diff --git a/_c_c1101_8h_source.html b/_c_c1101_8h_source.html
index 344841ef..b5fee1ba 100644
--- a/_c_c1101_8h_source.html
+++ b/_c_c1101_8h_source.html
@@ -800,59 +800,59 @@ $(document).ready(function(){initNavTree('_c_c1101_8h_source.html',''); initResi
Control class for CC1101 module.
Definition: CC1101.h:530
void clearPacketReceivedAction() override
Clears interrupt service routine to call when a packet is received.
Definition: CC1101.cpp:265
int16_t setFrequencyDeviation(float freqDev) override
Sets frequency deviation. Allowed values range from 1.587 to 380.8 kHz.
Definition: CC1101.cpp:510
-void readBit(uint32_t pin) override
Function to read and process data bit in direct reception mode.
Definition: CC1101.cpp:1002
-size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: CC1101.cpp:820
-uint8_t randomByte() override
Get one truly random byte from RSSI noise.
Definition: CC1101.cpp:974
+void readBit(uint32_t pin) override
Function to read and process data bit in direct reception mode.
Definition: CC1101.cpp:981
+size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: CC1101.cpp:799
+uint8_t randomByte() override
Get one truly random byte from RSSI noise.
Definition: CC1101.cpp:953
void reset()
Reset method - resets the chip using manual reset sequence (without RESET pin).
Definition: CC1101.cpp:90
int16_t transmitDirect(uint32_t frf=0) override
Starts synchronous direct mode transmission.
Definition: CC1101.cpp:194
-void setDirectAction(void(*func)(void)) override
Set interrupt service routine function to call when data bit is receveid in direct mode.
Definition: CC1101.cpp:998
+void setDirectAction(void(*func)(void)) override
Set interrupt service routine function to call when data bit is receveid in direct mode.
Definition: CC1101.cpp:977
void clearPacketSentAction() override
Clears interrupt service routine to call when a packet is sent.
Definition: CC1101.cpp:273
void setPacketReceivedAction(void(*func)(void)) override
Sets interrupt service routine to call when a packet is received.
Definition: CC1101.cpp:261
-int16_t getChipVersion()
Read version SPI register. Should return CC1101_VERSION_LEGACY (0x04) or CC1101_VERSION_CURRENT (0x14...
Definition: CC1101.cpp:993
+int16_t getChipVersion()
Read version SPI register. Should return CC1101_VERSION_LEGACY (0x04) or CC1101_VERSION_CURRENT (0x14...
Definition: CC1101.cpp:972
void setPacketSentAction(void(*func)(void)) override
Sets interrupt service routine to call when a packet is sent.
Definition: CC1101.cpp:269
virtual int16_t readData(uint8_t *data, size_t len)
Reads data that was received after calling startReceive method.
Definition: PhysicalLayer.cpp:209
int16_t setRxBandwidth(float rxBw)
Sets receiver bandwidth. Allowed values are 58, 68, 81, 102, 116, 135, 162, 203, 232,...
Definition: CC1101.cpp:471
int16_t packetMode()
Stops direct mode. It is required to call this method to switch from direct transmissions to packet-b...
Definition: CC1101.cpp:246
-int16_t setSyncWord(uint8_t syncH, uint8_t syncL, uint8_t maxErrBits=0, bool requireCarrierSense=false)
Sets 16-bit sync word as a two byte value.
Definition: CC1101.cpp:699
+int16_t setSyncWord(uint8_t syncH, uint8_t syncL, uint8_t maxErrBits=0, bool requireCarrierSense=false)
Sets 16-bit sync word as a two byte value.
Definition: CC1101.cpp:678
int16_t autoSetRxBandwidth()
calculates and sets Rx bandwidth based on the freq, baud and freq uncertainty. Reimplement of atlas0f...
Definition: CC1101.cpp:492
int16_t transmit(const char *str, uint8_t addr=0)
C-string transmit method.
Definition: PhysicalLayer.cpp:52
-int16_t disableSyncWordFiltering(bool requireCarrierSense=false)
Disable preamble and sync word filtering and generation.
Definition: CC1101.cpp:867
-int16_t variablePacketLengthMode(uint8_t maxLen=RADIOLIB_CC1101_MAX_PACKET_LENGTH)
Set modem in variable packet length mode.
Definition: CC1101.cpp:844
-int16_t setDIOMapping(uint32_t pin, uint32_t value) override
Configure DIO pin mapping to get a given signal on a DIO pin (if available).
