diff --git a/_s_x127x_8h_source.html b/_s_x127x_8h_source.html index 224fdbdc..089af1cc 100644 --- a/_s_x127x_8h_source.html +++ b/_s_x127x_8h_source.html @@ -920,92 +920,92 @@ $(document).ready(function(){initNavTree('_s_x127x_8h_source.html',''); initResi
PhysicalLayer::getRSSI
virtual float getRSSI()
Gets RSSI (Recorded Signal Strength Indicator) of the last received packet.
Definition: PhysicalLayer.cpp:295
PhysicalLayer::receive
virtual int16_t receive(uint8_t *data, size_t len)
Binary receive method. Must be implemented in module class.
Definition: PhysicalLayer.cpp:112
SX127x
Base class for SX127x series. All derived classes for SX127x (e.g. SX1278 or SX1272) inherit from thi...
Definition: SX127x.h:583
-
SX127x::irqRxDoneRxTimeout
int16_t irqRxDoneRxTimeout(uint32_t &irqFlags, uint32_t &irqMask) override
Create the flags that make up RxDone and RxTimeout used for receiving downlinks.
Definition: SX127x.cpp:1292
+
SX127x::irqRxDoneRxTimeout
int16_t irqRxDoneRxTimeout(uint32_t &irqFlags, uint32_t &irqMask) override
Create the flags that make up RxDone and RxTimeout used for receiving downlinks.
Definition: SX127x.cpp:1298
SX127x::packetMode
int16_t packetMode()
Disables direct mode and enables packet mode, allowing the module to receive packets....
Definition: SX127x.cpp:355
SX127x::clearChannelScanAction
void clearChannelScanAction() override
Clears interrupt service routine to call when a channel scan is finished.
Definition: SX127x.cpp:480
-
SX127x::readBit
void readBit(uint32_t pin) override
Function to read and process data bit in direct reception mode.
Definition: SX127x.cpp:1643
+
SX127x::readBit
void readBit(uint32_t pin) override
Function to read and process data bit in direct reception mode.
Definition: SX127x.cpp:1649
SX127x::clearFifoFullAction
void clearFifoFullAction()
Clears interrupt service routine to call when FIFO is full.
Definition: SX127x.cpp:502
SX127x::scanChannel
int16_t scanChannel() override
Performs scan for valid LoRa preamble in the current channel.
Definition: SX127x.cpp:252
-
SX127x::setOokFixedOrFloorThreshold
int16_t setOokFixedOrFloorThreshold(uint8_t value)
Fixed threshold for the Data Slicer in OOK mode or floor threshold for the Data Slicer in OOK when Pe...
Definition: SX127x.cpp:1113
-
SX127x::enableBitSync
int16_t enableBitSync()
Enable Bit synchronizer.
Definition: SX127x.cpp:1137
-
SX127x::variablePacketLengthMode
int16_t variablePacketLengthMode(uint8_t maxLen=RADIOLIB_SX127X_MAX_PACKET_LENGTH_FSK)
Set modem in variable packet length mode. Available in FSK mode only.
Definition: SX127x.cpp:1217
+
SX127x::setOokFixedOrFloorThreshold
int16_t setOokFixedOrFloorThreshold(uint8_t value)
Fixed threshold for the Data Slicer in OOK mode or floor threshold for the Data Slicer in OOK when Pe...
Definition: SX127x.cpp:1119
+
SX127x::enableBitSync
int16_t enableBitSync()
Enable Bit synchronizer.
Definition: SX127x.cpp:1143
+
SX127x::variablePacketLengthMode
int16_t variablePacketLengthMode(uint8_t maxLen=RADIOLIB_SX127X_MAX_PACKET_LENGTH_FSK)
Set modem in variable packet length mode. Available in FSK mode only.
Definition: SX127x.cpp:1223
SX127x::sleep
int16_t sleep() override
Sets the LoRa module to sleep to save power. Module will not be able to transmit or receive any data ...
