From 2fc4bc904327834ce57ac26f27808098d25c6638 Mon Sep 17 00:00:00 2001 From: jgromes Date: Wed, 22 Sep 2021 20:18:05 +0000 Subject: [PATCH] =?UTF-8?q?Deploying=20to=20gh-pages=20from=20=20@=20498b6?= =?UTF-8?q?38234fabe595882eb74436dcc7a53458961=20=F0=9F=9A=80?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- _s_x1272_8h_source.html | 57 +++++++++++++------------ _s_x1273_8h_source.html | 2 +- _s_x1277_8h_source.html | 2 +- _s_x1278_8h_source.html | 51 +++++++++++----------- _s_x127x_8h_source.html | 94 +++++++++++++++++++++-------------------- 5 files changed, 105 insertions(+), 101 deletions(-) diff --git a/_s_x1272_8h_source.html b/_s_x1272_8h_source.html index 6d8640fb..f036a9ef 100644 --- a/_s_x1272_8h_source.html +++ b/_s_x1272_8h_source.html @@ -228,41 +228,42 @@ $(document).ready(function(){initNavTree('_s_x1272_8h_source.html',''); initResi
300  int16_t setHeaderType(uint8_t headerType, size_t len = 0xFF);
301 
302  int16_t configFSK();
-
303 
-
304 #if !defined(RADIOLIB_GODMODE)
-
305  private:
-
306 #endif
-
307  bool _ldroAuto = true;
-
308  bool _ldroEnabled = false;
-
309 
-
310 };
-
311 
-
312 #endif
-
313 
-
314 #endif
+
303  void errataFix(bool rx);
+
304 
+
305 #if !defined(RADIOLIB_GODMODE)
+
306  private:
+
307 #endif
+
308  bool _ldroAuto = true;
+
309  bool _ldroEnabled = false;
+
310 
+
311 };
+
312 
+
313 #endif
+
314 
+
315 #endif
-
SX1272::setFrequency
int16_t setFrequency(float freq)
Sets carrier frequency. Allowed values range from 860.0 MHz to 1020.0 MHz.
Definition: SX1272.cpp:75
+
SX1272::setFrequency
int16_t setFrequency(float freq)
Sets carrier frequency. Allowed values range from 860.0 MHz to 1020.0 MHz.
Definition: SX1272.cpp:70
SX1272::begin
int16_t begin(float freq=915.0, float bw=125.0, uint8_t sf=9, uint8_t cr=7, uint8_t syncWord=SX127X_SYNC_WORD, int8_t power=10, uint16_t preambleLength=8, uint8_t gain=0)
LoRa modem initialization method. Must be called at least once from Arduino sketch to initialize the ...
Definition: SX1272.cpp:8
-
SX1272::setGain
int16_t setGain(uint8_t gain)
Sets gain of receiver LNA (low-noise amplifier). Can be set to any integer in range 1 to 6 where 1 is...
Definition: SX1272.cpp:245
-
SX1272::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf)
Sets LoRa link spreading factor. Allowed values range from 6 to 12. Only available in LoRa mode.
Definition: SX1272.cpp:126
-
SX1272::getRSSI
float getRSSI(bool skipReceive=false)
Gets recorded signal strength indicator of the latest received packet for LoRa modem,...
Definition: SX1272.cpp:344
-
SX1272::forceLDRO
int16_t forceLDRO(bool enable)
Forces LoRa low data rate optimization. Only available in LoRa mode. After calling this method,...
Definition: SX1272.cpp:405
+
SX1272::setGain
int16_t setGain(uint8_t gain)
Sets gain of receiver LNA (low-noise amplifier). Can be set to any integer in range 1 to 6 where 1 is...
Definition: SX1272.cpp:240
+
SX1272::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf)
Sets LoRa link spreading factor. Allowed values range from 6 to 12. Only available in LoRa mode.
Definition: SX1272.cpp:121
+
SX1272::getRSSI
float getRSSI(bool skipReceive=false)
Gets recorded signal strength indicator of the latest received packet for LoRa modem,...
Definition: SX1272.cpp:339
+
SX1272::forceLDRO
int16_t forceLDRO(bool enable)
Forces LoRa low data rate optimization. Only available in LoRa mode. After calling this method,...
Definition: SX1272.cpp:400
SX1272
Derived class for SX1272 modules. Also used as base class for SX1273. Both modules use the same basic...
Definition: SX1272.h:95
-
SX1272::setDataShapingOOK
int16_t setDataShapingOOK(uint8_t sh)
Sets filter cutoff frequency that will be used for data shaping. Allowed values are 1 for frequency e...
Definition: SX1272.cpp:311
-
SX1272::setCodingRate
int16_t setCodingRate(uint8_t cr)
Sets LoRa link coding rate denominator. Allowed values range from 5 to 8. Only available in LoRa mode...
Definition: SX1272.cpp:182
+
SX1272::setDataShapingOOK
int16_t setDataShapingOOK(uint8_t sh)
Sets filter cutoff frequency that will be used for data shaping. Allowed values are 1 for frequency e...
