From 62c46ba94ee2f89a428b4113c86f1ee01ed02fe2 Mon Sep 17 00:00:00 2001 From: jgromes Date: Sun, 14 Apr 2024 18:30:16 +0000 Subject: [PATCH] =?UTF-8?q?Deploying=20to=20gh-pages=20from=20=20@=207bb74?= =?UTF-8?q?7fdba54718d70ab2ca48f604a8d4a278d25=20=F0=9F=9A=80?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- _l_r11x0_8h_source.html | 56 ++++++++++++++++++++--------------------- 1 file changed, 28 insertions(+), 28 deletions(-) diff --git a/_l_r11x0_8h_source.html b/_l_r11x0_8h_source.html index 7d156f09..5a6ab33c 100644 --- a/_l_r11x0_8h_source.html +++ b/_l_r11x0_8h_source.html @@ -896,39 +896,39 @@ $(document).ready(function(){initNavTree('_l_r11x0_8h_source.html',''); initResi
1017 
1018 #endif
LR11x0
Definition: LR11x0.h:542
-
LR11x0::getIrqStatus
uint32_t getIrqStatus()
Reads the current IRQ status.
Definition: LR11x0.cpp:424
-
LR11x0::setPacketReceivedAction
void setPacketReceivedAction(void(*func)(void))
Sets interrupt service routine to call when a packet is received.
Definition: LR11x0.cpp:301
-
LR11x0::getDataRate
float getDataRate() const
Gets effective data rate for the last transmitted packet. The value is calculated only for payload by...
Definition: LR11x0.cpp:786
-
LR11x0::reset
int16_t reset()
Reset method. Will reset the chip to the default state using RST pin.
Definition: LR11x0.cpp:115
-
LR11x0::clearDio1Action
void clearDio1Action()
Clears interrupt service routine to call when DIO1 activates.
Definition: LR11x0.cpp:297
-
LR11x0::getTimeOnAir
uint32_t getTimeOnAir(size_t len) override
Get expected time-on-air for a given size of payload.
Definition: LR11x0.cpp:720
+
LR11x0::getIrqStatus
uint32_t getIrqStatus()
Reads the current IRQ status.
Definition: LR11x0.cpp:433
+
LR11x0::setPacketReceivedAction
void setPacketReceivedAction(void(*func)(void))
Sets interrupt service routine to call when a packet is received.
Definition: LR11x0.cpp:310
+
LR11x0::getDataRate
float getDataRate() const
Gets effective data rate for the last transmitted packet. The value is calculated only for payload by...
Definition: LR11x0.cpp:803
+
LR11x0::reset
int16_t reset()
Reset method. Will reset the chip to the default state using RST pin.
Definition: LR11x0.cpp:123
+
LR11x0::clearDio1Action
void clearDio1Action()
Clears interrupt service routine to call when DIO1 activates.
Definition: LR11x0.cpp:306
+
LR11x0::getTimeOnAir
uint32_t getTimeOnAir(size_t len) override
Get expected time-on-air for a given size of payload.
Definition: LR11x0.cpp:737
LR11x0::readData
virtual int16_t readData(uint8_t *data, size_t len)
Reads data that was received after calling startReceive method.
Definition: PhysicalLayer.cpp:209
LR11x0::XTAL
bool XTAL
Whether the module has an XTAL (true) or TCXO (false). Defaults to false.
Definition: LR11x0.h:559
-
LR11x0::getRSSI
float getRSSI()
Gets RSSI (Recorded Signal Strength Indicator) of the last received packet. Only available for LoRa o...
Definition: LR11x0.cpp:666
+
LR11x0::getRSSI
float getRSSI()
Gets RSSI (Recorded Signal Strength Indicator) of the last received packet. Only available for LoRa o...
Definition: LR11x0.cpp:683
LR11x0::transmit
int16_t transmit(const char *str, uint8_t addr=0)
C-string transmit method.
Definition: PhysicalLayer.cpp:52
-
LR11x0::LR11x0
LR11x0(Module *mod)
Default constructor.
Definition: LR11x0.cpp:10
-
LR11x0::setCodingRate
int16_t setCodingRate(uint8_t cr, bool longInterleave=false)
Sets LoRa coding rate denominator. Allowed values range from 5 to 8.
