From 11783a81c3a35aa999922b27e1bd3899a5322a9b Mon Sep 17 00:00:00 2001 From: jgromes Date: Sun, 3 Apr 2022 10:15:14 +0000 Subject: [PATCH] =?UTF-8?q?Deploying=20to=20gh-pages=20from=20=20@=202e183?= =?UTF-8?q?d70bb3f4717d70d096537b795f6d8cece8a=20=F0=9F=9A=80?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- _s_x127x_8h_source.html | 114 ++++++++++++++++++++-------------------- 1 file changed, 57 insertions(+), 57 deletions(-) diff --git a/_s_x127x_8h_source.html b/_s_x127x_8h_source.html index c5424e17..18b98c41 100644 --- a/_s_x127x_8h_source.html +++ b/_s_x127x_8h_source.html @@ -816,72 +816,72 @@ $(document).ready(function(){initNavTree('_s_x127x_8h_source.html',''); initResi
PhysicalLayer::transmit
int16_t transmit(__FlashStringHelper *fstr, uint8_t addr=0)
Arduino Flash String transmit method.
Definition: PhysicalLayer.cpp:10
-
SX127x::setNodeAddress
int16_t setNodeAddress(uint8_t nodeAddr)
Sets FSK node address. Calling this method will enable address filtering. Only available in FSK mode.
Definition: SX127x.cpp:891
-
SX127x::getTempRaw
int8_t getTempRaw()
Reads uncalibrated temperature value. This function will change operating mode and should not be call...
Definition: SX127x.cpp:1153
-
SX127x::startReceive
int16_t startReceive(uint8_t len=0, uint8_t mode=RADIOLIB_SX127X_RXCONTINUOUS)
Interrupt-driven receive method. DIO0 will be activated when full valid packet is received.
Definition: SX127x.cpp:370
-
SX127x::clearFHSSInt
void clearFHSSInt(void)
Clear the FHSS interrupt.
Definition: SX127x.cpp:1382
-
SX127x::invertIQ
int16_t invertIQ(bool invertIQ)
Enables/disables Invert the LoRa I and Q signals.
Definition: SX127x.cpp:1342
-
SX127x::setAFCAGCTrigger
int16_t setAFCAGCTrigger(uint8_t trigger)
Controls trigger of AFC and AGC.
Definition: SX127x.cpp:857
-
SX127x::setEncoding
int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Only available in FSK mode. Allowed values are RADIOLIB_ENCODING_NRZ,...
Definition: SX127x.cpp:1076
-
SX127x::setDio1Action
void setDio1Action(void(*func)(void))
Set interrupt service routine function to call when DIO1 activates.
Definition: SX127x.cpp:430
-
SX127x::readBit
void readBit(RADIOLIB_PIN_TYPE pin)
Function to read and process data bit in direct reception mode.
Definition: SX127x.cpp:1366
-
SX127x::enableBitSync
int16_t enableBitSync()
Enable Bit synchronizer.
Definition: SX127x.cpp:969
-
SX127x::setDirectAction
void setDirectAction(void(*func)(void))
Set interrupt service routine function to call when data bit is receveid in direct mode.
Definition: SX127x.cpp:1362
-
SX127x::sleep
int16_t sleep()
Sets the LoRa module to sleep to save power. Module will not be able to transmit or receive any data ...
Definition: SX127x.cpp:279
-
SX127x::readData
int16_t readData(uint8_t *data, size_t len) override
Reads data that was received after calling startReceive method. This method reads len characters.
Definition: SX127x.cpp:513
-
SX127x::variablePacketLengthMode
int16_t variablePacketLengthMode(uint8_t maxLen=RADIOLIB_SX127X_MAX_PACKET_LENGTH_FSK)
Set modem in variable packet length mode. Available in FSK mode only.
Definition: SX127x.cpp:1049
-
SX127x::disableBitSync
int16_t disableBitSync()
Disable Bit synchronizer (not allowed in Packet mode).
Definition: SX127x.cpp:973
-
SX127x::setAFC
int16_t setAFC(bool isEnabled)
Enables or disables FSK automatic frequency correction(AFC)
Definition: SX127x.cpp:847
-
SX127x::setOokPeakThresholdStep
int16_t setOokPeakThresholdStep(uint8_t value)
Size of each decrement of the RSSI threshold in the OOK demodulator.