Definition: SX1272.cpp:306
+
SX1272::setCodingRate
int16_t setCodingRate(uint8_t cr)
Sets LoRa link coding rate denominator. Allowed values range from 5 to 8. Only available in LoRa mode...
Definition: SX1272.cpp:177
SX127x
Base class for SX127x series. All derived classes for SX127x (e.g. SX1278 or SX1272) inherit from thi...
Definition: SX127x.h:547
-
SX1272::setBandwidth
int16_t setBandwidth(float bw)
Sets LoRa link bandwidth. Allowed values are 125, 250 and 500 kHz. Only available in LoRa mode.
Definition: SX1272.cpp:86
-
SX1272::autoLDRO
int16_t autoLDRO()
Re-enables automatic LDRO configuration. Only available in LoRa mode. After calling this method,...
Definition: SX1272.cpp:418
-
SX1272::setDataShaping
int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Only available in FSK...
Definition: SX1272.cpp:281
-
SX1272::beginFSK
int16_t beginFSK(float freq=915.0, float br=48.0, float rxBw=125.0, float freqDev=50.0, int8_t power=10, uint16_t preambleLength=16, bool enableOOK=false)
FSK modem initialization method. Must be called at least once from Arduino sketch to initialize the m...
Definition: SX1272.cpp:40
+
SX1272::setBandwidth
int16_t setBandwidth(float bw)
Sets LoRa link bandwidth. Allowed values are 125, 250 and 500 kHz. Only available in LoRa mode.
Definition: SX1272.cpp:81
+
SX1272::autoLDRO
int16_t autoLDRO()
Re-enables automatic LDRO configuration. Only available in LoRa mode. After calling this method,...
Definition: SX1272.cpp:413
+
SX1272::setDataShaping
int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Only available in FSK...
Definition: SX1272.cpp:276
+
SX1272::beginFSK
int16_t beginFSK(float freq=915.0, float br=48.0, float rxBw=125.0, float freqDev=50.0, int8_t power=10, uint16_t preambleLength=16, bool enableOOK=false)
FSK modem initialization method. Must be called at least once from Arduino sketch to initialize the m...
Definition: SX1272.cpp:35
Module
Implements all common low-level SPI/UART methods to control the wireless module. Every module class c...
Definition: Module.h:17
-
SX1272::reset
void reset() override
Reset method. Will reset the chip to the default state using RST pin.
Definition: SX1272.cpp:67
-
SX1272::setCRC
int16_t setCRC(bool enable, bool mode=false)
Enables/disables CRC check of received packets.
Definition: SX1272.cpp:377
+
SX1272::reset
void reset() override
Reset method. Will reset the chip to the default state using RST pin.
Definition: SX1272.cpp:62
+
SX1272::setCRC
int16_t setCRC(bool enable, bool mode=false)
Enables/disables CRC check of received packets.
Definition: SX1272.cpp:372
SX1272::SX1272
SX1272(Module *mod)
Default constructor. Called from Arduino sketch when creating new LoRa instance.
Definition: SX1272.cpp:4
-
SX1272::implicitHeader
int16_t implicitHeader(size_t len)
Set implicit header mode for future reception/transmission.
Definition: SX1272.cpp:427
-
SX1272::explicitHeader
int16_t explicitHeader()
Set explicit header mode for future reception/transmission.
Definition: SX1272.cpp:431
-
SX1272::setOutputPower
int16_t setOutputPower(int8_t power)
Sets transmission output power. Allowed values range from 2 to 17 dBm.
Definition: SX1272.cpp:216
+
SX1272::implicitHeader
int16_t implicitHeader(size_t len)
Set implicit header mode for future reception/transmission.
Definition: SX1272.cpp:422
+
SX1272::explicitHeader
int16_t explicitHeader()
Set explicit header mode for future reception/transmission.
Definition: SX1272.cpp:426
+
SX1272::setOutputPower
int16_t setOutputPower(int8_t power)
Sets transmission output power. Allowed values range from 2 to 17 dBm.
Definition: SX1272.cpp:211
SX1273::SX1273
SX1273(Module *mod)
Default constructor. Called from Arduino sketch when creating new LoRa instance.
Definition: SX1273.cpp:4
SX1273
Derived class for SX1273 modules. Overrides some methods from SX1272 due to different parameter range...
Definition: SX1273.h:15
-
SX1273::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf)
Sets LoRa link spreading factor. Allowed values range from 6 to 9. Only available in LoRa mode.
Definition: SX1273.cpp:40
+
SX1273::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf)
Sets LoRa link spreading factor. Allowed values range from 6 to 9. Only available in LoRa mode.
Definition: SX1273.cpp:35
SX1273::begin
int16_t begin(float freq=915.0, float bw=125.0, uint8_t sf=9, uint8_t cr=7, uint8_t syncWord=SX127X_SYNC_WORD, int8_t power=10, uint16_t preambleLength=8, uint8_t gain=0)
LoRa modem initialization method. Must be called at least once from Arduino sketch to initialize the ...