Definition: LR11x0.cpp:534
-
LR11x0::clearPacketReceivedAction
void clearPacketReceivedAction()
Clears interrupt service routine to call when a packet is received.
Definition: LR11x0.cpp:305
-
LR11x0::standby
int16_t standby() override
Sets the module to standby mode (overload for PhysicalLayer compatibility, uses 13 MHz RC oscillator)...
Definition: LR11x0.cpp:254
-
LR11x0::setPacketSentAction
void setPacketSentAction(void(*func)(void))
Sets interrupt service routine to call when a packet is sent.
Definition: LR11x0.cpp:309
-
LR11x0::begin
int16_t begin(float bw, uint8_t sf, uint8_t cr, uint8_t syncWord, uint16_t preambleLength, float tcxoVoltage)
Initialization method for LoRa modem.
Definition: LR11x0.cpp:15
+
LR11x0::LR11x0
LR11x0(Module *mod)
Default constructor.
Definition: LR11x0.cpp:11
+
LR11x0::setCodingRate
int16_t setCodingRate(uint8_t cr, bool longInterleave=false)
Sets LoRa coding rate denominator. Allowed values range from 5 to 8.
Definition: LR11x0.cpp:543
+
LR11x0::clearPacketReceivedAction
void clearPacketReceivedAction()
Clears interrupt service routine to call when a packet is received.
Definition: LR11x0.cpp:314
+
LR11x0::standby
int16_t standby() override
Sets the module to standby mode (overload for PhysicalLayer compatibility, uses 13 MHz RC oscillator)...
Definition: LR11x0.cpp:262
+
LR11x0::setPacketSentAction
void setPacketSentAction(void(*func)(void))
Sets interrupt service routine to call when a packet is sent.
Definition: LR11x0.cpp:318
+
LR11x0::begin
int16_t begin(float bw, uint8_t sf, uint8_t cr, uint8_t syncWord, uint16_t preambleLength, float tcxoVoltage)
Initialization method for LoRa modem.
Definition: LR11x0.cpp:16
LR11x0::startTransmit
int16_t startTransmit(const char *str, uint8_t addr=0)
Interrupt-driven Arduino String transmit method. Unlike the standard transmit method,...
Definition: PhysicalLayer.cpp:149
-
LR11x0::setTCXO
int16_t setTCXO(float voltage, uint32_t delay=5000)
Sets TCXO (Temperature Compensated Crystal Oscillator) configuration.
Definition: LR11x0.cpp:584
-
LR11x0::setDio1Action
void setDio1Action(void(*func)(void))
Sets interrupt service routine to call when DIO1 activates.
Definition: LR11x0.cpp:293
-
LR11x0::setPreambleLength
int16_t setPreambleLength(size_t preambleLength) override
Sets preamble length for LoRa or FSK modem. Allowed values range from 1 to 65535.
Definition: LR11x0.cpp:571
-
LR11x0::startReceive
int16_t startReceive()
Interrupt-driven receive method with default parameters. Implemented for compatibility with PhysicalL...
Definition: LR11x0.cpp:380
-
LR11x0::finishTransmit
int16_t finishTransmit() override
Clean up after transmission is done.
Definition: LR11x0.cpp:372
+
LR11x0::setTCXO
int16_t setTCXO(float voltage, uint32_t delay=5000)
Sets TCXO (Temperature Compensated Crystal Oscillator) configuration.
Definition: LR11x0.cpp:593
+
LR11x0::setDio1Action
void setDio1Action(void(*func)(void))
Sets interrupt service routine to call when DIO1 activates.
Definition: LR11x0.cpp:302
+
LR11x0::setPreambleLength
int16_t setPreambleLength(size_t preambleLength) override
Sets preamble length for LoRa or FSK modem. Allowed values range from 1 to 65535.
Definition: LR11x0.cpp:580
+
LR11x0::startReceive
int16_t startReceive()
Interrupt-driven receive method with default parameters. Implemented for compatibility with PhysicalL...
Definition: LR11x0.cpp:389
+
LR11x0::finishTransmit
int16_t finishTransmit() override
Clean up after transmission is done.