Definition: SX127x.cpp:268
SX127x::setFifoFullAction
void setFifoFullAction(void(*func)(void))
Set interrupt service routine function to call when FIFO is full.
Definition: SX127x.cpp:493
-
SX127x::setOOK
int16_t setOOK(bool enableOOK)
Enables/disables OOK modulation instead of FSK.
Definition: SX127x.cpp:1145
+
SX127x::setOOK
int16_t setOOK(bool enableOOK)
Enables/disables OOK modulation instead of FSK.
Definition: SX127x.cpp:1151
SX127x::fifoGet
bool fifoGet(volatile uint8_t *data, int totalLen, volatile int *rcvLen)
Set interrupt service routine function to call when FIFO is sufficiently full to read.
Definition: SX127x.cpp:530
-
SX127x::setRxBandwidth
int16_t setRxBandwidth(float rxBw)
Sets FSK receiver bandwidth. Allowed values range from 2.6 to 250 kHz. Only available in FSK mode.
Definition: SX127x.cpp:967
-
SX127x::getModemStatus
uint8_t getModemStatus()
Reads modem status. Only available in LoRa mode.
Definition: SX127x.cpp:1384
+
SX127x::setRxBandwidth
int16_t setRxBandwidth(float rxBw)
Sets FSK receiver bandwidth. Allowed values range from 2.6 to 250 kHz. Only available in FSK mode.
Definition: SX127x.cpp:973
+
SX127x::getModemStatus
uint8_t getModemStatus()
Reads modem status. Only available in LoRa mode.
Definition: SX127x.cpp:1390
SX127x::clearPacketSentAction
void clearPacketSentAction() override
Clears interrupt service routine to call when a packet is sent.
Definition: SX127x.cpp:472
SX127x::reset
virtual void reset()=0
Reset method. Will reset the chip to the default state using RST pin. Declared pure virtual since SX1...
SX127x::setPacketSentAction
void setPacketSentAction(void(*func)(void)) override
Sets interrupt service routine to call when a packet is sent.
Definition: SX127x.cpp:468
SX127x::readData
virtual int16_t readData(uint8_t *data, size_t len)
Reads data that was received after calling startReceive method.
Definition: PhysicalLayer.cpp:209
-
SX127x::invertIQ
int16_t invertIQ(bool enable) override
Enable/disable inversion of the I and Q signals.
Definition: SX127x.cpp:1616
+
SX127x::invertIQ
int16_t invertIQ(bool enable) override
Enable/disable inversion of the I and Q signals.
Definition: SX127x.cpp:1622
SX127x::fifoAdd
bool fifoAdd(uint8_t *data, int totalLen, int *remLen)
Set interrupt service routine function to call when FIFO is empty.
Definition: SX127x.cpp:507
-
SX127x::setCurrentLimit
int16_t setCurrentLimit(uint8_t currentLimit)
Sets current limit for over current protection at transmitter amplifier. Allowed values range from 45...
Definition: SX127x.cpp:733
-
SX127x::clearFHSSInt
void clearFHSSInt(void)
Clear the FHSS interrupt.
Definition: SX127x.cpp:1660
-
SX127x::setAFC
int16_t setAFC(bool isEnabled)
Enables or disables FSK automatic frequency correction(AFC)
Definition: SX127x.cpp:999
-
SX127x::setFrequencyDeviation
int16_t setFrequencyDeviation(float freqDev) override
Sets FSK frequency deviation from carrier frequency. Allowed values depend on bit rate setting and mu...
Definition: SX127x.cpp:925
-
SX127x::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: SX127x.cpp:1185
-
SX127x::getSNR
float getSNR() override
Gets signal-to-noise ratio of the latest received packet. Only available in LoRa mode.
Definition: SX127x.cpp:874
-
SX127x::setOokPeakThresholdStep
int16_t setOokPeakThresholdStep(uint8_t value)
Size of each decrement of the RSSI threshold in the OOK demodulator.