Definition: CC1101.cpp:1007
-uint8_t getLQI() const
Gets LQI (Link Quality Indicator) of the last received packet.
Definition: CC1101.cpp:816
+int16_t disableSyncWordFiltering(bool requireCarrierSense=false)
Disable preamble and sync word filtering and generation.
Definition: CC1101.cpp:846
+int16_t variablePacketLengthMode(uint8_t maxLen=RADIOLIB_CC1101_MAX_PACKET_LENGTH)
Set modem in variable packet length mode.
Definition: CC1101.cpp:823
+int16_t setDIOMapping(uint32_t pin, uint32_t value) override
Configure DIO pin mapping to get a given signal on a DIO pin (if available).
Definition: CC1101.cpp:986
+uint8_t getLQI() const
Gets LQI (Link Quality Indicator) of the last received packet.
Definition: CC1101.cpp:795
int16_t setOutputPower(int8_t pwr) override
Sets output power. Allowed values are -30, -20, -15, -10, 0, 5, 7 or 10 dBm.
Definition: CC1101.cpp:562
-void setRfSwitchPins(uint32_t rxEn, uint32_t txEn)
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: CC1101.cpp:966
-int16_t setCrcFiltering(bool enable=true)
Enable CRC filtering and generation.
Definition: CC1101.cpp:872
+void setRfSwitchPins(uint32_t rxEn, uint32_t txEn)
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: CC1101.cpp:945
+int16_t setCrcFiltering(bool enable=true)
Enable CRC filtering and generation.
Definition: CC1101.cpp:851
CC1101(Module *module)
Default constructor.
Definition: CC1101.cpp:5
-int16_t setNodeAddress(uint8_t nodeAddr, uint8_t numBroadcastAddrs=0)
Sets node and broadcast addresses. Calling this method will also enable address filtering.
Definition: CC1101.cpp:746
+int16_t setNodeAddress(uint8_t nodeAddr, uint8_t numBroadcastAddrs=0)
Sets node and broadcast addresses. Calling this method will also enable address filtering.
Definition: CC1101.cpp:725
int16_t setBitRate(float br) override
Sets bit rate. Allowed values range from 0.025 to 600.0 kbps.
Definition: CC1101.cpp:451
-int16_t enableSyncWordFiltering(uint8_t maxErrBits=0, bool requireCarrierSense=false)
Enable sync word filtering and generation.
Definition: CC1101.cpp:848
+int16_t enableSyncWordFiltering(uint8_t maxErrBits=0, bool requireCarrierSense=false)
Enable sync word filtering and generation.
Definition: CC1101.cpp:827
int16_t standby() override
Sets the module to standby mode.
Definition: CC1101.cpp:170
-void setRfSwitchTable(const uint32_t(&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[])
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: CC1101.cpp:970
+void setRfSwitchTable(const uint32_t(&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[])
Some modules contain external RF switch controlled by pins. This function gives RadioLib control over...
Definition: CC1101.cpp:949
int16_t startTransmit(const char *str, uint8_t addr=0)
Interrupt-driven Arduino String transmit method. Unlike the standard transmit method,...
Definition: PhysicalLayer.cpp:149
-int16_t disableAddressFiltering()
Disables address filtering. Calling this method will also erase previously set addresses.
Definition: CC1101.cpp:757
+int16_t disableAddressFiltering()
Disables address filtering. Calling this method will also erase previously set addresses.
Definition: CC1101.cpp:736
void setGdo0Action(void(*func)(void), uint32_t dir)
Sets interrupt service routine to call when GDO0 activates.
Definition: CC1101.cpp:253
int16_t receiveDirectAsync()
Starts asynchronous direct mode reception.
Definition: CC1101.cpp:229
int16_t receiveDirect() override
Starts synchronous direct mode reception.
Definition: CC1101.cpp:225
-int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Allowed values are RADIOLIB_ENCODING_NRZ, RADIOLIB_ENCODING_MANCHESTER,...
Definition: CC1101.cpp:942
+int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Allowed values are RADIOLIB_ENCODING_NRZ, RADIOLIB_ENCODING_MANCHESTER,...
Definition: CC1101.cpp:921
int16_t checkOutputPower(int8_t power, int8_t *clipped) override
Check if output power is configurable. This method is needed for compatibility with PhysicalLayer::ch...
Definition: CC1101.cpp:587
void clearGdo0Action()
Clears interrupt service routine to call when GDO0 activates.
