From 6bb2a6304276ee3a0c665604e2c7f4274f64850d Mon Sep 17 00:00:00 2001 From: jgromes Date: Sun, 30 Apr 2023 20:11:49 +0000 Subject: [PATCH] =?UTF-8?q?Deploying=20to=20gh-pages=20from=20=20@=202eff7?= =?UTF-8?q?a358fe4b61ac5c64b39d382784eabdc93d5=20=F0=9F=9A=80?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- _module_8h_source.html | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/_module_8h_source.html b/_module_8h_source.html index aa6b2e31..e319298c 100644 --- a/_module_8h_source.html +++ b/_module_8h_source.html @@ -253,16 +253,16 @@ $(document).ready(function(){initNavTree('_module_8h_source.html',''); initResiz
Module::SPIstatusCommand
uint8_t SPIstatusCommand
Basic SPI status read command. Defaults to 0x00.
Definition: Module.h:142
Module::SPIsetRegValue
int16_t SPIsetRegValue(uint16_t reg, uint8_t value, uint8_t msb=7, uint8_t lsb=0, uint8_t checkInterval=2, uint8_t checkMask=0xFF)
Overwrite-safe SPI write method with verification. This method is the preferred SPI write mechanism.
Definition: Module.cpp:64
Module::RFSWITCH_MAX_PINS
static const size_t RFSWITCH_MAX_PINS
The maximum number of pins supported by the RF switch code.
Definition: Module.h:42
-
Module::flipBits16
static uint16_t flipBits16(uint16_t i)
Function to reflect bits within an integer.
Definition: Module.cpp:383
+
Module::flipBits16
static uint16_t flipBits16(uint16_t i)
Function to reflect bits within an integer.
Definition: Module.cpp:382
Module::SPIstreamType
bool SPIstreamType
Whether the SPI interface is stream-type (e.g. SX126x) or register-type (e.g. SX127x)....
Definition: Module.h:153
Module::SPIwriteRegister
void SPIwriteRegister(uint16_t reg, uint8_t data)
SPI basic write method. Use of this method is reserved for special cases, SPIsetRegValue should be us...
Definition: Module.cpp:132
Module::hal
RadioLibHal * hal
Hardware abstraction layer to be used.
Definition: Module.h:122
Module::term
void term()
Terminate low-level module control.
Definition: Module.cpp:49
Module::SPInopCommand
uint8_t SPInopCommand
Basic SPI no-operation command. Defaults to 0x00.
Definition: Module.h:137
-
Module::waitForMicroseconds
void waitForMicroseconds(uint32_t start, uint32_t len)
Wait for time to elapse, either using the microsecond timer, or the TimerFlag. Note that in interrupt...
Definition: Module.cpp:358
+
Module::waitForMicroseconds
void waitForMicroseconds(uint32_t start, uint32_t len)
Wait for time to elapse, either using the microsecond timer, or the TimerFlag. Note that in interrupt...
Definition: Module.cpp:357
Module::operator=
Module & operator=(const Module &mod)
Overload for assignment operator.
Definition: Module.cpp:33
Module::getGpio
uint32_t getGpio() const
Access method to get the pin number of second interrupt/GPIO.
Definition: Module.h:355
-
Module::findRfSwitchMode
const RfSwitchMode_t * findRfSwitchMode(uint8_t mode) const
Find a mode in the RfSwitchTable.
Definition: Module.cpp:498
+
Module::findRfSwitchMode
const RfSwitchMode_t * findRfSwitchMode(uint8_t mode) const
Find a mode in the RfSwitchTable.
Definition: Module.cpp:497
Module::OpMode_t
OpMode_t
Definition: Module.h:61
Module::MODE_TX
@ MODE_TX
Definition: Module.h:71
Module::MODE_IDLE
@ MODE_IDLE
Definition: Module.h:67
@@ -272,8 +272,8 @@ $(document).ready(function(){initNavTree('_module_8h_source.html',''); initResiz
Module::SPIstreamError
int16_t SPIstreamError
The last recorded SPI stream error.
Definition: Module.h:158
Module::SPIwriteStream
int16_t SPIwriteStream(uint8_t cmd, uint8_t *data, size_t numBytes, bool waitForGpio=true, bool verify=true)
Method to perform a write transaction with SPI stream.
Definition: Module.cpp:207
Module::SPItransfer
void SPItransfer(uint8_t cmd, uint16_t reg, uint8_t *dataOut, uint8_t *dataIn, size_t numBytes)
SPI single transfer method.
Definition: Module.cpp:141
-
Module::setRfSwitchPins
void setRfSwitchPins(uint32_t rxEn, uint32_t txEn)
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: Module.cpp:475
-
Module::flipBits
static uint8_t flipBits(uint8_t b)
Function to reflect bits within a byte.
