diff --git a/_c_c1101_8h_source.html b/_c_c1101_8h_source.html
index 8ee3e696..e4140041 100644
--- a/_c_c1101_8h_source.html
+++ b/_c_c1101_8h_source.html
@@ -732,52 +732,52 @@ $(document).ready(function(){initNavTree('_c_c1101_8h_source.html',''); initResi
int16_t transmit(__FlashStringHelper *fstr, uint8_t addr=0)
Arduino Flash String transmit method.
Definition: PhysicalLayer.cpp:10
-int16_t disableSyncWordFiltering(bool requireCarrierSense=false)
Disable preamble and sync word filtering and generation.
Definition: CC1101.cpp:756
-int16_t startReceive()
Interrupt-driven receive method. GDO0 will be activated when full packet is received.
Definition: CC1101.cpp:323
-size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: CC1101.cpp:721
-uint8_t getLQI() const
Gets LQI (Link Quality Indicator) of the last received packet.
Definition: CC1101.cpp:717
-void clearGdo0Action()
Clears interrupt service routine to call when GDO0 activates.
Definition: CC1101.cpp:230
-int16_t startTransmit(uint8_t *data, size_t len, uint8_t addr=0) override
Interrupt-driven binary transmit method. Overloads for string-based transmissions are implemented in ...
Definition: CC1101.cpp:249
-void setDirectAction(void(*func)(void))
Set interrupt service routine function to call when data bit is receveid in direct mode.
Definition: CC1101.cpp:873
-int16_t variablePacketLengthMode(uint8_t maxLen=CC1101_MAX_PACKET_LENGTH)
Set modem in variable packet length mode.
Definition: CC1101.cpp:739
+int16_t disableSyncWordFiltering(bool requireCarrierSense=false)
Disable preamble and sync word filtering and generation.
Definition: CC1101.cpp:744
+int16_t startReceive()
Interrupt-driven receive method. GDO0 will be activated when full packet is received.
Definition: CC1101.cpp:311
+size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: CC1101.cpp:709
+uint8_t getLQI() const
Gets LQI (Link Quality Indicator) of the last received packet.
Definition: CC1101.cpp:705
+void clearGdo0Action()
Clears interrupt service routine to call when GDO0 activates.
Definition: CC1101.cpp:218
+int16_t startTransmit(uint8_t *data, size_t len, uint8_t addr=0) override
Interrupt-driven binary transmit method. Overloads for string-based transmissions are implemented in ...
Definition: CC1101.cpp:237
+void setDirectAction(void(*func)(void))
Set interrupt service routine function to call when data bit is receveid in direct mode.
Definition: CC1101.cpp:861
+int16_t variablePacketLengthMode(uint8_t maxLen=CC1101_MAX_PACKET_LENGTH)
Set modem in variable packet length mode.
Definition: CC1101.cpp:727
int16_t transmit(uint8_t *data, size_t len, uint8_t addr=0) override
Blocking binary transmit method. Overloads for string-based transmissions are implemented in Physical...
Definition: CC1101.cpp:98
-int16_t setOutputPower(int8_t power)
Sets output power. Allowed values are -30, -20, -15, -10, 0, 5, 7 or 10 dBm.
Definition: CC1101.cpp:514
-int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Allowed values are RADIOLIB_ENCODING_NRZ and RADIOLIB_ENCODING_WHITENING.
Definition: CC1101.cpp:821
+int16_t setOutputPower(int8_t power)
Sets output power. Allowed values are -30, -20, -15, -10, 0, 5, 7 or 10 dBm.
Definition: CC1101.cpp:502
+int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Allowed values are RADIOLIB_ENCODING_NRZ and RADIOLIB_ENCODING_WHITENING.
Definition: CC1101.cpp:809
int16_t readData(String &str, size_t len=0)
Reads data that was received after calling startReceive method.
Definition: PhysicalLayer.cpp:59
-int16_t readData(uint8_t *data, size_t len) override
Reads data received after calling startReceive method.
Definition: CC1101.cpp:344
-void setGdo2Action(void(*func)(void), RADIOLIB_INTERRUPT_STATUS dir=FALLING)
Sets interrupt service routine to call when GDO2 activates.
Definition: CC1101.cpp:234
-bool getPromiscuousMode()
Get whether the modem is in promiscuous mode: no packet filtering (e.g., no preamble,...
Definition: CC1101.cpp:798
-void clearGdo2Action()
Clears interrupt service routine to call when GDO0 activates.