Definition: SX127x.cpp:1129
+
SX127x::setCurrentLimit
int16_t setCurrentLimit(uint8_t currentLimit)
Sets current limit for over current protection at transmitter amplifier. Allowed values range from 45...
Definition: SX127x.cpp:739
+
SX127x::clearFHSSInt
void clearFHSSInt(void)
Clear the FHSS interrupt.
Definition: SX127x.cpp:1666
+
SX127x::setAFC
int16_t setAFC(bool isEnabled)
Enables or disables FSK automatic frequency correction(AFC)
Definition: SX127x.cpp:1005
+
SX127x::setFrequencyDeviation
int16_t setFrequencyDeviation(float freqDev) override
Sets FSK frequency deviation from carrier frequency. Allowed values depend on bit rate setting and mu...
Definition: SX127x.cpp:931
+
SX127x::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: SX127x.cpp:1191
+
SX127x::getSNR
float getSNR() override
Gets signal-to-noise ratio of the latest received packet. Only available in LoRa mode.
Definition: SX127x.cpp:880
+
SX127x::setOokPeakThresholdStep
int16_t setOokPeakThresholdStep(uint8_t value)
Size of each decrement of the RSSI threshold in the OOK demodulator.
Definition: SX127x.cpp:1135
SX127x::transmit
int16_t transmit(const char *str, uint8_t addr=0)
C-string transmit method.
Definition: PhysicalLayer.cpp:52
-
SX127x::getAFCError
float getAFCError()
Gets current AFC error.
Definition: SX127x.cpp:858
-
SX127x::setRSSIThreshold
int16_t setRSSIThreshold(float dbm)
Sets the RSSI value above which the RSSI interrupt is signaled.
Definition: SX127x.cpp:1315
-
SX127x::getFHSSChannel
uint8_t getFHSSChannel(void)
Gets the FHSS channel in use.
Definition: SX127x.cpp:1656
-
SX127x::invertPreamble
int16_t invertPreamble(bool enable)
Invert FSK preamble polarity. The default (non-inverted) is 0x55, the inverted is 0xAA.
Definition: SX127x.cpp:786
-
SX127x::isRxTimeout
bool isRxTimeout() override
Check whether the IRQ bit for RxTimeout is set.
Definition: SX127x.cpp:1299
-
SX127x::setAFCBandwidth
int16_t setAFCBandwidth(float afcBw)
Sets FSK automatic frequency correction bandwidth. Allowed values range from 2.6 to 250 kHz....
Definition: SX127x.cpp:983
+
SX127x::getAFCError
float getAFCError()
Gets current AFC error.
Definition: SX127x.cpp:864
+
SX127x::setRSSIThreshold
int16_t setRSSIThreshold(float dbm)
Sets the RSSI value above which the RSSI interrupt is signaled.
Definition: SX127x.cpp:1321
+
SX127x::getFHSSChannel
uint8_t getFHSSChannel(void)
Gets the FHSS channel in use.
Definition: SX127x.cpp:1662
+
SX127x::invertPreamble
int16_t invertPreamble(bool enable)
Invert FSK preamble polarity. The default (non-inverted) is 0x55, the inverted is 0xAA.
Definition: SX127x.cpp:792
+
SX127x::isRxTimeout
bool isRxTimeout() override
Check whether the IRQ bit for RxTimeout is set.
Definition: SX127x.cpp:1305
+
SX127x::setAFCBandwidth
int16_t setAFCBandwidth(float afcBw)
Sets FSK automatic frequency correction bandwidth. Allowed values range from 2.6 to 250 kHz....
Definition: SX127x.cpp:989
SX127x::clearPacketReceivedAction
void clearPacketReceivedAction() override
Clears interrupt service routine to call when a packet is received.
Definition: SX127x.cpp:464
-
SX127x::startChannelScan
int16_t startChannelScan() override
Interrupt-driven channel activity detection method. DIO0 will be activated when LoRa preamble is dete...
