diff --git a/_lo_ra_w_a_n_8h_source.html b/_lo_ra_w_a_n_8h_source.html
index 971bc99f..ac7bae99 100644
--- a/_lo_ra_w_a_n_8h_source.html
+++ b/_lo_ra_w_a_n_8h_source.html
@@ -837,39 +837,39 @@ $(document).ready(function(){initNavTree('_lo_ra_w_a_n_8h_source.html',''); init
LoRaWAN-compatible node (class A device).
Definition: LoRaWAN.h:524
void clearSession()
Clear an active session, so that the device will have to rejoin the network.
Definition: LoRaWAN.cpp:69
int16_t setBufferNonces(uint8_t *persistentBuffer)
Fill the internal buffer that holds the LW base parameters with a supplied buffer.
Definition: LoRaWAN.cpp:85
-int16_t setDatarate(uint8_t drUp)
Set uplink datarate. This should not be used when ADR is enabled.
Definition: LoRaWAN.cpp:1976
+int16_t setDatarate(uint8_t drUp)
Set uplink datarate. This should not be used when ADR is enabled.
Definition: LoRaWAN.cpp:1979
int16_t uplink(const char *str, uint8_t fPort, bool isConfirmed=false, LoRaWANEvent_t *event=NULL)
Send a message to the server.
Definition: LoRaWAN.cpp:896
RadioLibTime_t scanGuard
Rx window padding in milliseconds according to the spec, the Rx window must be at least enough time t...
Definition: LoRaWAN.h:886
void beginOTAA(uint64_t joinEUI, uint64_t devEUI, uint8_t *nwkKey, uint8_t *appKey)
Set the device credentials and activation configuration.
Definition: LoRaWAN.cpp:457
-uint8_t maxPayloadDwellTime()
Returns the maximum payload given the currently present dwell time limits. WARNING: the addition of M...
Definition: LoRaWAN.cpp:2059
-void setDutyCycle(bool enable=true, RadioLibTime_t msPerHour=0)
Toggle adherence to dutyCycle limits to on or off.
Definition: LoRaWAN.cpp:2017
-RadioLibTime_t timeUntilUplink()
Returns time in milliseconds until next uplink is available under dutyCycle limits.
Definition: LoRaWAN.cpp:2041
-void setDeviceStatus(uint8_t battLevel)
Set device status.
Definition: LoRaWAN.cpp:1664
-RadioLibTime_t dutyCycleInterval(RadioLibTime_t msPerHour, RadioLibTime_t airtime)
Calculate the minimum interval to adhere to a certain dutyCycle. This interval is based on the ToA of...
Definition: LoRaWAN.cpp:2031
-void setDwellTime(bool enable, RadioLibTime_t msPerUplink=0)
Toggle adherence to dwellTime limits to on or off.
Definition: LoRaWAN.cpp:2050
-uint32_t getAFCntDown()
Returns the last application downlink's frame counter; also 0 if no application downlink occured yet.
Definition: LoRaWAN.cpp:1680
-RadioLibTime_t getLastToA()
Get the Time-on-air of the last uplink message (in milliseconds).
Definition: LoRaWAN.cpp:2942
+uint8_t maxPayloadDwellTime()
Returns the maximum payload given the currently present dwell time limits. WARNING: the addition of M...
Definition: LoRaWAN.cpp:2062
+void setDutyCycle(bool enable=true, RadioLibTime_t msPerHour=0)
Toggle adherence to dutyCycle limits to on or off.
Definition: LoRaWAN.cpp:2020
+RadioLibTime_t timeUntilUplink()
Returns time in milliseconds until next uplink is available under dutyCycle limits.
Definition: LoRaWAN.cpp:2044
+void setDeviceStatus(uint8_t battLevel)
Set device status.
Definition: LoRaWAN.cpp:1667
+RadioLibTime_t dutyCycleInterval(RadioLibTime_t msPerHour, RadioLibTime_t airtime)
Calculate the minimum interval to adhere to a certain dutyCycle. This interval is based on the ToA of...
Definition: LoRaWAN.cpp:2034
+void setDwellTime(bool enable, RadioLibTime_t msPerUplink=0)
Toggle adherence to dwellTime limits to on or off.
Definition: LoRaWAN.cpp:2053
+uint32_t getAFCntDown()
Returns the last application downlink's frame counter; also 0 if no application downlink occured yet.
Definition: LoRaWAN.cpp:1683
+RadioLibTime_t getLastToA()
Get the Time-on-air of the last uplink message (in milliseconds).
Definition: LoRaWAN.cpp:2945
int16_t activateABP(uint8_t initialDr=RADIOLIB_LORAWAN_DATA_RATE_UNUSED)
Join network by restoring ABP session or performing over-the-air activation. In this procedure,...
Definition: LoRaWAN.cpp:827
bool TS009
TS009 Protocol Specification Verification switch (allows FPort 224 and cuts off uplink payload instea...
Definition: LoRaWAN.h:872
uint8_t * getBufferNonces()
Returns the pointer to the internal buffer that holds the LW base parameters.
Definition: LoRaWAN.cpp:77
-int16_t sendReceive(const char *strUp, uint8_t fPort, uint8_t *dataDown, size_t *lenDown, bool isConfirmed=false, LoRaWANEvent_t *eventUp=NULL, LoRaWANEvent_t *eventDown=NULL)
Send a message to the server and wait for a downlink during Rx1 and/or Rx2 window.