Definition: LR11x0.cpp:381
LR11x0::receive
virtual int16_t receive(uint8_t *data, size_t len)
Binary receive method. Must be implemented in module class.
Definition: PhysicalLayer.cpp:112
-
LR11x0::beginGFSK
int16_t beginGFSK(float br, float freqDev, float rxBw, uint16_t preambleLength, float tcxoVoltage)
Initialization method for FSK modem.
Definition: LR11x0.cpp:83
-
LR11x0::setBandwidth
int16_t setBandwidth(float bw)
Sets LoRa bandwidth. Allowed values are 62.5, 125.0, 250.0 and 500.0 kHz.
Definition: LR11x0.cpp:477
-
LR11x0::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: LR11x0.cpp:701
-
LR11x0::clearPacketSentAction
void clearPacketSentAction()
Clears interrupt service routine to call when a packet is sent.
Definition: LR11x0.cpp:313
-
LR11x0::setCRC
int16_t setCRC(uint8_t len, uint16_t initial=0x1D0F, uint16_t polynomial=0x1021, bool inverted=true)
Sets CRC configuration.
Definition: LR11x0.cpp:639
-
LR11x0::getSNR
float getSNR()
Gets SNR (Signal to Noise Ratio) of the last received packet. Only available for LoRa modem.
Definition: LR11x0.cpp:683
-
LR11x0::getFrequencyError
float getFrequencyError()
Gets frequency error of the latest received packet.
Definition: LR11x0.cpp:696
-
LR11x0::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf, bool legacy=false)
Sets LoRa spreading factor. Allowed values range from 5 to 12.
Definition: LR11x0.cpp:513
-
LR11x0::setSyncWord
int16_t setSyncWord(uint8_t syncWord)
Sets LoRa sync word.
Definition: LR11x0.cpp:567
-
LR11x0::invertIQ
int16_t invertIQ(bool enable) override
Enable/disable inversion of the I and Q signals.
Definition: LR11x0.cpp:653
+
LR11x0::beginGFSK
int16_t beginGFSK(float br, float freqDev, float rxBw, uint16_t preambleLength, float tcxoVoltage)
Initialization method for FSK modem.
Definition: LR11x0.cpp:84
+
LR11x0::setBandwidth
int16_t setBandwidth(float bw)
Sets LoRa bandwidth. Allowed values are 62.5, 125.0, 250.0 and 500.0 kHz.
Definition: LR11x0.cpp:486
+
LR11x0::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: LR11x0.cpp:718
+
LR11x0::clearPacketSentAction
void clearPacketSentAction()
Clears interrupt service routine to call when a packet is sent.
Definition: LR11x0.cpp:322
+
LR11x0::setCRC
int16_t setCRC(uint8_t len, uint16_t initial=0x1D0F, uint16_t polynomial=0x1021, bool inverted=true)
Sets CRC configuration.
Definition: LR11x0.cpp:648
+
LR11x0::getSNR
float getSNR()
Gets SNR (Signal to Noise Ratio) of the last received packet. Only available for LoRa modem.
Definition: LR11x0.cpp:700
+
LR11x0::getFrequencyError
float getFrequencyError()
Gets frequency error of the latest received packet.
Definition: LR11x0.cpp:713
+
LR11x0::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf, bool legacy=false)
Sets LoRa spreading factor. Allowed values range from 5 to 12.
Definition: LR11x0.cpp:522
+
LR11x0::setSyncWord
int16_t setSyncWord(uint8_t syncWord)
Sets LoRa sync word.
Definition: LR11x0.cpp:576
+
LR11x0::invertIQ
int16_t invertIQ(bool enable) override
Enable/disable inversion of the I and Q signals.
Definition: LR11x0.cpp:670
Module
Implements all common low-level methods to control the wireless module. Every module class contains o...
Definition: Module.h:68
PhysicalLayer
Provides common interface for protocols that run on LoRa/FSK modules, such as RTTY or LoRaWAN....
Definition: PhysicalLayer.h:54
PhysicalLayer::readData
virtual int16_t readData(uint8_t *data, size_t len)
Reads data that was received after calling startReceive method.
Definition: PhysicalLayer.cpp:209