Definition: SX127x.cpp:688
-
SX127x::fixedPacketLengthMode
int16_t fixedPacketLengthMode(uint8_t len=RADIOLIB_SX127X_MAX_PACKET_LENGTH_FSK)
Set modem in fixed packet length mode. Available in FSK mode only.
Definition: SX127x.cpp:1213
+
SX127x::startChannelScan
int16_t startChannelScan() override
Interrupt-driven channel activity detection method. DIO0 will be activated when LoRa preamble is dete...
Definition: SX127x.cpp:694
+
SX127x::fixedPacketLengthMode
int16_t fixedPacketLengthMode(uint8_t len=RADIOLIB_SX127X_MAX_PACKET_LENGTH_FSK)
Set modem in fixed packet length mode. Available in FSK mode only.
Definition: SX127x.cpp:1219
SX127x::setFifoEmptyAction
void setFifoEmptyAction(void(*func)(void))
Set interrupt service routine function to call when FIFO is empty.
Definition: SX127x.cpp:484
SX127x::clearDio0Action
void clearDio0Action()
Clears interrupt service routine to call when DIO0 activates.
Definition: SX127x.cpp:442
SX127x::standby
int16_t standby() override
Sets the LoRa module to standby.
Definition: SX127x.cpp:276
SX127x::setDio1Action
void setDio1Action(void(*func)(void), uint32_t dir)
Set interrupt service routine function to call when DIO1 activates.
Definition: SX127x.cpp:446
-
SX127x::setDIOPreambleDetect
int16_t setDIOPreambleDetect(bool usePreambleDetect)
Configure DIO mapping to use RSSI or Preamble Detect for pins that support it.
Definition: SX127x.cpp:1679
-
SX127x::setFHSSHoppingPeriod
int16_t setFHSSHoppingPeriod(uint8_t freqHoppingPeriod)
Sets the hopping period and enables FHSS.
Definition: SX127x.cpp:1648
+
SX127x::setDIOPreambleDetect
int16_t setDIOPreambleDetect(bool usePreambleDetect)
Configure DIO mapping to use RSSI or Preamble Detect for pins that support it.
Definition: SX127x.cpp:1685
+
SX127x::setFHSSHoppingPeriod
int16_t setFHSSHoppingPeriod(uint8_t freqHoppingPeriod)
Sets the hopping period and enables FHSS.
Definition: SX127x.cpp:1654
SX127x::finishTransmit
int16_t finishTransmit() override
Clean up after transmission is done.
Definition: SX127x.cpp:624
-
SX127x::disableBitSync
int16_t disableBitSync()
Disable Bit synchronizer (not allowed in Packet mode).
Definition: SX127x.cpp:1141
-
SX127x::getChannelScanResult
int16_t getChannelScanResult() override
Read the channel scan result.
Definition: SX127x.cpp:713
-
SX127x::setPreambleLength
int16_t setPreambleLength(size_t preambleLength) override
Sets LoRa or FSK preamble length. Allowed values range from 6 to 65535 in LoRa mode or 0 to 65535 in ...
Definition: SX127x.cpp:757
-
SX127x::setOokThresholdType
int16_t setOokThresholdType(uint8_t type)
Selects the type of threshold in the OOK data slicer.
Definition: SX127x.cpp:1105
-
SX127x::setRfSwitchPins
void setRfSwitchPins(uint32_t rxEn, uint32_t txEn)
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: SX127x.cpp:1394
+
SX127x::disableBitSync
int16_t disableBitSync()
Disable Bit synchronizer (not allowed in Packet mode).
Definition: SX127x.cpp:1147
+
SX127x::getChannelScanResult
int16_t getChannelScanResult() override
Read the channel scan result.
Definition: SX127x.cpp:719
+
SX127x::setPreambleLength
int16_t setPreambleLength(size_t preambleLength) override
Sets LoRa or FSK preamble length. Allowed values range from 6 to 65535 in LoRa mode or 0 to 65535 in ...
Definition: SX127x.cpp:763
+
SX127x::setOokThresholdType
int16_t setOokThresholdType(uint8_t type)
Selects the type of threshold in the OOK data slicer.
