements the MAC command TxParamSetupReq.
Definition: LoRaWAN.h:403
LoRaWANChannel_t txAck[2]
Relay channels for ACK downlink.
Definition: LoRaWAN.h:429
LoRaWANChannel_t txAck[2]
Relay channels for ACK downlink.
Definition: LoRaWAN.h:426
RadioLibTime_t dutyCycle
Number of milliseconds per hour of allowed Time-on-Air.
Definition: LoRaWAN.h:394
uint8_t dataRates[RADIOLIB_LORAWAN_CHANNEL_NUM_DATARATES]
The corresponding datarates, bandwidths and coding rates for DR index.
Definition: LoRaWAN.h:432
uint8_t dataRates[RADIOLIB_LORAWAN_CHANNEL_NUM_DATARATES]
The corresponding datarates, bandwidths and coding rates for DR index.
Definition: LoRaWAN.h:429
RadioLibTime_t dwellTimeUp
Maximum dwell time per uplink message in milliseconds.
Definition: LoRaWAN.h:397
LoRaWANChannel_t txWoR[2]
Relay channels for WoR uplink.
Definition: LoRaWAN.h:426
LoRaWANChannel_t txWoR[2]
Relay channels for WoR uplink.
Definition: LoRaWAN.h:423
uint32_t freqMin
Minimum allowed frequency (coded in 100 Hz steps)
Definition: LoRaWAN.h:379
uint8_t payloadLenMax[RADIOLIB_LORAWAN_CHANNEL_NUM_DATARATES]
Array of allowed maximum application payload lengths for each data rate (N-value)
Definition: LoRaWAN.h:385
LoRaWANChannel_t txFreqs[3]
A set of default uplink (TX) channels for dynamic bands.
Definition: LoRaWAN.h:406
LoRaWANChannel_t txJoinReq[3]
A set of possible extra channels for the Join-Request message for dynamic bands.
Definition: LoRaWAN.h:409
int8_t powerNumSteps
Number of power steps in this band.
Definition: LoRaWAN.h:391
LoRaWANChannelSpan_t txSpans[2]
Default uplink (TX) channel spans for fixed bands, including Join-Request parameters.
Definition: LoRaWAN.h:415
LoRaWANChannelSpan_t txSpans[2]
Default uplink (TX) channel spans for fixed bands, including Join-Request parameters.
Definition: LoRaWAN.h:412
uint8_t bandNum
Identier for this band.
Definition: LoRaWAN.h:373
uint32_t freqMax
Maximum allowed frequency (coded in 100 Hz steps)
Definition: LoRaWAN.h:382
uint8_t bandType
Whether the channels are fixed per specification, or dynamically allocated through the network (plus ...
Definition: LoRaWAN.h:376
LoRaWANChannel_t rx2
Backup channel for downlink (RX2) window.
Definition: LoRaWAN.h:423
uint8_t numTxSpans
The number of TX channel spans for fixed bands.
Definition: LoRaWAN.h:412
LoRaWANChannel_t rx2
Backup channel for downlink (RX2) window.
Definition: LoRaWAN.h:420
uint8_t numTxSpans
The number of TX channel spans for fixed bands.
Definition: LoRaWAN.h:409
RadioLibTime_t dwellTimeDn
Maximum dwell time per downlink message in milliseconds.
Definition: LoRaWAN.h:400
LoRaWANChannelSpan_t rx1Span
Default downlink (RX1) channel span for fixed bands.
Definition: LoRaWAN.h:418
LoRaWANChannelSpan_t rx1Span
Default downlink (RX1) channel span for fixed bands.
Definition: LoRaWAN.h:415
IDs of all currently supported bands.
Structure to save information about LoRaWAN channels. To save space, adjacent channels are saved in "...
Definition: LoRaWAN.h:312
bool available
Whether this channel is available for channel selection.
Definition: LoRaWAN.h:332
uint8_t drMax
Maximum allowed datarate for all channels in this span (inclusive)
Definition: LoRaWAN.h:358
uint32_t freqStep
Frequency step between adjacent channels (coded in 100 Hz steps)
Definition: LoRaWAN.h:352
uint8_t drMin
Minimum allowed datarate for all channels in this span.
Definition: LoRaWAN.h:355
Structure to save extra information about uplink/downlink event.
Definition: LoRaWAN.h:492
float freq
Frequency in MHz.
Definition: LoRaWAN.h:510
bool confirmed
Whether the event is confirmed or not (e.g., confirmed uplink sent by user application)
Definition: LoRaWAN.h:497
uint8_t fPort
Port number.
Definition: LoRaWAN.h:519
int16_t power
Transmit power in dBm for uplink, or RSSI for downlink.
Definition: LoRaWAN.h:513
bool confirming
Whether the event is confirming a previous request (e.g., server downlink reply to confirmed uplink s...
Definition: LoRaWAN.h:501
uint8_t datarate
Datarate.
Definition: LoRaWAN.h:507
uint8_t dir
Event direction, one of RADIOLIB_LORAWAN_CHANNEL_DIR_*.
Definition: LoRaWAN.h:494
uint8_t nbTrans
Number of times this uplink was transmitted (ADR)
Definition: LoRaWAN.h:522
uint32_t fCnt
The appropriate frame counter - for different events, different frame counters will be reported!
Definition: LoRaWAN.h:516
bool frmPending
Whether further downlink messages are pending on the server side.
Definition: LoRaWAN.h:504
Structure to save extra information about activation event.
