From 199c6fd8836cb2c22e45b7b4d36193283b4acb32 Mon Sep 17 00:00:00 2001 From: jgromes Date: Thu, 18 Aug 2022 18:49:44 +0000 Subject: [PATCH] =?UTF-8?q?Deploying=20to=20gh-pages=20from=20=20@=20a8c07?= =?UTF-8?q?9f85e9af860d02dbb1a741f2fea22b47693=20=F0=9F=9A=80?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- _module_8h_source.html | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/_module_8h_source.html b/_module_8h_source.html index 15c9c291..ac783f08 100644 --- a/_module_8h_source.html +++ b/_module_8h_source.html @@ -274,7 +274,7 @@ $(document).ready(function(){initNavTree('_module_8h_source.html',''); initResiz
Module::transfer
uint8_t transfer(uint8_t b)
Arduino core SPI transfer override.
Definition: Module.cpp:418
Module::init
void init()
Initialize low-level module control.
Definition: Module.cpp:107
Module::SPIgetRegValue
int16_t SPIgetRegValue(uint8_t reg, uint8_t msb=7, uint8_t lsb=0)
SPI read method that automatically masks unused bits. This method is the preferred SPI read mechanism...
Definition: Module.cpp:130
-
Module::regdump
void regdump(uint8_t start, uint8_t len)
Function to dump device registers as hex into the debug port.
Definition: Module.cpp:510
+
Module::regdump
void regdump(uint8_t start, uint8_t len)
Function to dump device registers as hex into the debug port.
Definition: Module.cpp:522
Module::getRst
RADIOLIB_PIN_TYPE getRst() const
Access method to get the pin number of hardware reset pin.
Definition: Module.h:216
Module::begin
void begin()
Arduino core SPI begin override.
Definition: Module.cpp:400
Module::SPIwriteCommand
uint8_t SPIwriteCommand
Basic SPI write command. Defaults to 0x80.
Definition: Module.h:92
@@ -288,7 +288,7 @@ $(document).ready(function(){initNavTree('_module_8h_source.html',''); initResiz
Module::SPIwriteRegister
void SPIwriteRegister(uint8_t reg, uint8_t data)
SPI basic write method. Use of this method is reserved for special cases, SPIsetRegValue should be us...
Definition: Module.cpp:203
Module::noTone
void noTone(RADIOLIB_PIN_TYPE pin)
Arduino core noTone override that checks RADIOLIB_NC as alias for unused pin and RADIOLIB_TONE_UNSUPP...
Definition: Module.cpp:315
Module::endTransaction
void endTransaction()
Arduino core SPI endTransaction override.
Definition: Module.cpp:427
-
Module::setRfSwitchPins
void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn)
Some modules contain external RF switch controlled by two pins. This function gives RadioLib control ...
Definition: Module.cpp:523
+
Module::setRfSwitchPins
void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn)
Some modules contain external RF switch controlled by two pins. This function gives RadioLib control ...
Definition: Module.cpp:535
Module::getGpio
RADIOLIB_PIN_TYPE getGpio() const
Access method to get the pin number of second interrupt/GPIO.
Definition: Module.h:223
Module::Module
Module(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE gpio=RADIOLIB_NC)
Default constructor.
Definition: Module.cpp:81
Module::flipBits16
static uint16_t flipBits16(uint16_t i)
Function to reflect bits within an integer.
Definition: Module.cpp:482
@@ -299,7 +299,7 @@ $(document).ready(function(){initNavTree('_module_8h_source.html',''); initResiz
Module::term
void term()
Terminate low-level module control.
Definition: Module.cpp:117
Module::SPIreadCommand
uint8_t SPIreadCommand
Basic SPI read command. Defaults to 0x00.
Definition: Module.h:87
Module::detachInterrupt
void detachInterrupt(RADIOLIB_PIN_TYPE interruptNum)
Arduino core detachInterrupt override.
Definition: Module.cpp:349
-
Module::setRfSwitchState
void setRfSwitchState(RADIOLIB_PIN_STATUS rxPinState, RADIOLIB_PIN_STATUS txPinState)
Set RF switch state.
Definition: Module.cpp:531
+
Module::setRfSwitchState
void setRfSwitchState(RADIOLIB_PIN_STATUS rxPinState, RADIOLIB_PIN_STATUS txPinState)
Set RF switch state.
Definition: Module.cpp:543
Module::SPIreadRegisterBurst
void SPIreadRegisterBurst(uint8_t reg, uint8_t numBytes, uint8_t *inBytes)
SPI burst read method.
Definition: Module.cpp:189
Module::pulseIn
uint32_t pulseIn(RADIOLIB_PIN_TYPE pin, RADIOLIB_PIN_STATUS state, uint32_t timeout)
Arduino core pulseIn override.
Definition: Module.cpp:393
Module::flipBits
static uint8_t flipBits(uint8_t b)
Function to reflect bits within a byte.
Definition: Module.cpp:475