Definition: SX1273.cpp:8
SX1272
Derived class for SX1272 modules. Also used as base class for SX1273. Both modules use the same basic...
Definition: SX1272.h:95
Module
Implements all common low-level SPI/UART methods to control the wireless module. Every module class c...
Definition: Module.h:17
diff --git a/_s_x1277_8h_source.html b/_s_x1277_8h_source.html index d35ea4c8..dae2bfc8 100644 --- a/_s_x1277_8h_source.html +++ b/_s_x1277_8h_source.html @@ -129,7 +129,7 @@ $(document).ready(function(){initNavTree('_s_x1277_8h_source.html',''); initResi
SX1277
Derived class for SX1277 modules. Overrides some methods from SX1278 due to different parameter range...
Definition: SX1277.h:15
SX1277::beginFSK
int16_t beginFSK(float freq=434.0, float br=48.0, float freqDev=50.0, float rxBw=125.0, int8_t power=10, uint16_t preambleLength=16, bool enableOOK=false)
FSK modem initialization method. Must be called at least once from Arduino sketch to initialize the m...
Definition: SX1277.cpp:35
SX1277::begin
int16_t begin(float freq=434.0, float bw=125.0, uint8_t sf=9, uint8_t cr=7, uint8_t syncWord=SX127X_SYNC_WORD, int8_t power=10, uint16_t preambleLength=8, uint8_t gain=0)
LoRa modem initialization method. Must be called at least once from Arduino sketch to initialize the ...
Definition: SX1277.cpp:8
-
SX1277::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf)
Sets LoRa link spreading factor. Allowed values range from 6 to 9. Only available in LoRa mode.
Definition: SX1277.cpp:127
+
SX1277::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf)
Sets LoRa link spreading factor. Allowed values range from 6 to 9. Only available in LoRa mode.
Definition: SX1277.cpp:64
SX1278
Derived class for SX1278 modules. Also used as base class for SX1276, SX1277, SX1279,...
Definition: SX1278.h:104
SX1277::setFrequency
int16_t setFrequency(float freq)
Sets carrier frequency. Allowed values range from 137.0 MHz to 1020.0 MHz.
Definition: SX1277.cpp:53
Module
Implements all common low-level SPI/UART methods to control the wireless module. Every module class c...
Definition: Module.h:17
diff --git a/_s_x1278_8h_source.html b/_s_x1278_8h_source.html index 8a4a4d7e..e672d6ac 100644 --- a/_s_x1278_8h_source.html +++ b/_s_x1278_8h_source.html @@ -237,40 +237,41 @@ $(document).ready(function(){initNavTree('_s_x1278_8h_source.html',''); initResi
308  int16_t setHeaderType(uint8_t headerType, size_t len = 0xFF);
309 
310  int16_t configFSK();
-
311 
-
312 #if !defined(RADIOLIB_GODMODE)
-
313  private:
-
314 #endif
-
315  bool _ldroAuto = true;
-
316  bool _ldroEnabled = false;
-
317 
-
318 };
-
319 
-
320 #endif
-
321 
-
322 #endif
+
311  void errataFix(bool rx);
+
312 
+
313 #if !defined(RADIOLIB_GODMODE)
+
314  private:
+
315 #endif
+
316  bool _ldroAuto = true;
+
317  bool _ldroEnabled = false;
+
318 
+
319 };
+
320 
+
321 #endif
+
322 
+
323 #endif
SX1278::reset
void reset() override
Reset method. Will reset the chip to the default state using RST pin.
Definition: SX1278.cpp:62
-
SX1278::implicitHeader
int16_t implicitHeader(size_t len)
Set implicit header mode for future reception/transmission.
Definition: SX1278.cpp:505
+
SX1278::implicitHeader
int16_t implicitHeader(size_t len)
Set implicit header mode for future reception/transmission.
Definition: SX1278.cpp:442
SX1278::begin
int16_t begin(float freq=434.0, float bw=125.0, uint8_t sf=9, uint8_t cr=7, uint8_t syncWord=SX127X_SYNC_WORD, int8_t power=10, uint16_t preambleLength=8, uint8_t gain=0)
LoRa modem initialization method. Must be called at least once from Arduino sketch to initialize the ...
Definition: SX1278.cpp:8
SX1278::SX1278
SX1278(Module *mod)
Default constructor. Called from Arduino sketch when creating new LoRa instance.
Definition: SX1278.cpp:4
-
SX1278::explicitHeader
int16_t explicitHeader()
Set explicit header mode for future reception/transmission.
Definition: SX1278.cpp:509
-
SX1278::setCodingRate
int16_t setCodingRate(uint8_t cr)
Sets LoRa link coding rate denominator. Allowed values range from 5 to 8. Only available in LoRa mode...
Definition: SX1278.cpp:254
-
SX1278::setCRC
int16_t setCRC(bool enable, bool mode=false)
Enables/disables CRC check of received packets.