Definition: LoRaWAN.h:477
bool newSession
Whether a new session was started.
Definition: LoRaWAN.h:479
uint32_t joinNonce
The received Join-Request JoinNonce value.
Definition: LoRaWAN.h:485
uint16_t devNonce
The transmitted Join-Request DevNonce value.
Definition: LoRaWAN.h:482
Structure to save extra information about uplink/downlink event.
Definition: LoRaWAN.h:489
float freq
Frequency in MHz.
Definition: LoRaWAN.h:507
bool confirmed
Whether the event is confirmed or not (e.g., confirmed uplink sent by user application)
Definition: LoRaWAN.h:494
uint8_t fPort
Port number.
Definition: LoRaWAN.h:516
int16_t power
Transmit power in dBm for uplink, or RSSI for downlink.
Definition: LoRaWAN.h:510
bool confirming
Whether the event is confirming a previous request (e.g., server downlink reply to confirmed uplink s...
Definition: LoRaWAN.h:498
uint8_t datarate
Datarate.
Definition: LoRaWAN.h:504
uint8_t dir
Event direction, one of RADIOLIB_LORAWAN_CHANNEL_DIR_*.
Definition: LoRaWAN.h:491
uint8_t nbTrans
Number of times this uplink was transmitted (ADR)
Definition: LoRaWAN.h:519
uint32_t fCnt
The appropriate frame counter - for different events, different frame counters will be reported!
Definition: LoRaWAN.h:513
bool frmPending
Whether further downlink messages are pending on the server side.
Definition: LoRaWAN.h:501
Structure to save extra information about activation event.
Definition: LoRaWAN.h:474
bool newSession
Whether a new session was started.
Definition: LoRaWAN.h:476
uint32_t joinNonce
The received Join-Request JoinNonce value.
Definition: LoRaWAN.h:482
uint16_t devNonce
The transmitted Join-Request DevNonce value.
Definition: LoRaWAN.h:479
MAC command specification structure.
Definition: LoRaWAN.h:215
const uint8_t lenDn
Uplink message length.
Definition: LoRaWAN.h:220
const bool user
Whether this MAC command can be issued by the user or not.
Definition: LoRaWAN.h:229
Client for Bell modem communication. The public interface is the same as Arduino Serial.
Definition: BellModem.h:54
Client for FSK-4 communication. The public interface is the same as Arduino Serial.
Definition: FSK4.h:15
Client for Hellschreiber transmissions.
Definition: Hellschreiber.h:90
LoRaWAN-compatible node (class A device).
Definition: LoRaWAN.h:529
LoRaWAN-compatible node (class A device).
Definition: LoRaWAN.h:526
Implements all common low-level methods to control the wireless module. Every module class contains o...
Definition: Module.h:73
Client for Morse Code communication. The public interface is the same as Arduino Serial.
Definition: Morse.h:93
| rx2 | LoRaWANBand_t | |
| txAck | LoRaWANBand_t | |
| txFreqs | LoRaWANBand_t | |
- | txJoinReq | LoRaWANBand_t | |
- | txParamSupported | LoRaWANBand_t | |
- | txSpans | LoRaWANBand_t | |
- | txWoR | LoRaWANBand_t | |
+ | txParamSupported | LoRaWANBand_t | |
+ | txSpans | LoRaWANBand_t | |
+ | txWoR | LoRaWANBand_t | |
diff --git a/struct_lo_ra_w_a_n_band__t.html b/struct_lo_ra_w_a_n_band__t.html
index 0092e549..d0bf9b15 100644
--- a/struct_lo_ra_w_a_n_band__t.html
+++ b/struct_lo_ra_w_a_n_band__t.html
@@ -145,10 +145,6 @@ bool LoRaWANChannel_t | txFreqs [3] |
| | A set of default uplink (TX) channels for dynamic bands.
|
| |
-|
-LoRaWANChannel_t | txJoinReq [3] |
-| | A set of possible extra channels for the Join-Request message for dynamic bands.
|
-| |
|
uint8_t | numTxSpans |
| | The number of TX channel spans for fixed bands.
|
diff --git a/struct_lo_ra_w_a_n_band__t.js b/struct_lo_ra_w_a_n_band__t.js
index ab313b45..43ac30d5 100644
--- a/struct_lo_ra_w_a_n_band__t.js
+++ b/struct_lo_ra_w_a_n_band__t.js
@@ -17,7 +17,6 @@ var struct_lo_ra_w_a_n_band__t =
[ "rx2", "struct_lo_ra_w_a_n_band__t.html#ae3ed10eddc647a6f770121a1662a854f", null ],
[ "txAck", "struct_lo_ra_w_a_n_band__t.html#a709fdad617bd9138eef52bc7220c29f2", null ],
[ "txFreqs", "struct_lo_ra_w_a_n_band__t.html#a9bd952022473cb08e067c763325d689c", null ],
- [ "txJoinReq", "struct_lo_ra_w_a_n_band__t.html#a9f6f43346f7c2e281b90d58a44565d38", null ],
[ "txParamSupported", "struct_lo_ra_w_a_n_band__t.html#a4bbc7445702c32199f0bbd011d6f4da6", null ],
[ "txSpans", "struct_lo_ra_w_a_n_band__t.html#aa37a3cae13a68c2deb2968de26ad9bd3", null ],
[ "txWoR", "struct_lo_ra_w_a_n_band__t.html#a918f643c1fc6df722efd8f969c68cf7e", null ]