forks/RadioLibSmol
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

[nRF24] Added Module overrides for all Arduino core functions

Browse source
This commit is contained in:
jgromes 2020-08-01 16:35:11 +02:00
parent 123b2f507f
commit 3bbe84a899
1 changed files with 20 additions and 20 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

40
src/modules/nRF24/nRF24.cpp
View file

@ -16,7 +16,7 @@ int16_t nRF24::begin(int16_t freq, int16_t dataRate, int8_t power, uint8_t addrW
Module::digitalWrite(_mod->getRst(), LOW);
// wait for minimum power-on reset duration
delay(100);
Module::delay(100);
// check SPI connection
int16_t val = _mod->SPIgetRegValue(NRF24_REG_SETUP_AW);
@ -69,7 +69,7 @@ int16_t nRF24::standby() {
// make sure carrier output is disabled
_mod->SPIsetRegValue(NRF24_REG_RF_SETUP, NRF24_CONT_WAVE_OFF, 7, 7);
_mod->SPIsetRegValue(NRF24_REG_RF_SETUP, NRF24_PLL_LOCK_OFF, 4, 4);
digitalWrite(_mod->getRst(), LOW);
Module::digitalWrite(_mod->getRst(), LOW);
// use standby-1 mode
return(_mod->SPIsetRegValue(NRF24_REG_CONFIG, NRF24_POWER_UP, 1, 1));
@ -81,9 +81,9 @@ int16_t nRF24::transmit(uint8_t* data, size_t len, uint8_t addr) {
RADIOLIB_ASSERT(state);
// wait until transmission is finished
uint32_t start = micros();
while(digitalRead(_mod->getIrq())) {
yield();
uint32_t start = Module::micros();
while(Module::digitalRead(_mod->getIrq())) {
Module::yield();
// check maximum number of retransmits
if(getStatus(NRF24_MAX_RT)) {
@ -93,7 +93,7 @@ int16_t nRF24::transmit(uint8_t* data, size_t len, uint8_t addr) {
}
// check timeout: 15 retries * 4ms (max Tx time as per datasheet)
if(micros() - start >= 60000) {
if(Module::micros() - start >= 60000) {
standby();
clearIRQ();
return(ERR_TX_TIMEOUT);
@ -112,12 +112,12 @@ int16_t nRF24::receive(uint8_t* data, size_t len) {
RADIOLIB_ASSERT(state);
// wait for Rx_DataReady or timeout
uint32_t start = micros();
while(digitalRead(_mod->getIrq())) {
yield();
uint32_t start = Module::micros();
while(Module::digitalRead(_mod->getIrq())) {
Module::yield();
// check timeout: 15 retries * 4ms (max Tx time as per datasheet)
if(micros() - start >= 60000) {
if(Module::micros() - start >= 60000) {
standby();
clearIRQ();
return(ERR_RX_TIMEOUT);
@ -139,7 +139,7 @@ int16_t nRF24::transmitDirect(uint32_t frf) {
int16_t state = _mod->SPIsetRegValue(NRF24_REG_CONFIG, NRF24_PTX, 0, 0);
state |= _mod->SPIsetRegValue(NRF24_REG_RF_SETUP, NRF24_CONT_WAVE_ON, 7, 7);
state |= _mod->SPIsetRegValue(NRF24_REG_RF_SETUP, NRF24_PLL_LOCK_ON, 4, 4);
digitalWrite(_mod->getRst(), HIGH);
Module::digitalWrite(_mod->getRst(), HIGH);
return(state);
}
@ -150,7 +150,7 @@ int16_t nRF24::receiveDirect() {
}
void nRF24::setIrqAction(void (*func)(void)) {
attachInterrupt(RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(_mod->getIrq()), func, FALLING);
Module::attachInterrupt(RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(_mod->getIrq()), func, FALLING);
}
int16_t nRF24::startTransmit(uint8_t* data, size_t len, uint8_t addr) {
@ -186,9 +186,9 @@ int16_t nRF24::startTransmit(uint8_t* data, size_t len, uint8_t addr) {
SPIwriteTxPayload(data, len);
// CE high to start transmitting
digitalWrite(_mod->getRst(), HIGH);
delay(1);
digitalWrite(_mod->getRst(), LOW);
Module::digitalWrite(_mod->getRst(), HIGH);
Module::delay(1);
Module::digitalWrite(_mod->getRst(), LOW);
return(state);
}
@ -211,10 +211,10 @@ int16_t nRF24::startReceive() {
SPItransfer(NRF24_CMD_FLUSH_RX);
// CE high to start receiving
digitalWrite(_mod->getRst(), HIGH);
Module::digitalWrite(_mod->getRst(), HIGH);
// wait to enter Rx state
delay(1);
Module::delay(1);
return(state);
}
@ -539,7 +539,7 @@ int16_t nRF24::config() {
// power up
_mod->SPIsetRegValue(NRF24_REG_CONFIG, NRF24_POWER_UP, 1, 1);
delay(5);
Module::delay(5);
return(state);
}
@ -558,7 +558,7 @@ void nRF24::SPItransfer(uint8_t cmd, bool write, uint8_t* dataOut, uint8_t* data
SPISettings spiSettings = _mod->getSpiSettings();
// start transfer
digitalWrite(_mod->getCs(), LOW);
Module::digitalWrite(_mod->getCs(), LOW);
spi->beginTransaction(spiSettings);
// send command
@ -577,7 +577,7 @@ void nRF24::SPItransfer(uint8_t cmd, bool write, uint8_t* dataOut, uint8_t* data
// stop transfer
spi->endTransaction();
digitalWrite(_mod->getCs(), HIGH);
Module::digitalWrite(_mod->getCs(), HIGH);
}
#endif