Definition: SX127x.cpp:961
-
SX127x::clearDio1Action
void clearDio1Action()
Clears interrupt service routine to call when DIO1 activates.
Definition: SX127x.cpp:437
-
SX127x::setSyncWord
int16_t setSyncWord(uint8_t syncWord)
Sets LoRa sync word. Only available in LoRa mode.
Definition: SX127x.cpp:594
+
SX127x::setNodeAddress
int16_t setNodeAddress(uint8_t nodeAddr)
Sets FSK node address. Calling this method will enable address filtering. Only available in FSK mode.
Definition: SX127x.cpp:886
+
SX127x::getTempRaw
int8_t getTempRaw()
Reads uncalibrated temperature value. This function will change operating mode and should not be call...
Definition: SX127x.cpp:1148
+
SX127x::startReceive
int16_t startReceive(uint8_t len=0, uint8_t mode=RADIOLIB_SX127X_RXCONTINUOUS)
Interrupt-driven receive method. DIO0 will be activated when full valid packet is received.
Definition: SX127x.cpp:365
+
SX127x::clearFHSSInt
void clearFHSSInt(void)
Clear the FHSS interrupt.
Definition: SX127x.cpp:1377
+
SX127x::invertIQ
int16_t invertIQ(bool invertIQ)
Enables/disables Invert the LoRa I and Q signals.
Definition: SX127x.cpp:1337
+
SX127x::setAFCAGCTrigger
int16_t setAFCAGCTrigger(uint8_t trigger)
Controls trigger of AFC and AGC.
Definition: SX127x.cpp:852
+
SX127x::setEncoding
int16_t setEncoding(uint8_t encoding) override
Sets transmission encoding. Only available in FSK mode. Allowed values are RADIOLIB_ENCODING_NRZ,...
Definition: SX127x.cpp:1071
+
SX127x::setDio1Action
void setDio1Action(void(*func)(void))
Set interrupt service routine function to call when DIO1 activates.
Definition: SX127x.cpp:425
+
SX127x::readBit
void readBit(RADIOLIB_PIN_TYPE pin)
Function to read and process data bit in direct reception mode.
Definition: SX127x.cpp:1361
+
SX127x::enableBitSync
int16_t enableBitSync()
Enable Bit synchronizer.
Definition: SX127x.cpp:964
+
SX127x::setDirectAction
void setDirectAction(void(*func)(void))
Set interrupt service routine function to call when data bit is receveid in direct mode.
Definition: SX127x.cpp:1357
+
SX127x::sleep
int16_t sleep()
Sets the LoRa module to sleep to save power. Module will not be able to transmit or receive any data ...
Definition: SX127x.cpp:274
+
SX127x::readData
int16_t readData(uint8_t *data, size_t len) override
Reads data that was received after calling startReceive method. This method reads len characters.
Definition: SX127x.cpp:508
+
SX127x::variablePacketLengthMode
int16_t variablePacketLengthMode(uint8_t maxLen=RADIOLIB_SX127X_MAX_PACKET_LENGTH_FSK)
Set modem in variable packet length mode. Available in FSK mode only.
Definition: SX127x.cpp:1044
+
SX127x::disableBitSync
int16_t disableBitSync()
Disable Bit synchronizer (not allowed in Packet mode).
Definition: SX127x.cpp:968
+
SX127x::setAFC
int16_t setAFC(bool isEnabled)
Enables or disables FSK automatic frequency correction(AFC)
Definition: SX127x.cpp:842
+
SX127x::setOokPeakThresholdStep
int16_t setOokPeakThresholdStep(uint8_t value)
Size of each decrement of the RSSI threshold in the OOK demodulator.
Definition: SX127x.cpp:956
+
SX127x::clearDio1Action
void clearDio1Action()
Clears interrupt service routine to call when DIO1 activates.
Definition: SX127x.cpp:432
+
SX127x::setSyncWord
int16_t setSyncWord(uint8_t syncWord)
Sets LoRa sync word. Only available in LoRa mode.