Definition: Module.cpp:376
+
Module::setRfSwitchPins
void setRfSwitchPins(uint32_t rxEn, uint32_t txEn)
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: Module.cpp:474
+
Module::flipBits
static uint8_t flipBits(uint8_t b)
Function to reflect bits within a byte.
Definition: Module.cpp:375
Module::Module
Module(RadioLibHal *hal, uint32_t cs, uint32_t irq, uint32_t rst, uint32_t gpio=RADIOLIB_NC)
Module constructor.
Definition: Module.cpp:25
Module::SPIreadCommand
uint8_t SPIreadCommand
Basic SPI read command. Defaults to 0x00.
Definition: Module.h:127
Module::SPIreadRegisterBurst
void SPIreadRegisterBurst(uint16_t reg, size_t numBytes, uint8_t *inBytes)
SPI burst read method.
Definition: Module.cpp:103
@@ -282,17 +282,17 @@ $(document).ready(function(){initNavTree('_module_8h_source.html',''); initResiz
Module::getCs
uint32_t getCs() const
Access method to get the pin number of SPI chip select.
Definition: Module.h:337
Module::getIrq
uint32_t getIrq() const
Access method to get the pin number of interrupt/GPIO.
Definition: Module.h:343
Module::SPIreadStream
int16_t SPIreadStream(uint8_t cmd, uint8_t *data, size_t numBytes, bool waitForGpio=true, bool verify=true)
Method to perform a read transaction with SPI stream.
Definition: Module.cpp:190
-
Module::regdump
void regdump(uint16_t start, size_t len)
Function to dump device registers as hex into the debug port.
Definition: Module.cpp:436
+
Module::regdump
void regdump(uint16_t start, size_t len)
Function to dump device registers as hex into the debug port.
Definition: Module.cpp:435
Module::SPIaddrWidth
uint8_t SPIaddrWidth
SPI address width. Defaults to 8, currently only supports 8 and 16-bit addresses.
Definition: Module.h:147
-
Module::setRfSwitchTable
void setRfSwitchTable(const uint32_t(&pins)[RFSWITCH_MAX_PINS], const RfSwitchMode_t table[])
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: Module.cpp:491
+
Module::setRfSwitchTable
void setRfSwitchTable(const uint32_t(&pins)[RFSWITCH_MAX_PINS], const RfSwitchMode_t table[])
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: Module.cpp:490
Module::SPItransferStream
int16_t SPItransferStream(uint8_t *cmd, uint8_t cmdLen, bool write, uint8_t *dataOut, uint8_t *dataIn, size_t numBytes, bool waitForGpio, uint32_t timeout)
SPI single transfer method for modules with stream-type SPI interface (SX126x, SX128x etc....
Definition: Module.cpp:243
-
Module::hexdump
static void hexdump(uint8_t *data, size_t len, uint32_t offset=0, uint8_t width=1, bool be=false)
Function to dump data as hex into the debug port.
Definition: Module.cpp:391
+
Module::hexdump
static void hexdump(uint8_t *data, size_t len, uint32_t offset=0, uint8_t width=1, bool be=false)
Function to dump data as hex into the debug port.
Definition: Module.cpp:390
Module::init
void init()
Initialize low-level module control.
Definition: Module.cpp:43
Module::getRst
uint32_t getRst() const
Access method to get the pin number of hardware reset pin.
Definition: Module.h:349
Module::SPIwriteCommand
uint8_t SPIwriteCommand
Basic SPI write command. Defaults to 0x80.
Definition: Module.h:132
Module::SPIwriteRegisterBurst
void SPIwriteRegisterBurst(uint16_t reg, uint8_t *data, size_t numBytes)
SPI burst write method.
Definition: Module.cpp:123
Module::SPIparseStatusCb
SPIparseStatusCb_t SPIparseStatusCb
Callback to function that will parse the module-specific status codes to RadioLib status codes....
Definition: Module.h:169
-
Module::setRfSwitchState
void setRfSwitchState(uint8_t mode)
Set RF switch state.
Definition: Module.cpp:508
+
Module::setRfSwitchState
void setRfSwitchState(uint8_t mode)
Set RF switch state.
Definition: Module.cpp:507
RadioLibHal
Definition: Hal.h:11
RADIOLIB_ERR_UNKNOWN
#define RADIOLIB_ERR_UNKNOWN
There was an unexpected, unknown error. If you see this, something went incredibly wrong....
Definition: TypeDef.h:110
Module::RfSwitchMode_t
Definition: Module.h:49