Definition: LoRaWAN.cpp:1644
+int16_t sendReceive(const char *strUp, uint8_t fPort, uint8_t *dataDown, size_t *lenDown, bool isConfirmed=false, LoRaWANEvent_t *eventUp=NULL, LoRaWANEvent_t *eventDown=NULL)
Send a message to the server and wait for a downlink during Rx1 and/or Rx2 window.
Definition: LoRaWAN.cpp:1647
uint8_t * getBufferSession()
Returns the pointer to the internal buffer that holds the LW session parameters.
Definition: LoRaWAN.cpp:121
void beginABP(uint32_t addr, uint8_t *fNwkSIntKey, uint8_t *sNwkSIntKey, uint8_t *nwkSEncKey, uint8_t *appSKey)
Set the device credentials and activation configuration.
Definition: LoRaWAN.cpp:797
bool isActivated()
Whether there is an ongoing session active.
Definition: LoRaWAN.cpp:886
-int16_t setTxPower(int8_t txPower)
Configure TX power of the radio module.
Definition: LoRaWAN.cpp:2080
-int16_t getMacDeviceTimeAns(uint32_t *gpsEpoch, uint8_t *fraction, bool returnUnix=true)
Returns the network time after requesting a DeviceTime MAC command. Returns 'true' if a network respo...
Definition: LoRaWAN.cpp:2921
-uint32_t getNFCntDown()
Returns the last network downlink's frame counter; also 0 if no network downlink occured yet.
Definition: LoRaWAN.cpp:1676
+int16_t setTxPower(int8_t txPower)
Configure TX power of the radio module.
Definition: LoRaWAN.cpp:2083
+int16_t getMacDeviceTimeAns(uint32_t *gpsEpoch, uint8_t *fraction, bool returnUnix=true)
Returns the network time after requesting a DeviceTime MAC command. Returns 'true' if a network respo...
Definition: LoRaWAN.cpp:2924
+uint32_t getNFCntDown()
Returns the last network downlink's frame counter; also 0 if no network downlink occured yet.
Definition: LoRaWAN.cpp:1679
int16_t downlink(uint8_t *data, size_t *len, LoRaWANEvent_t *event=NULL)
Wait for downlink from the server in either RX1 or RX2 window.
Definition: LoRaWAN.cpp:1326
int16_t setBufferSession(uint8_t *persistentBuffer)
Fill the internal buffer that holds the LW session parameters with a supplied buffer.
Definition: LoRaWAN.cpp:140
LoRaWANNode(PhysicalLayer *phy, const LoRaWANBand_t *band, uint8_t subBand=0)
Default constructor.
Definition: LoRaWAN.cpp:30
int16_t activateOTAA(uint8_t initialDr=RADIOLIB_LORAWAN_DATA_RATE_UNUSED, LoRaWANJoinEvent_t *joinEvent=NULL)
Join network by restoring OTAA session or performing over-the-air activation. By this procedure,...
Definition: LoRaWAN.cpp:484
-uint32_t getFCntUp()
Returns the last uplink's frame counter; also 0 if no uplink occured yet.
Definition: LoRaWAN.cpp:1669
-int16_t setRx2Dr(uint8_t dr)
Configure the Rx2 datarate for ABP mode. This should not be needed for LoRaWAN 1.1 as it is configure...
Definition: LoRaWAN.cpp:2144
-int16_t sendMacCommandReq(uint8_t cid)
Add a MAC command to the uplink queue. Only LinkCheck and DeviceTime are available to the user....
Definition: LoRaWAN.cpp:2171
-int16_t getMacLinkCheckAns(uint8_t *margin, uint8_t *gwCnt)
Returns the quality of connectivity after requesting a LinkCheck MAC command. Returns 'true' if a net...
Definition: LoRaWAN.cpp:2910
-void setADR(bool enable=true)
Toggle ADR to on or off.
Definition: LoRaWAN.cpp:2013
-uint32_t getDevAddr()
Returns the DevAddr of the device, regardless of OTAA or ABP mode.
Definition: LoRaWAN.cpp:2938
-void resetFCntDown()
Reset the downlink frame counters (application and network) This is unsafe and can possibly allow rep...
Definition: LoRaWAN.cpp:1684
+uint32_t getFCntUp()
Returns the last uplink's frame counter; also 0 if no uplink occured yet.
Definition: LoRaWAN.cpp:1672
+int16_t setRx2Dr(uint8_t dr)
Configure the Rx2 datarate for ABP mode. This should not be needed for LoRaWAN 1.1 as it is configure...
Definition: LoRaWAN.cpp:2147
+int16_t sendMacCommandReq(uint8_t cid)
Add a MAC command to the uplink queue. Only LinkCheck and DeviceTime are available to the user....
Definition: LoRaWAN.cpp:2174
+int16_t getMacLinkCheckAns(uint8_t *margin, uint8_t *gwCnt)
Returns the quality of connectivity after requesting a LinkCheck MAC command. Returns 'true' if a net...
Definition: LoRaWAN.cpp:2913
+void setADR(bool enable=true)
Toggle ADR to on or off.
Definition: LoRaWAN.cpp:2016
+uint32_t getDevAddr()
Returns the DevAddr of the device, regardless of OTAA or ABP mode.
Definition: LoRaWAN.cpp:2941
+void resetFCntDown()
Reset the downlink frame counters (application and network) This is unsafe and can possibly allow rep...
Definition: LoRaWAN.cpp:1687
Provides common interface for protocols that run on LoRa/FSK modules, such as RTTY or LoRaWAN....
Definition: PhysicalLayer.h:54
unsigned long RadioLibTime_t
Type used for durations in RadioLib.
Definition: TypeDef.h:616
Structure to save information about LoRaWAN band.
Definition: LoRaWAN.h:386