Definition: SX127x.cpp:589
PhysicalLayer::readData
int16_t readData(String &str, size_t len=0)
Reads data that was received after calling startReceive method.
Definition: PhysicalLayer.cpp:59
SX127x::beginFSK
int16_t beginFSK(uint8_t chipVersion, float br, float freqDev, float rxBw, uint16_t preambleLength, bool enableOOK)
Initialization method for FSK modem. Will be called with appropriate parameters when calling FSK init...
Definition: SX127x.cpp:59
-
SX127x::receiveDirect
int16_t receiveDirect() override
Enables direct reception mode on pins DIO1 (clock) and DIO2 (data). While in direct mode,...
Definition: SX127x.cpp:324
-
SX127x::setDio0Action
void setDio0Action(void(*func)(void))
Set interrupt service routine function to call when DIO0 activates.
Definition: SX127x.cpp:422
-
SX127x::setFrequencyDeviation
int16_t setFrequencyDeviation(float freqDev) override
Sets FSK frequency deviation from carrier frequency. Allowed values depend on bit rate setting and mu...
Definition: SX127x.cpp:773
-
SX127x::startChannelScan
int16_t startChannelScan()
Interrupt-driven channel activity detection method. DIO0 will be activated when LoRa preamble is dete...
Definition: SX127x.cpp:569
-
SX127x::getDataRate
float getDataRate() const
Get data rate of the latest transmitted packet.
Definition: SX127x.cpp:740
-
SX127x::transmit
int16_t transmit(uint8_t *data, size_t len, uint8_t addr=0) override
Binary transmit method. Will transmit arbitrary binary data up to 255 bytes long using LoRa or up to ...
Definition: SX127x.cpp:147
-
SX127x::setOokFixedOrFloorThreshold
int16_t setOokFixedOrFloorThreshold(uint8_t value)
Fixed threshold for the Data Slicer in OOK mode or floor threshold for the Data Slicer in OOK when Pe...
Definition: SX127x.cpp:945
-
SX127x::setRfSwitchPins
void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn)
Some modules contain external RF switch controlled by two pins. This function gives RadioLib control ...
Definition: SX127x.cpp:1120
-
SX127x::fixedPacketLengthMode
int16_t fixedPacketLengthMode(uint8_t len=RADIOLIB_SX127X_MAX_PACKET_LENGTH_FSK)
Set modem in fixed packet length mode. Available in FSK mode only.
Definition: SX127x.cpp:1045
-
SX127x::disableAddressFiltering
int16_t disableAddressFiltering()
Disables FSK address filtering.
Definition: SX127x.cpp:919
-
SX127x::transmitDirect
int16_t transmitDirect(uint32_t frf=0) override
Enables direct transmission mode on pins DIO1 (clock) and DIO2 (data). While in direct mode,...
Definition: SX127x.cpp:295
-
SX127x::startTransmit
int16_t startTransmit(uint8_t *data, size_t len, uint8_t addr=0) override
Interrupt-driven binary transmit method. Will start transmitting arbitrary binary data up to 255 byte...
Definition: SX127x.cpp:444
-
SX127x::setBroadcastAddress
int16_t setBroadcastAddress(uint8_t broadAddr)
Sets FSK broadcast address. Calling this method will enable address filtering. Only available in FSK ...
Definition: SX127x.cpp:905
-
SX127x::getAFCError
float getAFCError()
Gets current AFC error.
Definition: SX127x.cpp:713
-
SX127x::getModemStatus
uint8_t getModemStatus()
Reads modem status. Only available in LoRa mode.
Definition: SX127x.cpp:1110
-
SX127x::randomByte
uint8_t randomByte()
Get one truly random byte from RSSI noise.
Definition: SX127x.cpp:1124
-
SX127x::standby
int16_t standby() override
Sets the LoRa module to standby.
Definition: SX127x.cpp:287
+
SX127x::receiveDirect
int16_t receiveDirect() override
Enables direct reception mode on pins DIO1 (clock) and DIO2 (data). While in direct mode,...
Definition: SX127x.cpp:319
+
SX127x::setDio0Action
void setDio0Action(void(*func)(void))
Set interrupt service routine function to call when DIO0 activates.