Definition: CC1101.cpp:242
-int16_t setSyncWord(uint8_t syncH, uint8_t syncL, uint8_t maxErrBits=0, bool requireCarrierSense=false)
Sets 16-bit sync word as a two byte value.
Definition: CC1101.cpp:615
-int16_t getChipVersion()
Read version SPI register. Should return CC1101_VERSION_LEGACY (0x04) or CC1101_VERSION_CURRENT (0x14...
Definition: CC1101.cpp:869
-float getRSSI() const
Gets RSSI (Recorded Signal Strength Indicator) of the last received packet.
Definition: CC1101.cpp:707
-int16_t setOOK(bool enableOOK)
Enables/disables OOK modulation instead of FSK.
Definition: CC1101.cpp:678
-int16_t fixedPacketLengthMode(uint8_t len=CC1101_MAX_PACKET_LENGTH)
Set modem in fixed packet length mode.
Definition: CC1101.cpp:735
-int16_t setFrequency(float freq)
Sets carrier frequency. Allowed values are in bands 300.0 to 348.0 MHz, 387.0 to 464....
Definition: CC1101.cpp:425
-int16_t disableAddressFiltering()
Disables address filtering. Calling this method will also erase previously set addresses.
Definition: CC1101.cpp:668
-int16_t setNodeAddress(uint8_t nodeAddr, uint8_t numBroadcastAddrs=0)
Sets node and broadcast addresses. Calling this method will also enable address filtering.
Definition: CC1101.cpp:657
-int16_t setFrequencyDeviation(float freqDev) override
Sets frequency deviation. Allowed values range from 1.587 to 380.8 kHz.
Definition: CC1101.cpp:491
+int16_t readData(uint8_t *data, size_t len) override
Reads data received after calling startReceive method.
Definition: CC1101.cpp:332
+void setGdo2Action(void(*func)(void), RADIOLIB_INTERRUPT_STATUS dir=FALLING)
Sets interrupt service routine to call when GDO2 activates.
Definition: CC1101.cpp:222
+bool getPromiscuousMode()
Get whether the modem is in promiscuous mode: no packet filtering (e.g., no preamble,...
Definition: CC1101.cpp:786
+void clearGdo2Action()
Clears interrupt service routine to call when GDO0 activates.
Definition: CC1101.cpp:230
+int16_t setSyncWord(uint8_t syncH, uint8_t syncL, uint8_t maxErrBits=0, bool requireCarrierSense=false)
Sets 16-bit sync word as a two byte value.
Definition: CC1101.cpp:603
+int16_t getChipVersion()
Read version SPI register. Should return CC1101_VERSION_LEGACY (0x04) or CC1101_VERSION_CURRENT (0x14...
Definition: CC1101.cpp:857
+float getRSSI() const
Gets RSSI (Recorded Signal Strength Indicator) of the last received packet.
Definition: CC1101.cpp:695
+int16_t setOOK(bool enableOOK)
Enables/disables OOK modulation instead of FSK.
Definition: CC1101.cpp:666
+int16_t fixedPacketLengthMode(uint8_t len=CC1101_MAX_PACKET_LENGTH)
Set modem in fixed packet length mode.
Definition: CC1101.cpp:723
+int16_t setFrequency(float freq)
Sets carrier frequency. Allowed values are in bands 300.0 to 348.0 MHz, 387.0 to 464....
Definition: CC1101.cpp:413
+int16_t disableAddressFiltering()
Disables address filtering. Calling this method will also erase previously set addresses.
Definition: CC1101.cpp:656
+int16_t setNodeAddress(uint8_t nodeAddr, uint8_t numBroadcastAddrs=0)
Sets node and broadcast addresses. Calling this method will also enable address filtering.
Definition: CC1101.cpp:645
+int16_t setFrequencyDeviation(float freqDev) override
Sets frequency deviation. Allowed values range from 1.587 to 380.8 kHz.
Definition: CC1101.cpp:479
Provides common interface for protocols that run on LoRa/FSK modules, such as RTTY or LoRaWAN....
Definition: PhysicalLayer.h:14
-int16_t standby() override
Sets the module to standby mode.
Definition: CC1101.cpp:175
+int16_t standby() override
Sets the module to standby mode.
Definition: CC1101.cpp:163
int16_t receive(String &str, size_t len=0)
Arduino String receive method.
Definition: PhysicalLayer.cpp:100
-int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Allowed value is RADI...
Definition: CC1101.cpp:802
-int16_t setRxBandwidth(float rxBw)
Sets receiver bandwidth. Allowed values range from 58.0 to 812.0 kHz.
Definition: CC1101.cpp:471
-int16_t setBitRate(float br)
Sets bit rate. Allowed values range from 0.025 to 600.0 kbps.