Definition: SX1278.cpp:455
-
SX1278::setBandwidth
int16_t setBandwidth(float bw)
Sets LoRa link bandwidth. Allowed values are 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125,...
Definition: SX1278.cpp:144
+
SX1278::explicitHeader
int16_t explicitHeader()
Set explicit header mode for future reception/transmission.
Definition: SX1278.cpp:446
+
SX1278::setCodingRate
int16_t setCodingRate(uint8_t cr)
Sets LoRa link coding rate denominator. Allowed values range from 5 to 8. Only available in LoRa mode...
Definition: SX1278.cpp:191
+
SX1278::setCRC
int16_t setCRC(bool enable, bool mode=false)
Enables/disables CRC check of received packets.
Definition: SX1278.cpp:392
+
SX1278::setBandwidth
int16_t setBandwidth(float bw)
Sets LoRa link bandwidth. Allowed values are 10.4, 15.6, 20.8, 31.25, 41.7, 62.5, 125,...
Definition: SX1278.cpp:81
SX1278
Derived class for SX1278 modules. Also used as base class for SX1276, SX1277, SX1279,...
Definition: SX1278.h:104
-
SX1278::getRSSI
float getRSSI(bool skipReceive=false)
Gets recorded signal strength indicator of the latest received packet for LoRa modem,...
Definition: SX1278.cpp:415
+
SX1278::getRSSI
float getRSSI(bool skipReceive=false)
Gets recorded signal strength indicator of the latest received packet for LoRa modem,...
Definition: SX1278.cpp:352
SX127x
Base class for SX127x series. All derived classes for SX127x (e.g. SX1278 or SX1272) inherit from thi...
Definition: SX127x.h:547
SX1278::setFrequency
int16_t setFrequency(float freq)
Sets carrier frequency. Allowed values range from 137.0 MHz to 525.0 MHz.
Definition: SX1278.cpp:70
Module
Implements all common low-level SPI/UART methods to control the wireless module. Every module class c...
Definition: Module.h:17
-
SX1278::forceLDRO
int16_t forceLDRO(bool enable)
Forces LoRa low data rate optimization. Only available in LoRa mode. After calling this method,...
Definition: SX1278.cpp:483
-
SX1278::autoLDRO
int16_t autoLDRO()
Re-enables automatic LDRO configuration. Only available in LoRa mode. After calling this method,...
Definition: SX1278.cpp:496
-
SX1278::setDataShapingOOK
int16_t setDataShapingOOK(uint8_t sh)
Sets filter cutoff frequency that will be used for data shaping. Allowed values are 1 for frequency e...
Definition: SX1278.cpp:383
-
SX1278::setGain
int16_t setGain(uint8_t gain)
Sets gain of receiver LNA (low-noise amplifier). Can be set to any integer in range 1 to 6 where 1 is...
Definition: SX1278.cpp:317
-
SX1278::setDataShaping
int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Only available in FSK...
Definition: SX1278.cpp:353
-
SX1278::setOutputPower
int16_t setOutputPower(int8_t power)
Sets transmission output power. Allowed values range from 2 to 17 dBm.
Definition: SX1278.cpp:288
-
SX1278::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf)
Sets LoRa link spreading factor. Allowed values range from 6 to 12. Only available in LoRa mode.
Definition: SX1278.cpp:198
+
SX1278::forceLDRO
int16_t forceLDRO(bool enable)
Forces LoRa low data rate optimization. Only available in LoRa mode. After calling this method,...
Definition: SX1278.cpp:420
+
SX1278::autoLDRO
int16_t autoLDRO()
Re-enables automatic LDRO configuration. Only available in LoRa mode. After calling this method,...
Definition: SX1278.cpp:433
+
SX1278::setDataShapingOOK
int16_t setDataShapingOOK(uint8_t sh)
Sets filter cutoff frequency that will be used for data shaping. Allowed values are 1 for frequency e...
Definition: SX1278.cpp:320
+
SX1278::setGain
int16_t setGain(uint8_t gain)
Sets gain of receiver LNA (low-noise amplifier). Can be set to any integer in range 1 to 6 where 1 is...
Definition: SX1278.cpp:254
+
SX1278::setDataShaping
int16_t setDataShaping(uint8_t sh) override
Sets Gaussian filter bandwidth-time product that will be used for data shaping. Only available in FSK...
Definition: SX1278.cpp:290
+
SX1278::setOutputPower
int16_t setOutputPower(int8_t power)
Sets transmission output power. Allowed values range from 2 to 17 dBm.
Definition: SX1278.cpp:225
+
SX1278::setSpreadingFactor
int16_t setSpreadingFactor(uint8_t sf)
Sets LoRa link spreading factor. Allowed values range from 6 to 12. Only available in LoRa mode.