Definition: SX127x.cpp:1111
+
SX127x::setRfSwitchPins
void setRfSwitchPins(uint32_t rxEn, uint32_t txEn)
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: SX127x.cpp:1400
SX127x::startTransmit
int16_t startTransmit(const char *str, uint8_t addr=0)
Interrupt-driven Arduino String transmit method. Unlike the standard transmit method,...
Definition: PhysicalLayer.cpp:149
-
SX127x::getTempRaw
int8_t getTempRaw()
Reads uncalibrated temperature value. This function will change operating mode and should not be call...
Definition: SX127x.cpp:1431
-
SX127x::randomByte
uint8_t randomByte() override
Get one truly random byte from RSSI noise.
Definition: SX127x.cpp:1402
+
SX127x::getTempRaw
int8_t getTempRaw()
Reads uncalibrated temperature value. This function will change operating mode and should not be call...
Definition: SX127x.cpp:1437
+
SX127x::randomByte
uint8_t randomByte() override
Get one truly random byte from RSSI noise.
Definition: SX127x.cpp:1408
SX127x::clearDio1Action
void clearDio1Action()
Clears interrupt service routine to call when DIO1 activates.
Definition: SX127x.cpp:453
-
SX127x::setLowBatteryThreshold
int16_t setLowBatteryThreshold(int8_t level, uint32_t pin=RADIOLIB_NC)
Set low battery indicator threshold.
Definition: SX127x.cpp:1724
-
SX127x::getTimeOnAir
RadioLibTime_t getTimeOnAir(size_t len) override
Get expected time-on-air for a given size of payload.
Definition: SX127x.cpp:1247
+
SX127x::setLowBatteryThreshold
int16_t setLowBatteryThreshold(int8_t level, uint32_t pin=RADIOLIB_NC)
Set low battery indicator threshold.
Definition: SX127x.cpp:1730
+
SX127x::getTimeOnAir
RadioLibTime_t getTimeOnAir(size_t len) override
Get expected time-on-air for a given size of payload.
Definition: SX127x.cpp:1253
SX127x::receiveDirect
int16_t receiveDirect() override
Enables direct reception mode on pins DIO1 (clock) and DIO2 (data). While in direct mode,...
Definition: SX127x.cpp:318
SX127x::clearFifoEmptyAction
void clearFifoEmptyAction()
Clears interrupt service routine to call when FIFO is empty.
Definition: SX127x.cpp:489
-
SX127x::setOokPeakThresholdDecrement
int16_t setOokPeakThresholdDecrement(uint8_t value)
Period of decrement of the RSSI threshold in the OOK demodulator.
Definition: SX127x.cpp:1121
-
SX127x::setAFCAGCTrigger
int16_t setAFCAGCTrigger(uint8_t trigger)
Controls trigger of AFC and AGC.
Definition: SX127x.cpp:1009
-
SX127x::setCrcFiltering
int16_t setCrcFiltering(bool enable=true)
Enable CRC filtering and generation.
Definition: SX127x.cpp:1305
+
SX127x::setOokPeakThresholdDecrement
int16_t setOokPeakThresholdDecrement(uint8_t value)
Period of decrement of the RSSI threshold in the OOK demodulator.
Definition: SX127x.cpp:1127
+
SX127x::setAFCAGCTrigger
int16_t setAFCAGCTrigger(uint8_t trigger)
Controls trigger of AFC and AGC.
Definition: SX127x.cpp:1015
+
SX127x::setCrcFiltering
int16_t setCrcFiltering(bool enable=true)
Enable CRC filtering and generation.
Definition: SX127x.cpp:1311
SX127x::receive
virtual int16_t receive(uint8_t *data, size_t len)
Binary receive method. Must be implemented in module class.