Definition: SX127x.cpp:417
+
SX127x::setFrequencyDeviation
int16_t setFrequencyDeviation(float freqDev) override
Sets FSK frequency deviation from carrier frequency. Allowed values depend on bit rate setting and mu...
Definition: SX127x.cpp:768
+
SX127x::startChannelScan
int16_t startChannelScan()
Interrupt-driven channel activity detection method. DIO0 will be activated when LoRa preamble is dete...
Definition: SX127x.cpp:564
+
SX127x::getDataRate
float getDataRate() const
Get data rate of the latest transmitted packet.
Definition: SX127x.cpp:735
+
SX127x::transmit
int16_t transmit(uint8_t *data, size_t len, uint8_t addr=0) override
Binary transmit method. Will transmit arbitrary binary data up to 255 bytes long using LoRa or up to ...
Definition: SX127x.cpp:142
+
SX127x::setOokFixedOrFloorThreshold
int16_t setOokFixedOrFloorThreshold(uint8_t value)
Fixed threshold for the Data Slicer in OOK mode or floor threshold for the Data Slicer in OOK when Pe...
Definition: SX127x.cpp:940
+
SX127x::setRfSwitchPins
void setRfSwitchPins(RADIOLIB_PIN_TYPE rxEn, RADIOLIB_PIN_TYPE txEn)
Some modules contain external RF switch controlled by two pins. This function gives RadioLib control ...
Definition: SX127x.cpp:1115
+
SX127x::fixedPacketLengthMode
int16_t fixedPacketLengthMode(uint8_t len=RADIOLIB_SX127X_MAX_PACKET_LENGTH_FSK)
Set modem in fixed packet length mode. Available in FSK mode only.
Definition: SX127x.cpp:1040
+
SX127x::disableAddressFiltering
int16_t disableAddressFiltering()
Disables FSK address filtering.
Definition: SX127x.cpp:914
+
SX127x::transmitDirect
int16_t transmitDirect(uint32_t frf=0) override
Enables direct transmission mode on pins DIO1 (clock) and DIO2 (data). While in direct mode,...
Definition: SX127x.cpp:290
+
SX127x::startTransmit
int16_t startTransmit(uint8_t *data, size_t len, uint8_t addr=0) override
Interrupt-driven binary transmit method. Will start transmitting arbitrary binary data up to 255 byte...
Definition: SX127x.cpp:439
+
SX127x::setBroadcastAddress
int16_t setBroadcastAddress(uint8_t broadAddr)
Sets FSK broadcast address. Calling this method will enable address filtering. Only available in FSK ...
Definition: SX127x.cpp:900
+
SX127x::getAFCError
float getAFCError()
Gets current AFC error.
Definition: SX127x.cpp:708
+
SX127x::getModemStatus
uint8_t getModemStatus()
Reads modem status. Only available in LoRa mode.
Definition: SX127x.cpp:1105
+
SX127x::randomByte
uint8_t randomByte()
Get one truly random byte from RSSI noise.
Definition: SX127x.cpp:1119
+
SX127x::standby
int16_t standby() override
Sets the LoRa module to standby.
Definition: SX127x.cpp:282
SX127x
Base class for SX127x series. All derived classes for SX127x (e.g. SX1278 or SX1272) inherit from thi...
Definition: SX127x.h:547
-
SX127x::getSNR
float getSNR()
Gets signal-to-noise ratio of the latest received packet. Only available in LoRa mode.
Definition: SX127x.cpp:729
+
SX127x::getSNR
float getSNR()
Gets signal-to-noise ratio of the latest received packet. Only available in LoRa mode.
Definition: SX127x.cpp:724
SX127x::reset
virtual void reset()=0
Reset method. Will reset the chip to the default state using RST pin. Declared pure virtual since SX1...
SX127x::begin
int16_t begin(uint8_t chipVersion, uint8_t syncWord, uint16_t preambleLength)
Initialization method. Will be called with appropriate parameters when calling initialization method ...
Definition: SX127x.cpp:12
-
SX127x::setPreambleLength
int16_t setPreambleLength(uint16_t preambleLength)
Sets LoRa or FSK preamble length. Allowed values range from 6 to 65535 in LoRa mode or 0 to 65535 in ...