Definition: SX1278.cpp:135
SX1278::beginFSK
int16_t beginFSK(float freq=434.0, float br=48.0, float freqDev=50.0, float rxBw=125.0, int8_t power=10, uint16_t preambleLength=16, bool enableOOK=false)
FSK modem initialization method. Must be called at least once from Arduino sketch to initialize the m...
Definition: SX1278.cpp:35
PhysicalLayer::transmit
int16_t transmit(__FlashStringHelper *fstr, uint8_t addr=0)
Arduino Flash String transmit method.
Definition: PhysicalLayer.cpp:10
-
SX127x::setNodeAddress
int16_t setNodeAddress(uint8_t nodeAddr)
Sets FSK node address. Calling this method will enable address filtering. Only available in FSK mode.
Definition: SX127x.cpp:850
-
SX127x::getTempRaw
int8_t getTempRaw()
Reads uncalibrated temperature value. This function will change operating mode and should not be call...
Definition: SX127x.cpp:1090
-
SX127x::variablePacketLengthMode
int16_t variablePacketLengthMode(uint8_t maxLen=SX127X_MAX_PACKET_LENGTH_FSK)
Set modem in variable packet length mode. Available in FSK mode only.
Definition: SX127x.cpp:986
-
SX127x::invertIQ
int16_t invertIQ(bool invertIQ)
Enables/disables Invert the LoRa I and Q signals.
Definition: SX127x.cpp:1279
-
SX127x::setAFCAGCTrigger
int16_t setAFCAGCTrigger(uint8_t trigger)
Controls trigger of AFC and AGC.
Definition: SX127x.cpp:816
-
SX127x::setEncoding
int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Only available in FSK mode. Allowed values are RADIOLIB_ENCODING_NRZ,...
Definition: SX127x.cpp:1013
-
SX127x::setDio1Action
void setDio1Action(void(*func)(void))
Set interrupt service routine function to call when DIO1 activates.
Definition: SX127x.cpp:421
-
SX127x::readBit
void readBit(RADIOLIB_PIN_TYPE pin)
Function to read and process data bit in direct reception mode.
Definition: SX127x.cpp:1303
-
SX127x::setDirectAction
void setDirectAction(void(*func)(void))
Set interrupt service routine function to call when data bit is receveid in direct mode.
Definition: SX127x.cpp:1299
+
SX127x::setNodeAddress
int16_t setNodeAddress(uint8_t nodeAddr)
Sets FSK node address. Calling this method will enable address filtering. Only available in FSK mode.
Definition: SX127x.cpp:862
+
SX127x::getTempRaw
int8_t getTempRaw()
Reads uncalibrated temperature value. This function will change operating mode and should not be call...
Definition: SX127x.cpp:1102
+
SX127x::variablePacketLengthMode
int16_t variablePacketLengthMode(uint8_t maxLen=SX127X_MAX_PACKET_LENGTH_FSK)
Set modem in variable packet length mode. Available in FSK mode only.
Definition: SX127x.cpp:998
+
SX127x::invertIQ
int16_t invertIQ(bool invertIQ)
Enables/disables Invert the LoRa I and Q signals.
Definition: SX127x.cpp:1291
+
SX127x::setAFCAGCTrigger
int16_t setAFCAGCTrigger(uint8_t trigger)
Controls trigger of AFC and AGC.
Definition: SX127x.cpp:828
+
SX127x::setEncoding
int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Only available in FSK mode. Allowed values are RADIOLIB_ENCODING_NRZ,...
Definition: SX127x.cpp:1025
+
SX127x::setDio1Action
void setDio1Action(void(*func)(void))
Set interrupt service routine function to call when DIO1 activates.
Definition: SX127x.cpp:430
+
SX127x::readBit
void readBit(RADIOLIB_PIN_TYPE pin)
Function to read and process data bit in direct reception mode.
Definition: SX127x.cpp:1315
+
SX127x::setDirectAction
void setDirectAction(void(*func)(void))
Set interrupt service routine function to call when data bit is receveid in direct mode.
Definition: SX127x.cpp:1311
SX127x::sleep
int16_t sleep()
Sets the LoRa module to sleep to save power. Module will not be able to transmit or receive any data ...
Definition: SX127x.cpp:288
-
SX127x::startReceive
int16_t startReceive(uint8_t len=0, uint8_t mode=SX127X_RXCONTINUOUS)
Interrupt-driven receive method. DIO0 will be activated when full valid packet is received.
Definition: SX127x.cpp:369
-
SX127x::readData
int16_t readData(uint8_t *data, size_t len) override
Reads data that was received after calling startReceive method. This method reads len characters.
Definition: SX127x.cpp:496
-
SX127x::setAFC
int16_t setAFC(bool isEnabled)
Enables or disables FSK automatic frequency correction(AFC)
Definition: SX127x.cpp:806
-
SX127x::clearDio1Action
void clearDio1Action()
Clears interrupt service routine to call when DIO1 activates.
Definition: SX127x.cpp:428
-
SX127x::setSyncWord
int16_t setSyncWord(uint8_t syncWord)
Sets LoRa sync word. Only available in LoRa mode.