Definition: PhysicalLayer.cpp:112
-
SX127x::setRfSwitchTable
void setRfSwitchTable(const uint32_t(&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[])
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: SX127x.cpp:1398
-
SX127x::setNodeAddress
int16_t setNodeAddress(uint8_t nodeAddr)
Sets FSK node address. Calling this method will enable address filtering. Only available in FSK mode.
Definition: SX127x.cpp:1059
-
SX127x::setEncoding
int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Only available in FSK mode. Allowed values are RADIOLIB_ENCODING_NRZ,...
Definition: SX127x.cpp:1350
+
SX127x::setRfSwitchTable
void setRfSwitchTable(const uint32_t(&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[])
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: SX127x.cpp:1404
+
SX127x::setNodeAddress
int16_t setNodeAddress(uint8_t nodeAddr)
Sets FSK node address. Calling this method will enable address filtering. Only available in FSK mode.
Definition: SX127x.cpp:1065
+
SX127x::setEncoding
int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Only available in FSK mode. Allowed values are RADIOLIB_ENCODING_NRZ,...
Definition: SX127x.cpp:1356
SX127x::startReceive
int16_t startReceive() override
Interrupt-driven receive method with default parameters. Implemented for compatibility with PhysicalL...
Definition: SX127x.cpp:364
-
SX127x::setBroadcastAddress
int16_t setBroadcastAddress(uint8_t broadAddr)
Sets FSK broadcast address. Calling this method will enable address filtering. Only available in FSK ...
Definition: SX127x.cpp:1073
-
SX127x::getNumSymbols
float getNumSymbols(size_t len)
Convert from bytes to LoRa symbols.
Definition: SX127x.cpp:1221
+
SX127x::setBroadcastAddress
int16_t setBroadcastAddress(uint8_t broadAddr)
Sets FSK broadcast address. Calling this method will enable address filtering. Only available in FSK ...
Definition: SX127x.cpp:1079
+
SX127x::getNumSymbols
float getNumSymbols(size_t len)
Convert from bytes to LoRa symbols.
Definition: SX127x.cpp:1227
SX127x::setChannelScanAction
void setChannelScanAction(void(*func)(void)) override
Sets interrupt service routine to call when a channel scan is finished.
Definition: SX127x.cpp:476
-
SX127x::setSyncWord
int16_t setSyncWord(uint8_t syncWord)
Sets LoRa sync word. Only available in LoRa mode.
Definition: SX127x.cpp:720
-
SX127x::getIRQFlags
uint16_t getIRQFlags()
Reads currently active IRQ flags, can be used to check which event caused an interrupt....
Definition: SX127x.cpp:1369
+
SX127x::setSyncWord
int16_t setSyncWord(uint8_t syncWord)
Sets LoRa sync word. Only available in LoRa mode.
Definition: SX127x.cpp:726
+
SX127x::getIRQFlags
uint16_t getIRQFlags()
Reads currently active IRQ flags, can be used to check which event caused an interrupt....
Definition: SX127x.cpp:1375
SX127x::SX127x
SX127x(Module *mod)
Default constructor. Called internally when creating new LoRa instance.
Definition: SX127x.cpp:5
-
SX127x::setRSSIConfig
int16_t setRSSIConfig(uint8_t smoothingSamples, int8_t offset=0)
Sets RSSI measurement configuration in FSK mode.
Definition: SX127x.cpp:1321
-
SX127x::getFHSSHoppingPeriod
uint8_t getFHSSHoppingPeriod(void)
Gets FHSS hopping period.
Definition: SX127x.cpp:1652
-
SX127x::calculateRxTimeout
RadioLibTime_t calculateRxTimeout(RadioLibTime_t timeoutUs) override
Calculate the timeout value for this specific module / series (in number of symbols or units of time)
Definition: SX127x.cpp:1283
-
SX127x::getDataRate
float getDataRate() const
Get data rate of the latest transmitted packet.
Definition: SX127x.cpp:885
+
SX127x::setRSSIConfig
int16_t setRSSIConfig(uint8_t smoothingSamples, int8_t offset=0)
Sets RSSI measurement configuration in FSK mode.