Definition: CC1101.cpp:451
-uint8_t randomByte()
Get one truly random byte from RSSI noise.
Definition: CC1101.cpp:849
-int16_t packetMode()
Stops direct mode. It is required to call this method to switch from direct transmissions to packet-b...
Definition: CC1101.cpp:219
+int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Allowed value is RADI...
Definition: CC1101.cpp:790
+int16_t setRxBandwidth(float rxBw)
Sets receiver bandwidth. Allowed values range from 58.0 to 812.0 kHz.
Definition: CC1101.cpp:459
+int16_t setBitRate(float br)
Sets bit rate. Allowed values range from 0.025 to 600.0 kbps.
Definition: CC1101.cpp:439
+uint8_t randomByte()
Get one truly random byte from RSSI noise.
Definition: CC1101.cpp:837
+int16_t packetMode()
Stops direct mode. It is required to call this method to switch from direct transmissions to packet-b...
Definition: CC1101.cpp:207
int16_t begin(float freq=434.0, float br=48.0, float freqDev=48.0, float rxBw=135.0, int8_t power=10, uint8_t preambleLength=16)
Initialization method.
Definition: CC1101.cpp:8
-int16_t setPreambleLength(uint8_t preambleLength)
Sets preamble length.
Definition: CC1101.cpp:620
+int16_t setPreambleLength(uint8_t preambleLength)
Sets preamble length.
Definition: CC1101.cpp:608
Implements all common low-level SPI/UART/I2C methods to control the wireless module....
Definition: Module.h:17
int16_t receive(uint8_t *data, size_t len) override
Blocking binary receive method. Overloads for string-based transmissions are implemented in PhysicalL...
Definition: CC1101.cpp:139
-void readBit(RADIOLIB_PIN_TYPE pin)
Function to read and process data bit in direct reception mode.
Definition: CC1101.cpp:877
-int16_t receiveDirect() override
Starts direct mode reception.
Definition: CC1101.cpp:206
-int16_t enableSyncWordFiltering(uint8_t maxErrBits=0, bool requireCarrierSense=false)
Enable sync word filtering and generation.
Definition: CC1101.cpp:743
-void setGdo0Action(void(*func)(void), RADIOLIB_INTERRUPT_STATUS dir=RISING)
Sets interrupt service routine to call when GDO0 activates.
Definition: CC1101.cpp:226
+void readBit(RADIOLIB_PIN_TYPE pin)
Function to read and process data bit in direct reception mode.
Definition: CC1101.cpp:865
+int16_t receiveDirect() override
Starts direct mode reception.
Definition: CC1101.cpp:194
+int16_t enableSyncWordFiltering(uint8_t maxErrBits=0, bool requireCarrierSense=false)
Enable sync word filtering and generation.
Definition: CC1101.cpp:731
+void setGdo0Action(void(*func)(void), RADIOLIB_INTERRUPT_STATUS dir=RISING)
Sets interrupt service routine to call when GDO0 activates.
Definition: CC1101.cpp:214
Control class for CC1101 module.
Definition: CC1101.h:507
-void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn)
Some modules contain external RF switch controlled by two pins. This function gives RadioLib control ...
Definition: CC1101.cpp:845
-int16_t setPromiscuousMode(bool promiscuous=true)
Set modem in "sniff" mode: no packet filtering (e.g., no preamble, sync word, address,...
Definition: CC1101.cpp:770
-int16_t setCrcFiltering(bool crcOn=true)
Enable CRC filtering and generation.
Definition: CC1101.cpp:760
-int16_t transmitDirect(uint32_t frf=0) override
Starts direct mode transmission.
Definition: CC1101.cpp:184
+void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn)
Some modules contain external RF switch controlled by two pins. This function gives RadioLib control ...
Definition: CC1101.cpp:833
+int16_t setPromiscuousMode(bool promiscuous=true)
Set modem in "sniff" mode: no packet filtering (e.g., no preamble, sync word, address,...
Definition: CC1101.cpp:758
+int16_t setCrcFiltering(bool crcOn=true)
Enable CRC filtering and generation.
Definition: CC1101.cpp:748
+int16_t transmitDirect(uint32_t frf=0) override
Starts direct mode transmission.
Definition: CC1101.cpp:172
CC1101(Module *module)
Default constructor.
Definition: CC1101.cpp:4
int16_t startTransmit(String &str, uint8_t addr=0)
Interrupt-driven Arduino String transmit method. Unlike the standard transmit method,...
Definition: PhysicalLayer.cpp:51