Definition: SX127x.cpp:553
+
SX127x::startReceive
int16_t startReceive(uint8_t len=0, uint8_t mode=SX127X_RXCONTINUOUS)
Interrupt-driven receive method. DIO0 will be activated when full valid packet is received.
Definition: SX127x.cpp:375
+
SX127x::readData
int16_t readData(uint8_t *data, size_t len) override
Reads data that was received after calling startReceive method. This method reads len characters.
Definition: SX127x.cpp:508
+
SX127x::setAFC
int16_t setAFC(bool isEnabled)
Enables or disables FSK automatic frequency correction(AFC)
Definition: SX127x.cpp:818
+
SX127x::clearDio1Action
void clearDio1Action()
Clears interrupt service routine to call when DIO1 activates.
Definition: SX127x.cpp:437
+
SX127x::setSyncWord
int16_t setSyncWord(uint8_t syncWord)
Sets LoRa sync word. Only available in LoRa mode.
Definition: SX127x.cpp:565
PhysicalLayer::readData
int16_t readData(String &str, size_t len=0)
Reads data that was received after calling startReceive method.
Definition: PhysicalLayer.cpp:59
SX127x::beginFSK
int16_t beginFSK(uint8_t chipVersion, float br, float freqDev, float rxBw, uint16_t preambleLength, bool enableOOK)
Initialization method for FSK modem. Will be called with appropriate parameters when calling FSK init...
Definition: SX127x.cpp:55
-
SX127x::receiveDirect
int16_t receiveDirect() override
Enables direct reception mode on pins DIO1 (clock) and DIO2 (data). While in direct mode,...
Definition: SX127x.cpp:330
-
SX127x::setDio0Action
void setDio0Action(void(*func)(void))
Set interrupt service routine function to call when DIO0 activates.
Definition: SX127x.cpp:413
-
SX127x::setFrequencyDeviation
int16_t setFrequencyDeviation(float freqDev) override
Sets FSK frequency deviation from carrier frequency. Allowed values depend on bit rate setting and mu...
Definition: SX127x.cpp:732
-
SX127x::getDataRate
float getDataRate() const
Get data rate of the latest transmitted packet.
Definition: SX127x.cpp:699
+
SX127x::receiveDirect
int16_t receiveDirect() override
Enables direct reception mode on pins DIO1 (clock) and DIO2 (data). While in direct mode,...
Definition: SX127x.cpp:333
+
SX127x::setDio0Action
void setDio0Action(void(*func)(void))
Set interrupt service routine function to call when DIO0 activates.
Definition: SX127x.cpp:422
+
SX127x::setFrequencyDeviation
int16_t setFrequencyDeviation(float freqDev) override
Sets FSK frequency deviation from carrier frequency. Allowed values depend on bit rate setting and mu...
Definition: SX127x.cpp:744
+
SX127x::getDataRate
float getDataRate() const
Get data rate of the latest transmitted packet.
Definition: SX127x.cpp:711
SX127x::transmit
int16_t transmit(uint8_t *data, size_t len, uint8_t addr=0) override
Binary transmit method. Will transmit arbitrary binary data up to 255 bytes long using LoRa or up to ...
Definition: SX127x.cpp:137
-
SX127x::fixedPacketLengthMode
int16_t fixedPacketLengthMode(uint8_t len=SX127X_MAX_PACKET_LENGTH_FSK)
Set modem in fixed packet length mode. Available in FSK mode only.
Definition: SX127x.cpp:982
-
SX127x::setOokFixedOrFloorThreshold
int16_t setOokFixedOrFloorThreshold(uint8_t value)
Fixed threshold for the Data Slicer in OOK mode or floor threshold for the Data Slicer in OOK when Pe...
Definition: SX127x.cpp:904
-
SX127x::setRfSwitchPins
void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn)
Some modules contain external RF switch controlled by two pins. This function gives RadioLib control ...
Definition: SX127x.cpp:1057
-
SX127x::disableAddressFiltering
int16_t disableAddressFiltering()
Disables FSK address filtering.
Definition: SX127x.cpp:878
+
SX127x::fixedPacketLengthMode
int16_t fixedPacketLengthMode(uint8_t len=SX127X_MAX_PACKET_LENGTH_FSK)
Set modem in fixed packet length mode. Available in FSK mode only.
Definition: SX127x.cpp:994
+
SX127x::setOokFixedOrFloorThreshold
int16_t setOokFixedOrFloorThreshold(uint8_t value)
Fixed threshold for the Data Slicer in OOK mode or floor threshold for the Data Slicer in OOK when Pe...
Definition: SX127x.cpp:916
+
SX127x::setRfSwitchPins
void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn)
Some modules contain external RF switch controlled by two pins. This function gives RadioLib control ...
Definition: SX127x.cpp:1069
+
SX127x::disableAddressFiltering
int16_t disableAddressFiltering()
Disables FSK address filtering.