Definition: SX127x.cpp:631
-
SX127x::setBitRate
int16_t setBitRate(float br)
Sets FSK bit rate. Allowed values range from 1.2 to 300 kbps. Only available in FSK mode.
Definition: SX127x.cpp:744
+
SX127x::setPreambleLength
int16_t setPreambleLength(uint16_t preambleLength)
Sets LoRa or FSK preamble length. Allowed values range from 6 to 65535 in LoRa mode or 0 to 65535 in ...
Definition: SX127x.cpp:626
+
SX127x::setBitRate
int16_t setBitRate(float br)
Sets FSK bit rate. Allowed values range from 1.2 to 300 kbps. Only available in FSK mode.
Definition: SX127x.cpp:739
PhysicalLayer
Provides common interface for protocols that run on LoRa/FSK modules, such as RTTY or LoRaWAN....
Definition: PhysicalLayer.h:14
PhysicalLayer::receive
int16_t receive(String &str, size_t len=0)
Arduino String receive method.
Definition: PhysicalLayer.cpp:100
-
SX127x::clearDio0Action
void clearDio0Action()
Clears interrupt service routine to call when DIO0 activates.
Definition: SX127x.cpp:426
-
SX127x::getIRQFlags
uint16_t getIRQFlags()
Reads currently active IRQ flags, can be used to check which event caused an interrupt....
Definition: SX127x.cpp:1095
-
SX127x::setOokPeakThresholdDecrement
int16_t setOokPeakThresholdDecrement(uint8_t value)
Period of decrement of the RSSI threshold in the OOK demodulator.
Definition: SX127x.cpp:953
-
SX127x::setRSSIConfig
int16_t setRSSIConfig(uint8_t smoothingSamples, int8_t offset=0)
Sets RSSI measurement configuration in FSK mode.
Definition: SX127x.cpp:1053
-
SX127x::setOokThresholdType
int16_t setOokThresholdType(uint8_t type)
Selects the type of threshold in the OOK data slicer.
Definition: SX127x.cpp:937
-
SX127x::setAFCBandwidth
int16_t setAFCBandwidth(float afcBw)
Sets FSK automatic frequency correction bandwidth. Allowed values range from 2.6 to 250 kHz....
Definition: SX127x.cpp:831
-
SX127x::setOOK
int16_t setOOK(bool enableOOK)
Enables/disables OOK modulation instead of FSK.
Definition: SX127x.cpp:977
-
SX127x::setFHSSHoppingPeriod
int16_t setFHSSHoppingPeriod(uint8_t freqHoppingPeriod)
Sets the hopping period and enables FHSS.
Definition: SX127x.cpp:1370
-
SX127x::setRxBandwidth
int16_t setRxBandwidth(float rxBw)
Sets FSK receiver bandwidth. Allowed values range from 2.6 to 250 kHz. Only available in FSK mode.
Definition: SX127x.cpp:815
+
SX127x::clearDio0Action
void clearDio0Action()
Clears interrupt service routine to call when DIO0 activates.
Definition: SX127x.cpp:421
+
SX127x::getIRQFlags
uint16_t getIRQFlags()
Reads currently active IRQ flags, can be used to check which event caused an interrupt....
Definition: SX127x.cpp:1090
+
SX127x::setOokPeakThresholdDecrement
int16_t setOokPeakThresholdDecrement(uint8_t value)
Period of decrement of the RSSI threshold in the OOK demodulator.
Definition: SX127x.cpp:948
+
SX127x::setRSSIConfig
int16_t setRSSIConfig(uint8_t smoothingSamples, int8_t offset=0)
Sets RSSI measurement configuration in FSK mode.
Definition: SX127x.cpp:1048
+
SX127x::setOokThresholdType
int16_t setOokThresholdType(uint8_t type)
Selects the type of threshold in the OOK data slicer.
Definition: SX127x.cpp:932
+
SX127x::setAFCBandwidth
int16_t setAFCBandwidth(float afcBw)
Sets FSK automatic frequency correction bandwidth. Allowed values range from 2.6 to 250 kHz....
Definition: SX127x.cpp:826
+
SX127x::setOOK
int16_t setOOK(bool enableOOK)
Enables/disables OOK modulation instead of FSK.
