[SX126x] Add LR-FHSS interrupt transmit example

examples/SX126x/SX126x_LR_FHSS_Transmit_Interrupt/SX126x_LR_FHSS_Transmit_Interrupt.ino

@@ -0,0 +1,151 @@
+/*
+  RadioLib SX126x LR-FHSS Transmit with Interrupts Example
+
+  This example shows how to use LR-FHSS modem in SX126x chips.
+  This modem can only transmit data, and is not able to receive.
+
+  This example transmits packets using SX1262 LoRa radio module.
+  Each packet contains up to 256 bytes of data, in the form of:
+  - Arduino String
+  - null-terminated char array (C-string)
+  - arbitrary binary data (byte array)
+
+  Other modules from SX126x family can also be used.
+
+  For default module settings, see the wiki page
+  https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lr-fhss-modem
+
+  For full API reference, see the GitHub Pages
+  https://jgromes.github.io/RadioLib/
+*/
+
+// include the library
+#include <RadioLib.h>
+
+// SX1262 has the following connections:
+// NSS pin:   10
+// IRQ pin:   2
+// NRST pin:  3
+// BUSY pin:  9
+SX1262 radio = new Module(10, 2, 3, 9);
+
+// or detect the pinout automatically using RadioBoards
+// https://github.com/radiolib-org/RadioBoards
+/*
+#define RADIO_BOARD_AUTO
+#include <RadioBoards.h>
+Radio radio = new RadioModule();
+*/
+
+// save transmission state between loops
+int transmissionState = RADIOLIB_ERR_NONE;
+
+// flag to indicate that a packet was sent
+// or a frequency hop is needed
+volatile bool flag = false;
+
+// this function is called when a complete packet
+// is transmitted by the module
+// IMPORTANT: this function MUST be 'void' type
+//            and MUST NOT have any arguments!
+#if defined(ESP8266) || defined(ESP32)
+  ICACHE_RAM_ATTR
+#endif
+void setFlag(void) {
+  // we sent a packet or need to hop, set the flag
+  flag = true;
+}
+
+void setup() {
+  Serial.begin(9600);
+
+  // initialize SX1262 with default settings
+  Serial.print(F("[SX1262] Initializing ... "));
+  int state = radio.beginLRFHSS();
+  if (state == RADIOLIB_ERR_NONE) {
+    Serial.println(F("success!"));
+  } else {
+    Serial.print(F("failed, code "));
+    Serial.println(state);
+    while (true) { delay(10); }
+  }
+
+  // set the function that will be called
+  // when packet transmission is finished
+  radio.setPacketSentAction(setFlag);
+
+  // start transmitting the first packet
+  Serial.print(F("[SX1262] Sending first packet ... "));
+
+  // you can transmit C-string or Arduino string up to
+  // 256 characters long
+  transmissionState = radio.startTransmit("Hello World!");
+
+  // you can also transmit byte array up to 256 bytes long
+  /*
+    byte byteArr[] = {0x01, 0x23, 0x45, 0x67,
+                      0x89, 0xAB, 0xCD, 0xEF};
+    state = radio.startTransmit(byteArr, 8);
+  */
+}
+
+// counter to keep track of transmitted packets
+int count = 0;
+
+void loop() {
+  // LR-FHSS modem can only transmit!
+
+  // check if the previous transmission finished
+  if(flag) {
+    // reset flag
+    flag = false;
+
+    // check if this was caused by hopping or transmission finished
+    if(radio.getIrqFlags() & RADIOLIB_SX126X_IRQ_LR_FHSS_HOP) {
+      radio.hopLRFHSS();
+    
+    } else {
+      if (transmissionState == RADIOLIB_ERR_NONE) {
+        // packet was successfully sent
+        Serial.println(F("transmission finished!"));
+  
+        // NOTE: when using interrupt-driven transmit method,
+        //       it is not possible to automatically measure
+        //       transmission data rate using getDataRate()
+  
+      } else {
+        Serial.print(F("failed, code "));
+        Serial.println(transmissionState);
+  
+      }
+  
+      // clean up after transmission is finished
+      // this will ensure transmitter is disabled,
+      // RF switch is powered down etc.
+      radio.finishTransmit();
+  
+      // wait a second before transmitting again
+      delay(1000);
+  
+      // send another one
+      Serial.print(F("[SX1262] Sending another packet ... "));
+  
+      // you can transmit C-string or Arduino string up to
+      // 256 characters long
+      String str = "Hello World! #" + String(count++);
+      transmissionState = radio.startTransmit(str);
+  
+      // you can also transmit byte array up to 256 bytes long
+      /*
+        byte byteArr[] = {0x01, 0x23, 0x45, 0x67,
+                          0x89, 0xAB, 0xCD, 0xEF};
+        transmissionState = radio.startTransmit(byteArr, 8);
+      */
+      
+    }
+
+    
+
+  }
+
+}