Definition: SX127x.cpp:890
SX127x::transmitDirect
int16_t transmitDirect(uint32_t frf=0) override
Enables direct transmission mode on pins DIO1 (clock) and DIO2 (data). While in direct mode,...
Definition: SX127x.cpp:304
-
SX127x::startTransmit
int16_t startTransmit(uint8_t *data, size_t len, uint8_t addr=0) override
Interrupt-driven binary transmit method. Will start transmitting arbitrary binary data up to 255 byte...
Definition: SX127x.cpp:435
-
SX127x::setBroadcastAddress
int16_t setBroadcastAddress(uint8_t broadAddr)
Sets FSK broadcast address. Calling this method will enable address filtering. Only available in FSK ...
Definition: SX127x.cpp:864
-
SX127x::getAFCError
float getAFCError()
Gets current AFC error.
Definition: SX127x.cpp:672
-
SX127x::getModemStatus
uint8_t getModemStatus()
Reads modem status. Only available in LoRa mode.
Definition: SX127x.cpp:1047
-
SX127x::randomByte
uint8_t randomByte()
Get one truly random byte from RSSI noise.
Definition: SX127x.cpp:1061
+
SX127x::startTransmit
int16_t startTransmit(uint8_t *data, size_t len, uint8_t addr=0) override
Interrupt-driven binary transmit method. Will start transmitting arbitrary binary data up to 255 byte...
Definition: SX127x.cpp:444
+
SX127x::setBroadcastAddress
int16_t setBroadcastAddress(uint8_t broadAddr)
Sets FSK broadcast address. Calling this method will enable address filtering. Only available in FSK ...
Definition: SX127x.cpp:876
+
SX127x::getAFCError
float getAFCError()
Gets current AFC error.
Definition: SX127x.cpp:684
+
SX127x::getModemStatus
uint8_t getModemStatus()
Reads modem status. Only available in LoRa mode.
Definition: SX127x.cpp:1059
+
SX127x::randomByte
uint8_t randomByte()
Get one truly random byte from RSSI noise.
Definition: SX127x.cpp:1073
SX127x::standby
int16_t standby() override
Sets the LoRa module to standby.
Definition: SX127x.cpp:296
SX127x
Base class for SX127x series. All derived classes for SX127x (e.g. SX1278 or SX1272) inherit from thi...
Definition: SX127x.h:547
-
SX127x::getSNR
float getSNR()
Gets signal-to-noise ratio of the latest received packet.
Definition: SX127x.cpp:688
+
SX127x::getSNR
float getSNR()
Gets signal-to-noise ratio of the latest received packet.
Definition: SX127x.cpp:700
SX127x::reset
virtual void reset()=0
Reset method. Will reset the chip to the default state using RST pin. Declared pure virtual since SX1...
SX127x::begin
int16_t begin(uint8_t chipVersion, uint8_t syncWord, uint16_t preambleLength)
Initialization method. Will be called with appropriate parameters when calling initialization method ...
Definition: SX127x.cpp:8
-
SX127x::setPreambleLength
int16_t setPreambleLength(uint16_t preambleLength)
Sets LoRa or FSK preamble length. Allowed values range from 6 to 65535 in LoRa mode or 0 to 65535 in ...
Definition: SX127x.cpp:590
-
SX127x::setBitRate
int16_t setBitRate(float br)
Sets FSK bit rate. Allowed values range from 1.2 to 300 kbps. Only available in FSK mode.
Definition: SX127x.cpp:703
+
SX127x::setPreambleLength
int16_t setPreambleLength(uint16_t preambleLength)
Sets LoRa or FSK preamble length. Allowed values range from 6 to 65535 in LoRa mode or 0 to 65535 in ...
Definition: SX127x.cpp:602
+
SX127x::setBitRate
int16_t setBitRate(float br)
Sets FSK bit rate. Allowed values range from 1.2 to 300 kbps. Only available in FSK mode.
Definition: SX127x.cpp:715
PhysicalLayer
Provides common interface for protocols that run on LoRa/FSK modules, such as RTTY or LoRaWAN....
Definition: PhysicalLayer.h:14
PhysicalLayer::receive
int16_t receive(String &str, size_t len=0)
Arduino String receive method.
Definition: PhysicalLayer.cpp:100
-
SX127x::clearDio0Action
void clearDio0Action()
Clears interrupt service routine to call when DIO0 activates.
Definition: SX127x.cpp:417
-
SX127x::getIRQFlags
uint16_t getIRQFlags()
Reads currently active IRQ flags, can be used to check which event caused an interrupt....
Definition: SX127x.cpp:1032
-
SX127x::setOokPeakThresholdDecrement
int16_t setOokPeakThresholdDecrement(uint8_t value)
Period of decrement of the RSSI threshold in the OOK demodulator.
Definition: SX127x.cpp:912
-
SX127x::setRSSIConfig
int16_t setRSSIConfig(uint8_t smoothingSamples, int8_t offset=0)
Sets RSSI measurement configuration in FSK mode.