Definition: CC1101.cpp:257
-float getRSSI() override
Gets RSSI (Recorded Signal Strength Indicator) of the last received packet. In asynchronous direct mo...
Definition: CC1101.cpp:796
+float getRSSI() override
Gets RSSI (Recorded Signal Strength Indicator) of the last received packet. In asynchronous direct mo...
Definition: CC1101.cpp:775
virtual int16_t receive(uint8_t *data, size_t len)
Binary receive method. Must be implemented in module class.
Definition: PhysicalLayer.cpp:112
int16_t getFrequencyDeviation(float *freqDev)
Gets frequency deviation.
Definition: CC1101.cpp:537
-int16_t setPromiscuousMode(bool enable=true, bool requireCarrierSense=false)
Set modem in "sniff" mode: no packet filtering (e.g., no preamble, sync word, address,...
Definition: CC1101.cpp:882
+int16_t setPromiscuousMode(bool enable=true, bool requireCarrierSense=false)
Set modem in "sniff" mode: no packet filtering (e.g., no preamble, sync word, address,...
Definition: CC1101.cpp:861
void clearGdo2Action()
Clears interrupt service routine to call when GDO0 activates.
Definition: CC1101.cpp:285
-int16_t fixedPacketLengthMode(uint8_t len=RADIOLIB_CC1101_MAX_PACKET_LENGTH)
Set modem in fixed packet length mode.
Definition: CC1101.cpp:834
+int16_t fixedPacketLengthMode(uint8_t len=RADIOLIB_CC1101_MAX_PACKET_LENGTH)
Set modem in fixed packet length mode.
Definition: CC1101.cpp:813
int16_t setFrequency(float freq) override
Sets carrier frequency. Allowed values are in bands 300.0 to 348.0 MHz, 387.0 to 464....
Definition: CC1101.cpp:425
void setGdo2Action(void(*func)(void), uint32_t dir)
Sets interrupt service routine to call when GDO2 activates.
Definition: CC1101.cpp:277
int16_t begin(float freq=RADIOLIB_CC1101_DEFAULT_FREQ, float br=RADIOLIB_CC1101_DEFAULT_BR, float freqDev=RADIOLIB_CC1101_DEFAULT_FREQDEV, float rxBw=RADIOLIB_CC1101_DEFAULT_RXBW, int8_t pwr=RADIOLIB_CC1101_DEFAULT_POWER, uint8_t preambleLength=RADIOLIB_CC1101_DEFAULT_PREAMBLELEN)
Initialization method.
Definition: CC1101.cpp:9
-int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Allowed value is RADI...
Definition: CC1101.cpp:923
+int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Allowed value is RADI...
Definition: CC1101.cpp:902
int16_t startReceive() override
Interrupt-driven receive method. GDO0 will be activated when full packet is received.
Definition: CC1101.cpp:342
-int16_t setPreambleLength(uint8_t preambleLength, uint8_t qualityThreshold)
Sets preamble length.
Definition: CC1101.cpp:704
-bool getPromiscuousMode()
Get whether the modem is in promiscuous mode: no packet filtering (e.g., no preamble,...
Definition: CC1101.cpp:919
+int16_t setPreambleLength(uint8_t preambleLength, uint8_t qualityThreshold)
Sets preamble length.
Definition: CC1101.cpp:683
+bool getPromiscuousMode()
Get whether the modem is in promiscuous mode: no packet filtering (e.g., no preamble,...
Definition: CC1101.cpp:898
int16_t transmitDirectAsync(uint32_t frf=0)
Starts asynchronous direct mode transmission.
Definition: CC1101.cpp:198
int16_t finishTransmit() override
Clean up after transmission is done.
Definition: CC1101.cpp:331
-int16_t setOOK(bool enableOOK)
Enables/disables OOK modulation instead of FSK.
Definition: CC1101.cpp:767
+int16_t setOOK(bool enableOOK)
Enables/disables OOK modulation instead of FSK.
Definition: CC1101.cpp:746
Implements all common low-level methods to control the wireless module. Every module class contains o...
Definition: Module.h:65
static const size_t RFSWITCH_MAX_PINS
The maximum number of pins supported by the RF switch code. Note: It is not recommended to use this c...
Definition: Module.h:74
Provides common interface for protocols that run on LoRa/FSK modules, such as RTTY or LoRaWAN....
Definition: PhysicalLayer.h:54