From 63ff787187e8862e111972379c7746f3e1452a57 Mon Sep 17 00:00:00 2001 From: jgromes Date: Sun, 2 Feb 2025 09:12:00 +0000 Subject: [PATCH] =?UTF-8?q?Deploying=20to=20gh-pages=20from=20=20@=209e832?= =?UTF-8?q?526a57e5fe946118a23fb87a905408cc2dd=20=F0=9F=9A=80?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- _s_x1278_8h_source.html | 2 +- class_s_x1276.html | 4 ++-- class_s_x1277.html | 4 ++-- class_s_x1278.html | 8 ++++---- class_s_x1279.html | 4 ++-- 5 files changed, 11 insertions(+), 11 deletions(-) diff --git a/_s_x1278_8h_source.html b/_s_x1278_8h_source.html index c0f0b899..bd8e2288 100644 --- a/_s_x1278_8h_source.html +++ b/_s_x1278_8h_source.html @@ -292,7 +292,7 @@ $(document).ready(function(){initNavTree('_s_x1278_8h_source.html',''); initResi
SX1278::setBandwidth
int16_t setBandwidth(float bw)
Sets LoRa link bandwidth. Allowed values are 7.8, 10.4, 15.6, 20.8, 31.25, 41.7, 62....
Definition SX1278.cpp:96
SX1278::implicitHeader
int16_t implicitHeader(size_t len)
Set implicit header mode for future reception/transmission. Required for spreading factor 6.
Definition SX1278.cpp:537
SX1278::setModem
int16_t setModem(ModemType_t modem) override
Set modem for the radio to use. Will perform full reset and reconfigure the radio using its default p...
Definition SX1278.cpp:691
-
SX1278::setOutputPower
int16_t setOutputPower(int8_t power) override
Sets transmission output power. Allowed values range from -3 to 15 dBm (RFO pin) or +2 to +17 dBm (PA...
Definition SX1278.cpp:292
+
SX1278::setOutputPower
int16_t setOutputPower(int8_t power) override
Sets transmission output power. Allowed values range from -4 to 15 dBm (RFO pin) or +2 to +17 dBm (PA...
Definition SX1278.cpp:292
SX1278::reset
void reset() override
Reset method. Will reset the chip to the default state using RST pin.
Definition SX1278.cpp:76
SX1278::forceLDRO
int16_t forceLDRO(bool enable)
Forces LoRa low data rate optimization. Only available in LoRa mode. After calling this method,...
Definition SX1278.cpp:514
SX1278::explicitHeader
int16_t explicitHeader()
Set explicit header mode for future reception/transmission.
Definition SX1278.cpp:542
diff --git a/class_s_x1276.html b/class_s_x1276.html index af504721..549d8c84 100644 --- a/class_s_x1276.html +++ b/class_s_x1276.html @@ -159,10 +159,10 @@ Public Member Functions  Check the data rate can be configured by this module.
  int16_t setOutputPower (int8_t power) override - Sets transmission output power. Allowed values range from -3 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin. Defaults to PA_BOOST.
+ Sets transmission output power. Allowed values range from -4 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin. Defaults to PA_BOOST.
  int16_t setOutputPower (int8_t power, bool useRfo) - Sets transmission output power. Allowed values range from -3 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin.
+ Sets transmission output power. Allowed values range from -4 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin.
  int16_t checkOutputPower (int8_t power, int8_t *clipped) override  Check if output power is configurable. This method is needed for compatibility with PhysicalLayer::checkOutputPower.
diff --git a/class_s_x1277.html b/class_s_x1277.html index f28f014d..777946cf 100644 --- a/class_s_x1277.html +++ b/class_s_x1277.html @@ -165,10 +165,10 @@ Public Member Functions  Check the data rate can be configured by this module.
  int16_t setOutputPower (int8_t power) override - Sets transmission output power. Allowed values range from -3 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin. Defaults to PA_BOOST.
+ Sets transmission output power. Allowed values range from -4 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin. Defaults to PA_BOOST.
  int16_t setOutputPower (int8_t power, bool useRfo) - Sets transmission output power. Allowed values range from -3 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin.
+ Sets transmission output power. Allowed values range from -4 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin.
  int16_t checkOutputPower (int8_t power, int8_t *clipped) override  Check if output power is configurable. This method is needed for compatibility with PhysicalLayer::checkOutputPower.
diff --git a/class_s_x1278.html b/class_s_x1278.html index a8f119be..056d605a 100644 --- a/class_s_x1278.html +++ b/class_s_x1278.html @@ -151,10 +151,10 @@ Public Member Functions  Check the data rate can be configured by this module.
  int16_t setOutputPower (int8_t power) override - Sets transmission output power. Allowed values range from -3 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin. Defaults to PA_BOOST.
+ Sets transmission output power. Allowed values range from -4 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin. Defaults to PA_BOOST.
  int16_t setOutputPower (int8_t power, bool useRfo) - Sets transmission output power. Allowed values range from -3 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin.
+ Sets transmission output power. Allowed values range from -4 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin.
  int16_t checkOutputPower (int8_t power, int8_t *clipped) override  Check if output power is configurable. This method is needed for compatibility with PhysicalLayer::checkOutputPower.
@@ -1429,7 +1429,7 @@ void dropSync ()<
-

Sets transmission output power. Allowed values range from -3 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin. Defaults to PA_BOOST.

+

Sets transmission output power. Allowed values range from -4 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin. Defaults to PA_BOOST.

Parameters
@@ -1468,7 +1468,7 @@ void <
powerTransmission output power in dBm.
dropSync ()
-

Sets transmission output power. Allowed values range from -3 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin.

+

Sets transmission output power. Allowed values range from -4 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin.

Parameters
diff --git a/class_s_x1279.html b/class_s_x1279.html index 5c60cec1..a6a16a87 100644 --- a/class_s_x1279.html +++ b/class_s_x1279.html @@ -156,10 +156,10 @@ Public Member Functions - + - +
powerTransmission output power in dBm.
 Check the data rate can be configured by this module.
 
int16_t setOutputPower (int8_t power) override
 Sets transmission output power. Allowed values range from -3 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin. Defaults to PA_BOOST.
 Sets transmission output power. Allowed values range from -4 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin. Defaults to PA_BOOST.
 
int16_t setOutputPower (int8_t power, bool useRfo)
 Sets transmission output power. Allowed values range from -3 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin.
 Sets transmission output power. Allowed values range from -4 to 15 dBm (RFO pin) or +2 to +17 dBm (PA_BOOST pin). High power +20 dBm operation is also supported, on the PA_BOOST pin.
 
int16_t checkOutputPower (int8_t power, int8_t *clipped) override
 Check if output power is configurable. This method is needed for compatibility with PhysicalLayer::checkOutputPower.