Definition: SX127x.cpp:990
-
SX127x::setOokThresholdType
int16_t setOokThresholdType(uint8_t type)
Selects the type of threshold in the OOK data slicer.
Definition: SX127x.cpp:896
-
SX127x::setAFCBandwidth
int16_t setAFCBandwidth(float afcBw)
Sets FSK automatic frequency correction bandwidth. Allowed values range from 2.6 to 250 kHz....
Definition: SX127x.cpp:790
-
SX127x::setOOK
int16_t setOOK(bool enableOOK)
Enables/disables OOK modulation instead of FSK.
Definition: SX127x.cpp:920
-
SX127x::setRxBandwidth
int16_t setRxBandwidth(float rxBw)
Sets FSK receiver bandwidth. Allowed values range from 2.6 to 250 kHz. Only available in FSK mode.
Definition: SX127x.cpp:774
+
SX127x::clearDio0Action
void clearDio0Action()
Clears interrupt service routine to call when DIO0 activates.
Definition: SX127x.cpp:426
+
SX127x::getIRQFlags
uint16_t getIRQFlags()
Reads currently active IRQ flags, can be used to check which event caused an interrupt....
Definition: SX127x.cpp:1044
+
SX127x::setOokPeakThresholdDecrement
int16_t setOokPeakThresholdDecrement(uint8_t value)
Period of decrement of the RSSI threshold in the OOK demodulator.
Definition: SX127x.cpp:924
+
SX127x::setRSSIConfig
int16_t setRSSIConfig(uint8_t smoothingSamples, int8_t offset=0)
Sets RSSI measurement configuration in FSK mode.
Definition: SX127x.cpp:1002
+
SX127x::setOokThresholdType
int16_t setOokThresholdType(uint8_t type)
Selects the type of threshold in the OOK data slicer.
Definition: SX127x.cpp:908
+
SX127x::setAFCBandwidth
int16_t setAFCBandwidth(float afcBw)
Sets FSK automatic frequency correction bandwidth. Allowed values range from 2.6 to 250 kHz....
Definition: SX127x.cpp:802
+
SX127x::setOOK
int16_t setOOK(bool enableOOK)
Enables/disables OOK modulation instead of FSK.
Definition: SX127x.cpp:932
+
SX127x::setRxBandwidth
int16_t setRxBandwidth(float rxBw)
Sets FSK receiver bandwidth. Allowed values range from 2.6 to 250 kHz. Only available in FSK mode.
Definition: SX127x.cpp:786
Module
Implements all common low-level SPI/UART methods to control the wireless module. Every module class c...
Definition: Module.h:17
SX127x::scanChannel
int16_t scanChannel()
Performs scan for valid LoRa preamble in the current channel.
Definition: SX127x.cpp:249
SX127x::receive
int16_t receive(uint8_t *data, size_t len) override
Binary receive method. Will attempt to receive arbitrary binary data up to 255 bytes long using LoRa ...
Definition: SX127x.cpp:204
-
SX127x::getChipVersion
int16_t getChipVersion()
Read version SPI register. Should return SX1278_CHIP_VERSION (0x12) or SX1272_CHIP_VERSION (0x22) if ...
Definition: SX127x.cpp:1086
-
SX127x::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: SX127x.cpp:954
+
SX127x::getChipVersion
int16_t getChipVersion()
Read version SPI register. Should return SX1278_CHIP_VERSION (0x12) or SX1272_CHIP_VERSION (0x22) if ...
Definition: SX127x.cpp:1098
+
SX127x::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: SX127x.cpp:966
SX127x::SX127x
SX127x(Module *mod)
Default constructor. Called internally when creating new LoRa instance.
Definition: SX127x.cpp:4
-
SX127x::packetMode
int16_t packetMode()
Disables direct mode and enables packet mode, allowing the module to receive packets....
Definition: SX127x.cpp:360
-
SX127x::setCurrentLimit
int16_t setCurrentLimit(uint8_t currentLimit)
Sets current limit for over current protection at transmitter amplifier. Allowed values range from 45...
Definition: SX127x.cpp:566
-
SX127x::getFrequencyError
float getFrequencyError(bool autoCorrect=false)
Gets frequency error of the latest received packet.
Definition: SX127x.cpp:619
+
SX127x::packetMode
int16_t packetMode()
Disables direct mode and enables packet mode, allowing the module to receive packets....
Definition: SX127x.cpp:366
+
SX127x::setCurrentLimit
int16_t setCurrentLimit(uint8_t currentLimit)
Sets current limit for over current protection at transmitter amplifier. Allowed values range from 45...
Definition: SX127x.cpp:578
+
SX127x::getFrequencyError
float getFrequencyError(bool autoCorrect=false)
Gets frequency error of the latest received packet.
Definition: SX127x.cpp:631
PhysicalLayer::startTransmit
int16_t startTransmit(String &str, uint8_t addr=0)
Interrupt-driven Arduino String transmit method. Unlike the standard transmit method,...
Definition: PhysicalLayer.cpp:51