Definition: SX127x.cpp:972
+
SX127x::setFHSSHoppingPeriod
int16_t setFHSSHoppingPeriod(uint8_t freqHoppingPeriod)
Sets the hopping period and enables FHSS.
Definition: SX127x.cpp:1365
+
SX127x::setRxBandwidth
int16_t setRxBandwidth(float rxBw)
Sets FSK receiver bandwidth. Allowed values range from 2.6 to 250 kHz. Only available in FSK mode.
Definition: SX127x.cpp:810
Module
Implements all common low-level methods to control the wireless module. Every module class contains o...
Definition: Module.h:16
-
SX127x::scanChannel
int16_t scanChannel()
Performs scan for valid LoRa preamble in the current channel.
Definition: SX127x.cpp:259
-
SX127x::getFHSSHoppingPeriod
uint8_t getFHSSHoppingPeriod(void)
Gets FHSS hopping period.
Definition: SX127x.cpp:1374
-
SX127x::receive
int16_t receive(uint8_t *data, size_t len) override
Binary receive method. Will attempt to receive arbitrary binary data up to 255 bytes long using LoRa ...
Definition: SX127x.cpp:214
-
SX127x::getChipVersion
int16_t getChipVersion()
Read version SPI register. Should return SX1278_CHIP_VERSION (0x12) or SX1272_CHIP_VERSION (0x22) if ...
Definition: SX127x.cpp:1149
-
SX127x::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: SX127x.cpp:1017
+
SX127x::scanChannel
int16_t scanChannel()
Performs scan for valid LoRa preamble in the current channel.
Definition: SX127x.cpp:254
+
SX127x::getFHSSHoppingPeriod
uint8_t getFHSSHoppingPeriod(void)
Gets FHSS hopping period.
Definition: SX127x.cpp:1369
+
SX127x::receive
int16_t receive(uint8_t *data, size_t len) override
Binary receive method. Will attempt to receive arbitrary binary data up to 255 bytes long using LoRa ...
Definition: SX127x.cpp:209
+
SX127x::getChipVersion
int16_t getChipVersion()
Read version SPI register. Should return SX1278_CHIP_VERSION (0x12) or SX1272_CHIP_VERSION (0x22) if ...
Definition: SX127x.cpp:1144
+
SX127x::getPacketLength
size_t getPacketLength(bool update=true) override
Query modem for the packet length of received payload.
Definition: SX127x.cpp:1012
SX127x::SX127x
SX127x(Module *mod)
Default constructor. Called internally when creating new LoRa instance.
Definition: SX127x.cpp:4
-
SX127x::packetMode
int16_t packetMode()
Disables direct mode and enables packet mode, allowing the module to receive packets....
Definition: SX127x.cpp:361
-
SX127x::setCurrentLimit
int16_t setCurrentLimit(uint8_t currentLimit)
Sets current limit for over current protection at transmitter amplifier. Allowed values range from 45...
Definition: SX127x.cpp:607
-
SX127x::getFrequencyError
float getFrequencyError(bool autoCorrect=false)
Gets frequency error of the latest received packet.
Definition: SX127x.cpp:660
-
SX127x::getFHSSChannel
uint8_t getFHSSChannel(void)
Gets the FHSS channel in use.
Definition: SX127x.cpp:1378
+
SX127x::packetMode
int16_t packetMode()
Disables direct mode and enables packet mode, allowing the module to receive packets....
Definition: SX127x.cpp:356
+
SX127x::setCurrentLimit
int16_t setCurrentLimit(uint8_t currentLimit)
Sets current limit for over current protection at transmitter amplifier. Allowed values range from 45...
Definition: SX127x.cpp:602
+
SX127x::getFrequencyError
float getFrequencyError(bool autoCorrect=false)
Gets frequency error of the latest received packet.
Definition: SX127x.cpp:655
+
SX127x::getFHSSChannel
uint8_t getFHSSChannel(void)
Gets the FHSS channel in use.
Definition: SX127x.cpp:1373
PhysicalLayer::startTransmit
int16_t startTransmit(String &str, uint8_t addr=0)
Interrupt-driven Arduino String transmit method. Unlike the standard transmit method,...
Definition: PhysicalLayer.cpp:51