Definition: SX127x.cpp:1327
+
SX127x::getFHSSHoppingPeriod
uint8_t getFHSSHoppingPeriod(void)
Gets FHSS hopping period.
Definition: SX127x.cpp:1658
+
SX127x::calculateRxTimeout
RadioLibTime_t calculateRxTimeout(RadioLibTime_t timeoutUs) override
Calculate the timeout value for this specific module / series (in number of symbols or units of time)
Definition: SX127x.cpp:1289
+
SX127x::getDataRate
float getDataRate() const
Get data rate of the latest transmitted packet.
Definition: SX127x.cpp:891
SX127x::setPacketReceivedAction
void setPacketReceivedAction(void(*func)(void)) override
Sets interrupt service routine to call when a packet is received.
Definition: SX127x.cpp:460
-
SX127x::setDirectAction
void setDirectAction(void(*func)(void)) override
Set interrupt service routine function to call when data bit is received in direct mode.
Definition: SX127x.cpp:1639
+
SX127x::setDirectAction
void setDirectAction(void(*func)(void)) override
Set interrupt service routine function to call when data bit is received in direct mode.
Definition: SX127x.cpp:1645
SX127x::setDio0Action
void setDio0Action(void(*func)(void), uint32_t dir)
Set interrupt service routine function to call when DIO0 activates.
Definition: SX127x.cpp:438
SX127x::begin
int16_t begin(uint8_t *chipVersions, uint8_t numVersions, uint8_t syncWord, uint16_t preambleLength)
Initialization method. Will be called with appropriate parameters when calling initialization method ...
Definition: SX127x.cpp:9
-
SX127x::getChipVersion
int16_t getChipVersion()
Read version SPI register. Should return SX1278_CHIP_VERSION (0x12) or SX1272_CHIP_VERSION (0x22) if ...
Definition: SX127x.cpp:1427
+
SX127x::getChipVersion
int16_t getChipVersion()
Read version SPI register. Should return SX1278_CHIP_VERSION (0x12) or SX1272_CHIP_VERSION (0x22) if ...
Definition: SX127x.cpp:1433
SX127x::transmitDirect
int16_t transmitDirect(uint32_t frf=0) override
Enables direct transmission mode on pins DIO1 (clock) and DIO2 (data). While in direct mode,...
Definition: SX127x.cpp:289
-
SX127x::getFrequencyError
float getFrequencyError(bool autoCorrect=false)
Gets frequency error of the latest received packet.
Definition: SX127x.cpp:805
-
SX127x::setDIOMapping
int16_t setDIOMapping(uint32_t pin, uint32_t value) override
Configure DIO pin mapping to get a given signal on a DIO pin (if available).
Definition: SX127x.cpp:1669
+
SX127x::getFrequencyError
float getFrequencyError(bool autoCorrect=false)
Gets frequency error of the latest received packet.
Definition: SX127x.cpp:811
+
SX127x::setDIOMapping
int16_t setDIOMapping(uint32_t pin, uint32_t value) override
Configure DIO pin mapping to get a given signal on a DIO pin (if available).
Definition: SX127x.cpp:1675
SX127x::beginFSK
int16_t beginFSK(uint8_t *chipVersions, uint8_t numVersions, float freqDev, float rxBw, uint16_t preambleLength, bool enableOOK)
Initialization method for FSK modem. Will be called with appropriate parameters when calling FSK init...
Definition: SX127x.cpp:60
-
SX127x::disableAddressFiltering
int16_t disableAddressFiltering()
Disables FSK address filtering.
Definition: SX127x.cpp:1087
+
SX127x::disableAddressFiltering
int16_t disableAddressFiltering()
Disables FSK address filtering.
Definition: SX127x.cpp:1093
RadioLibTime_t
unsigned long RadioLibTime_t
Type used for durations in RadioLib.
Definition: TypeDef.h:616
Module::RfSwitchMode_t
Description of RF switch pin states for a single mode. See setRfSwitchTable for details.
Definition: Module.h:81